【Help】）LOLIN S2 MINI（ESP32S2） + SX1262 Starting LoRa failed!

[skylai82]

Pls help! Why my Lora Starting failed???

#include <SPI.h>
#include <LoRa.h>

int counter = 0;

// custom_SPI
int custom_MOSI = 37;
int custom_MISO = 39;
int custom_SCK = 35;
const int custom_SS = 33;

//Lora Pin
// int lora_reset = NULL;
// int lora_dio0 = 11;

void setup() {
Serial.begin(9600);
while (!Serial);
delay(2000);

pinMode(custom_SCK,OUTPUT);
pinMode(custom_MISO,OUTPUT);
pinMode(custom_MOSI,INPUT_PULLUP);
pinMode(custom_SS,OUTPUT);

// Initial custom_SPI
SPI.begin(custom_SCK, custom_MISO, custom_MOSI, custom_SS);
// Print custom_SPI pin
Serial.print("Custom MOSI: ");
Serial.println(custom_MOSI);
Serial.print("Custom MISO: ");
Serial.println(custom_MISO);
Serial.print("Custom SCK: ");
Serial.println(custom_SCK);
Serial.print("Custom SS: ");
Serial.println(custom_SS);

Serial.println("");

// Serial.println("LoRa Sender");
// LoRa.setPins(custom_SS, reset, lora_dio0);
// Serial.print("Custom_SS: ");
// Serial.println(custom_SS);
// Serial.print("reset: ");
// Serial.println(reset);
// Serial.print("lora_dio0: ");
// Serial.println(lora_dio0);

while (!LoRa.begin(915E6)) {
Serial.println("Starting LoRa failed!");
delay(1000);
// while (1);
}
}

void loop() {
Serial.print("Sending packet: ");
Serial.println(counter);

// send packet
LoRa.beginPacket();
LoRa.print("hello ");
LoRa.print(counter);
LoRa.endPacket();

counter++;

delay(5000);
}

[morganrallen]

This drive is not compatible with SX1262, only the older SX127x series.