Skip to content

Latest commit

 

History

History
184 lines (136 loc) · 6.53 KB

PACKAGING.md

File metadata and controls

184 lines (136 loc) · 6.53 KB

Packaging river for distribution

First of all, I apologize for writing river in Zig. It will likely make your job harder until Zig is more mature/stable. I do however believe that writing my software in Zig allows me to deliver the best quality I can despite the drawbacks of depending on a relatively immature language/toolchain.

Source tarballs

Source tarballs with stable checksums and git submodule sources included may be found on the codeberg releases page. These tarballs are signed with the PGP key available on my website at https://isaacfreund.com/public_key.txt.

For the 0.1.3 release for example, the tarball and signature URLs are:

https://codeberg.org/river/river/releases/download/v0.1.3/river-0.1.3.tar.gz
https://codeberg.org/river/river/releases/download/v0.1.3/river-0.1.3.tar.gz.sig

Zig version

Until Zig 1.0, Zig releases will often have breaking changes that prevent river from building. River tracks the latest minor version Zig release and is only compatible with that release and any patch releases. At the time of writing for example river is compatible with Zig 0.9.0 and 0.9.1 but not Zig 0.8.0 or 0.10.0.

Zig Package Manager

River uses the built-in Zig package manager for its (few) Zig dependencies. By default, running zig build will fetch river's Zig dependencies from the internet and store them in the global zig cache before building river. Since accessing the internet is forbidden or at least frowned upon by most distro packaging infrastructure, there are ways to fetch the Zig dependencies in a separate step before building river:

  1. Fetch step with internet access:

    For each package in the build.zig.zon manifest file run the following command with the tarball URL in the build.zig.zon:

    zig fetch --global-cache-dir /tmp/foobar $URL
    

    This command will download and unpack the tarball, hash the contents of the tarball, and store the contents in the /tmp/foobar/p/$HASH directory. This hash should match the corresponding hash field in the build.zig.zon.

  2. Build step with no internet access:

    The --system flag for zig build takes a path to an arbitrary directory in which zig packages stored in subdirectories matching their hash can be found.

    zig build --system /tmp/foobar/p/ ...
    

    This flag will disable all internet access and error if a package is not found in the provided directory.

It is also possible for distros to distribute Zig package manager packages as distro packages, although there are still some rough edges as the support for this is not yet mature. See this patchset for Chimera Linux for an example of how this can work: chimera-linux/cports#1395

Build options

River is built using the Zig build system. To see all available build options run zig build --help.

Important: By default Zig will build for the host system/cpu using the equivalent of -march=native. To produce a portable binary -Dcpu=baseline at a minimum must be passed.

Here are a few other options that are particularly relevant to packagers:

  • -Dcpu=baseline: Build for the "baseline" CPU of the target architecture, or any other CPU/feature set (e.g. -Dcpu=x86_64_v2).

    • Individual features can be added/removed with +/- (e.g. -Dcpu=x86_64+avx2-cmov).

    • For a list of CPUs see for example zig targets | jq '.cpus.x86_64 | keys'.

    • For a list of features see for example zig targets | jq '.cpusFeatures.x86_64'.

  • -Dtarget=x86_64-linux-gnu: Target architecture, OS, and ABI triple. See the output of zig targets for an exhaustive list of targets and CPU features, use of jq(1) to inspect the output recommended.

  • -Dpie: Build a position independent executable.

  • -Dstrip: Build without debug info. This not the same as invoking strip(1) on the resulting binary as it prevents the compiler from emitting debug info in the first place. For greatest effect, both may be used.

  • --sysroot /path/to/sysroot: Set the sysroot for cross compilation.

  • --libc my_libc.txt: Set system libc paths for cross compilation. Run zig libc to see a documented template for what this file should contain.

  • Enable compiler optimizations:

    • -Doptimize=ReleaseSafe: Optimize for execution speed, keep all assertions and runtime safety checks active.

    • -Doptimize=ReleaseFast: Optimize for execution speed, disable all assertions and runtime safety checks.

    • -Doptimize=ReleaseSmall: Optimize for binary size, disable all assertions and runtime safety checks.

Please use -Doptimize=ReleaseSafe when building river for general use. CPU execution speed is not the performance bottleneck for river, the GPU is. Additionally, the increased safety is more than worth the binary size trade-off in my opinion.

Build prefix and DESTDIR

To control the build prefix and directory use --prefix and the DESTDIR environment variable. For example

DESTDIR="/foo/bar" zig build --prefix /usr install

will install river to /foo/bar/usr/bin/river.

The Zig build system only has a single install step, there is no way to build artifacts for a given prefix and then install those artifacts to that prefix at some later time. However, much existing distribution packaging tooling expect separate build and install steps. To fit the Zig build system into this tooling, I recommend the following pattern:

build() {
    DESTDIR="/tmp/river-destdir" zig build --prefix /usr install
}

install() {
    cp -r /tmp/river-destdir/* /desired/install/location
}

River specific suggestions

I recommend installing the example init file found at example/init to /usr/share/examples/river/init or similar if your distribution has such a convention.

Examples

Build for the host architecture and libc ABI:

DESTDIR=/foo/bar zig build -Doptimize=ReleaseSafe -Dcpu=baseline \
    -Dstrip -Dpie --prefix /usr install

Cross compile for aarch64 musl libc based linux:

cat > xbps_zig_libc.txt <<-EOF
    include_dir=${XBPS_CROSS_BASE}/usr/include
    sys_include_dir=${XBPS_CROSS_BASE}/usr/include
    crt_dir=${XBPS_CROSS_BASE}/usr/lib
    msvc_lib_dir=
    kernel32_lib_dir=
    gcc_dir=
EOF

DESTDIR="/foo/bar" zig build \
    --sysroot "${XBPS_CROSS_BASE}" \
    --libc xbps_zig_libc.txt \
    -Dtarget=aarch64-linux-musl -Dcpu=baseline \
    -Doptimize=ReleaseSafe -Dstrip -Dpie \
    --prefix /usr install

Questions?

If you have any questions feel free to reach out to me at [email protected] or in #zig or #river on irc.libera.chat, my nick is ifreund.