Skip to content
Build Snapshot

ci: enable workflow dispatch for triggering boxlang tests and reinsta… #30

Sign in to view logs

ci: enable workflow dispatch for triggering boxlang tests and reinsta…

ci: enable workflow dispatch for triggering boxlang tests and reinsta… #30

Triggered via push February 4, 2025 04:10
@otisnadootisnado
pushed dd4aaeb
development
Status Failure
Total duration 4m 51s
Artifacts 13

snapshot.yml

on: push
Matrix: tests / Tests
Code Auto-Formatting
24s
Code Auto-Formatting
release  /  Build & Publish
release / Build & Publish
release  /  Prep Next Release
release / Prep Next Release
Fit to window
Zoom out
Zoom in

Annotations

977 errors, 10 warnings, and 13 notices
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (adobe@2018, ^6.0.0, false)
Process completed with exit code 1.
tests / Tests (be, adobe@2018, true)
Process completed with exit code 1.
tests / Tests (adobe@2018, ^7.0.0, false)
Process completed with exit code 1.
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (adobe@2023, ^6.0.0, false)
Process completed with exit code 1.
tests / Tests (adobe@2021, ^6.0.0, false)
Process completed with exit code 1.
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can allow a secure() function if permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secure() method can block a secure() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can allow a secureAll() function if all permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with invalid permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureAll() method can block a secureAll() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can allow a secureNone() function if all permissions are not found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with found permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureNone() method can block a secureNone() call with a custom message (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a boolean true is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a boolean false is passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can secure if a closure executes as true (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureWhen() method can allow if a closure executes as false (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can secure if the logged in user is not the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model blocking methods secureSameUser() method can allow if the logged in user is the user passed (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can be created and user storage configured (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (adobe@2023, ^7.0.0, false)
Process completed with exit code 1.
tests / Tests (be, adobe@2021, true)
Process completed with exit code 1.
CBSecurity Basic Auth User Service can dispense new users (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by id (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve a valid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can retrieve an invalid user by username (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can validate valid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Basic Auth User Service can invalidate invalid user credentials (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security should load the rules from inline declaration (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct action of redirect with no explicit rule actions Then it should do a global redirect using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a put or post Then it should do allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a secure event of public with a put,post http method constraint When when logged in and using a GET Then it should NOT allow it to be executed (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action and no explicit rule actions Then it should default to a redirect action to the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given a direct override action with no explicit rule actions Then it should override using the global setting for invalid authentication (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using an overrideEvent rule action Then it should override using the overrideEvent element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Given no direct action but using a redirect rule action Then it should redirect using the redirect element (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event Then it should redirect to the modules invalidAuthenticationEvent redirect setting (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module secured event with an override action Then it should override to the modules invalidAuthenticationEvent (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Rule based Security Module cbsecurity integrations Given a module unload call Then it should unload module rules if the module is unloaded (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given a public handler and action Then it should execute it (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and a non-annotated action Then it should block and redirect (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action Then it should block and redirect as well (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action and a valid access Then it should allow access (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security module Annotation based Security Given A secured annotated handler and an annotated action with invalid auth Then it should allow access to handler but not to action (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can generate both access and refresh tokens with a valid user (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens via the rc (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens can discover refresh tokens and produce an empty result when none passed (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…fresh is on and no access or refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set… access token is sent but no refresh token is sent Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…Then the validation should pass and we should return our two new tokens as headers (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can auto refresh tokens by using the autoRefreshValidator set…access token is sent with an expired refresh token Then the validation should fail (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given The endpoint is disabled Then it should 404 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint but no refresh tokens passed Then it should 400 a response (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An ac…nt and a valid refresh token Then it should 200 a response with new refresh tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I can refresh tokens via the /refreshtoken endpoint Given An activated endpoint and an invalid refresh token Then it should kick me out (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…t should create new access and refresh tokens and invalidate the old refresh token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (adobe@2021, ^7.0.0, false)
Process completed with exit code 1.
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given any custom claims Then it should pass them on to the new tokens (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…a function or closure Then it should evaluate them right before encoding the token (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…ms on the attempt method Then the claims should be passed on to the refresh method (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method…omClaims method on user Then it should pass the current payload in to the function (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an invalid refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Feature: CBSecurity refresh tokens Story: I want to refresh tokens manually via the refreshToken() method Given an expired refresh token Then an exception should be thrown (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given no jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an empty jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an invalid jwt token and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token with no required claims and accessing a secure api call Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token that's expired Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token put in to storage Then it should use the exp on the token for the storage timeout (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token but it is not in the storage Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given an valid jwt token but with an invalid user Then it should block with no authorization (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Given a valid jwt token in all senses Then it should allow the call (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
JWT Security Services Story: I want to invalidate all tokens in the storage Given a valid jwt token and a invalidate all is issued Then the storage should be empty (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Integrations can retrieve user,auth and mixin services (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (be, adobe@2023, true)
Process completed with exit code 1.
tests.specs.integration.BasicAuthUserService (tests.specs.integration.BasicAuthUserService) with error: tests.specs.integration.BasicAuthUserService#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests.specs.integration.CBSecuritySpec (tests.specs.integration.CBSecuritySpec) with error: tests.specs.integration.CBSecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests.specs.integration.JWTSpec (tests.specs.integration.JWTSpec) with error: tests.specs.integration.JWTSpec#L0
test-harness/tests/results/test-results-junit.xml [took 1s]
tests.specs.integration.SecuritySpec (tests.specs.integration.SecuritySpec) with error: tests.specs.integration.SecuritySpec#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests.specs.unit.CBSecurityTest (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 2s]
tests.specs.unit.SecurityTest (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (be, boxlang@1, true)
Process completed with exit code 1.
Security Interceptor Unit Tests can configure with default settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can configure with invalid settings and throw exceptions (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can load a valid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests can detect an invalid validator (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests does not enable invalid event handler processing on Coldbox versions 6+ (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests enables invalid event handler processing on Coldbox versions prior to 6 (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load JSON Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load XML Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests It can load many types of rules can load model Rules (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load JSON Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load XML Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
Security Interceptor Unit Tests module settings rule loading can load model Rules based on module settings (tests.specs.unit.SecurityTest) with error: tests.specs.unit.SecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can be created (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model can create random passwords (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via has() can verify true if the user has one of many permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify true if the user has one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has no permissions (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via all() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify true if the user doesn't have one permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has a permission (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via none() can verify false if the user has one of many permission only (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can validate when passing the same user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model verification via sameUser() can invalidate when passing a different user (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods when() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the sucess closure when the permissions pass (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can call the fail closure when the permissions fail (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenAll() methods can ignore the success when the permissions fail and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the sucess closure when the permissions are none (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can call the fail closure when the permissions are found (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
CBSecurity Model action context methods whenNone() methods can ignore the success when the permissions are found and no fail has been provided (tests.specs.unit.CBSecurityTest) with error: tests.specs.unit.CBSecurityTest#L0
test-harness/tests/results/test-results-junit.xml [took 0s]
tests / Tests (adobe@2018, ^6.0.0, false)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (be, adobe@2018, true)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (adobe@2018, ^7.0.0, false)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (adobe@2023, ^6.0.0, false)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (adobe@2021, ^6.0.0, false)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (adobe@2023, ^7.0.0, false)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (be, adobe@2021, true)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (adobe@2021, ^7.0.0, false)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (be, adobe@2023, true)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
tests / Tests (be, boxlang@1, true)
No files were found with the provided path: .engine/**/logs/* .engine/**/WEB-INF/cfusion/logs/*. No artifacts will be uploaded.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
103 tests found
There are 103 tests, see "Raw output" for the full list of tests.
6 tests found
There are 6 tests, see "Raw output" for the full list of tests.

Artifacts

Produced during runtime
Name Size
test-results-adobe@2018-^6.0.0
534 KB
test-results-adobe@2018-^7.0.0
534 KB
test-results-adobe@2018-be
534 KB
test-results-adobe@2021-^6.0.0
99.4 KB
test-results-adobe@2021-^7.0.0
99.3 KB
test-results-adobe@2021-be
99.3 KB
test-results-adobe@2023-^6.0.0
99.2 KB
test-results-adobe@2023-^7.0.0
99.5 KB
test-results-adobe@2023-be
99.3 KB
test-results-boxlang@1-be
9.03 KB
test-results-lucee@5-^6.0.0
13.8 KB
test-results-lucee@5-^7.0.0
13.9 KB
test-results-lucee@5-be
13.8 KB