Messenger provides a message bus with the ability to send messages and then handle them immediately in your application or send them through transports (e.g. queues) to be handled later. To learn more deeply about it, read the :doc:`Messenger component docs </components/messenger>`.
In applications using :ref:`Symfony Flex <symfony-flex>`, run this command to install messenger:
$ composer require symfony/messenger
Messenger centers around two different classes that you'll create: (1) a message class that holds data and (2) a handler(s) class that will be called when that message is dispatched. The handler class will read the message class and perform one or more tasks.
There are no specific requirements for a message class, except that it can be serialized:
// src/Message/SmsNotification.php
namespace App\Message;
class SmsNotification
{
public function __construct(
private string $content,
) {
}
public function getContent(): string
{
return $this->content;
}
}
A message handler is a PHP callable, the recommended way to create it is to
create a class that has the :class:`Symfony\\Component\\Messenger\\Attribute\\AsMessageHandler`
attribute and has an __invoke() method that's type-hinted with the
message class (or a message interface):
// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;
use App\Message\SmsNotification;
use Symfony\Component\Messenger\Attribute\AsMessageHandler;
#[AsMessageHandler]
class SmsNotificationHandler
{
public function __invoke(SmsNotification $message)
{
// ... do some work - like sending an SMS message!
}
}
Tip
You can also use the #[AsMessageHandler] attribute on individual class
methods. You may use the attribute on as many methods in a single class as you
like, allowing you to group the handling of multiple related types of messages.
Thanks to :ref:`autoconfiguration <services-autoconfigure>` and the SmsNotification
type-hint, Symfony knows that this handler should be called when an SmsNotification
message is dispatched. Most of the time, this is all you need to do. But you can
also :ref:`manually configure message handlers <messenger-handler-config>`. To
see all the configured handlers, run:
$ php bin/console debug:messenger
You're ready! To dispatch the message (and call the handler), inject the
messenger.default_bus service (via the MessageBusInterface), like in a controller:
// src/Controller/DefaultController.php
namespace App\Controller;
use App\Message\SmsNotification;
use Symfony\Bundle\FrameworkBundle\Controller\AbstractController;
use Symfony\Component\HttpFoundation\Response;
use Symfony\Component\Messenger\MessageBusInterface;
class DefaultController extends AbstractController
{
public function index(MessageBusInterface $bus): Response
{
// will cause the SmsNotificationHandler to be called
$bus->dispatch(new SmsNotification('Look! I created a message!'));
// ...
}
}
By default, messages are handled as soon as they are dispatched. If you want to handle a message asynchronously, you can configure a transport. A transport is capable of sending messages (e.g. to a queueing system) and then :ref:`receiving them via a worker <messenger-worker>`. Messenger supports :ref:`multiple transports <messenger-transports-config>`.
Note
If you want to use a transport that's not supported, check out the Enqueue's transport, which backs services like Kafka and Google Pub/Sub.
A transport is registered using a "DSN". Thanks to Messenger's Flex recipe, your
.env file already has a few examples.
# MESSENGER_TRANSPORT_DSN=amqp://guest:guest@localhost:5672/%2f/messages
# MESSENGER_TRANSPORT_DSN=doctrine://default
# MESSENGER_TRANSPORT_DSN=redis://localhost:6379/messagesUncomment whichever transport you want (or set it in .env.local). See
:ref:`messenger-transports-config` for more details.
Next, in config/packages/messenger.yaml, let's define a transport called async
that uses this configuration:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
async: "%env(MESSENGER_TRANSPORT_DSN)%"
# or expanded to configure more options
#async:
# dsn: "%env(MESSENGER_TRANSPORT_DSN)%"
# options: []
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="async">%env(MESSENGER_TRANSPORT_DSN)%</framework:transport>
<!-- or expanded to configure more options -->
<framework:transport name="async"
dsn="%env(MESSENGER_TRANSPORT_DSN)%"
>
<option key="...">...</option>
</framework:transport>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$framework->messenger()
->transport('async')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
;
$framework->messenger()
->transport('async')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
->options([])
;
};
Now that you have a transport configured, instead of handling a message immediately, you can configure them to be sent to a transport:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
async: "%env(MESSENGER_TRANSPORT_DSN)%"
routing:
# async is whatever name you gave your transport above
'App\Message\SmsNotification': async
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:routing message-class="App\Message\SmsNotification">
<!-- async is whatever name you gave your transport above -->
<framework:sender service="async"/>
</framework:routing>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$framework->messenger()
// async is whatever name you gave your transport above
->routing('App\Message\SmsNotification')->senders(['async'])
;
};
Thanks to this, the App\Message\SmsNotification will be sent to the async
transport and its handler(s) will not be called immediately. Any messages not
matched under routing will still be handled immediately, i.e. synchronously.
Note
You may use a partial PHP namespace like 'App\Message\*' to match all
the messages within the matching namespace. The only requirement is that the
'*' wildcard has to be placed at the end of the namespace.
You may use '*' as the message class. This will act as a default routing
rule for any message not matched under routing. This is useful to ensure
no message is handled synchronously by default.
The only drawback is that '*' will also apply to the emails sent with the
Symfony Mailer (which uses SendEmailMessage when Messenger is available).
This could cause issues if your emails are not serializable (e.g. if they include
file attachments as PHP resources/streams).
You can also route classes by their parent class or interface. Or send messages to multiple transports:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
routing:
# route all messages that extend this example base class or interface
'App\Message\AbstractAsyncMessage': async
'App\Message\AsyncMessageInterface': async
'My\Message\ToBeSentToTwoSenders': [async, audit]
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<!-- route all messages that extend this example base class or interface -->
<framework:routing message-class="App\Message\AbstractAsyncMessage">
<framework:sender service="async"/>
</framework:routing>
<framework:routing message-class="App\Message\AsyncMessageInterface">
<framework:sender service="async"/>
</framework:routing>
<framework:routing message-class="My\Message\ToBeSentToTwoSenders">
<framework:sender service="async"/>
<framework:sender service="audit"/>
</framework:routing>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
// route all messages that extend this example base class or interface
$messenger->routing('App\Message\AbstractAsyncMessage')->senders(['async']);
$messenger->routing('App\Message\AsyncMessageInterface')->senders(['async']);
$messenger->routing('My\Message\ToBeSentToTwoSenders')->senders(['async', 'audit']);
};
Note
If you configure routing for both a child and parent class, both rules
are used. E.g. if you have an SmsNotification object that extends
from Notification, both the routing for Notification and
SmsNotification will be used.
Tip
You can define and override the transport that a message is using at runtime by using the :class:`Symfony\\Component\\Messenger\\Stamp\\TransportNamesStamp` on the envelope of the message. This stamp takes an array of transport name as its only argument. For more information about stamps, see Envelopes & Stamps.
If you need to pass a Doctrine entity in a message, it's better to pass the entity's
primary key (or whatever relevant information the handler actually needs, like email,
etc.) instead of the object (otherwise you might see errors related to the Entity Manager):
// src/Message/NewUserWelcomeEmail.php
namespace App\Message;
class NewUserWelcomeEmail
{
public function __construct(
private int $userId,
) {
}
public function getUserId(): int
{
return $this->userId;
}
}
Then, in your handler, you can query for a fresh object:
// src/MessageHandler/NewUserWelcomeEmailHandler.php
namespace App\MessageHandler;
use App\Message\NewUserWelcomeEmail;
use App\Repository\UserRepository;
use Symfony\Component\Messenger\Attribute\AsMessageHandler;
#[AsMessageHandler]
class NewUserWelcomeEmailHandler
{
public function __construct(
private UserRepository $userRepository,
) {
}
public function __invoke(NewUserWelcomeEmail $welcomeEmail): void
{
$user = $this->userRepository->find($welcomeEmail->getUserId());
// ... send an email!
}
}
This guarantees the entity contains fresh data.
If a message doesn't :ref:`match any routing rules <messenger-routing>`, it won't
be sent to any transport and will be handled immediately. In some cases (like
when binding handlers to different transports),
it's easier or more flexible to handle this explicitly: by creating a sync
transport and "sending" messages there to be handled immediately:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
# ... other transports
sync: 'sync://'
routing:
App\Message\SmsNotification: sync
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<!-- ... other transports -->
<framework:transport name="sync" dsn="sync://"/>
<framework:routing message-class="App\Message\SmsNotification">
<framework:sender service="sync"/>
</framework:routing>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
// ... other transports
$messenger->transport('sync')->dsn('sync://');
$messenger->routing('App\Message\SmsNotification')->senders(['sync']);
};
You can also create your own transport if you need to send or receive messages from something that is not supported. See :doc:`/messenger/custom-transport`.
Once your messages have been routed, in most cases, you'll need to "consume" them.
You can do this with the messenger:consume command:
$ php bin/console messenger:consume async
# use -vv to see details about what's happening
$ php bin/console messenger:consume async -vv
The first argument is the receiver's name (or service id if you routed to a custom service). By default, the command will run forever: looking for new messages on your transport and handling them. This command is called your "worker".
If you want to consume messages from all available receivers, you can use the
command with the --all option:
$ php bin/console messenger:consume --all
.. versionadded:: 7.1
The ``--all`` option was introduced in Symfony 7.1.
Tip
In a development environment and if you're using the Symfony CLI tool, you can configure workers to be automatically run along with the webserver. You can find more information in the :ref:`Symfony CLI Workers <symfony-server_configuring-workers>` documentation.
Tip
To properly stop a worker, throw an instance of :class:`Symfony\\Component\\Messenger\\Exception\\StopWorkerException`.
On production, there are a few important things to think about:
- Use a Process Manager like Supervisor or systemd to keep your worker(s) running
- You'll want one or more "workers" running at all times. To do that, use a process control system like :ref:`Supervisor <messenger-supervisor>` or :ref:`systemd <messenger-systemd>`.
- Don't Let Workers Run Forever
- Some services (like Doctrine's
EntityManager) will consume more memory over time. So, instead of allowing your worker to run forever, use a flag likemessenger:consume --limit=10to tell your worker to only handle 10 messages before exiting (then the process manager will create a new process). There are also other options like--memory-limit=128Mand--time-limit=3600. - Stopping Workers That Encounter Errors
- If a worker dependency like your database server is down, or timeout is reached,
you can try to add :ref:`reconnect logic <middleware-doctrine>`, or just quit
the worker if it receives too many errors with the
--failure-limitoption of themessenger:consumecommand. - Restart Workers on Deploy
- Each time you deploy, you'll need to restart all your worker processes so
that they see the newly deployed code. To do this, run
messenger:stop-workerson deployment. This will signal to each worker that it should finish the message it's currently handling and should shut down gracefully. Then, the process manager will create new worker processes. The command uses the :ref:`app <cache-configuration-with-frameworkbundle>` cache internally - so make sure this is configured to use an adapter you like. - Use the Same Cache Between Deploys
- If your deploy strategy involves the creation of new target directories, you
should set a value for the :ref:`cache.prefix_seed <reference-cache-prefix-seed>`
configuration option in order to use the same cache namespace between deployments.
Otherwise, the
cache.apppool will use the value of thekernel.project_dirparameter as base for the namespace, which will lead to different namespaces each time a new deployment is made.
Sometimes certain types of messages should have a higher priority and be handled before others. To make this possible, you can create multiple transports and route different messages to them. For example:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
async_priority_high:
dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
options:
# queue_name is specific to the doctrine transport
queue_name: high
# for AMQP send to a separate exchange then queue
#exchange:
# name: high
#queues:
# messages_high: ~
# for redis try "group"
async_priority_low:
dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
options:
queue_name: low
routing:
'App\Message\SmsNotification': async_priority_low
'App\Message\NewUserWelcomeEmail': async_priority_high
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="async_priority_high" dsn="%env(MESSENGER_TRANSPORT_DSN)%">
<framework:options>
<framework:queue>
<framework:name>Queue</framework:name>
</framework:queue>
</framework:options>
</framework:transport>
<framework:transport name="async_priority_low" dsn="%env(MESSENGER_TRANSPORT_DSN)%">
<option key="queue_name">low</option>
</framework:transport>
<framework:routing message-class="App\Message\SmsNotification">
<framework:sender service="async_priority_low"/>
</framework:routing>
<framework:routing message-class="App\Message\NewUserWelcomeEmail">
<framework:sender service="async_priority_high"/>
</framework:routing>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->transport('async_priority_high')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
->options(['queue_name' => 'high']);
$messenger->transport('async_priority_low')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
->options(['queue_name' => 'low']);
$messenger->routing('App\Message\SmsNotification')->senders(['async_priority_low']);
$messenger->routing('App\Message\NewUserWelcomeEmail')->senders(['async_priority_high']);
};
You can then run individual workers for each transport or instruct one worker to handle messages in a priority order:
$ php bin/console messenger:consume async_priority_high async_priority_low
The worker will always first look for messages waiting on async_priority_high. If
there are none, then it will consume messages from async_priority_low.
Some transports (notably AMQP) have the concept of exchanges and queues. A Symfony transport is always bound to an exchange. By default, the worker consumes from all queues attached to the exchange of the specified transport. However, there are use cases to want a worker to only consume from specific queues.
You can limit the worker to only process messages from specific queue(s):
$ php bin/console messenger:consume my_transport --queues=fasttrack
# you can pass the --queues option more than once to process multiple queues
$ php bin/console messenger:consume my_transport --queues=fasttrack1 --queues=fasttrack2
Note
To allow using the queues option, the receiver must implement the
:class:`Symfony\\Component\\Messenger\\Transport\\Receiver\\QueueReceiverInterface`.
Run the messenger:stats command to know how many messages are in the "queues"
of some or all transports:
# displays the number of queued messages in all transports
$ php bin/console messenger:stats
# shows stats only for some transports
$ php bin/console messenger:stats my_transport_name other_transport_name
Note
In order for this command to work, the configured transport's receiver must implement :class:`Symfony\\Component\\Messenger\\Transport\\Receiver\\MessageCountAwareInterface`.
Supervisor is a great tool to guarantee that your worker process(es) is
always running (even if it closes due to failure, hitting a message limit
or thanks to messenger:stop-workers). You can install it on Ubuntu, for
example, via:
$ sudo apt-get install supervisor
Supervisor configuration files typically live in a /etc/supervisor/conf.d
directory. For example, you can create a new messenger-worker.conf file
there to make sure that 2 instances of messenger:consume are running at all
times:
;/etc/supervisor/conf.d/messenger-worker.conf
[program:messenger-consume]
command=php /path/to/your/app/bin/console messenger:consume async --time-limit=3600
user=ubuntu
numprocs=2
startsecs=0
autostart=true
autorestart=true
startretries=10
process_name=%(program_name)s_%(process_num)02dChange the async argument to use the name of your transport (or transports)
and user to the Unix user on your server.
Caution!
During a deployment, something might be unavailable (e.g. the
database) causing the consumer to fail to start. In this situation,
Supervisor will try startretries number of times to restart the
command. Make sure to change this setting to avoid getting the command
in a FATAL state, which will never restart again.
Each restart, Supervisor increases the delay by 1 second. For instance, if
the value is 10, it will wait 1 sec, 2 sec, 3 sec, etc. This gives the
service a total of 55 seconds to become available again. Increase the
startretries setting to cover the maximum expected downtime.
If you use the Redis Transport, note that each worker needs a unique consumer
name to avoid the same message being handled by multiple workers. One way to
achieve this is to set an environment variable in the Supervisor configuration
file, which you can then refer to in messenger.yaml
(see the :ref:`Redis section <messenger-redis-transport>` below):
environment=MESSENGER_CONSUMER_NAME=%(program_name)s_%(process_num)02dNext, tell Supervisor to read your config and start your workers:
$ sudo supervisorctl reread
$ sudo supervisorctl update
$ sudo supervisorctl start messenger-consume:*
# If you deploy an update of your code, don't forget to restart your workers
# to run the new code
$ sudo supervisorctl restart messenger-consume:*
See the Supervisor docs for more details.
If you install the PCNTL PHP extension in your project, workers will handle
the SIGTERM or SIGINT POSIX signals to finish processing their current
message before terminating.
However, you might prefer to use different POSIX signals for graceful shutdown.
You can override default ones by setting the framework.messenger.stop_worker_on_signals
configuration option.
In some cases the SIGTERM signal is sent by Supervisor itself (e.g. stopping
a Docker container having Supervisor as its entrypoint). In these cases you
need to add a stopwaitsecs key to the program configuration (with a value
of the desired grace period in seconds) in order to perform a graceful shutdown:
[program:x]
stopwaitsecs=20While Supervisor is a great tool, it has the disadvantage that you need system access to run it. Systemd has become the standard on most Linux distributions, and has a good alternative called user services.
Systemd user service configuration files typically live in a ~/.config/systemd/user
directory. For example, you can create a new messenger-worker.service file. Or a
[email protected] file if you want more instances running at the same time:
[Unit]
Description=Symfony messenger-consume %i
[Service]
ExecStart=php /path/to/your/app/bin/console messenger:consume async --time-limit=3600
Restart=always
RestartSec=30
[Install]
WantedBy=default.targetNow, tell systemd to enable and start one worker:
$ systemctl --user enable [email protected]
$ systemctl --user start [email protected]
# to enable and start 20 workers
$ systemctl --user enable messenger-worker@{1..20}.service
$ systemctl --user start messenger-worker@{1..20}.service
If you change your service config file, you need to reload the daemon:
$ systemctl --user daemon-reload
To restart all your consumers:
$ systemctl --user restart messenger-consume@*.service
The systemd user instance is only started after the first login of the particular user. Consumer often need to start on system boot instead. Enable lingering on the user to activate that behavior:
$ loginctl enable-linger <your-username>
Logs are managed by journald and can be worked with using the journalctl command:
# follow logs of consumer nr 11
$ journalctl -f --user-unit [email protected]
# follow logs of all consumers
$ journalctl -f --user-unit messenger-consume@*
# follow all logs from your user services
$ journalctl -f _UID=$UID
See the systemd docs for more details.
Note
You either need elevated privileges for the journalctl command, or add
your user to the systemd-journal group:
$ sudo usermod -a -G systemd-journal <your-username>
PHP is designed to be stateless, there are no shared resources across different requests. In HTTP context PHP cleans everything after sending the response, so you can decide to not take care of services that may leak memory.
On the other hand, it's common for workers to process messages sequentially in long-running CLI processes which don't finish after processing a single message. Beware about service states to prevent information and/or memory leakage as Symfony will inject the same instance of a service in all messages, preserving the internal state of the services.
However, certain Symfony services, such as the Monolog
:ref:`fingers crossed handler <logging-handler-fingers_crossed>`, leak by design.
Symfony provides a service reset feature to solve this problem. When resetting
the container automatically between two messages, Symfony looks for any services
implementing :class:`Symfony\\Contracts\\Service\\ResetInterface` (including your
own services) and calls their reset() method so they can clean their internal state.
If a service is not stateless and you want to reset its properties after each message, then
the service must implement :class:`Symfony\\Contracts\\Service\\ResetInterface` where you can reset the
properties in the reset() method.
If you don't want to reset the container, add the --no-reset option when
running the messenger:consume command.
Sometimes you might need to rate limit your message worker. You can configure a
rate limiter on a transport (requires the :doc:`RateLimiter component </rate-limiter>`)
by setting its rate_limiter option:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
async:
rate_limiter: your_rate_limiter_name
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="async">
<option key="rate_limiter">your_rate_limiter_name</option>
</framework:transport>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->messenger()
->transport('async')
->options(['rate_limiter' => 'your_rate_limiter_name'])
;
};
Caution!
When a rate limiter is configured on a transport, it will block the whole worker when the limit is hit. You should make sure you configure a dedicated worker for a rate limited transport to avoid other transports to be blocked.
If an exception is thrown while consuming a message from a transport it will automatically be re-sent to the transport to be tried again. By default, a message will be retried 3 times before being discarded or :ref:`sent to the failure transport <messenger-failure-transport>`. Each retry will also be delayed, in case the failure was due to a temporary issue. All of this is configurable for each transport:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
async_priority_high:
dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
# default configuration
retry_strategy:
max_retries: 3
# milliseconds delay
delay: 1000
# causes the delay to be higher before each retry
# e.g. 1 second delay, 2 seconds, 4 seconds
multiplier: 2
max_delay: 0
# applies randomness to the delay that can prevent the thundering herd effect
# the value (between 0 and 1.0) is the percentage of 'delay' that will be added/subtracted
jitter: 0.1
# override all of this with a service that
# implements Symfony\Component\Messenger\Retry\RetryStrategyInterface
# service: null
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="async_priority_high" dsn="%env(MESSENGER_TRANSPORT_DSN)%?queue_name=high_priority">
<framework:retry-strategy max-retries="3" delay="1000" multiplier="2" max-delay="0" jitter="0.1"/>
</framework:transport>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->transport('async_priority_high')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
// default configuration
->retryStrategy()
->maxRetries(3)
// milliseconds delay
->delay(1000)
// causes the delay to be higher before each retry
// e.g. 1 second delay, 2 seconds, 4 seconds
->multiplier(2)
->maxDelay(0)
// applies randomness to the delay that can prevent the thundering herd effect
// the value (between 0 and 1.0) is the percentage of 'delay' that will be added/subtracted
->jitter(0.1)
// override all of this with a service that
// implements Symfony\Component\Messenger\Retry\RetryStrategyInterface
->service(null)
;
};
.. versionadded:: 7.1
The ``jitter`` option was introduced in Symfony 7.1.
Tip
Symfony triggers a :class:`Symfony\\Component\\Messenger\\Event\\WorkerMessageRetriedEvent` when a message is retried so you can run your own logic.
Note
Thanks to :class:`Symfony\\Component\\Messenger\\Stamp\\SerializedMessageStamp`, the serialized form of the message is saved, which prevents to serialize it again if the message is later retried.
Sometimes handling a message might fail in a way that you know is permanent and should not be retried. If you throw :class:`Symfony\\Component\\Messenger\\Exception\\UnrecoverableMessageHandlingException`, the message will not be retried.
Note
Messages that will not be retried, will still show up in the configured failure transport. If you want to avoid that, consider handling the error yourself and let the handler successfully end.
Sometimes handling a message must fail in a way that you know is temporary
and must be retried. If you throw
:class:`Symfony\\Component\\Messenger\\Exception\\RecoverableMessageHandlingException`,
the message will always be retried infinitely and max_retries setting will be ignored.
If a message fails it is retried multiple times (max_retries) and then will
be discarded. To avoid this happening, you can instead configure a failure_transport:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
# after retrying, messages will be sent to the "failed" transport
failure_transport: failed
transports:
# ... other transports
failed: 'doctrine://default?queue_name=failed'
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<!-- after retrying, messages will be sent to the "failed" transport -->
<framework:messenger failure-transport="failed">
<!-- ... other transports -->
<framework:transport name="failed" dsn="doctrine://default?queue_name=failed"/>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
// after retrying, messages will be sent to the "failed" transport
$messenger->failureTransport('failed');
// ... other transports
$messenger->transport('failed')
->dsn('doctrine://default?queue_name=failed');
};
In this example, if handling a message fails 3 times (default max_retries),
it will then be sent to the failed transport. While you can use
messenger:consume failed to consume this like a normal transport, you'll
usually want to manually view the messages in the failure transport and choose
to retry them:
# see all messages in the failure transport with a default limit of 50
$ php bin/console messenger:failed:show
# see the 10 first messages
$ php bin/console messenger:failed:show --max=10
# see only MyClass messages
$ php bin/console messenger:failed:show --class-filter='MyClass'
# see the number of messages by message class
$ php bin/console messenger:failed:show --stats
# see details about a specific failure
$ php bin/console messenger:failed:show 20 -vv
# view and retry messages one-by-one
$ php bin/console messenger:failed:retry -vv
# retry specific messages
$ php bin/console messenger:failed:retry 20 30 --force
# remove a message without retrying it
$ php bin/console messenger:failed:remove 20
# remove messages without retrying them and show each message before removing it
$ php bin/console messenger:failed:remove 20 30 --show-messages
# remove all messages in the failure transport
$ php bin/console messenger:failed:remove --all
If the message fails again, it will be re-sent back to the failure transport due to the normal :ref:`retry rules <messenger-retries-failures>`. Once the max retry has been hit, the message will be discarded permanently.
Sometimes it is not enough to have a single, global failed transport configured
because some messages are more important than others. In those cases, you can
override the failure transport for only specific transports:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
# after retrying, messages will be sent to the "failed" transport
# by default if no "failed_transport" is configured inside a transport
failure_transport: failed_default
transports:
async_priority_high:
dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
failure_transport: failed_high_priority
# since no failed transport is configured, the one used will be
# the global "failure_transport" set
async_priority_low:
dsn: 'doctrine://default?queue_name=async_priority_low'
failed_default: 'doctrine://default?queue_name=failed_default'
failed_high_priority: 'doctrine://default?queue_name=failed_high_priority'
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<!-- after retrying, messages will be sent to the "failed" transport
by default if no "failed-transport" is configured inside a transport -->
<framework:messenger failure-transport="failed_default">
<framework:transport name="async_priority_high" dsn="%env(MESSENGER_TRANSPORT_DSN)%" failure-transport="failed_high_priority"/>
<!-- since no "failed_transport" is configured, the one used will be
the global "failed_transport" set -->
<framework:transport name="async_priority_low" dsn="doctrine://default?queue_name=async_priority_low"/>
<framework:transport name="failed_default" dsn="doctrine://default?queue_name=failed_default"/>
<framework:transport name="failed_high_priority" dsn="doctrine://default?queue_name=failed_high_priority"/>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
// after retrying, messages will be sent to the "failed" transport
// by default if no "failure_transport" is configured inside a transport
$messenger->failureTransport('failed_default');
$messenger->transport('async_priority_high')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
->failureTransport('failed_high_priority');
// since no failed transport is configured, the one used will be
// the global failure_transport set
$messenger->transport('async_priority_low')
->dsn('doctrine://default?queue_name=async_priority_low');
$messenger->transport('failed_default')
->dsn('doctrine://default?queue_name=failed_default');
$messenger->transport('failed_high_priority')
->dsn('doctrine://default?queue_name=failed_high_priority');
};
If there is no failure_transport defined globally or on the transport level,
the messages will be discarded after the number of retries.
The failed commands have an optional option --transport to specify
the failure_transport configured at the transport level.
# see all messages in "failure_transport" transport
$ php bin/console messenger:failed:show --transport=failure_transport
# retry specific messages from "failure_transport"
$ php bin/console messenger:failed:retry 20 30 --transport=failure_transport --force
# remove a message without retrying it from "failure_transport"
$ php bin/console messenger:failed:remove 20 --transport=failure_transport
Messenger supports a number of different transport types, each with their own options. Options can be passed to the transport via a DSN string or configuration.
# .env
MESSENGER_TRANSPORT_DSN=amqp://localhost/%2f/messages?auto_setup=false.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
my_transport:
dsn: "%env(MESSENGER_TRANSPORT_DSN)%"
options:
auto_setup: false
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="my_transport" dsn="%env(MESSENGER_TRANSPORT_DSN)%">
<framework:options auto-setup="false"/>
</framework:transport>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->transport('my_transport')
->dsn(env('MESSENGER_TRANSPORT_DSN'))
->options(['auto_setup' => false]);
};
Options defined under options take precedence over ones defined in the DSN.
The AMQP transport uses the AMQP PHP extension to send messages to queues like RabbitMQ. Install it by running:
$ composer require symfony/amqp-messenger
The AMQP transport DSN may looks like this:
# .env
MESSENGER_TRANSPORT_DSN=amqp://guest:guest@localhost:5672/%2f/messages
# or use the AMQPS protocol
MESSENGER_TRANSPORT_DSN=amqps://guest:guest@localhost/%2f/messagesIf you want to use TLS/SSL encrypted AMQP, you must also provide a CA certificate.
Define the certificate path in the amqp.cacert PHP.ini setting
(e.g. amqp.cacert = /etc/ssl/certs) or in the cacert parameter of the
DSN (e.g amqps://localhost?cacert=/etc/ssl/certs/).
The default port used by TLS/SSL encrypted AMQP is 5671, but you can overwrite
it in the port parameter of the DSN (e.g. amqps://localhost?cacert=/etc/ssl/certs/&port=12345).
Note
By default, the transport will automatically create any exchanges, queues and
binding keys that are needed. That can be disabled, but some functionality
may not work correctly (like delayed queues).
To not autocreate any queues, you can configure a transport with queues: [].
Note
You can limit the consumer of an AMQP transport to only process messages from some queues of an exchange. See :ref:`messenger-limit-queues`.
The transport has a number of other options, including ways to configure the exchange, queues binding keys and more. See the documentation on :class:`Symfony\\Component\\Messenger\\Bridge\\Amqp\\Transport\\Connection`.
The transport has a number of options:
auto_setup(default:true)- Whether the exchanges and queues should be created automatically during send / get.
cacert- Path to the CA cert file in PEM format.
cert- Path to the client certificate in PEM format.
channel_max- Specifies highest channel number that the server permits. 0 means standard extension limit
confirm_timeout- Timeout in seconds for confirmation; if none specified, transport will not wait for message confirmation. Note: 0 or greater seconds. May be fractional.
connect_timeout- Connection timeout. Note: 0 or greater seconds. May be fractional.
frame_max- The largest frame size that the server proposes for the connection, including frame header and end-byte. 0 means standard extension limit (depends on librabbimq default frame size limit)
heartbeat- The delay, in seconds, of the connection heartbeat that the server wants. 0 means the server does not want a heartbeat. Note, librabbitmq has limited heartbeat support, which means heartbeats checked only during blocking calls.
host- Hostname of the AMQP service
key- Path to the client key in PEM format.
login- Username to use to connect the AMQP service
password- Password to use to connect to the AMQP service
persistent(default:'false')- Whether the connection is persistent
port- Port of the AMQP service
read_timeout- Timeout in for income activity. Note: 0 or greater seconds. May be fractional.
retry- (no description available)
sasl_method
connection_name- For custom connection names (requires at least version 1.10 of the PHP AMQP extension)
verify- Enable or disable peer verification. If peer verification is enabled then the common name in the server certificate must match the server name. Peer verification is enabled by default.
vhost- Virtual Host to use with the AMQP service
write_timeout- Timeout in for outcome activity. Note: 0 or greater seconds. May be fractional.
delay[queue_name_pattern](default:delay_%exchange_name%_%routing_key%_%delay%)- Pattern to use to create the queues
delay[exchange_name](default:delays)- Name of the exchange to be used for the delayed/retried messages
queues[name][arguments]- Extra arguments
queues[name][binding_arguments]- Arguments to be used while binding the queue.
queues[name][binding_keys]- The binding keys (if any) to bind to this queue
queues[name][flags](default:AMQP_DURABLE)- Queue flags
exchange[arguments]- Extra arguments for the exchange (e.g.
alternate-exchange) exchange[default_publish_routing_key]- Routing key to use when publishing, if none is specified on the message
exchange[flags](default:AMQP_DURABLE)- Exchange flags
exchange[name]- Name of the exchange
exchange[type](default:fanout)- Type of exchange
You can also configure AMQP-specific settings on your message by adding :class:`Symfony\\Component\\Messenger\\Bridge\\Amqp\\Transport\\AmqpStamp` to your Envelope:
use Symfony\Component\Messenger\Bridge\Amqp\Transport\AmqpStamp;
// ...
$attributes = [];
$bus->dispatch(new SmsNotification(), [
new AmqpStamp('custom-routing-key', AMQP_NOPARAM, $attributes),
]);
Caution!
The consumers do not show up in an admin panel as this transport does not rely on
\AmqpQueue::consume() which is blocking. Having a blocking receiver makes
the --time-limit/--memory-limit options of the messenger:consume command as well as
the messenger:stop-workers command inefficient, as they all rely on the fact that
the receiver returns immediately no matter if it finds a message or not. The consume
worker is responsible for iterating until it receives a message to handle and/or until one
of the stop conditions is reached. Thus, the worker's stop logic cannot be reached if it
is stuck in a blocking call.
Tip
If your application faces socket exceptions or high connection churn (shown by the rapid creation and deletion of connections), consider using AMQProxy. This tool works as a gateway between Symfony Messenger and AMQP server, maintaining stable connections and minimizing overheads (which also improves the overall performance).
The Doctrine transport can be used to store messages in a database table. Install it by running:
$ composer require symfony/doctrine-messenger
The Doctrine transport DSN may looks like this:
# .env
MESSENGER_TRANSPORT_DSN=doctrine://defaultThe format is doctrine://<connection_name>, in case you have multiple connections
and want to use one other than the "default". The transport will automatically create
a table named messenger_messages.
If you want to change the default table name, pass a custom table name in the
DSN by using the table_name option:
# .env
MESSENGER_TRANSPORT_DSN=doctrine://default?table_name=your_custom_table_nameOr, to create the table yourself, set the auto_setup option to false and
:ref:`generate a migration <doctrine-creating-the-database-tables-schema>`.
Caution!
The datetime property of the messages stored in the database uses the timezone of the current system. This may cause issues if multiple machines with different timezone configuration use the same storage.
The transport has a number of options:
table_name(default:messenger_messages)- Name of the table
queue_name(default:default)- Name of the queue (a column in the table, to use one table for multiple transports)
redeliver_timeout(default:3600)Timeout before retrying a message that's in the queue but in the "handling" state (if a worker stopped for some reason, this will occur, eventually you should retry the message) - in seconds.
Note
Set
redeliver_timeoutto a greater value than your slowest message duration. Otherwise, some messages will start a second time while the first one is still being handled.auto_setup- Whether the table should be created automatically during send / get.
When using PostgreSQL, you have access to the following options to leverage the LISTEN/NOTIFY feature. This allow for a more performant approach than the default polling behavior of the Doctrine transport because PostgreSQL will directly notify the workers when a new message is inserted in the table.
use_notify(default:true)- Whether to use LISTEN/NOTIFY.
check_delayed_interval(default:60000)- The interval to check for delayed messages, in milliseconds. Set to 0 to disable checks.
get_notify_timeout(default:0)- The length of time to wait for a response when calling
PDO::pgsqlGetNotify, in milliseconds.
The Beanstalkd transport sends messages directly to a Beanstalkd work queue. Install it by running:
$ composer require symfony/beanstalkd-messenger
The Beanstalkd transport DSN may looks like this:
# .env
MESSENGER_TRANSPORT_DSN=beanstalkd://localhost:11300?tube_name=foo&timeout=4&ttr=120
# If no port, it will default to 11300
MESSENGER_TRANSPORT_DSN=beanstalkd://localhostThe transport has a number of options:
tube_name(default:default)- Name of the queue
timeout(default:0)- Message reservation timeout - in seconds. 0 will cause the server to immediately return either a response or a TransportException will be thrown.
ttr(default:90)- The message time to run before it is put back in the ready queue - in seconds.
The Redis transport uses streams to queue messages. This transport requires the Redis PHP extension (>=4.3) and a running Redis server (^5.0). Install it by running:
$ composer require symfony/redis-messenger
The Redis transport DSN may looks like this:
# .env
MESSENGER_TRANSPORT_DSN=redis://localhost:6379/messages
# Full DSN Example
MESSENGER_TRANSPORT_DSN=redis://password@localhost:6379/messages/symfony/consumer?auto_setup=true&serializer=1&stream_max_entries=0&dbindex=0
# Redis Cluster Example
MESSENGER_TRANSPORT_DSN=redis://host-01:6379,redis://host-02:6379,redis://host-03:6379,redis://host-04:6379
# Unix Socket Example
MESSENGER_TRANSPORT_DSN=redis:///var/run/redis.sock
# TLS Example
MESSENGER_TRANSPORT_DSN=rediss://localhost:6379/messages
# Multiple Redis Sentinel Hosts Example
MESSENGER_TRANSPORT_DSN=redis:?host[redis1:26379]&host[redis2:26379]&host[redis3:26379]&sentinel_master=dbA number of options can be configured via the DSN or via the options key
under the transport in messenger.yaml:
stream(default:messages)- The Redis stream name
group(default:symfony)- The Redis consumer group name
consumer(default:consumer)- Consumer name used in Redis
auto_setup(default:true)- Whether to create the Redis group automatically
auth- The Redis password
delete_after_ack(default:true)- If
true, messages are deleted automatically after processing them delete_after_reject(default:true)- If
true, messages are deleted automatically if they are rejected lazy(default:false)- Connect only when a connection is really needed
serializer(default:Redis::SERIALIZER_PHP)- How to serialize the final payload in Redis (the
Redis::OPT_SERIALIZERoption) stream_max_entries(default:0)- The maximum number of entries which the stream will be trimmed to. Set it to a large enough number to avoid losing pending messages
redeliver_timeout(default:3600)- Timeout (in seconds) before retrying a pending message which is owned by an abandoned consumer (if a worker died for some reason, this will occur, eventually you should retry the message).
claim_interval(default:60000)- Interval on which pending/abandoned messages should be checked for to claim - in milliseconds
persistent_id(default:null)- String, if null connection is non-persistent.
retry_interval(default:0)- Int, value in milliseconds
read_timeout(default:0)- Float, value in seconds default indicates unlimited
timeout(default:0)- Connection timeout. Float, value in seconds default indicates unlimited
sentinel_master(default:null)- String, if null or empty Sentinel support is disabled
redis_sentinel(default:null)An alias of the
sentinel_masteroption.. versionadded:: 7.1 The ``redis_sentinel`` option was introduced in Symfony 7.1.ssl(default:null)Map of SSL context options for the TLS channel. This is useful for example to change the requirements for the TLS channel in tests:
# config/packages/test/messenger.yaml framework: messenger: transports: redis: dsn: "rediss://localhost" options: ssl: allow_self_signed: true capture_peer_cert: true capture_peer_cert_chain: true disable_compression: true SNI_enabled: true verify_peer: true verify_peer_name: true
Caution!
There should never be more than one messenger:consume command running with the same
combination of stream, group and consumer, or messages could end up being
handled more than once. If you run multiple queue workers, consumer can be set to an
environment variable, like %env(MESSENGER_CONSUMER_NAME)%, set by Supervisor
(example below) or any other service used to manage the worker processes.
In a container environment, the HOSTNAME can be used as the consumer name, since
there is only one worker per container/host. If using Kubernetes to orchestrate the
containers, consider using a StatefulSet to have stable names.
Tip
Set delete_after_ack to true (if you use a single group) or define
stream_max_entries (if you can estimate how many max entries is acceptable
in your case) to avoid memory leaks. Otherwise, all messages will remain
forever in Redis.
The in-memory transport does not actually deliver messages. Instead, it
holds them in memory during the request, which can be useful for testing.
For example, if you have an async_priority_normal transport, you could
override it in the test environment to use this transport:
.. configuration-block::
.. code-block:: yaml
# config/packages/test/messenger.yaml
framework:
messenger:
transports:
async_priority_normal: 'in-memory://'
.. code-block:: xml
<!-- config/packages/test/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="async_priority_normal" dsn="in-memory://"/>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/test/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->transport('async_priority_normal')
->dsn('in-memory://');
};
Then, while testing, messages will not be delivered to the real transport. Even better, in a test, you can check that exactly one message was sent during a request:
// tests/Controller/DefaultControllerTest.php
namespace App\Tests\Controller;
use Symfony\Bundle\FrameworkBundle\Test\WebTestCase;
use Symfony\Component\Messenger\Transport\InMemory\InMemoryTransport;
class DefaultControllerTest extends WebTestCase
{
public function testSomething(): void
{
$client = static::createClient();
// ...
$this->assertSame(200, $client->getResponse()->getStatusCode());
/** @var InMemoryTransport $transport */
$transport = $this->getContainer()->get('messenger.transport.async_priority_normal');
$this->assertCount(1, $transport->getSent());
}
}
The transport has a number of options:
serialize(boolean, default:false)- Whether to serialize messages or not. This is useful to test an additional layer, especially when you use your own message serializer.
Note
All in-memory transports will be reset automatically after each test in
test classes extending
:class:`Symfony\\Bundle\\FrameworkBundle\\Test\\KernelTestCase`
or :class:`Symfony\\Bundle\\FrameworkBundle\\Test\\WebTestCase`.
The Amazon SQS transport is perfect for applications hosted on AWS. Install it by running:
$ composer require symfony/amazon-sqs-messenger
The SQS transport DSN may looks like this:
# .env
MESSENGER_TRANSPORT_DSN=https://sqs.eu-west-3.amazonaws.com/123456789012/messages?access_key=AKIAIOSFODNN7EXAMPLE&secret_key=j17M97ffSVoKI0briFoo9a
MESSENGER_TRANSPORT_DSN=sqs://localhost:9494/messages?sslmode=disableNote
The transport will automatically create queues that are needed. This
can be disabled by setting the auto_setup option to false.
Tip
Before sending or receiving a message, Symfony needs to convert the queue
name into an AWS queue URL by calling the GetQueueUrl API in AWS. This
extra API call can be avoided by providing a DSN which is the queue URL.
The transport has a number of options:
access_key- AWS access key (must be urlencoded)
account(default: The owner of the credentials)- Identifier of the AWS account
auto_setup(default:true)- Whether the queue should be created automatically during send / get.
buffer_size(default:9)- Number of messages to prefetch
debug(default:false)- If
trueit logs all HTTP requests and responses (it impacts performance) endpoint(default:https://sqs.eu-west-1.amazonaws.com)- Absolute URL to the SQS service
poll_timeout(default:0.1)- Wait for new message duration in seconds
queue_name(default:messages)- Name of the queue
region(default:eu-west-1)- Name of the AWS region
secret_key- AWS secret key (must be urlencoded)
session_token- AWS session token
visibility_timeout(default: Queue's configuration)- Amount of seconds the message will not be visible (Visibility Timeout)
wait_time(default:20)- Long polling duration in seconds
Note
The wait_time parameter defines the maximum duration Amazon SQS should
wait until a message is available in a queue before sending a response.
It helps reducing the cost of using Amazon SQS by eliminating the number
of empty responses.
The poll_timeout parameter defines the duration the receiver should wait
before returning null. It avoids blocking other receivers from being called.
Note
If the queue name is suffixed by .fifo, AWS will create a FIFO queue.
Use the stamp :class:`Symfony\\Component\\Messenger\\Bridge\\AmazonSqs\\Transport\\AmazonSqsFifoStamp`
to define the Message group ID and the Message deduplication ID.
Another possibility is to enable the
:class:`Symfony\\Component\\Messenger\\Bridge\\AmazonSqs\\Middleware\\AddFifoStampMiddleware`.
If your message implements
:class:`Symfony\\Component\\Messenger\\Bridge\\AmazonSqs\\MessageDeduplicationAwareInterface`,
the middleware will automatically add the
:class:`Symfony\\Component\\Messenger\\Bridge\\AmazonSqs\\Transport\\AmazonSqsFifoStamp`
and set the Message deduplication ID. Additionally, if your message implements the
:class:`Symfony\\Component\\Messenger\\Bridge\\AmazonSqs\\MessageGroupAwareInterface`,
the middleware will automatically set the Message group ID of the stamp.
You can learn more about middlewares in :ref:`the dedicated section <messenger_middleware>`.
FIFO queues don't support setting a delay per message, a value of delay: 0
is required in the retry strategy settings.
When messages are sent to (and received from) a transport, they're serialized
using PHP's native serialize() & unserialize() functions. You can change
this globally (or for each transport) to a service that implements
:class:`Symfony\\Component\\Messenger\\Transport\\Serialization\\SerializerInterface`:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
serializer:
default_serializer: messenger.transport.symfony_serializer
symfony_serializer:
format: json
context: { }
transports:
async_priority_normal:
dsn: # ...
serializer: messenger.transport.symfony_serializer
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:serializer default-serializer="messenger.transport.symfony_serializer">
<framework:symfony-serializer format="json">
<framework:context/>
</framework:symfony-serializer>
</framework:serializer>
<framework:transport name="async_priority_normal" dsn="..." serializer="messenger.transport.symfony_serializer"/>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->serializer()
->defaultSerializer('messenger.transport.symfony_serializer')
->symfonySerializer()
->format('json')
->context('foo', 'bar');
$messenger->transport('async_priority_normal')
->dsn('...')
->serializer('messenger.transport.symfony_serializer');
};
The messenger.transport.symfony_serializer is a built-in service that uses
the :doc:`Serializer component </serializer>` and can be configured in a few ways.
If you do choose to use the Symfony serializer, you can control the context
on a case-by-case basis via the :class:`Symfony\\Component\\Messenger\\Stamp\\SerializerStamp`
(see Envelopes & Stamps).
Tip
When sending/receiving messages to/from another application, you may need more control over the serialization process. Using a custom serializer provides that control. See SymfonyCasts' message serializer tutorial for details.
It is possible to trigger any command by dispatching a :class:`Symfony\\Component\\Console\\Messenger\\RunCommandMessage`. Symfony will take care of handling this message and execute the command passed to the message parameter:
use Symfony\Component\Console\Messenger\RunCommandMessage;
use Symfony\Component\Messenger\MessageBusInterface;
class CleanUpService
{
public function __construct(private readonly MessageBusInterface $bus)
{
}
public function cleanUp(): void
{
// Long task with some caching...
// Once finished, dispatch some clean up commands
$this->bus->dispatch(new RunCommandMessage('app:my-cache:clean-up --dir=var/temp'));
$this->bus->dispatch(new RunCommandMessage('cache:clear'));
}
}
You can configure the behavior in the case of something going wrong during command
execution. To do so, you can use the throwOnFailure and catchExceptions
parameters when creating your instance of
:class:`Symfony\\Component\\Console\\Messenger\\RunCommandMessage`.
Once handled, the handler will return a :class:`Symfony\\Component\\Console\\Messenger\\RunCommandContext` which contains many useful information such as the exit code or the output of the process. You can refer to the page dedicated on :ref:`handler results <messenger-getting-handler-results>` for more information.
Messenger comes with a handy helper to run external processes by dispatching a message. This takes advantages of the :doc:`Process component </components/process>`. By dispatching a :class:`Symfony\\Component\\Process\\Messenger\\RunProcessMessage`, Messenger will take care of creating a new process with the parameters you passed:
use Symfony\Component\Messenger\MessageBusInterface;
use Symfony\Component\Process\Messenger\RunProcessMessage;
class CleanUpService
{
public function __construct(private readonly MessageBusInterface $bus)
{
}
public function cleanUp(): void
{
$this->bus->dispatch(new RunProcessMessage(['rm', '-rf', 'var/log/temp/*'], cwd: '/my/custom/working-dir'));
// ...
}
}
Once handled, the handler will return a :class:`Symfony\\Component\\Process\\Messenger\\RunProcessContext` which contains many useful information such as the exit code or the output of the process. You can refer to the page dedicated on :ref:`handler results <messenger-getting-handler-results>` for more information.
Sometimes, you may need to regularly ping a webservice to get its status, e.g. is it up or down. It is possible to do so by dispatching a :class:`Symfony\\Component\\HttpClient\\Messenger\\PingWebhookMessage`:
use Symfony\Component\HttpClient\Messenger\PingWebhookMessage;
use Symfony\Component\Messenger\MessageBusInterface;
class LivenessService
{
public function __construct(private readonly MessageBusInterface $bus)
{
}
public function ping(): void
{
// An HttpExceptionInterface is thrown on 3xx/4xx/5xx
$this->bus->dispatch(new PingWebhookMessage('GET', 'https://example.com/status'));
// Ping, but does not throw on 3xx/4xx/5xx
$this->bus->dispatch(new PingWebhookMessage('GET', 'https://example.com/status', throw: false));
// Any valid HttpClientInterface option can be used
$this->bus->dispatch(new PingWebhookMessage('POST', 'https://example.com/status', [
'headers' => [
'Authorization' => 'Bearer ...'
],
'json' => [
'data' => 'some-data',
],
]));
}
}
The handler will return a :class:`Symfony\\Contracts\\HttpClient\\ResponseInterface`, allowing you to gather and process information returned by the HTTP request.
When a message is handled, the :class:`Symfony\\Component\\Messenger\\Middleware\\HandleMessageMiddleware` adds a :class:`Symfony\\Component\\Messenger\\Stamp\\HandledStamp` for each object that handled the message. You can use this to get the value returned by the handler(s):
use Symfony\Component\Messenger\MessageBusInterface; use Symfony\Component\Messenger\Stamp\HandledStamp; $envelope = $messageBus->dispatch(new SomeMessage()); // get the value that was returned by the last message handler $handledStamp = $envelope->last(HandledStamp::class); $handledStamp->getResult(); // or get info about all of handlers $handledStamps = $envelope->all(HandledStamp::class);
The Messenger component can be used in CQRS architectures where command & query buses are central pieces of the application. Read Martin Fowler's article about CQRS to learn more and :ref:`how to configure multiple buses <messenger-multiple-buses>`.
As queries are usually synchronous and expected to be handled once, getting the result from the handler is a common need.
A :class:`Symfony\\Component\\Messenger\\HandleTrait` exists to get the result
of the handler when processing synchronously. It also ensures that exactly one
handler is registered. The HandleTrait can be used in any class that has a
$messageBus property:
// src/Action/ListItems.php
namespace App\Action;
use App\Message\ListItemsQuery;
use App\MessageHandler\ListItemsQueryResult;
use Symfony\Component\Messenger\HandleTrait;
use Symfony\Component\Messenger\MessageBusInterface;
class ListItems
{
use HandleTrait;
public function __construct(
private MessageBusInterface $messageBus,
) {
}
public function __invoke(): void
{
$result = $this->query(new ListItemsQuery(/* ... */));
// Do something with the result
// ...
}
// Creating such a method is optional, but allows type-hinting the result
private function query(ListItemsQuery $query): ListItemsQueryResult
{
return $this->handle($query);
}
}
Hence, you can use the trait to create command & query bus classes.
For example, you could create a special QueryBus class and inject it
wherever you need a query bus behavior instead of the MessageBusInterface:
// src/MessageBus/QueryBus.php
namespace App\MessageBus;
use Symfony\Component\Messenger\Envelope;
use Symfony\Component\Messenger\HandleTrait;
use Symfony\Component\Messenger\MessageBusInterface;
class QueryBus
{
use HandleTrait;
public function __construct(
private MessageBusInterface $messageBus,
) {
}
/**
* @param object|Envelope $query
*
* @return mixed The handler returned value
*/
public function query($query): mixed
{
return $this->handle($query);
}
}
Symfony will normally :ref:`find and register your handler automatically <messenger-handler>`.
But, you can also configure a handler manually - and pass it some extra config -
while using #AsMessageHandler attribute or tagging the handler service
with messenger.message_handler.
.. configuration-block::
.. code-block:: php-attributes
// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;
use App\Message\OtherSmsNotification;
use App\Message\SmsNotification;
use Symfony\Component\Messenger\Attribute\AsMessageHandler;
#[AsMessageHandler(fromTransport: 'async', priority: 10)]
class SmsNotificationHandler
{
public function __invoke(SmsNotification $message): void
{
// ...
}
}
.. code-block:: yaml
# config/services.yaml
services:
App\MessageHandler\SmsNotificationHandler:
tags: [messenger.message_handler]
# or configure with options
tags:
-
name: messenger.message_handler
# only needed if can't be guessed by type-hint
handles: App\Message\SmsNotification
.. code-block:: xml
<!-- config/services.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd">
<services>
<service id="App\MessageHandler\SmsNotificationHandler">
<!-- handles is only needed if it can't be guessed by type-hint -->
<tag name="messenger.message_handler"
handles="App\Message\SmsNotification"/>
</service>
</services>
</container>
.. code-block:: php
// config/services.php
use App\Message\SmsNotification;
use App\MessageHandler\SmsNotificationHandler;
$container->register(SmsNotificationHandler::class)
->addTag('messenger.message_handler', [
// only needed if can't be guessed by type-hint
'handles' => SmsNotification::class,
]);
Possible options to configure with tags are:
bus- Name of the bus from which the handler can receive messages, by default all buses.
from_transport- Name of the transport from which the handler can receive messages, by default all transports.
handles- Type of messages (FQCN) that can be processed by the handler, only needed if can't be guessed by type-hint.
method- Name of the method that will process the message.
priority- Priority of the handler when multiple handlers can process the same message.
A single handler class can handle multiple messages. For that add the
#AsMessageHandler attribute to all the handling methods:
// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;
use App\Message\OtherSmsNotification;
use App\Message\SmsNotification;
class SmsNotificationHandler
{
#[AsMessageHandler]
public function handleSmsNotification(SmsNotification $message): void
{
// ...
}
#[AsMessageHandler]
public function handleOtherSmsNotification(OtherSmsNotification $message): void
{
// ...
}
}
A message handler can dispatch new messages while handling others, to either
the same or a different bus (if the application has
:ref:`multiple buses <messenger-multiple-buses>`). Any errors or exceptions that
occur during this process can have unintended consequences, such as:
- If using the
DoctrineTransactionMiddlewareand a dispatched message throws an exception, then any database transactions in the original handler will be rolled back. - If the message is dispatched to a different bus, then the dispatched message will be handled even if some code later in the current handler throws an exception.
Consider an application with both a command and an event bus. The application
dispatches a command named RegisterUser to the command bus. The command is
handled by the RegisterUserHandler which creates a User object, stores
that object to a database and dispatches a UserRegistered message to the event bus.
There are many handlers to the UserRegistered message, one handler may send
a welcome email to the new user. We are using the DoctrineTransactionMiddleware
to wrap all database queries in one database transaction.
Problem 1: If an exception is thrown when sending the welcome email, then
the user will not be created because the DoctrineTransactionMiddleware will
rollback the Doctrine transaction, in which the user has been created.
Problem 2: If an exception is thrown when saving the user to the database, the welcome email is still sent because it is handled asynchronously.
For many applications, the desired behavior is to only handle messages that
are dispatched by a handler once that handler has fully finished. This can be done by
using the DispatchAfterCurrentBusMiddleware and adding a
DispatchAfterCurrentBusStamp stamp to :ref:`the message Envelope <messenger-envelopes>`:
// src/Messenger/CommandHandler/RegisterUserHandler.php
namespace App\Messenger\CommandHandler;
use App\Entity\User;
use App\Messenger\Command\RegisterUser;
use App\Messenger\Event\UserRegistered;
use Doctrine\ORM\EntityManagerInterface;
use Symfony\Component\Messenger\Envelope;
use Symfony\Component\Messenger\MessageBusInterface;
use Symfony\Component\Messenger\Stamp\DispatchAfterCurrentBusStamp;
class RegisterUserHandler
{
public function __construct(
private MessageBusInterface $eventBus,
private EntityManagerInterface $em,
) {
}
public function __invoke(RegisterUser $command): void
{
$user = new User($command->getUuid(), $command->getName(), $command->getEmail());
$this->em->persist($user);
// The DispatchAfterCurrentBusStamp marks the event message to be handled
// only if this handler does not throw an exception.
$event = new UserRegistered($command->getUuid());
$this->eventBus->dispatch(
(new Envelope($event))
->with(new DispatchAfterCurrentBusStamp())
);
// ...
}
}
// src/Messenger/EventSubscriber/WhenUserRegisteredThenSendWelcomeEmail.php
namespace App\Messenger\EventSubscriber;
use App\Entity\User;
use App\Messenger\Event\UserRegistered;
use Doctrine\ORM\EntityManagerInterface;
use Symfony\Component\Mailer\MailerInterface;
use Symfony\Component\Mime\RawMessage;
class WhenUserRegisteredThenSendWelcomeEmail
{
public function __construct(
private MailerInterface $mailer,
EntityManagerInterface $em,
) {
}
public function __invoke(UserRegistered $event): void
{
$user = $this->em->getRepository(User::class)->find($event->getUuid());
$this->mailer->send(new RawMessage('Welcome '.$user->getFirstName()));
}
}This means that the UserRegistered message would not be handled until
after the RegisterUserHandler had completed and the new User was
persisted to the database. If the RegisterUserHandler encounters an
exception, the UserRegistered event will never be handled. And if an
exception is thrown while sending the welcome email, the Doctrine transaction
will not be rolled back.
Note
If WhenUserRegisteredThenSendWelcomeEmail throws an exception, that
exception will be wrapped into a DelayedMessageHandlingException. Using
DelayedMessageHandlingException::getWrappedExceptions will give you all
exceptions that are thrown while handling a message with the
DispatchAfterCurrentBusStamp.
The dispatch_after_current_bus middleware is enabled by default. If you're
configuring your middleware manually, be sure to register
dispatch_after_current_bus before doctrine_transaction in the middleware
chain. Also, the dispatch_after_current_bus middleware must be loaded for
all of the buses being used.
Each message can have multiple handlers, and when a message is consumed all of its handlers are called. But you can also configure a handler to only be called when it's received from a specific transport. This allows you to have a single message where each handler is called by a different "worker" that's consuming a different transport.
Suppose you have an UploadedImage message with two handlers:
ThumbnailUploadedImageHandler: you want this to be handled by a transport calledimage_transportNotifyAboutNewUploadedImageHandler: you want this to be handled by a transport calledasync_priority_normal
To do this, add the from_transport option to each handler. For example:
// src/MessageHandler/ThumbnailUploadedImageHandler.php
namespace App\MessageHandler;
use App\Message\UploadedImage;
#[AsMessageHandler(fromTransport: 'image_transport')]
class ThumbnailUploadedImageHandler
{
public function __invoke(UploadedImage $uploadedImage): void
{
// do some thumbnailing
}
}
And similarly:
// src/MessageHandler/NotifyAboutNewUploadedImageHandler.php
// ...
#[AsMessageHandler(fromTransport: 'async_priority_normal')]
class NotifyAboutNewUploadedImageHandler
{
// ...
}
Then, make sure to "route" your message to both transports:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
async_priority_normal: # ...
image_transport: # ...
routing:
# ...
'App\Message\UploadedImage': [image_transport, async_priority_normal]
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="async_priority_normal" dsn="..."/>
<framework:transport name="image_transport" dsn="..."/>
<framework:routing message-class="App\Message\UploadedImage">
<framework:sender service="image_transport"/>
<framework:sender service="async_priority_normal"/>
</framework:routing>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->transport('async_priority_normal')->dsn('...');
$messenger->transport('image_transport')->dsn('...');
$messenger->routing('App\Message\UploadedImage')
->senders(['image_transport', 'async_priority_normal']);
};
That's it! You can now consume each transport:
# will only call ThumbnailUploadedImageHandler when handling the message
$ php bin/console messenger:consume image_transport -vv
$ php bin/console messenger:consume async_priority_normal -vv
Caution!
If a handler does not have from_transport config, it will be executed
on every transport that the message is received from.
You can declare "special" handlers which will process messages by batch. By doing so, the handler will wait for a certain amount of messages to be pending before processing them. The declaration of a batch handler is done by implementing :class:`Symfony\\Component\\Messenger\\Handler\\BatchHandlerInterface`. The :class:`Symfony\\Component\\Messenger\\Handler\\BatchHandlerTrait` is also provided in order to ease the declaration of these special handlers:
use Symfony\Component\Messenger\Handler\Acknowledger;
use Symfony\Component\Messenger\Handler\BatchHandlerInterface;
use Symfony\Component\Messenger\Handler\BatchHandlerTrait;
class MyBatchHandler implements BatchHandlerInterface
{
use BatchHandlerTrait;
public function __invoke(MyMessage $message, ?Acknowledger $ack = null): mixed
{
return $this->handle($message, $ack);
}
private function process(array $jobs): void
{
foreach ($jobs as [$message, $ack]) {
try {
// Compute $result from $message...
// Acknowledge the processing of the message
$ack->ack($result);
} catch (\Throwable $e) {
$ack->nack($e);
}
}
}
// Optionally, you can override some of the trait methods, such as the
// `getBatchSize()` method, to specify your own batch size...
private function getBatchSize(): int
{
return 100;
}
}
Note
When the $ack argument of __invoke() is null, the message is
expected to be handled synchronously. Otherwise, __invoke() is
expected to return the number of pending messages. The
:class:`Symfony\\Component\\Messenger\\Handler\\BatchHandlerTrait` handles
this for you.
Note
By default, pending batches are flushed when the worker is idle as well as when it is stopped.
A message can be any PHP object. Sometimes, you may need to configure something extra about the message - like the way it should be handled inside AMQP or adding a delay before the message should be handled. You can do that by adding a "stamp" to your message:
use Symfony\Component\Messenger\Envelope;
use Symfony\Component\Messenger\MessageBusInterface;
use Symfony\Component\Messenger\Stamp\DelayStamp;
public function index(MessageBusInterface $bus): void
{
// wait 5 seconds before processing
$bus->dispatch(new SmsNotification('...'), [
new DelayStamp(5000),
]);
// or explicitly create an Envelope
$bus->dispatch(new Envelope(new SmsNotification('...'), [
new DelayStamp(5000),
]));
// ...
}
Internally, each message is wrapped in an Envelope, which holds the message
and stamps. You can create this manually or allow the message bus to do it. There
are a variety of different stamps for different purposes and they're used internally
to track information about a message - like the message bus that's handling it
or if it's being retried after failure.
What happens when you dispatch a message to a message bus depends on its collection of middleware and their order. By default, the middleware configured for each bus looks like this:
add_bus_name_stamp_middleware- adds a stamp to record which bus this message was dispatched into;dispatch_after_current_bus- see :ref:`messenger-transactional-messages`;failed_message_processing_middleware- processes messages that are being retried via the :ref:`failure transport <messenger-failure-transport>` to make them properly function as if they were being received from their original transport;- Your own collection of middleware;
send_message- if routing is configured for the transport, this sends messages to that transport and stops the middleware chain;handle_message- calls the message handler(s) for the given message.
Note
These middleware names are actually shortcut names. The real service ids
are prefixed with messenger.middleware. (e.g. messenger.middleware.handle_message).
The middleware are executed when the message is dispatched but also again when a message is received via the worker (for messages that were sent to a transport to be handled asynchronously). Keep this in mind if you create your own middleware.
You can add your own middleware to this list, or completely disable the default middleware and only include your own.
If a middleware service is abstract, you can configure its constructor's arguments and a different instance will be created per bus.
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
buses:
messenger.bus.default:
# disable the default middleware
default_middleware: false
middleware:
# use and configure parts of the default middleware you want
- 'add_bus_name_stamp_middleware': ['messenger.bus.default']
# add your own services that implement Symfony\Component\Messenger\Middleware\MiddlewareInterface
- 'App\Middleware\MyMiddleware'
- 'App\Middleware\AnotherMiddleware'
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<!-- default-middleware: disable the default middleware -->
<framework:bus name="messenger.bus.default" default-middleware="false">
<!-- use and configure parts of the default middleware you want -->
<framework:middleware id="add_bus_name_stamp_middleware">
<framework:argument>messenger.bus.default</framework:argument>
</framework:middleware>
<!-- add your own services that implement Symfony\Component\Messenger\Middleware\MiddlewareInterface -->
<framework:middleware id="App\Middleware\MyMiddleware"/>
<framework:middleware id="App\Middleware\AnotherMiddleware"/>
</framework:bus>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$bus = $messenger->bus('messenger.bus.default')
->defaultMiddleware(false); // disable the default middleware
// use and configure parts of the default middleware you want
$bus->middleware()->id('add_bus_name_stamp_middleware')->arguments(['messenger.bus.default']);
// add your own services that implement Symfony\Component\Messenger\Middleware\MiddlewareInterface
$bus->middleware()->id('App\Middleware\MyMiddleware');
$bus->middleware()->id('App\Middleware\AnotherMiddleware');
};
If you use Doctrine in your app, a number of optional middleware exist that you may want to use:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
buses:
command_bus:
middleware:
# each time a message is handled, the Doctrine connection
# is "pinged" and reconnected if it's closed. Useful
# if your workers run for a long time and the database
# connection is sometimes lost
- doctrine_ping_connection
# After handling, the Doctrine connection is closed,
# which can free up database connections in a worker,
# instead of keeping them open forever
- doctrine_close_connection
# logs an error when a Doctrine transaction was opened but not closed
- doctrine_open_transaction_logger
# wraps all handlers in a single Doctrine transaction
# handlers do not need to call flush() and an error
# in any handler will cause a rollback
- doctrine_transaction
# or pass a different entity manager to any
#- doctrine_transaction: ['custom']
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:bus name="command_bus">
<framework:middleware id="doctrine_transaction"/>
<framework:middleware id="doctrine_ping_connection"/>
<framework:middleware id="doctrine_close_connection"/>
<framework:middleware id="doctrine_open_transaction_logger"/>
<!-- or pass a different entity manager to any -->
<!--
<framework:middleware id="doctrine_transaction">
<framework:argument>custom</framework:argument>
</framework:middleware>
-->
</framework:bus>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$bus = $messenger->bus('command_bus');
$bus->middleware()->id('doctrine_transaction');
$bus->middleware()->id('doctrine_ping_connection');
$bus->middleware()->id('doctrine_close_connection');
$bus->middleware()->id('doctrine_open_transaction_logger');
// Using another entity manager
$bus->middleware()->id('doctrine_transaction')
->arguments(['custom']);
};
Add the router_context middleware if you need to generate absolute URLs in
the consumer (e.g. render a template with links). This middleware stores the
original request context (i.e. the host, the HTTP port, etc.) which is needed
when building absolute URLs.
Add the validation middleware if you need to validate the message
object using the :doc:`Validator component </components/validator>` before handling it.
If validation fails, a ValidationFailedException will be thrown. The
:class:`Symfony\\Component\\Messenger\\Stamp\\ValidationStamp` can be used
to configure the validation groups.
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
buses:
command_bus:
middleware:
- router_context
- validation
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:bus name="command_bus">
<framework:middleware id="router_context"/>
<framework:middleware id="validation"/>
</framework:bus>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$bus = $messenger->bus('command_bus');
$bus->middleware()->id('router_context');
$bus->middleware()->id('validation');
};
In addition to middleware, Messenger also dispatches several events. You can :doc:`create an event listener </event_dispatcher>` to hook into various parts of the process. For each, the event class is the event name:
- :class:`Symfony\\Component\\Messenger\\Event\\SendMessageToTransportsEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerMessageFailedEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerMessageHandledEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerMessageReceivedEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerMessageRetriedEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerRateLimitedEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerRunningEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerStartedEvent`
- :class:`Symfony\\Component\\Messenger\\Event\\WorkerStoppedEvent`
It's possible to have messenger pass additional data to the message handler using the :class:`Symfony\\Component\\Messenger\\Stamp\\HandlerArgumentsStamp`. Add this stamp to the envelope in a middleware and fill it with any additional data you want to have available in the handler:
// src/Messenger/AdditionalArgumentMiddleware.php
namespace App\Messenger;
use Symfony\Component\Messenger\Envelope;
use Symfony\Component\Messenger\Middleware\MiddlewareInterface;
use Symfony\Component\Messenger\Middleware\StackInterface;
use Symfony\Component\Messenger\Stamp\HandlerArgumentsStamp;
final class AdditionalArgumentMiddleware implements MiddlewareInterface
{
public function handle(Envelope $envelope, StackInterface $stack): Envelope
{
$envelope = $envelope->with(new HandlerArgumentsStamp([
$this->resolveAdditionalArgument($envelope->getMessage()),
]));
return $stack->next()->handle($envelope, $stack);
}
private function resolveAdditionalArgument(object $message): mixed
{
// ...
}
}
Then your handler will look like this:
// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;
use App\Message\SmsNotification;
final class SmsNotificationHandler
{
public function __invoke(SmsNotification $message, mixed $additionalArgument)
{
// ...
}
}
If you receive messages from other applications, it's possible that they are not
exactly in the format you need. Not all applications will return a JSON message
with body and headers fields. In those cases, you'll need to create a
new message serializer implementing the
:class:`Symfony\\Component\\Messenger\\Transport\\Serialization\\SerializerInterface`.
Let's say you want to create a message decoder:
namespace App\Messenger\Serializer;
use Symfony\Component\Messenger\Envelope;
use Symfony\Component\Messenger\Transport\Serialization\SerializerInterface;
class MessageWithTokenDecoder implements SerializerInterface
{
public function decode(array $encodedEnvelope): Envelope
{
try {
// parse the data you received with your custom fields
$data = $encodedEnvelope['data'];
$data['token'] = $encodedEnvelope['token'];
// other operations like getting information from stamps
} catch (\Throwable $throwable) {
// wrap any exception that may occur in the envelope to send it to the failure transport
return new Envelope($throwable);
}
return new Envelope($data);
}
public function encode(Envelope $envelope): array
{
// this decoder does not encode messages, but you can implement it by returning
// an array with serialized stamps if you need to send messages in a custom format
throw new \LogicException('This serializer is only used for decoding messages.');
}
}
The next step is to tell Symfony to use this serializer in one or more of your transports:
.. configuration-block::
.. code-block:: yaml
# config/packages/messenger.yaml
framework:
messenger:
transports:
my_transport:
dsn: '%env(MY_TRANSPORT_DSN)%'
serializer: 'App\Messenger\Serializer\MessageWithTokenDecoder'
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:messenger>
<framework:transport name="my_transport" dsn="%env(MY_TRANSPORT_DSN)%" serializer="App\Messenger\Serializer\MessageWithTokenDecoder">
<!-- ... -->
</framework:transport>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use App\Messenger\Serializer\MessageWithTokenDecoder;
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
$messenger = $framework->messenger();
$messenger->transport('my_transport')
->dsn('%env(MY_TRANSPORT_DSN)%')
->serializer(MessageWithTokenDecoder::class);
};
Messenger gives you a single message bus service by default. But, you can configure as many as you want, creating "command", "query" or "event" buses and controlling their middleware.
A common architecture when building applications is to separate commands from queries. Commands are actions that do something and queries fetch data. This is called CQRS (Command Query Responsibility Segregation). See Martin Fowler's article about CQRS to learn more. This architecture could be used together with the Messenger component by defining multiple buses.
A command bus is a little different from a query bus. For example, command buses usually don't provide any results and query buses are rarely asynchronous. You can configure these buses and their rules by using middleware.
It might also be a good idea to separate actions from reactions by introducing an event bus. The event bus could have zero or more subscribers.
.. configuration-block::
.. code-block:: yaml
framework:
messenger:
# The bus that is going to be injected when injecting MessageBusInterface
default_bus: command.bus
buses:
command.bus:
middleware:
- validation
- doctrine_transaction
query.bus:
middleware:
- validation
event.bus:
default_middleware:
enabled: true
# set "allow_no_handlers" to true (default is false) to allow having
# no handler configured for this bus without throwing an exception
allow_no_handlers: false
# set "allow_no_senders" to false (default is true) to throw an exception
# if no sender is configured for this bus
allow_no_senders: true
middleware:
- validation
.. code-block:: xml
<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<!-- The bus that is going to be injected when injecting MessageBusInterface -->
<framework:messenger default-bus="command.bus">
<framework:bus name="command.bus">
<framework:middleware id="validation"/>
<framework:middleware id="doctrine_transaction"/>
</framework:bus>
<framework:bus name="query.bus">
<framework:middleware id="validation"/>
</framework:bus>
<framework:bus name="event.bus">
<!-- set "allow-no-handlers" to true (default is false) to allow having
no handler configured for this bus without throwing an exception -->
<!-- set "allow-no-senders" to false (default is true) to throw an exception
if no sender is configured for this bus -->
<framework:default-middleware enabled="true" allow-no-handlers="false" allow-no-senders="true"/>
<framework:middleware id="validation"/>
</framework:bus>
</framework:messenger>
</framework:config>
</container>
.. code-block:: php
// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
// The bus that is going to be injected when injecting MessageBusInterface
$framework->messenger()->defaultBus('command.bus');
$commandBus = $framework->messenger()->bus('command.bus');
$commandBus->middleware()->id('validation');
$commandBus->middleware()->id('doctrine_transaction');
$queryBus = $framework->messenger()->bus('query.bus');
$queryBus->middleware()->id('validation');
$eventBus = $framework->messenger()->bus('event.bus');
$eventBus->defaultMiddleware()
->enabled(true)
// set "allowNoHandlers" to true (default is false) to allow having
// no handler configured for this bus without throwing an exception
->allowNoHandlers(false)
// set "allowNoSenders" to false (default is true) to throw an exception
// if no sender is configured for this bus
->allowNoSenders(true)
;
$eventBus->middleware()->id('validation');
};
This will create three new services:
command.bus: autowireable with the :class:`Symfony\\Component\\Messenger\\MessageBusInterface` type-hint (because this is thedefault_bus);query.bus: autowireable withMessageBusInterface $queryBus;event.bus: autowireable withMessageBusInterface $eventBus.
By default, each handler will be available to handle messages on all
of your buses. To prevent dispatching a message to the wrong bus without an error,
you can restrict each handler to a specific bus using the messenger.message_handler tag:
.. configuration-block::
.. code-block:: yaml
# config/services.yaml
services:
App\MessageHandler\SomeCommandHandler:
tags: [{ name: messenger.message_handler, bus: command.bus }]
.. code-block:: xml
<!-- config/services.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd">
<services>
<service id="App\MessageHandler\SomeCommandHandler">
<tag name="messenger.message_handler" bus="command.bus"/>
</service>
</services>
</container>
.. code-block:: php
// config/services.php
$container->services()
->set(App\MessageHandler\SomeCommandHandler::class)
->tag('messenger.message_handler', ['bus' => 'command.bus']);
This way, the App\MessageHandler\SomeCommandHandler handler will only be
known by the command.bus bus.
You can also automatically add this tag to a number of classes by using the :ref:`_instanceof service configuration <di-instanceof>`. Using this, you can determine the message bus based on an implemented interface:
.. configuration-block::
.. code-block:: yaml
# config/services.yaml
services:
# ...
_instanceof:
# all services implementing the CommandHandlerInterface
# will be registered on the command.bus bus
App\MessageHandler\CommandHandlerInterface:
tags:
- { name: messenger.message_handler, bus: command.bus }
# while those implementing QueryHandlerInterface will be
# registered on the query.bus bus
App\MessageHandler\QueryHandlerInterface:
tags:
- { name: messenger.message_handler, bus: query.bus }
.. code-block:: xml
<!-- config/services.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd">
<services>
<!-- ... -->
<!-- all services implementing the CommandHandlerInterface
will be registered on the command.bus bus -->
<instanceof id="App\MessageHandler\CommandHandlerInterface">
<tag name="messenger.message_handler" bus="command.bus"/>
</instanceof>
<!-- while those implementing QueryHandlerInterface will be
registered on the query.bus bus -->
<instanceof id="App\MessageHandler\QueryHandlerInterface">
<tag name="messenger.message_handler" bus="query.bus"/>
</instanceof>
</services>
</container>
.. code-block:: php
// config/services.php
namespace Symfony\Component\DependencyInjection\Loader\Configurator;
use App\MessageHandler\CommandHandlerInterface;
use App\MessageHandler\QueryHandlerInterface;
return function(ContainerConfigurator $container): void {
$services = $container->services();
// ...
// all services implementing the CommandHandlerInterface
// will be registered on the command.bus bus
$services->instanceof(CommandHandlerInterface::class)
->tag('messenger.message_handler', ['bus' => 'command.bus']);
// while those implementing QueryHandlerInterface will be
// registered on the query.bus bus
$services->instanceof(QueryHandlerInterface::class)
->tag('messenger.message_handler', ['bus' => 'query.bus']);
};
The debug:messenger command lists available messages & handlers per bus.
You can also restrict the list to a specific bus by providing its name as an argument.
$ php bin/console debug:messenger
Messenger
=========
command.bus
-----------
The following messages can be dispatched:
---------------------------------------------------------------------------------------
App\Message\DummyCommand
handled by App\MessageHandler\DummyCommandHandler
App\Message\MultipleBusesMessage
handled by App\MessageHandler\MultipleBusesMessageHandler
---------------------------------------------------------------------------------------
query.bus
---------
The following messages can be dispatched:
---------------------------------------------------------------------------------------
App\Message\DummyQuery
handled by App\MessageHandler\DummyQueryHandler
App\Message\MultipleBusesMessage
handled by App\MessageHandler\MultipleBusesMessageHandler
---------------------------------------------------------------------------------------
Tip
The command will also show the PHPDoc description of the message and handler classes.
If you want to redispatch a message (using the same transport and envelope), create
a new :class:`Symfony\\Component\\Messenger\\Message\\RedispatchMessage` and dispatch
it through your bus. Reusing the same SmsNotification example shown earlier:
// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;
use App\Message\SmsNotification;
use Symfony\Component\Messenger\Attribute\AsMessageHandler;
use Symfony\Component\Messenger\Message\RedispatchMessage;
use Symfony\Component\Messenger\MessageBusInterface;
#[AsMessageHandler]
class SmsNotificationHandler
{
public function __construct(private MessageBusInterface $bus)
{
}
public function __invoke(SmsNotification $message): void
{
// do something with the message
// then redispatch it based on your own logic
if ($needsRedispatch) {
$this->bus->dispatch(new RedispatchMessage($message));
}
}
}
The built-in :class:`Symfony\\Component\\Messenger\\Handler\\RedispatchMessageHandler`
will take care of this message to redispatch it through the same bus it was
dispatched at first. You can also use the second argument of the RedispatchMessage
constructor to provide transports to use when redispatching the message.
.. toctree::
:maxdepth: 1
:glob:
/messenger/*