Fix README formatting

mlobstein · mlobstein · commit 20f36cb1541d · 2024-10-22T21:39:33.000-05:00
Signed-off-by: Michael Lobstein &lt;michael.lobstein@gmail.com&gt;
diff --git a/bundles/org.openhab.binding.kaleidescape/README.md b/bundles/org.openhab.binding.kaleidescape/README.md
@@ -13,10 +13,10 @@ All movie player components including the original K-Player series, M Class Play
 It is important to choose the correct thing type to ensure the available channels are correct for the component being used.
 
 The supported thing types are:
-`player` Any KPlayer, M Class [M300, M500, M700] or Cinema One 1st Gen player
-`cinemaone` Cinema One (2nd Gen)
-`alto`
-`strato` Includes Strato, Strato S, Strato C or Strato V
+- `player` Any KPlayer, M Class [M300, M500, M700] or Cinema One 1st Gen player
+- `cinemaone` Cinema One (2nd Gen)
+- `alto`
+- `strato` Includes Strato, Strato S, Strato C or Strato V
 
 The binding supports either a TCP/IP connection or direct serial port connection (19200-8-N-1) to the Kaleidescape component.
 
diff --git a/bundles/org.openhab.binding.panasonicbdp/README.md b/bundles/org.openhab.binding.panasonicbdp/README.md
@@ -1,27 +1,32 @@
 # Panasonic Blu-ray Player Binding
 
 This binding connects Panasonic Blu-ray players from 2011/2012 and UHD Blu-ray players from 2018 to openHAB.
+
 **Supported Blu-ray models:** DMP-BDT110, DMP-BDT210, DMP-BDT310, DMP-BDT120, DMP-BDT220, DMP-BDT320, DMP-BBT01 & DMP-BDT500.
+
 **Supported UHD models:** DP-UB420/424, DP-UB820/824 & DP-UB9000/9004.
 
 **Please note:** The player must be on the same IP subnet as the openHAB server for this binding to function.
 If the connection to the player originates from a different subnet, 404 response errors are sent in response to all requests.
 
 To enable network remote control of the Blu-ray model players, configure the following settings:
-**Player Settings/Network/Network Settings/Remote Device Settings**
+- **Player Settings/Network/Network Settings/Remote Device Settings**
+
 Then make sure you have the following values set:
-**Remote Device Operation: On**
-**Registration Type: Automatic**
+- **Remote Device Operation: On**
+- **Registration Type: Automatic**
 
 For the UHD models, Voice Control must be enabled for the player's http interface to be active:
-**Player Settings/Network/Voice Control: On**
+- **Player Settings/Network/Voice Control: On**
 
 To enable the binding to control the player while off (network active while off), Quick Start mode must be On as follows:
-**Player Settings/System/Quick Start: On**
+- **Player Settings/System/Quick Start: On**
 
 **UHD Model Command Authentication:**
+
 The UHD models require authentication to use the control API.
 A player key must be specified in the thing configuration in order for the `power`, `button` and `control` channels to work.
+
 UHD model players that are patched do not require a player key.
 See the [AVForums discussions](https://www.avforums.com/forums/blu-ray-dvd-player-multiregion-hacks.126/) of the DP-UB420/820/9000 players for more information.
 
diff --git a/bundles/org.openhab.binding.roku/README.md b/bundles/org.openhab.binding.roku/README.md
@@ -57,37 +57,37 @@ Some Notes:
 - The values for `activeApp`, `activeAppName`, `playMode`, `timeElapsed`, `timeTotal`, `activeChannel`, `signalMode`, `signalQuality`, `channelName`, `programTitle`, `programDescription`, `programRating`, `power` & `powerState` refresh automatically per the configured `refresh` interval.
 
 **List of available button commands for Roku streaming devices:**
-Home
-Rev
-Fwd
-Play
-Select
-Left
-Right
-Up
-Down
-Back
-InstantReplay
-Info
-Backspace
-Search
-Enter
-FindRemote
+- Home
+- Rev
+- Fwd
+- Play
+- Select
+- Left
+- Right
+- Up
+- Down
+- Back
+- InstantReplay
+- Info
+- Backspace
+- Search
+- Enter
+- FindRemote
 
 **List of additional button commands for Roku TVs:**
-ChannelUp
-ChannelDown
-VolumeUp
-VolumeDown
-VolumeMute
-InputTuner
-InputHDMI1
-InputHDMI2
-InputHDMI3
-InputHDMI4
-InputAV1
-PowerOff
-POWERON _(NOTE: POWERON needs to be completely capitalized due to a bug with older Roku devices)_
+- ChannelUp
+- ChannelDown
+- VolumeUp
+- VolumeDown
+- VolumeMute
+- InputTuner
+- InputHDMI1
+- InputHDMI2
+- InputHDMI3
+- InputHDMI4
+- InputAV1
+- PowerOff
+- POWERON _(NOTE: POWERON needs to be completely capitalized due to a bug with older Roku devices)_
 
 ## Full Example
 
diff --git a/bundles/org.openhab.binding.tivo/README.md b/bundles/org.openhab.binding.tivo/README.md
@@ -66,61 +66,61 @@ All devices support the following channels:
 - Special characters must also be changed to the appropriate command e.g. the comma symbol(`,`) must not be sent it should be replaced by 'COMMA'.
 
 Available IR Commands to use with `irCommand` channel:
-UP
-DOWN
-LEFT
-RIGHT
-SELECT
-TIVO
-LIVETV
-GUIDE
-BACK
-INFO
-EXIT
-THUMBSUP
-THUMBSDOWN
-CHANNELUP
-CHANNELDOWN
-PLAY
-FORWARD
-REVERSE
-PAUSE
-SLOW
-REPLAY
-ADVANCE
-RECORD
-NUM0
-NUM1
-NUM2
-NUM3
-NUM4
-NUM5
-NUM6
-NUM7
-NUM8
-NUM9
-ENTER
-CLEAR
-ACTION_A
-ACTION_B
-ACTION_C
-ACTION_D
-CC_ON
-CC_OFF
-FIND_REMOTE
-STANDBY
-ASPECT_CORRECTION_FULL
-ASPECT_CORRECTION_PANEL
-ASPECT_CORRECTION_ZOOM
-ASPECT_CORRECTION_WIDE_ZOOM
-VIDEO_MODE_FIXED_480i
-VIDEO_MODE_FIXED_480p
-VIDEO_MODE_FIXED_720p
-VIDEO_MODE_FIXED_1080i
-VIDEO_MODE_HYBRID
-VIDEO_MODE_HYBRID_720p
-VIDEO_MODE_HYBRID_1080i
-VIDEO_MODE_NATIVE
+- UP
+- DOWN
+- LEFT
+- RIGHT
+- SELECT
+- TIVO
+- LIVETV
+- GUIDE
+- BACK
+- INFO
+- EXIT
+- THUMBSUP
+- THUMBSDOWN
+- CHANNELUP
+- CHANNELDOWN
+- PLAY
+- FORWARD
+- REVERSE
+- PAUSE
+- SLOW
+- REPLAY
+- ADVANCE
+- RECORD
+- NUM0
+- NUM1
+- NUM2
+- NUM3
+- NUM4
+- NUM5
+- NUM6
+- NUM7
+- NUM8
+- NUM9
+- ENTER
+- CLEAR
+- ACTION_A
+- ACTION_B
+- ACTION_C
+- ACTION_D
+- CC_ON
+- CC_OFF
+- FIND_REMOTE
+- STANDBY
+- ASPECT_CORRECTION_FULL
+- ASPECT_CORRECTION_PANEL
+- ASPECT_CORRECTION_ZOOM
+- ASPECT_CORRECTION_WIDE_ZOOM
+- VIDEO_MODE_FIXED_480i
+- VIDEO_MODE_FIXED_480p
+- VIDEO_MODE_FIXED_720p
+- VIDEO_MODE_FIXED_1080i
+- VIDEO_MODE_HYBRID
+- VIDEO_MODE_HYBRID_720p
+- VIDEO_MODE_HYBRID_1080i
+- VIDEO_MODE_NATIVE
 
 ## Full Example
 
diff --git a/bundles/org.openhab.binding.vizio/README.md b/bundles/org.openhab.binding.vizio/README.md
@@ -71,37 +71,37 @@ The following channels are available:
 
 ### List of available button commands for Vizio TVs:
 
-PowerOn
-PowerOff
-PowerToggle
-VolumeUp
-VolumeDown
-MuteOn **(may only work as a toggle)**
-MuteOff **(may only work as a toggle)**
-MuteToggle
-ChannelUp
-ChannelDown
-PreviousCh
-InputToggle
-SeekFwd
-SeekBack
-Play
-Pause
-Up
-Down
-Left
-Right
-Ok
-Back
-Info
-Menu
-Home
-Exit
-Smartcast
-ccToggle
-PictureMode
-WideMode
-WideToggle
+- PowerOn
+- PowerOff
+- PowerToggle
+- VolumeUp
+- VolumeDown
+- MuteOn **(may only work as a toggle)**
+- MuteOff **(may only work as a toggle)**
+- MuteToggle
+- ChannelUp
+- ChannelDown
+- PreviousCh
+- InputToggle
+- SeekFwd
+- SeekBack
+- Play
+- Pause
+- Up
+- Down
+- Left
+- Right
+- Ok
+- Back
+- Info
+- Menu
+- Home
+- Exit
+- Smartcast
+- ccToggle
+- PictureMode
+- WideMode
+- WideToggle
 
 ### App List Configuration:
 
