Skip to content

mpettis/csvkit_talk

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

csvkit_talk

Big set of examples (with data!) on how to use csvkit.

Introduction

csvkit is a great toolkit to help people deal with CSV files. In particular:

  • How to format CSV files into nice table-looking output without leaving the comfort of the command line.
  • How to check columns in your files for missing values and mins/maxes/means/modes in a CSV file.
  • How to get files from other formats into CSV, and how to project CSV files into other formats.
  • How to stack CSV files into one single file.
  • How to select certain columns of the file, or certain rows based on filtering critera.
  • How to treat a CSV file as a database table and issue SQL against it.

I made this repository to be a self-contained set of csvkit examples that you can test csvkit tools against. It assumes you have the following:

  • csvkit tools installed.
  • A bash command prompt with common tools, like ls, cat, less, head, and others.

You can run the examples below from a command prompt rooted in this repository's top-level directory, which will contain dat.

On why this is important

If you deal with data long enough, you will come to find that more time than you anticipated gets spent in wraingling data, rather than actually analyzing the data for the meaningful things you want out of it. Careless, or at least undocumented, data cleaning can come back to bite you. Did you see a bad value and change it? Or remove the value? Or remove the line? If you did any of these things, did you record exactly how you changed the data somewhere? You will find that these questions will inconveniently pop up, and by inconveniently, I mean usually many weeks after you have done any such cleaning and way past when you remember exactly what you did.

This is why programmatic processing of data, versus changing data in files by hand with no way of auditing the change, is a bad practice. In the best of worlds, you get perfect data and unicorns and rainbows. Second best is to be able to figure out what is wrong with the data and push back on your providers of said data to fix it to the unicorn and rainbows state.

The most common reality is that you get the data that you get, and you need to use it immediately, but will have to go back sometime in the future and argue with the data provider about the data problems. If you hand-edit data, and don't keep originals, it will be very hard to trace what happened. Sure, if you keep originals, and only edit copies, it can still have problems. Can you recall why you editied a value? Or why you changed it to the value you did? Or, if you are on a team, exactly who made the edit even?

Programmatic changes, when done right, can be better. You make cleaned copies of files, but all cleaning changes are documented as code, and you need to document your code as to why it is making the change it is. That way, you should have collected in one spot all of the things that take the data from original to clean in one place, and documented explanations along side the cleaning code.

To that end, command-line tools, which can be run in batch, that aid you in transporting, viewing, analyzing, and converting in a programmatic way help you to actually execute this best practice. csvkit is a set of tools in that process.

Data sets

The dat/ directory contains a number of datasets. I'll try to describe most of them.

  • mtcars_0<nn>.csv set of identical csv files that all have information about cars. I'll refer to all of these identical copies as mtcars below, as there will be varitions on this one main dataset for illustrative purposes.
  • mtcars_blank-out-row.csv Same as mtcars, but with one row having all of its values removed.
  • mtcars_blank-select_cells.csv. Same as mtcars, but with a few select cells blanked out.
  • mtcars_col-order-shuffle.csv Same as mtcars, but the column order is not the same.
  • mtcars_missing-first-col.csv Same as mtcars, but the first column is removed.
  • mtcars_noheader.csv Same as mtcars, but the header is removed.
  • mtcars_pipes.csv Same as mtcars, but not a CSV, as I've replaced the comma separators with the | character.
  • mtcars_tabs.csv Same as mtcars, but not a CSV, as I've replaced the comma separators with the tab character.
  • mtcars_too-many-fields.csv. Gotten by taking mtcars, removing all of the double-quotes, and replacing all spaces with commas. Effectively makes the CSV file look like it has more columns in most of the rows than what the header would indicate.
  • transposed_mtcars.csv mtcars, but rows and columns transposed.
  • wide_flights_dest_month.csv A subset of the flights dataset, built for R testing. Used as an example of a wide dataset. Found here: https://github.com/hadley/nycflights13
  • wide_mtcars.csv Redundant with transposed_mtcars.csv. Didn't realize I had this twice. One of these will be removed in the future.
  • xlsx_mtcars.xlsx An Excel file which contains mtcars data. Used to illustrate extracting CSV info from an Excel file.
  • issues.json A json file. Very wide. Likely find a better one.
  • join_<n>.csv A simple set of files with same columns and somewhat intersecting rows. Used to illustrate csvjoin.
  • long_flights.csv A long dataset for illustrative purposes.
  • mtcars.db A sqlite database to illustrate interactions of these tools with a simple database.

Examples

The most common way to look at CSV files is to open them with Excel. This is perfectly acceptable if you have Excel (or equivalent app), and you have to look at one or just a few files, and you ultimately want to save that CSV into a spreadsheet program and make other columns or information derived off of the original data.

But sometimes opening in Excel is just too heavyweight of a solution, or doing so might not help you anwer some other questions about the file that are easier done with csvkit and other command line tools. We'll look at what some of those questions might be.

Inspection

First, an easy one. Let's say you want to just look at one of the CSV files. You could open the file in Excel. Or you could look at the raw data:

The convention here is that $ is the terminal prompt, followed by the command, followed by an empty line, followed by the command output, or at least the first few lines of the output.

$ cat dat/mtcars_001.csv

"name","mpg","cyl","disp","hp","drat","wt","qsec","vs","am","gear","carb"
"Mazda RX4",21,6,160,110,3.9,2.62,16.46,0,1,4,4
"Mazda RX4 Wag",21,6,160,110,3.9,2.875,17.02,0,1,4,4
"Datsun 710",22.8,4,108,93,3.85,2.32,18.61,1,1,4,1
...

That's not really an improvement over Excel. But you do get to see the raw, underlying data. We can do a bit better with csvlook:

$ csvlook dat/mtcars_001.csv

|----------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name                | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|----------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4           | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag       | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  Datsun 710          | 22.8 | 4   | 108   | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
...

That is an improvement over the raw output, but it may just seem minimalistic. Why not just do Excel? Well, a few pros to this way:

  • You don't have to open Excel at all, which can take time, or you might not have the app handily installed where you are (like, say at a terminal with no GUI).
  • You can quickly copy and paste this into an email, format with a monospace font, and show in a minimalistic but decent way, what was in the file.

Do you miss having the numbers on the left in Excel? You can get that back too, with the -l switch:

$ csvlook -l dat/mtcars_001.csv

|--------------+---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  line_number | name                | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|--------------+---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  1           | Mazda RX4           | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  2           | Mazda RX4 Wag       | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  3           | Datsun 710          | 22.8 | 4   | 108   | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
...

Still, it seems I'm trying to sell you on a scooter when you have a racecar like Excel handy....

Combining files

So, now say you don't just have one file, but a bunch of files that should have identical columns. You'd like to look at them too. But opening each file individually in Excel seems like real drudgery. csvstack with csvlook can fix that (with the less tool thrown in there to help page through rows):

$ csvstack dat/mtcars_0*.csv | csvlook | less

|----------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name                | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|----------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4           | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag       | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  Datsun 710          | 22.8 | 4   | 108   | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|  Hornet 4 Drive      | 21.4 | 6   | 258   | 110 | 3.08 | 3.215 | 19.44 | 1  | 0  | 3    | 1     |
|  Hornet Sportabout   | 18.7 | 8   | 360   | 175 | 3.15 | 3.44  | 17.02 | 0  | 0  | 3    | 2     |
|  Valiant             | 18.1 | 6   | 225   | 105 | 2.76 | 3.46  | 20.22 | 1  | 0  | 3    | 1     |
|  Duster 360          | 14.3 | 8   | 360   | 245 | 3.21 | 3.57  | 15.84 | 0  | 0  | 3    | 4     |
...

The way csvstack works is that it just concatenates all of the rows from all of the files provided into one big output file. But it keeps only one header, not copying each header in the middle of the output. So it works the way you want it to. In this example, I specified dat/mtcars*0*.csv, which is file wildcard globbing. It will get all files in the dat/ directory that start with mtcars, has a 0 in the name, and ends with .csv. I could make a simpler one that replaces the first star with an underscore, but it is messing up my editor's intellisense stuff. So I'm using this formulation. But you can make your own.

You can pipe the csvstack output right to file if you want. In this case, I pipe it into csvlook because I just want to see it.

And you say, "Well, that's nice, but now I don't know where each row came from!" Well, you can fix that too with the --filenames switch:

$ csvstack --filenames dat/mtcars_0*.csv | csvlook | less

|-----------------+---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  group          | name                | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|-----------------+---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  mtcars_001.csv | Mazda RX4           | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  mtcars_001.csv | Mazda RX4 Wag       | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  mtcars_001.csv | Datsun 710          | 22.8 | 4   | 108   | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|  mtcars_001.csv | Hornet 4 Drive      | 21.4 | 6   | 258   | 110 | 3.08 | 3.215 | 19.44 | 1  | 0  | 3    | 1     |
|  mtcars_001.csv | Hornet Sportabout   | 18.7 | 8   | 360   | 175 | 3.15 | 3.44  | 17.02 | 0  | 0  | 3    | 2     |
|  mtcars_001.csv | Valiant             | 18.1 | 6   | 225   | 105 | 2.76 | 3.46  | 20.22 | 1  | 0  | 3    | 1     |
|  mtcars_001.csv | Duster 360          | 14.3 | 8   | 360   | 245 | 3.21 | 3.57  | 15.84 | 0  | 0  | 3    | 4     |
...

So the output will prepend the filename that the row came from.

Validation

This all helps with checking data by looking at it (and, to boot, we have a way of putting a bunch of files together that have identical column structure). But much of the time what we'd like to do is have some way to inspect the data for bad conditions that we'd like to detect, because the data is too big to eyeball such a check.

This is where csvstat can come in handy. It can check for some very common conditions about the columns of data you'd like to know about. For example, perhaps you know that none of the columns should have missing data. You can check that as:

$ csvstat --nulls dat/mtcars_001.csv

  1. name: False
  2. mpg: False
  3. cyl: False
  4. disp: False
  5. hp: False
  6. drat: False
  7. wt: False
  8. qsec: False
  9. vs: False
 10. am: False
 11. gear: False
 12. carb: False

The --nulls switch tells csvstat to check to see if each column has any null values. If a column has one or more empty values, the column will return True, otherwise, if all rows in a column have values, it returns False. In this case, no columns have missing data.

Here's an example that does:

$ csvstat --nulls dat/mtcars_blank-select_cells.csv

  1. name: True
  2. mpg: False
  3. cyl: True
  4. disp: False
  5. hp: False
  6. drat: False
  7. wt: False
  8. qsec: False
  9. vs: True
 10. am: False
 11. gear: True
 12. carb: False

Let's take a peek:

$ csvlook dat/mtcars_blank-select_cells.csv

|----------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name                | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|----------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4           | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  |      | 4     |
|  Mazda RX4 Wag       | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|                      | 22.8 | 4   | 108   | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|  Hornet 4 Drive      | 21.4 |     | 258   | 110 | 3.08 | 3.215 | 19.44 | 1  | 0  | 3    | 1     |
|  Hornet Sportabout   | 18.7 | 8   | 360   | 175 | 3.15 | 3.44  | 17.02 | 0  | 0  | 3    | 2     |
|  Valiant             | 18.1 | 6   | 225   | 105 | 2.76 | 3.46  | 20.22 | 1  | 0  | 3    | 1     |
|  Duster 360          | 14.3 | 8   | 360   | 245 | 3.21 | 3.57  | 15.84 |    | 0  | 3    | 4     |
...

Sure enough, you can pick out some blank cells. You, as a user, have to know if a column having missing values is acceptable or not.

Other stat include --min and --max. I like to use these when I know the range of values I should get. For --min, I usually use that if I know there should be no 0 values. I use --max when I know what the largest thing should be, and any errors that are a misplaced decimal will give me an order-of-magnigude error that I can quickly spot.

$ csvstat --max dat/mtcars_001.csv

  1. name: Volvo 142E
  2. mpg: 33.9
  3. cyl: 8
  4. disp: 472.0
  5. hp: 335
  6. drat: 4.93
  7. wt: 5.424
  8. qsec: 22.9
  9. vs: 1
 10. am: 1
 11. gear: 5
 12. carb: 8

If mpg was, say, 339, I'd guess we are dealing with super-efficient cars, or someone made a decimal error.

Other common errors is that a row can have a different number of columns than what the header would indicate. This can often happen with incorrect quoting of column values that have commas (if your field has commas, you need to surround that whole field in double-quotes), or fields that have double-quotes as actual strings in the field didn't have them properly escaped. What happens then is that the thing that reads the file will shove fields to incorrect columns in those problem rows.

We can detect when a row doesn't match up with the number of columns the file's header dictates with the csvclean utility. Let's try this utility on a file that has problems:

$ csvclean -n dat/mtcars_too-many-fields.csv

Line 1: Expected 12 columns, found 13 columns
Line 2: Expected 12 columns, found 14 columns
Line 3: Expected 12 columns, found 13 columns
Line 4: Expected 12 columns, found 14 columns

Here, the -n switch tells csvclean to output it's informatin back to the terminal.

For this file, the mtcars file had all of it's double-quotes stripped out and spaces replaced with commas. So names that had 2 or more space-separated words in them had those spaces turned into commas and, with no double-quotes to quote the whole thing, the CSV interpretation is that those two or more words turned into two or more columns. Which doesn't macth the number of colums based on the comma-separated headers.

The nice thing about this utility is that, without the -n switch, what it will do to a file is to process the file, put all of the good lines into a file with the same basename, but the .csv part turned into _out.csv The errors will be written to a _err.csv file. So this way you can easily inspect the errors, and also get an output file that is in good shape, but with the bad rows removed.

$ csvclean dat/mtcars_too-many-fields.csv
31 errors logged to dat/mtcars_too-many-fields_err.csv

$ head dat/mtcars_too-many-fields_out.csv
name,mpg,cyl,disp,hp,drat,wt,qsec,vs,am,gear,carb
Valiant,18.1,6,225,105,2.76,3.46,20.22,1,0,3,1

$ head dat/mtcars_too-many-fields_err.csv
line_number,msg,name,mpg,cyl,disp,hp,drat,wt,qsec,vs,am,gear,carb
1,"Expected 12 columns, found 13 columns",Mazda,RX4,21,6,160,110,3.9,2.62,16.46,0,1,4,4
2,"Expected 12 columns, found 14 columns",Mazda,RX4,Wag,21,6,160,110,3.9,2.875,17.02,0,1,4,4
3,"Expected 12 columns, found 13 columns",Datsun,710,22.8,4,108,93,3.85,2.32,18.61,1,1,4,1
...

Here, just one row made it through. That's because the Valiant name only had one name, and the others had 2 or three space-separated names, and those names looked like columns to the parser.

Importing and Exporting

Not all data comes to you in CSV form, and not all people want CSV files returned to them. Here are some examples of getting and producing non-CSV files.

Excel to CSV conversion

Getting data out of an Excel file is very easy. It is really easy if the data in the sheet you want is rectangular and starts in the A1 column. Here's an example:

$ in2csv --sheet "mtcars-s1" dat/xlsx_mtcars.xlsx

name,mpg,cyl,disp,hp,drat,wt,qsec,vs,am,gear,carb
Mazda RX4,21,6,160,110,3.9,2.62,16.46,0,1,4,4
Mazda RX4 Wag,21,6,160,110,3.9,2.875,17.02,0,1,4,4
Datsun 710,22.8,4,108,93,3.85,2.32,18.61,1,1,4,1
...

Here I knew the sheet name, and am showing the raw output. Obviously, you could pipe this through csvlook for a nicer formatting.

Be careful if the data doesn't start in cell A1. In the same file, the following sheet has data starting in cell B2:

$ in2csv --sheet "mtcars-s2" dat/xlsx_mtcars.xlsx

,,,,,,,,,,,,
,name,mpg,cyl,disp,hp,drat,wt,qsec,vs,am,gear,carb
,Mazda RX4,21,6,160,110,3.9,2.62,16.46,0,1,4,4
,Mazda RX4 Wag,21,6,160,110,3.9,2.875,17.02,0,1,4,4
,Datsun 710,22.8,4,108,93,3.85,2.32,18.61,1,1,4,1
...

Note the first column that is just a row of commas, and the first line of each row starts with a comma. This is what happens when your data doesn't start in A1. But those problems can be fixed with other command line tools.

Alternate delimiters

There are files that are close kin of CSV files. They difference is that they don't use commas as field separators, but other characters. Common ones are semi-colons, pipes (|), and tab characters. With the -d switch, you can specify what that seperator character is:

Pipes:

$ head dat/mtcars_pipes.csv

"name"|"mpg"|"cyl"|"disp"|"hp"|"drat"|"wt"|"qsec"|"vs"|"am"|"gear"|"carb"
"Mazda RX4"|21|6|160|110|3.9|2.62|16.46|0|1|4|4
"Mazda RX4 Wag"|21|6|160|110|3.9|2.875|17.02|0|1|4|4
"Datsun 710"|22.8|4|108|93|3.85|2.32|18.61|1|1|4|1
"Hornet 4 Drive"|21.4|6|258|110|3.08|3.215|19.44|1|0|3|1
"Hornet Sportabout"|18.7|8|360|175|3.15|3.44|17.02|0|0|3|2
"Valiant"|18.1|6|225|105|2.76|3.46|20.22|1|0|3|1
"Duster 360"|14.3|8|360|245|3.21|3.57|15.84|0|0|3|4
"Merc 240D"|24.4|4|146.7|62|3.69|3.19|20|1|0|4|2
"Merc 230"|22.8|4|140.8|95|3.92|3.15|22.9|1|0|4|2



$ in2csv -d\| dat/mtcars_pipes.csv | head

name,mpg,cyl,disp,hp,drat,wt,qsec,vs,am,gear,carb
Mazda RX4,21.0,6,160.0,110,3.9,2.62,16.46,0,1,4,4
Mazda RX4 Wag,21.0,6,160.0,110,3.9,2.875,17.02,0,1,4,4
Datsun 710,22.8,4,108.0,93,3.85,2.32,18.61,1,1,4,1
Hornet 4 Drive,21.4,6,258.0,110,3.08,3.215,19.44,1,0,3,1
Hornet Sportabout,18.7,8,360.0,175,3.15,3.44,17.02,0,0,3,2
Valiant,18.1,6,225.0,105,2.76,3.46,20.22,1,0,3,1
Duster 360,14.3,8,360.0,245,3.21,3.57,15.84,0,0,3,4
Merc 240D,24.4,4,146.7,62,3.69,3.19,20.0,1,0,4,2
Merc 230,22.8,4,140.8,95,3.92,3.15,22.9,1,0,4,2

Tabs (weird white spacing is tabs):

$ head dat/mtcars_tabs.csv

"name"	"mpg"	"cyl"	"disp"	"hp"	"drat"	"wt"	"qsec"	"vs"	"am"	"gear"	"carb"
"Mazda RX4"	21	6	160	110	3.9	2.62	16.46	0	1	4	4
"Mazda RX4 Wag"	21	6	160	110	3.9	2.875	17.02	0	1	4	4
"Datsun 710"	22.8	4	108	93	3.85	2.32	18.61	1	1	4	1
"Hornet 4 Drive"	21.4	6	258	110	3.08	3.215	19.44	1	0	3	1
"Hornet Sportabout"	18.7	8	360	175	3.15	3.44	17.02	0	0	3	2
"Valiant"	18.1	6	225	105	2.76	3.46	20.22	1	0	3	1
"Duster 360"	14.3	8	360	245	3.21	3.57	15.84	0	0	3	4
"Merc 240D"	24.4	4	146.7	62	3.69	3.19	20	1	0	4	2
"Merc 230"	22.8	4	140.8	95	3.92	3.15	22.9	1	0	4	2



$ in2csv -t dat/mtcars_tabs.csv | head

name,mpg,cyl,disp,hp,drat,wt,qsec,vs,am,gear,carb
Mazda RX4,21.0,6,160.0,110,3.9,2.62,16.46,0,1,4,4
Mazda RX4 Wag,21.0,6,160.0,110,3.9,2.875,17.02,0,1,4,4
Datsun 710,22.8,4,108.0,93,3.85,2.32,18.61,1,1,4,1
Hornet 4 Drive,21.4,6,258.0,110,3.08,3.215,19.44,1,0,3,1
Hornet Sportabout,18.7,8,360.0,175,3.15,3.44,17.02,0,0,3,2
Valiant,18.1,6,225.0,105,2.76,3.46,20.22,1,0,3,1
Duster 360,14.3,8,360.0,245,3.21,3.57,15.84,0,0,3,4
Merc 240D,24.4,4,146.7,62,3.69,3.19,20.0,1,0,4,2
Merc 230,22.8,4,140.8,95,3.92,3.15,22.9,1,0,4,2

You can output CSV files to these formats in a similar way, with csvformat:

$ csvformat -D\| dat/mtcars_001.csv | head

name|mpg|cyl|disp|hp|drat|wt|qsec|vs|am|gear|carb
Mazda RX4|21|6|160|110|3.9|2.62|16.46|0|1|4|4
Mazda RX4 Wag|21|6|160|110|3.9|2.875|17.02|0|1|4|4
Datsun 710|22.8|4|108|93|3.85|2.32|18.61|1|1|4|1
Hornet 4 Drive|21.4|6|258|110|3.08|3.215|19.44|1|0|3|1
Hornet Sportabout|18.7|8|360|175|3.15|3.44|17.02|0|0|3|2
Valiant|18.1|6|225|105|2.76|3.46|20.22|1|0|3|1
Duster 360|14.3|8|360|245|3.21|3.57|15.84|0|0|3|4
Merc 240D|24.4|4|146.7|62|3.69|3.19|20|1|0|4|2
Merc 230|22.8|4|140.8|95|3.92|3.15|22.9|1|0|4|2



$ csvformat -T dat/mtcars_001.csv | head

name	mpg	cyl	disp	hp	drat	wt	qsec	vs	am	gear	carb
Mazda RX4	21	6	160	110	3.9	2.62	16.46	0	1	4	4
Mazda RX4 Wag	21	6	160	110	3.9	2.875	17.02	0	1	4	4
Datsun 710	22.8	4	108	93	3.85	2.32	18.61	1	1	4	1
Hornet 4 Drive	21.4	6	258	110	3.08	3.215	19.44	1	0	3	1
Hornet Sportabout	18.7	8	360	175	3.15	3.44	17.02	0	0	3	2
Valiant	18.1	6	225	105	2.76	3.46	20.22	1	0	3	1
Duster 360	14.3	8	360	245	3.21	3.57	15.84	0	0	3	4
Merc 240D	24.4	4	146.7	62	3.69	3.19	20	1	0	4	2
Merc 230	22.8	4	140.8	95	3.92	3.15	22.9	1	0	4	2

You can output CSV to json with csvjson:

$ csvjson -i 4 dat/mtcars_001.csv | head
[
    {
        "name": "Mazda RX4",
        "mpg": "21",
        "cyl": "6",
        "disp": "160",
        "hp": "110",
        "drat": "3.9",
        "wt": "2.62",
        "qsec": "16.46",

Bash analogs: csvcut, csvgrep, csvsort

These 3 utilities have analogs in the bash utilities cut, grep, and sort. The original utilites aren't quite what is wanted, because these bash utilites don't natively have the concept of a header row, and so treat the header row as if it was just another data row. So these utilities come in... We'll do some abbreviated examples.

    # csvcut: show the column name to index map
$ csvcut -n dat/mtcars_001.csv

  1: name
  2: mpg
  3: cyl
  4: disp
  5: hp
  6: drat
  7: wt
  8: qsec
  9: vs
 10: am
 11: gear
 12: carb


    # cut by index number
$ csvcut -c1,11 dat/mtcars_001.csv | head -4 | csvlook

|----------------+-------|
|  name          | gear  |
|----------------+-------|
|  Mazda RX4     | 4     |
|  Mazda RX4 Wag | 4     |
|  Datsun 710    | 4     |
|----------------+-------|

    # cut by name
$ csvcut -c "name,gear" dat/mtcars_001.csv | head -4 | csvlook

|----------------+-------|
|  name          | gear  |
|----------------+-------|
|  Mazda RX4     | 4     |
|  Mazda RX4 Wag | 4     |
|  Datsun 710    | 4     |
|----------------+-------|


    # grep by pure substring
$ csvgrep -c name -m "azd" dat/mtcars_001.csv | csvlook

|----------------+-----+-----+------+-----+------+-------+-------+----+----+------+-------|
|  name          | mpg | cyl | disp | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|----------------+-----+-----+------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4     | 21  | 6   | 160  | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag | 21  | 6   | 160  | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|----------------+-----+-----+------+-----+------+-------+-------+----+----+------+-------|



    # grep by pattern
    # This pattern says "all rows where 'a' is the second letter in the name column
$ csvgrep -c name -r "^.a" dat/mtcars_001.csv | csvlook

|---------------------+------+-----+------+-----+------+-------+-------+----+----+------+-------|
|  name               | mpg  | cyl | disp | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|---------------------+------+-----+------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4          | 21   | 6   | 160  | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag      | 21   | 6   | 160  | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  Datsun 710         | 22.8 | 4   | 108  | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|  Valiant            | 18.1 | 6   | 225  | 105 | 2.76 | 3.46  | 20.22 | 1  | 0  | 3    | 1     |
|  Cadillac Fleetwood | 10.4 | 8   | 472  | 205 | 2.93 | 5.25  | 17.98 | 0  | 0  | 3    | 4     |
|  Camaro Z28         | 13.3 | 8   | 350  | 245 | 3.73 | 3.84  | 15.41 | 0  | 0  | 3    | 4     |
|  Maserati Bora      | 15   | 8   | 301  | 335 | 3.54 | 3.57  | 14.6  | 0  | 1  | 5    | 8     |
|---------------------+------+-----+------+-----+------+-------+-------+----+----+------+-------|

    # sort
    # original order
$ head -4 dat/mtcars_001.csv | csvlook

|----------------+------+-----+------+-----+------+-------+-------+----+----+------+-------|
|  name          | mpg  | cyl | disp | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|----------------+------+-----+------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4     | 21   | 6   | 160  | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag | 21   | 6   | 160  | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  Datsun 710    | 22.8 | 4   | 108  | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|----------------+------+-----+------+-----+------+-------+-------+----+----+------+-------|

    # after sorting by name
$ csvsort -c name dat/mtcars_001.csv | head -4 | csvlook

|---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name               | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  AMC Javelin        | 15.2 | 8   | 304.0 | 150 | 3.15 | 3.435 | 17.3  | 0  | 0  | 3    | 2     |
|  Cadillac Fleetwood | 10.4 | 8   | 472.0 | 205 | 2.93 | 5.25  | 17.98 | 0  | 0  | 3    | 4     |
|  Camaro Z28         | 13.3 | 8   | 350.0 | 245 | 3.73 | 3.84  | 15.41 | 0  | 0  | 3    | 4     |
|---------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|

Chaining together in a pipeline

These tools read from stdin and write to stdout by design, so that they may work and play with some of the other command-line tools. You can start to piece together some really powerful checks by using other bash tools:

Note: the '>' are not part of the command -- those come from bash knowing that the command hasn't been ended, so waits for you to enter a complete command. Like the $ sign, you need to remove them before copy and pasting them into a shell.

Here is an easy way to just look at a set of first lines of files. If you expect them to all have the same header, then all of these columns should have identical values.

$ for f in $(ls dat/mtcars_00*.csv); do
>     head -1 $f
> done | csvlook -H

|----------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|
|  column1 | column2 | column3 | column4 | column5 | column6 | column7 | column8 | column9 | column10 | column11 | column12  |
|----------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|----------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|

Throw in a known file that lacks a header.

gshuf is the GNU shuffle (shuf) utility. Used here so that the rows are shuffled, and the one bad line probably doesn't show up at the bottom always.

$ for f in $(ls dat/mtcars_00*.csv dat/mtcars_noheader.csv | gshuf); do
>     head -1 $f
> done | csvlook -H
|------------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|
|  column1   | column2 | column3 | column4 | column5 | column6 | column7 | column8 | column9 | column10 | column11 | column12  |
|------------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  Mazda RX4 | 21      | 6       | 160     | 110     | 3.9     | 2.62    | 16.46   | 0       | 1        | 4        | 4         |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name      | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|------------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|

Scan for headers that might be out of order:

$ for f in $(ls dat/mtcars_00*.csv dat/mtcars_col-order-shuffle.csv | gshuf); do
>     head -1 $f
> done | csvlook -H

|----------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|
|  column1 | column2 | column3 | column4 | column5 | column6 | column7 | column8 | column9 | column10 | column11 | column12  |
|----------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|  mpg     | name    | disp    | cyl     | carb    | drat    | wt      | qsec    | vs      | am       | gear     | hp        |
|  name    | mpg     | cyl     | disp    | hp      | drat    | wt      | qsec    | vs      | am       | gear     | carb      |
|----------+---------+---------+---------+---------+---------+---------+---------+---------+----------+----------+-----------|

An alternate way that doesn't use csvkit. This will grab all of the headers, and then count up the number of times that particular header (as an ordered string) occurrs in the files. If all of the headers are the same, there will be one line with just that count of headers. If there is more than one header, the unique header strings and counts will be shown:

$ for f in $(ls dat/mtcars_00*.csv dat/mtcars_col-order-shuffle.csv | gshuf); do
>     head -1 $f
> done | sort | uniq -c
   1 "mpg","name","disp","cyl","carb","drat","wt","qsec","vs","am","gear","hp"
   9 "name","mpg","cyl","disp","hp","drat","wt","qsec","vs","am","gear","carb"

Note here that one header sequence occurred 9 times, and one time the top line header string occurred.

This is a nice command that loops over files, and then echos the filename and then a quick peek at the top rows of each named file. This is a nice skeleton if you want multiple operations on the same file, with outputs, all grouped together.

$ for f in $(ls dat/mtcars_00*.csv dat/mtcars_blank-select_cells.csv dat/mtcars_blank-out-row.csv dat/mtcars_noheader.csv | gshuf); do
>     echo
>     echo
>     echo "-----"
>     echo "file: " $f
>     echo
>     head $f | csvlook
> done | less


-----
file:  dat/mtcars_009.csv

|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name              | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4         | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag     | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
...

SQL utilities

SQL is a major other way of getting at and storing data. csvkit allows you to do some nice things with SQL, such as:

  • Issue a select statement against a database and return the result set as CSV format
  • Treat a CSV file as if it were a table in a database, and issue SQL against it.
  • Insert CSV file data into a table in a database.
  • Generate CREATE statements for a CSV table base on inferred information about the CSV column names and types.

Issue selects against a database

You will need to have this installed on your system to perform these commands.

csvkit supports multiple databases to query against. We'll use sqlite as an example.

In dat/mtcars.db there is a table called mtcarstbl. This is just the mtcars CSV file already loaded into that table on this database.

Issuing a select statement is easy, once you have the connection string to the database:

$ sql2csv --db "sqlite:///dat/mtcars.db" --query "select * from mtcarstbl" | head | csvlook

|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name              | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4         | 21   | 6   | 160   | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag     | 21   | 6   | 160   | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  Datsun 710        | 22.8 | 4   | 108   | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|  Hornet 4 Drive    | 21.4 | 6   | 258   | 110 | 3.08 | 3.215 | 19.44 | 1  | 0  | 3    | 1     |
|  Hornet Sportabout | 18.7 | 8   | 360   | 175 | 3.15 | 3.44  | 17.02 | 0  | 0  | 3    | 2     |
|  Valiant           | 18.1 | 6   | 225   | 105 | 2.76 | 3.46  | 20.22 | 1  | 0  | 3    | 1     |
|  Duster 360        | 14.3 | 8   | 360   | 245 | 3.21 | 3.57  | 15.84 | 0  | 0  | 3    | 4     |
|  Merc 240D         | 24.4 | 4   | 146.7 | 62  | 3.69 | 3.19  | 20    | 1  | 0  | 4    | 2     |
|  Merc 230          | 22.8 | 4   | 140.8 | 95  | 3.92 | 3.15  | 22.9  | 1  | 0  | 4    | 2     |
|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|

Treat a CSV file as if it were a database table

csvkit can make an in-memory database on the fly, and you can use this to treat a CSV file as if it were a table in that database. Which means you can issue SQL against it, and all of the power that that entails. Here we just compute the mean of the mpg column for illustration.

$ csvsql --query "select avg(mpg) as mean_mpg from mtcars_001" dat/mtcars_001.csv

mean_mpg
20.090625

Insert into a database

The test table doesn't exist in this database prior to issuing the --insert statement. After that, the data is inserted, and you can query it.

$ csvsql --db "sqlite:///dat/mtcars.db" --table "test" --insert dat/mtcars_001.csv

$ sql2csv --db "sqlite:///dat/mtcars.db" --query "select * from test" | head | csvlook

|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  name              | mpg  | cyl | disp  | hp  | drat | wt    | qsec  | vs | am | gear | carb  |
|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|
|  Mazda RX4         | 21.0 | 6   | 160.0 | 110 | 3.9  | 2.62  | 16.46 | 0  | 1  | 4    | 4     |
|  Mazda RX4 Wag     | 21.0 | 6   | 160.0 | 110 | 3.9  | 2.875 | 17.02 | 0  | 1  | 4    | 4     |
|  Datsun 710        | 22.8 | 4   | 108.0 | 93  | 3.85 | 2.32  | 18.61 | 1  | 1  | 4    | 1     |
|  Hornet 4 Drive    | 21.4 | 6   | 258.0 | 110 | 3.08 | 3.215 | 19.44 | 1  | 0  | 3    | 1     |
|  Hornet Sportabout | 18.7 | 8   | 360.0 | 175 | 3.15 | 3.44  | 17.02 | 0  | 0  | 3    | 2     |
|  Valiant           | 18.1 | 6   | 225.0 | 105 | 2.76 | 3.46  | 20.22 | 1  | 0  | 3    | 1     |
|  Duster 360        | 14.3 | 8   | 360.0 | 245 | 3.21 | 3.57  | 15.84 | 0  | 0  | 3    | 4     |
|  Merc 240D         | 24.4 | 4   | 146.7 | 62  | 3.69 | 3.19  | 20.0  | 1  | 0  | 4    | 2     |
|  Merc 230          | 22.8 | 4   | 140.8 | 95  | 3.92 | 3.15  | 22.9  | 1  | 0  | 4    | 2     |
|--------------------+------+-----+-------+-----+------+-------+-------+----+----+------+-------|

Generate CREATE statements

csvkit can make a really good stab at CREATE statement for your database of choice based on column names and values. Here's an example:

$ csvsql -i oracle --table mtcars dat/mtcars_001.csv

CREATE TABLE mtcars (
	name VARCHAR2(19 CHAR) NOT NULL,
	mpg FLOAT NOT NULL,
	cyl INTEGER NOT NULL,
	disp FLOAT NOT NULL,
	hp INTEGER NOT NULL,
	drat FLOAT NOT NULL,
	wt FLOAT NOT NULL,
	qsec FLOAT NOT NULL,
	vs INTEGER NOT NULL,
	am INTEGER NOT NULL,
	gear INTEGER NOT NULL,
	carb INTEGER NOT NULL
);

Summary

Using csvkit, along with other command-line tools, can help you efficiently deal with a lot of questions and problems with data, especially CSV-centric data. Many function you might run to Excel (or open-source software) for can be done more efficiently with these tools.

About

Talk on csvkit

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages