microsoft · github-actions · Dec 11, 2023 · Dec 11, 2023
diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.cs.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.cs.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">Ve výchozím nastavení spouští MSTest testy sekvenčně, což může vést k omezení výkonu serveru. Doporučuje se povolit atribut sestavení Parallelize nebo explicitně použít atribut DoNotParallelize na úrovni sestavení, pokud je známo, že sestavení není paralelizovatelné.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Explicitně povolit nebo zakázat paralelizaci testů</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Povolit paralelizaci testů</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.de.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.de.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">Standardmäßig führt MSTest Tests sequentiell aus, was zu erheblichen Leistungseinschränkungen führen kann. Es wird empfohlen, das Assembly-Attribut "Parallelize" zu aktivieren oder, wenn bekannt ist, dass die Assembly nicht parallelisierbar ist, explizit das Assembly-Attribut "DoNotParallelize" zu verwenden.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Parallelisierung von Tests explizit aktivieren oder deaktivieren</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Parallelisierung von Tests aktivieren</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.es.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.es.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">De manera predeterminada, MSTest ejecuta pruebas secuencialmente, lo que puede provocar una limitación del rendimiento del servidor. Se recomienda habilitar el atributo de ensamblado ''Parallelize'' o, si se sabe que el ensamblado no se puede paralelizar, usar explícitamente el atributo de nivel de ensamblado ''DoNotParallelize''.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Habilitar o deshabilitar explícitamente la paralelización de pruebas</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Habilitar paralelización de pruebas</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.fr.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.fr.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">Par défaut, MSTest exécute des tests séquentiels, ce qui peut entraîner une limitation des performances de séparation. Il est recommandé d’activer l’attribut d’assembly « Parallelize » ou, si l’assembly est connu pour ne pas être parallélisable, d’utiliser explicitement l’attribut de niveau assembly « DoNotParallelize ».</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Activer ou désactiver explicitement la parallélisation des tests</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Activer la parallélisation des tests</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.it.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.it.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">Per impostazione predefinita, MSTest esegue i test in modo sequenziale, portando a eventuali limiti delle prestazioni del server. È consigliabile abilitare l'attributo di assembly 'Parallelize' o, se l'assembly non è parallelizzabile, usare in modo esplicito l'attributo a livello di assembly 'DoNotParallelize'.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Abilitare o disabilitare in modo esplicito la parallelizzazione dei test</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Abilitare parallelizzazione dei test</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.ja.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.ja.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">既定では、MSTest はテストを順番に実行するため、サーバーのパフォーマンスの制限が生じる可能性があります。アセンブリ属性 'Parallelize' を有効にするか、アセンブリが並列化できないことがわかっている場合は、アセンブリ レベル属性 'DoNotParallelize' を明示的に使用することをお勧めします。</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">テストの並列化を明示的に有効または無効にする</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">テストの並列化を有効にする</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.ko.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.ko.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">기본적으로 MSTest는 순차적으로 테스트를 실행하므로 심각도 성능 제한이 발생할 수 있습니다. 어셈블리 특성 'Parallelize'를 사용하도록 설정하거나 어셈블리를 병렬화할 수 없는 것으로 알려진 경우 어셈블리 수준 특성 'DoNotParallelize'를 명시적으로 사용하는 것이 좋습니다.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">테스트 병렬 처리를 명시적으로 사용하거나 사용하지 않도록 설정</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">테스트 병렬화 사용</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.pl.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.pl.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">Domyślnie narzędzie MSTest uruchamia testy sekwencyjnie, co może prowadzić do ograniczenia wydajności serwerów. Zaleca się włączenie atrybutu zestawu „Parallelize” lub jeśli zestaw nie może być równoległy, aby użyć jawnie atrybutu poziomu zestawu „DoNotParallelize”.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Jawne włączanie lub wyłączanie równoległości testów</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Włączanie równoległości testów</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.pt-BR.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.pt-BR.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">Por padrão, o MSTest executa testes sequencialmente, o que pode levar à limitação de desempenho do servidor. É recomendável habilitar o atributo de assembly "Parallelize" ou se o assembly for conhecido por não ser paralelizável, para usar explicitamente o atributo de nível de assembly "DoNotParallelize".</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Habilitar ou desabilitar explicitamente a paralelização de testes</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Habilitar paralelização de testes</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>

diff --git a/src/Analyzers/MSTest.Analyzers/xlf/Resources.ru.xlf b/src/Analyzers/MSTest.Analyzers/xlf/Resources.ru.xlf
@@ -4,17 +4,17 @@
     <body>
       <trans-unit id="UseParallelizeAttributeAnalyzerDescription">
         <source>By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</source>
-        <target state="needs-review-translation">По умолчанию MSTest выполняет тесты последовательно, что может привести к ограничению производительности сервера. Рекомендуется включить атрибут сборки "Parallelize" или явно использовать атрибут уровня сборки "DoNotParallelize", если известно, что сборка не поддерживает параллелизацию.</target>
+        <target state="new">By default, MSTest runs tests sequentially which can lead to severe performance limitations. It is recommended to enable assembly attribute 'Parallelize' or if the assembly is known to not be parallelizable, to use explicitly the assembly level attribute 'DoNotParallelize'.</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerMessageFormat">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Явное включение или отключение параллелизации тестов</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
       <trans-unit id="UseParallelizeAttributeAnalyzerTitle">
         <source>Explicitly enable or disable tests parallelization</source>
-        <target state="needs-review-translation">Включить параллелизацию тестов</target>
+        <target state="new">Explicitly enable or disable tests parallelization</target>
         <note />
       </trans-unit>
     </body>