maybe the steps are enough...

README.md

@@ -59,48 +59,7 @@ As last step I've changed to VID to 0x2341 and the PID to 0xA001.
 
 In the end it looks something like this.
 -> This is only an example and for private use only because you have to pay for official/commercial VIDs and PIDs!!!!
-```
-leonardo_truckshifter.name=Arduino Leonardo (TruckShifter)
-leonardo_truckshifter.vid.0=0x2341
-leonardo_truckshifter.pid.0=0x0036
-leonardo_truckshifter.vid.1=0x2341
-leonardo_truckshifter.pid.1=0x8036
-leonardo_truckshifter.vid.2=0x2A03
-leonardo_truckshifter.pid.2=0x0036
-leonardo_truckshifter.vid.3=0x2A03
-leonardo_truckshifter.pid.3=0x8036
-leonardo_truckshifter.vid.4=0x2341
-leonardo_truckshifter.pid.4=0xA001
-
-leonardo_truckshifter.upload.tool=avrdude
-leonardo_truckshifter.upload.protocol=avr109
-leonardo_truckshifter.upload.maximum_size=28672
-leonardo_truckshifter.upload.maximum_data_size=2560
-leonardo_truckshifter.upload.speed=57600
-leonardo_truckshifter.upload.disable_flushing=true
-leonardo_truckshifter.upload.use_1200bps_touch=true
-leonardo_truckshifter.upload.wait_for_upload_port=true
-
-leonardo_truckshifter.bootloader.tool=avrdude
-leonardo_truckshifter.bootloader.low_fuses=0xff
-leonardo_truckshifter.bootloader.high_fuses=0xd8
-leonardo_truckshifter.bootloader.extended_fuses=0xcb
-leonardo_truckshifter.bootloader.file=caterina/Caterina-Leonardo.hex
-leonardo_truckshifter.bootloader.unlock_bits=0x3F
-leonardo_truckshifter.bootloader.lock_bits=0x2F
-
-leonardo_truckshifter.build.mcu=atmega32u4
-leonardo_truckshifter.build.f_cpu=16000000L
-#leonardo_truckshifter.build.vid=0x2341
-#leonardo_truckshifter.build.pid=0x8036
-leonardo_truckshifter.build.vid=0x2341
-leonardo_truckshifter.build.pid=0xA001
-leonardo_truckshifter.build.usb_product="Arduino Leonardo (TruckShifter, 0x2341/0xA001)"
-leonardo_truckshifter.build.board=AVR_LEONARDO
-leonardo_truckshifter.build.core=arduino
-leonardo_truckshifter.build.variant=leonardo
-leonardo_truckshifter.build.extra_flags={build.usb_flags}
-```
+
 
 HINT: Arduino IDE uses different boards.txt - one is located in your installation-folder under hardware\arduino\avr and the other under %LOCALAPPDATA%\Arduino15\packages\arduino\hardware\avr\1.8.4 (at least on windows - versions may change).