Razer DeathAdder 3500 DPI is not detected at all

[ddnomad]

ddnomad@dracula:~$ xinput
⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ Razer Razer DeathAdder                    id=11   [slave  pointer  (2)]
⎜   ↳ ETPS/2 Elantech Touchpad                  id=15   [slave  pointer  (2)]

razercfg doesn't detect my mouse despite the fact it's listed and detected correctly by X.

ddnomad@dracula:~$ razercfg -d mouse
No Razer mouse found in the system

I even built the latest snapshot from this repo but the issue still exists.
If I can help you somehow - just say how :)

Some more system info: (lsinput output)

/dev/input/event7
   bustype : BUS_USB
   vendor  : 0x1532
   product : 0x54
   version : 273
   name    : "Razer Razer DeathAdder"
   phys    : "usb-0000:00:14.0-1/input0"
   uniq    : ""
   bits ev : EV_SYN EV_KEY EV_REL EV_MSC

[mbuesch]

Are you sure this really is a DeathAdder 3500 DPI? If so, Razer seems to have created a new device with an old name.

[ddnomad]

Well, as it clearly stated at the bottom of a mouse it should be DeathAdder 3500 DPI. See a picture: https://imgur.com/gallery/PLwxB

[mbuesch]

Thanks for the USB report.
This is a new device that is unsupported until somebody reverse engineers the wire protocol.

[h0rn3t]

I also have that model :(((((((

[h0rn3t]

@mbuesch what I need to do? run wireshark on windows and sniff usb, is it right?

[mbuesch]

https://bues.ch/h/razercfg#how_to_add_support_for_new_devices

[h0rn3t]

https://dl.dropboxusercontent.com/u/32082774/razer3500dpi.pcapng

[h0rn3t]

@ddnomad you can use #94 I tested it, all functions working fine

[ddnomad]

Thank you a lot!

I'll check it out.

On Wed, Nov 16, 2016 at 1:11 AM h0rn3t [email protected] wrote:

@ddnomad https://github.com/ddnomad you can use #94
#94 I tested it, all functions
working fine

—
You are receiving this because you were mentioned.

Reply to this email directly, view it on GitHub
#86 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AGZKlnr5lxKrV_MwgWm64ZejDfN1Z-6Zks5q-jw-gaJpZM4KKQWE
.

[h0rn3t]

@ddnomad for now you can take this more adapted version https://github.com/h0rn3t/razer/releases/tag/razercfg-0.38.1
now I working on it