diff --git a/translations/qgc_json_az_AZ.ts b/translations/qgc_json_az_AZ.ts index 11944a5943f..7b27176719f 100644 --- a/translations/qgc_json_az_AZ.ts +++ b/translations/qgc_json_az_AZ.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - İçəri,Bayır - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Heç vaxt, Həmişə, Uçuş rejimi məni izlədikdə - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Çox Rotor, Vertolyot, Təyyarə, Rover, Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Aparat ilə idarə olunur,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Gizlət, Göstər - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Uyğunluğu doldur, genişliyi doldur,Dart - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - Yox,Yox,2D Kilid,3D Kilid,3D DGPS Kilidi,3D RTK GPS Kilidi (dəyişkən),3D RTK GPS Kilidi (sabit),Statik (sabit) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Deaktiv,Aktiv - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Deaktiv,Aktiv,Mövcud deyil - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - Şimal,Cənub - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Yük kontrolu yerləşdirilməsi + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Foto,Video,Dolanma + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + Şimal,Cənub + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + Yox,Yox,2D Kilid,3D Kilid,3D DGPS Kilidi,3D RTK GPS Kilidi (dəyişkən),3D RTK GPS Kilidi (sabit),Statik (sabit) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Deaktiv,Aktiv + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Deaktiv,Aktiv,Mövcud deyil + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Çox Rotor, Vertolyot, Təyyarə, Rover, Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + İçəri,Bayır + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Heç vaxt, Həmişə, Uçuş rejimi məni izlədikdə + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Aparat ilə idarə olunur,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_bg_BG.ts b/translations/qgc_json_bg_BG.ts index d8273fe605d..84623f51aab 100644 --- a/translations/qgc_json_bg_BG.ts +++ b/translations/qgc_json_bg_BG.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_de_DE.ts b/translations/qgc_json_de_DE.ts index 116e70a3391..05ff76c5728 100644 --- a/translations/qgc_json_de_DE.ts +++ b/translations/qgc_json_de_DE.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_el_GR.ts b/translations/qgc_json_el_GR.ts index 3f26fe558f0..bba39d76e23 100644 --- a/translations/qgc_json_el_GR.ts +++ b/translations/qgc_json_el_GR.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_es_ES.ts b/translations/qgc_json_es_ES.ts index 23274904e66..47dca742e98 100644 --- a/translations/qgc_json_es_ES.ts +++ b/translations/qgc_json_es_ES.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Genérico - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Ala fija, Multi-Rotor,VTOL,Explorador,Sub,Mavlink Genérico - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Deshabilitado,error,advertencia,arréglame,info,debug,registrar,rastrear - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Interiores,exteriores - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Nunca,siempre,cuando esté en modo Sígueme - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicóptero,Avión,explorador,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlado por Vehículo,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Ocultar,Mostrar - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Ajustar anchura, ajustar altura, ajustar estrecho - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Por defecto,Forzar decodificador de software,Forzar decodificador NVIDIA,Forzar decodificador VA-API,Forzar decodificador DirectX3D 11,Forzar decodificador VideoToolbox - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,Todos los sistemas de vuelo,Propulsión,aviónica,carga útil - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Bajo,Crítico,Emergencia,Fallo,Insano,Cargando - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - Ninguno,ninguno,fijado 2d,fijado 3d, fijado 3D DGPS, fijado 3D gps rtk (flotante), fijado 3D gps rtk (fijo),estático (fijo) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Desactivado/activado - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Deshabilitado,Activado,No disponible - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - Norte,Sur - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1793,6 +1553,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1808,6 +1586,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + Norte,Sur + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,Todos los sistemas de vuelo,Propulsión,aviónica,carga útil + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Bajo,Crítico,Emergencia,Fallo,Insano,Cargando + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + Ninguno,ninguno,fijado 2d,fijado 3d, fijado 3D DGPS, fijado 3D gps rtk (flotante), fijado 3D gps rtk (fijo),estático (fijo) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Desactivado/activado + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Deshabilitado,Activado,No disponible + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicóptero,Avión,explorador,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Genérico + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Ala fija, Multi-Rotor,VTOL,Explorador,Sub,Mavlink Genérico + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Deshabilitado,error,advertencia,arréglame,info,debug,registrar,rastrear + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Interiores,exteriores + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Nunca,siempre,cuando esté en modo Sígueme + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Por defecto,Forzar decodificador de software,Forzar decodificador NVIDIA,Forzar decodificador VA-API,Forzar decodificador DirectX3D 11,Forzar decodificador VideoToolbox + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlado por Vehículo,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_fi_FI.ts b/translations/qgc_json_fi_FI.ts index 63d3225249a..6264b0a2a4d 100644 --- a/translations/qgc_json_fi_FI.ts +++ b/translations/qgc_json_fi_FI.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_fr_FR.ts b/translations/qgc_json_fr_FR.ts index 7b7df7d4da4..c17d7ff91eb 100644 --- a/translations/qgc_json_fr_FR.ts +++ b/translations/qgc_json_fr_FR.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Générique - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Intérieur, Extérieur - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Contrôlé par le véhicule,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Masquer/Afficher - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - Aucun,Aucun,Verrouillage 2D,Verrouillage 3D,Verrouillage 3D DGPS,Verrouillage GPS RTK 3D (flottant),Verrouillage GPS RTK 3D (fixe),Statique (fixe) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Activer,Désactiver - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Désactivé,Activé,Indisponible - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + Aucun,Aucun,Verrouillage 2D,Verrouillage 3D,Verrouillage 3D DGPS,Verrouillage GPS RTK 3D (flottant),Verrouillage GPS RTK 3D (fixe),Statique (fixe) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Activer,Désactiver + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Désactivé,Activé,Indisponible + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Générique + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Intérieur, Extérieur + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Contrôlé par le véhicule,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_he_IL.ts b/translations/qgc_json_he_IL.ts index dd19222cb08..547b0b80636 100644 --- a/translations/qgc_json_he_IL.ts +++ b/translations/qgc_json_he_IL.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_it_IT.ts b/translations/qgc_json_it_IT.ts index 6d48353e505..7d74bf6744e 100644 --- a/translations/qgc_json_it_IT.ts +++ b/translations/qgc_json_it_IT.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_ja_JP.ts b/translations/qgc_json_ja_JP.ts index 70ac2adc6fe..bca9bb1e057 100644 --- a/translations/qgc_json_ja_JP.ts +++ b/translations/qgc_json_ja_JP.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - 一体型コンパス/姿勢計, 水平コンパス/姿勢計, 大型垂直コンパス - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,MAVLink 汎用 - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - 固定翼機,マルチコプター,VTOL機,ローバー,サブマリン,MAVLink 汎用 - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - 無効,エラー,警告,FixMe,情報,デバッグ,ログ,トレース - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - 屋内,屋外 - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - 設定しない,常時設定,フォローミーモード時 - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - マルチローター,ヘリコプター,飛行機,ローバー,サブマリン - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - 機体による制御,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - パーセント, 電圧, パーセント & 電圧 - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - 非表示,表示 - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - フィット幅,フィット高,ストレッチ - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - デフォルト,ソフトウェア デコーダー,NVIDIA デコーダー,VA-API デコーダー,DirectX 3D 11 デコーダー,VideoToolbox デコーダー - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - フリーテキスト, 緊急性, 拡張ステータス - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - なし,シリアルナンバー(ANSI/CTA-2063),CAA,UTM(RFC4122),特定 - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - 未定義,飛行機/固定翼機,ヘリコプター/マルチローター,ジャイロプレーン,VTOL,羽ばたき飛行船,グライダー,カイト,フリーバロン,キャプティブバロン,飛行船,パラシュート,ロケット,テザー動力機,地上障害物,その他 - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - 離陸(未サポート),リアルタイムGNNS,固定 (FAA対象外) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - 未定義, EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - 未申請,公開,特定,認証済 - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - 未申請,クラス 0,クラス 1,クラス 2,クラス 3,クラス 4,クラス 5,クラス 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - クリックでポイント, クリックしてドラッグ - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - 該当なし,全フライトシステム,推進力,アビオニクス,ペイロード - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,OK,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - 無効,有効 - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - 無効,有効,利用不可 - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - 北,南 - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - ヨー - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - ピッチ - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ ペイロードの制御と展開 + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + ヨー + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + ピッチ + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ 写真,ビデオ,調査 + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + 北,南 + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + 該当なし,全フライトシステム,推進力,アビオニクス,ペイロード + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,OK,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + 無効,有効 + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + 無効,有効,利用不可 + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + 未定義,飛行機/固定翼機,ヘリコプター/マルチローター,ジャイロプレーン,VTOL,羽ばたき飛行船,グライダー,カイト,フリーバロン,キャプティブバロン,飛行船,パラシュート,ロケット,テザー動力機,地上障害物,その他 + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + 離陸(未サポート),リアルタイムGNNS,固定 (FAA対象外) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + 未申請,公開,特定,認証済 + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + 未申請,クラス 0,クラス 1,クラス 2,クラス 3,クラス 4,クラス 5,クラス 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + マルチローター,ヘリコプター,飛行機,ローバー,サブマリン + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,MAVLink 汎用 + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + 固定翼機,マルチコプター,VTOL機,ローバー,サブマリン,MAVLink 汎用 + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + 無効,エラー,警告,FixMe,情報,デバッグ,ログ,トレース + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + 屋内,屋外 + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + 設定しない,常時設定,フォローミーモード時 + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + パーセント, 電圧, パーセント & 電圧 + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + クリックでポイント, クリックしてドラッグ + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + デフォルト,ソフトウェア デコーダー,NVIDIA デコーダー,VA-API デコーダー,DirectX 3D 11 デコーダー,VideoToolbox デコーダー + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + 機体による制御,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_ko_KR.ts b/translations/qgc_json_ko_KR.ts index 06abc884769..4b5403f3d90 100644 --- a/translations/qgc_json_ko_KR.ts +++ b/translations/qgc_json_ko_KR.ts @@ -1,247 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - 아두파일럿,PX4 프로,일반 Mavlink 장치 - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - 실내,실외 - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - 하지 않음,항상 실행,Follow Me 모드에서만 실행 - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - 숨기기,표시 - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - 기본,소프트웨어 디코더 강제,NVIDIA 디코더 강제,VA-API 디코더 강제,DirectX3D 11 디코더 강제,VideoToolbox 디코더 강제 - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - N/A,모든 비행 시스템,추진체,전자,임무장비 - - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - N/A,리포,리페,리온,니켈수소 - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - N/A,확인,부족,심각,비상,실패,위험,충전중 - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - 사용 안 함,사용 - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - 사용 안 함,사용,사용 불가 - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - 북쪽,남쪽 - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - 요 - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - 피치 - - MavCmdInfoCommon.json @@ -254,7 +13,7 @@ .mavCmdInfo[HomeRaw].description, Planned home position for mission. - Planned home position for mission. + Planned home position for mission. .mavCmdInfo[HomeRaw].category, .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].category, .mavCmdInfo[MAV_CMD_NAV_RETURN_TO_LAUNCH].category, .mavCmdInfo[MAV_CMD_NAV_LAND].category, .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].category, .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].category, .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].category, .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].category, .mavCmdInfo[MAV_CMD_CONDITION_DELAY].category, @@ -284,7 +43,7 @@ .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].description, Travel to a position in 3D space. - Travel to a position in 3D space. + Travel to a position in 3D space. .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param1.label, .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].param1.label, .mavCmdInfo[MAV_CMD_NAV_DELAY].param1.label, @@ -296,13 +55,13 @@ .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param2.label, Acceptance - Acceptance + Acceptance .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param3.label, Pass Radius - Pass Radius + Pass Radius .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].param4.label, .mavCmdInfo[MAV_CMD_NAV_LAND].param4.label, .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].param4.label, .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].param4.label, .mavCmdInfo[MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW].param2.label, @@ -320,7 +79,7 @@ .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].description, Travel to a position and Loiter around the specified position indefinitely. - Travel to a position and Loiter around the specified position indefinitely. + Travel to a position and Loiter around the specified position indefinitely. .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].param3.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param3.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param3.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param2.label, @@ -332,55 +91,55 @@ .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].friendlyName, Loiter (turns) - Loiter (turns) + Loiter (turns) .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].description, Travel to a position and Loiter around the specified position for a number of turns. - Travel to a position and Loiter around the specified position for a number of turns. + Travel to a position and Loiter around the specified position for a number of turns. .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param1.label, Turns - Turns + Turns .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param2.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param2.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param1.label, Leave Loiter - Leave Loiter + Leave Loiter .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param2.enumStrings, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param1.enumStrings, Direction of next waypoint,Any direction - Direction of next waypoint,Any direction + Direction of next waypoint,Any direction .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param4.label, Exit loiter from - Exit loiter from + Exit loiter from .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param4.enumStrings, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param4.enumStrings, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param4.enumStrings, Center,Tangent - Center,Tangent + Center,Tangent .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].friendlyName, Loiter (time) - Loiter (time) + Loiter (time) .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].description, Travel to a position and Loiter around the specified position for an amount of time. - Travel to a position and Loiter around the specified position for an amount of time. + Travel to a position and Loiter around the specified position for an amount of time. .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param1.label, @@ -392,7 +151,7 @@ .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param2.enumStrings, Direction of next waypoint,Current direction - Direction of next waypoint,Current direction + Direction of next waypoint,Current direction .mavCmdInfo[MAV_CMD_NAV_RETURN_TO_LAUNCH].friendlyName, @@ -404,7 +163,7 @@ .mavCmdInfo[MAV_CMD_NAV_RETURN_TO_LAUNCH].description, Send the vehicle back to the launch position. - Send the vehicle back to the launch position. + Send the vehicle back to the launch position. .mavCmdInfo[MAV_CMD_NAV_LAND].friendlyName, @@ -416,13 +175,13 @@ .mavCmdInfo[MAV_CMD_NAV_LAND].description, Land vehicle at the specified location. - Land vehicle at the specified location. + Land vehicle at the specified location. .mavCmdInfo[MAV_CMD_NAV_LAND].param1.label, Abort Alt - Abort Alt + Abort Alt .mavCmdInfo[MAV_CMD_NAV_LAND].param2.label, @@ -434,7 +193,7 @@ .mavCmdInfo[MAV_CMD_NAV_LAND].param2.enumStrings, Disabled,Opportunistic,Required - Disabled,Opportunistic,Required + Disabled,Opportunistic,Required .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].friendlyName, @@ -446,25 +205,25 @@ .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].description, Launch from the ground and travel towards the specified takeoff position. - Launch from the ground and travel towards the specified takeoff position. + Launch from the ground and travel towards the specified takeoff position. .mavCmdInfo[MAV_CMD_NAV_LAND_LOCAL].friendlyName, Land local - Land local + Land local .mavCmdInfo[MAV_CMD_NAV_TAKEOFF_LOCAL].friendlyName, Takeoff local - Takeoff local + Takeoff local .mavCmdInfo[MAV_CMD_NAV_FOLLOW].friendlyName, Nav follow - Nav follow + Nav follow .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].friendlyName, @@ -476,13 +235,13 @@ .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].description, Continue on the current course and climb/descend to specified altitude. When the altitude is reached continue to the next command. - Continue on the current course and climb/descend to specified altitude. When the altitude is reached continue to the next command. + Continue on the current course and climb/descend to specified altitude. When the altitude is reached continue to the next command. .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].category, .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].category, .mavCmdInfo[MAV_CMD_DO_LAND_START].category, .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].category, Flight control - Flight control + Flight control .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_MODE].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_HOME].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_ROI].param1.label, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param1.label, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param1.label, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param7.label, .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].param2.label, .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].param1.label, @@ -494,7 +253,7 @@ .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].param1.enumStrings, Climb,Neutral,Descend - Climb,Neutral,Descend + Climb,Neutral,Descend .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].friendlyName, @@ -506,7 +265,7 @@ .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].description, Loiter at specified position until altitude reached. - Loiter at specified position until altitude reached. + Loiter at specified position until altitude reached. .mavCmdInfo[MAV_CMD_DO_FOLLOW].friendlyName, @@ -518,7 +277,7 @@ .mavCmdInfo[MAV_CMD_DO_FOLLOW_REPOSITION].friendlyName, Vehicle reposition - Vehicle reposition + Vehicle reposition .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].friendlyName, @@ -530,7 +289,7 @@ .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].description, Control autonomous path planning. - Control autonomous path planning. + Control autonomous path planning. .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].category, .mavCmdInfo[MAV_CMD_DO_SET_MODE].category, .mavCmdInfo[MAV_CMD_DO_JUMP].category, .mavCmdInfo[MAV_CMD_DO_SET_HOME].category, .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].category, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].category, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].category, .mavCmdInfo[MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW].category, .mavCmdInfo[MAV_CMD_DO_GRIPPER].category, .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].category, @@ -542,49 +301,49 @@ .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param1.label, Local planning - Local planning + Local planning .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param1.enumStrings, Disable,Enable,Enable+reset - Disable,Enable,Enable+reset + Disable,Enable,Enable+reset .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param2.label, Full planning - Full planning + Full planning .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param2.enumStrings, Disable,Enable,Enable+reset,Enable+reset route only - Disable,Enable,Enable+reset,Enable+reset route only + Disable,Enable,Enable+reset,Enable+reset route only .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param4.label, Heading goal - Heading goal + Heading goal .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].friendlyName, Spline waypoint - Spline waypoint + Spline waypoint .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].description, Travel to a position in 3D space using spline path. - Travel to a position in 3D space using spline path. + Travel to a position in 3D space using spline path. .mavCmdInfo[MAV_CMD_NAV_ALTITUDE_WAIT].friendlyName, Altitude wait - Altitude wait + Altitude wait .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].friendlyName, @@ -596,19 +355,19 @@ .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].description, Hover straight up to specified altitude, transition to fixed-wing and fly to the specified takeoff location. - Hover straight up to specified altitude, transition to fixed-wing and fly to the specified takeoff location. + Hover straight up to specified altitude, transition to fixed-wing and fly to the specified takeoff location. .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].param2.label, Transition Heading - Transition Heading + Transition Heading .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].param2.enumStrings, Default,Next waypoint,Takeoff,Specified,Any - Default,Next waypoint,Takeoff,Specified,Any + Default,Next waypoint,Takeoff,Specified,Any .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].friendlyName, @@ -620,25 +379,25 @@ .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].description, Fly to specified location at current altitude, transition to multi-rotor and land. - Fly to specified location at current altitude, transition to multi-rotor and land. + Fly to specified location at current altitude, transition to multi-rotor and land. .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].param3.label, Approach Alt - Approach Alt + Approach Alt .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].friendlyName, Guided enable - Guided enable + Guided enable .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].description, Enable/Disabled guided mode. - Enable/Disabled guided mode. + Enable/Disabled guided mode. .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].param1.label, .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].param1.label, .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].param2.label, @@ -692,43 +451,43 @@ .mavCmdInfo[MAV_CMD_CONDITION_DELAY].description, Delay the mission for the number of seconds. - Delay the mission for the number of seconds. + Delay the mission for the number of seconds. .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].friendlyName, Wait for altitude - Wait for altitude + Wait for altitude .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].description, Delay the mission until the specified altitide is reached. - Delay the mission until the specified altitide is reached. + Delay the mission until the specified altitide is reached. .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].category, .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].category, .mavCmdInfo[MAV_CMD_CONDITION_YAW].category, .mavCmdInfo[MAV_CMD_CONDITION_GATE].category, Conditionals - Conditionals + Conditionals .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].param1.label, .mavCmdInfo[MAV_CMD_CONDITION_YAW].param2.label, Rate - Rate + Rate .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].friendlyName, Wait for distance - Wait for distance + Wait for distance .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].description, Delay the mission until within the specified distance of the next waypoint. - Delay the mission until within the specified distance of the next waypoint. + Delay the mission until within the specified distance of the next waypoint. .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param1.label, @@ -740,13 +499,13 @@ .mavCmdInfo[MAV_CMD_CONDITION_YAW].friendlyName, Wait for Yaw - Wait for Yaw + Wait for Yaw .mavCmdInfo[MAV_CMD_CONDITION_YAW].description, Delay the mission until the specified heading is reached. - Delay the mission until the specified heading is reached. + Delay the mission until the specified heading is reached. .mavCmdInfo[MAV_CMD_CONDITION_YAW].param1.label, @@ -776,7 +535,7 @@ .mavCmdInfo[MAV_CMD_CONDITION_YAW].param4.enumStrings, .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param4.enumStrings, Relative,Absolute - Relative,Absolute + Relative,Absolute .mavCmdInfo[MAV_CMD_DO_SET_MODE].friendlyName, @@ -788,13 +547,13 @@ .mavCmdInfo[MAV_CMD_DO_SET_MODE].friendlyName, Set flight mode - Set flight mode + Set flight mode .mavCmdInfo[MAV_CMD_DO_SET_MODE].description, Set flight mode. - Set flight mode. + Set flight mode. .mavCmdInfo[MAV_CMD_DO_SET_MODE].param2.label, @@ -806,25 +565,25 @@ .mavCmdInfo[MAV_CMD_DO_SET_MODE].param3.label, Sub Mode - Sub Mode + Sub Mode .mavCmdInfo[MAV_CMD_DO_JUMP].friendlyName, Jump to item - Jump to item + Jump to item .mavCmdInfo[MAV_CMD_DO_JUMP].description, Mission will continue at the specified item. - Mission will continue at the specified item. + Mission will continue at the specified item. .mavCmdInfo[MAV_CMD_DO_JUMP].param1.label, Item # - Item # + Item # .mavCmdInfo[MAV_CMD_DO_JUMP].param2.label, @@ -842,7 +601,7 @@ .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].description, Change speed and/or throttle set points. - Change speed and/or throttle set points. + Change speed and/or throttle set points. .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param1.label, @@ -872,43 +631,43 @@ .mavCmdInfo[MAV_CMD_DO_SET_HOME].friendlyName, Set launch location - Set launch location + Set launch location .mavCmdInfo[MAV_CMD_DO_SET_HOME].description, Changes the launch location either to the current location or a specified location. - Changes the launch location either to the current location or a specified location. + Changes the launch location either to the current location or a specified location. .mavCmdInfo[MAV_CMD_DO_SET_HOME].param1.enumStrings, Vehicle position,Specified position - Vehicle position,Specified position + Vehicle position,Specified position .mavCmdInfo[MAV_CMD_DO_SET_PARAMETER].friendlyName, Set Parameter - Set Parameter + Set Parameter .mavCmdInfo[MAV_CMD_DO_SET_RELAY].friendlyName, Set relay - Set relay + Set relay .mavCmdInfo[MAV_CMD_DO_SET_RELAY].description, Set relay to a condition. - Set relay to a condition. + Set relay to a condition. .mavCmdInfo[MAV_CMD_DO_SET_RELAY].param1.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].param1.label, Relay # - Relay # + Relay # .mavCmdInfo[MAV_CMD_DO_SET_RELAY].param2.label, @@ -920,19 +679,19 @@ .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].friendlyName, Cycle relay - Cycle relay + Cycle relay .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].description, Cycle relay on/off for desired cycles/time. - Cycle relay on/off for desired cycles/time. + Cycle relay on/off for desired cycles/time. .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].param2.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param3.label, Cycles - Cycles + Cycles .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].param3.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param4.label, @@ -944,13 +703,13 @@ .mavCmdInfo[MAV_CMD_DO_SET_SERVO].friendlyName, Set servo - Set servo + Set servo .mavCmdInfo[MAV_CMD_DO_SET_SERVO].description, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].description, Set servo to specified PWM value. - Set servo to specified PWM value. + Set servo to specified PWM value. .mavCmdInfo[MAV_CMD_DO_SET_SERVO].param1.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param1.label, @@ -968,7 +727,7 @@ .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].friendlyName, Cycle servo - Cycle servo + Cycle servo .mavCmdInfo[MAV_CMD_DO_SET_ACTUATOR].friendlyName, @@ -1010,7 +769,7 @@ .mavCmdInfo[MAV_CMD_DO_FLIGHTTERMINATION].friendlyName, Flight termination - Flight termination + Flight termination .mavCmdInfo[MAV_CMD_DO_LAND_START].friendlyName, @@ -1022,49 +781,49 @@ .mavCmdInfo[MAV_CMD_DO_LAND_START].description, Marker to indicate start of landing sequence. - Marker to indicate start of landing sequence. + Marker to indicate start of landing sequence. .mavCmdInfo[MAV_CMD_DO_RALLY_LAND].friendlyName, Rally land - Rally land + Rally land .mavCmdInfo[MAV_CMD_DO_GO_AROUND].friendlyName, Go around - Go around + Go around .mavCmdInfo[MAV_CMD_DO_REPOSITION].friendlyName, Reposition - Reposition + Reposition .mavCmdInfo[MAV_CMD_DO_PAUSE_CONTINUE].friendlyName, Pause/Continue - Pause/Continue + Pause/Continue .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].friendlyName, Set moving direction - Set moving direction + Set moving direction .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].description, Set moving direction to forward or reverse. - Set moving direction to forward or reverse. + Set moving direction to forward or reverse. .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].param1.enumStrings, Forward,Reverse - Forward,Reverse + Forward,Reverse .mavCmdInfo[MAV_CMD_DO_SET_ROI_LOCATION].friendlyName, @@ -1076,7 +835,7 @@ .mavCmdInfo[MAV_CMD_DO_SET_ROI_LOCATION].description, .mavCmdInfo[MAV_CMD_DO_SET_ROI].description, Sets the region of interest for cameras. - Sets the region of interest for cameras. + Sets the region of interest for cameras. .mavCmdInfo[MAV_CMD_DO_SET_ROI_LOCATION].category, .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].category, .mavCmdInfo[MAV_CMD_DO_SET_ROI_NONE].category, .mavCmdInfo[MAV_CMD_DO_SET_ROI].category, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].category, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].category, .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].category, .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].category, .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].category, .mavCmdInfo[MAV_CMD_IMAGE_STOP_CAPTURE].category, .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].category, .mavCmdInfo[MAV_CMD_VIDEO_STOP_CAPTURE].category, @@ -1094,7 +853,7 @@ .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].description, Sets the region of interest to point towards the next waypoint with optional offsets. - Sets the region of interest to point towards the next waypoint with optional offsets. + Sets the region of interest to point towards the next waypoint with optional offsets. .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].param5.label, @@ -1124,25 +883,25 @@ .mavCmdInfo[MAV_CMD_DO_SET_ROI_NONE].description, Cancels the region of interest. - Cancels the region of interest. + Cancels the region of interest. .mavCmdInfo[MAV_CMD_DO_CONTROL_VIDEO].friendlyName, Control video - Control video + Control video .mavCmdInfo[MAV_CMD_DO_SET_ROI].friendlyName, Region of interest - Region of interest + Region of interest .mavCmdInfo[MAV_CMD_DO_SET_ROI].param1.enumStrings, None,Next waypoint,Mission item,Location,ROI item - None,Next waypoint,Mission item,Location,ROI item + None,Next waypoint,Mission item,Location,ROI item .mavCmdInfo[MAV_CMD_DO_SET_ROI].param2.label, @@ -1154,7 +913,7 @@ .mavCmdInfo[MAV_CMD_DO_SET_ROI].param3.label, ROI Index - ROI Index + ROI Index .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].friendlyName, @@ -1166,7 +925,7 @@ .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].description, Configure onboard camera controller. - Configure onboard camera controller. + Configure onboard camera controller. .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param2.label, @@ -1178,7 +937,7 @@ .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param3.label, Aperture - Aperture + Aperture .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param4.label, @@ -1190,7 +949,7 @@ .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param5.label, Exposure - Exposure + Exposure .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param6.label, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param5.label, @@ -1202,19 +961,19 @@ .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param7.label, Cut off - Cut off + Cut off .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].friendlyName, Camera control - Camera control + Camera control .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].description, Control onboard camera. - Control onboard camera. + Control onboard camera. .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param1.label, @@ -1238,7 +997,7 @@ .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param4.label, Focus lock - Focus lock + Focus lock .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param6.label, @@ -1250,25 +1009,25 @@ .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].friendlyName, Configure Mount - Configure Mount + Configure Mount .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].description, Configure the vehicle mount (e.g. gimbal). - Configure the vehicle mount (e.g. gimbal). + Configure the vehicle mount (e.g. gimbal). .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param1.enumStrings, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param7.enumStrings, Retract,Neutral,Mavlink Targeting,RC Targeting,GPS Point - Retract,Neutral,Mavlink Targeting,RC Targeting,GPS Point + Retract,Neutral,Mavlink Targeting,RC Targeting,GPS Point .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param2.label, Stabilize Roll - Stabilize Roll + Stabilize Roll .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param2.enumStrings, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param3.enumStrings, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param4.enumStrings, @@ -1280,43 +1039,43 @@ .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param3.label, Stabilize Pitch - Stabilize Pitch + Stabilize Pitch .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param4.label, Stabilize Yaw - Stabilize Yaw + Stabilize Yaw .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].friendlyName, Control Mount - Control Mount + Control Mount .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].description, Control the vehicle mount (e.g. gimbal). - Control the vehicle mount (e.g. gimbal). + Control the vehicle mount (e.g. gimbal). .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param1.label, Lat/Pitch - Lat/Pitch + Lat/Pitch .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param2.label, Lon/Roll - Lon/Roll + Lon/Roll .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param3.label, Alt/Yaw - Alt/Yaw + Alt/Yaw .mavCmdInfo[MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW].friendlyName, @@ -1376,13 +1135,13 @@ .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].friendlyName, Camera trigger distance - Camera trigger distance + Camera trigger distance .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].description, Set camera trigger distance. - Set camera trigger distance. + Set camera trigger distance. .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param2.label, @@ -1400,19 +1159,19 @@ .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param3.enumStrings, No Trigger,Once Immediately - No Trigger,Once Immediately + No Trigger,Once Immediately .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].friendlyName, Enable geofence - Enable geofence + Enable geofence .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].description, .mavCmdInfo[MAV_CMD_DO_PARACHUTE].description, Enable/Disable geofence. - Enable/Disable geofence. + Enable/Disable geofence. .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].category, .mavCmdInfo[MAV_CMD_DO_PARACHUTE].category, @@ -1424,19 +1183,19 @@ .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].param1.enumStrings, Disable,Disable floor only,Enable - Disable,Disable floor only,Enable + Disable,Disable floor only,Enable .mavCmdInfo[MAV_CMD_DO_PARACHUTE].friendlyName, Trigger parachute - Trigger parachute + Trigger parachute .mavCmdInfo[MAV_CMD_DO_PARACHUTE].param1.enumStrings, Disable,Enable,Release - Disable,Enable,Release + Disable,Enable,Release .mavCmdInfo[MAV_CMD_DO_MOTOR_TEST].friendlyName, @@ -1448,13 +1207,13 @@ .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].friendlyName, Inverted flight - Inverted flight + Inverted flight .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].description, Change to/from inverted flight. - Change to/from inverted flight. + Change to/from inverted flight. .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].param1.label, @@ -1466,7 +1225,7 @@ .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].param1.enumStrings, Normal,Inverted - Normal,Inverted + Normal,Inverted .mavCmdInfo[MAV_CMD_DO_GRIPPER].friendlyName, @@ -1484,73 +1243,73 @@ .mavCmdInfo[MAV_CMD_DO_GRIPPER].param1.label, Gripper id - Gripper id + Gripper id .mavCmdInfo[MAV_CMD_DO_GRIPPER].param2.label, Action - Action + Action .mavCmdInfo[MAV_CMD_DO_GRIPPER].param2.enumStrings, Release,Grab - Release,Grab + Release,Grab .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].friendlyName, AutoTune Enable - AutoTune Enable + AutoTune Enable .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].description, AutoTune Enable. - AutoTune Enable. + AutoTune Enable. .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].param2.enumStrings, Enable,Disable - Enable,Disable + Enable,Disable .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].friendlyName, Guided limits - Guided limits + Guided limits .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].description, Set limits for external control - Set limits for external control + Set limits for external control .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param1.label, Timeout - Timeout + Timeout .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param2.label, Min Alt - Min Alt + Min Alt .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param3.label, Max Alt - Max Alt + Max Alt .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param4.label, H Limit - H Limit + H Limit .mavCmdInfo[MAV_CMD_PREFLIGHT_CALIBRATION].friendlyName, @@ -1562,7 +1321,7 @@ .mavCmdInfo[MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS].friendlyName, Set sensor offsets - Set sensor offsets + Set sensor offsets .mavCmdInfo[MAV_CMD_PREFLIGHT_UAVCAN].friendlyName, @@ -1574,19 +1333,19 @@ .mavCmdInfo[MAV_CMD_PREFLIGHT_STORAGE].friendlyName, Store parameters - Store parameters + Store parameters .mavCmdInfo[MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN].friendlyName, Reboot/Shutdown vehicle - Reboot/Shutdown vehicle + Reboot/Shutdown vehicle .mavCmdInfo[MAV_CMD_OVERRIDE_GOTO].friendlyName, Override goto - Override goto + Override goto .mavCmdInfo[MAV_CMD_MISSION_START].friendlyName, @@ -1604,67 +1363,67 @@ .mavCmdInfo[MAV_CMD_GET_HOME_POSITION].friendlyName, Get launch position - Get launch position + Get launch position .mavCmdInfo[MAV_CMD_START_RX_PAIR].friendlyName, Bind Spektrum receiver - Bind Spektrum receiver + Bind Spektrum receiver .mavCmdInfo[MAV_CMD_GET_MESSAGE_INTERVAL].friendlyName, Get message interval - Get message interval + Get message interval .mavCmdInfo[MAV_CMD_SET_MESSAGE_INTERVAL].friendlyName, Set message interval - Set message interval + Set message interval .mavCmdInfo[MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES].friendlyName, Get capabilities - Get capabilities + Get capabilities .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].friendlyName, Set camera modes - Set camera modes + Set camera modes .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].description, Set camera photo, video modes. - Set camera photo, video modes. + Set camera photo, video modes. .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].param2.enumStrings, Take photos,Record video,Survey photo mode - Take photos,Record video,Survey photo mode + Take photos,Record video,Survey photo mode .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].friendlyName, Start image capture - Start image capture + Start image capture .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].description, Start taking one or more photos. - Start taking one or more photos. + Start taking one or more photos. .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].param2.label, Interval - Interval + Interval .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].param3.label, @@ -1676,7 +1435,7 @@ .mavCmdInfo[MAV_CMD_IMAGE_STOP_CAPTURE].friendlyName, Stop image capture - Stop image capture + Stop image capture .mavCmdInfo[MAV_CMD_IMAGE_STOP_CAPTURE].description, @@ -1688,7 +1447,7 @@ .mavCmdInfo[MAV_CMD_DO_TRIGGER_CONTROL].friendlyName, Trigger control - Trigger control + Trigger control .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].friendlyName, @@ -1706,7 +1465,7 @@ .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].param2.label, Status Frequency - Status Frequency + Status Frequency .mavCmdInfo[MAV_CMD_VIDEO_STOP_CAPTURE].friendlyName, @@ -1724,7 +1483,7 @@ .mavCmdInfo[MAV_CMD_CONTROL_HIGH_LATENCY].friendlyName, Control high latency link - Control high latency link + Control high latency link .mavCmdInfo[MAV_CMD_PANORAMA_CREATE].friendlyName, @@ -1742,7 +1501,7 @@ .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].description, Perform flight mode transition. - Perform flight mode transition. + Perform flight mode transition. .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].category, @@ -1754,43 +1513,61 @@ .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].param1.enumStrings, Multi Rotor,Fixed Wing - Multi Rotor,Fixed Wing + Multi Rotor,Fixed Wing .mavCmdInfo[MAV_CMD_CONDITION_GATE].friendlyName, Condition Gate - Condition Gate + Condition Gate .mavCmdInfo[MAV_CMD_CONDITION_GATE].description, Delay mission state machine until gate has been reached. - Delay mission state machine until gate has been reached. + Delay mission state machine until gate has been reached. .mavCmdInfo[MAV_CMD_CONDITION_GATE].param2.label, Ignore Alt - Ignore Alt + Ignore Alt .mavCmdInfo[MAV_CMD_CONDITION_GATE].param2.enumStrings, False,True - False,True + False,True .mavCmdInfo[MAV_CMD_PAYLOAD_PREPARE_DEPLOY].friendlyName, Payload prepare deploy - Payload prepare deploy + Payload prepare deploy .mavCmdInfo[MAV_CMD_PAYLOAD_CONTROL_DEPLOY].friendlyName, Payload control deploy - Payload control deploy + Payload control deploy + + + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + 요 + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + 피치 @@ -1799,13 +1576,230 @@ .QGC.MetaData.Facts[CameraAction].enumStrings, No change,Take photo,Take photos (time),Take photos (distance),Stop taking photos,Start recording video,Stop recording video - No change,Take photo,Take photos (time),Take photos (distance),Stop taking photos,Start recording video,Stop recording video + No change,Take photo,Take photos (time),Take photos (distance),Stop taking photos,Start recording video,Stop recording video .QGC.MetaData.Facts[CameraMode].enumStrings, Photo,Video,Survey - Photo,Video,Survey + Photo,Video,Survey + + + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + 북쪽,남쪽 + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + N/A,모든 비행 시스템,추진체,전자,임무장비 + + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + N/A,리포,리페,리온,니켈수소 + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + N/A,확인,부족,심각,비상,실패,위험,충전중 + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + 사용 안 함,사용 + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + 사용 안 함,사용,사용 불가 + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + 아두파일럿,PX4 프로,일반 Mavlink 장치 + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + 실내,실외 + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + 하지 않음,항상 실행,Follow Me 모드에서만 실행 + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + 기본,소프트웨어 디코더 강제,NVIDIA 디코더 강제,VA-API 디코더 강제,DirectX3D 11 디코더 강제,VideoToolbox 디코더 강제 + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz @@ -1814,13 +1808,13 @@ .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].description, Take off from the ground and ascend to specified altitude. - Take off from the ground and ascend to specified altitude. + Take off from the ground and ascend to specified altitude. .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].description, Takeoff to specified altitude. - Takeoff to specified altitude. + Takeoff to specified altitude. .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].category, .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].category, @@ -1832,7 +1826,7 @@ .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].description, Land using VTOL mode. - Land using VTOL mode. + Land using VTOL mode. .mavCmdInfo[MAV_CMD_DO_SET_RELAY].param2.label, diff --git a/translations/qgc_json_nl_NL.ts b/translations/qgc_json_nl_NL.ts index a5c488d2798..7bfe0ef222a 100644 --- a/translations/qgc_json_nl_NL.ts +++ b/translations/qgc_json_nl_NL.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_no_NO.ts b/translations/qgc_json_no_NO.ts index 0471071d5ed..559329a4b10 100644 --- a/translations/qgc_json_no_NO.ts +++ b/translations/qgc_json_no_NO.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_pl_PL.ts b/translations/qgc_json_pl_PL.ts index 36ab0c73a40..c2990b546c1 100644 --- a/translations/qgc_json_pl_PL.ts +++ b/translations/qgc_json_pl_PL.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_pt_PT.ts b/translations/qgc_json_pt_PT.ts index 9bf033c23de..3d5f994ae6c 100644 --- a/translations/qgc_json_pt_PT.ts +++ b/translations/qgc_json_pt_PT.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro, Mavlink Genérico - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Asas Fixas,Multi-Rotor,VTOL,Rover,Sub,Mavlink Genérico - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Desativado,Erro,Aviso,Corrigir,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Interior,exterior - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Nunca,Sempre,Quando no modo de voo Siga-me - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicóptero,Avião,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlado por Veículo,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Ocultar,Mostrar - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Ajuste de Largura,Ajuste de Altura,Alongar - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Padrão,Forçar decodificador de software,Forçar decodificador NVIDIA,Forçar decodificador VA-API,Forçar decodificador DirectX3D 11,Forçar decodificador VideoToolbox - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,Todos os Sistemas de Voo,Propulsão,Aviônica,Carga - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Baixo,Crítico,Emergência,Falhou,Doente,Carregando - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (flutuante),3D RTK GPS Lock (fixo),Estático (fixo) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Desativado,Ativado - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Desativado,Ativado,Indisponível - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - Norte,Sul - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Guinada - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Arfagem - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Configurações do lançamento da carga + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Guinada + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Arfagem + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Foto,Vídeo,Pesquisa + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + Norte,Sul + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,Todos os Sistemas de Voo,Propulsão,Aviônica,Carga + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Baixo,Crítico,Emergência,Falhou,Doente,Carregando + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (flutuante),3D RTK GPS Lock (fixo),Estático (fixo) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Desativado,Ativado + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Desativado,Ativado,Indisponível + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicóptero,Avião,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro, Mavlink Genérico + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Asas Fixas,Multi-Rotor,VTOL,Rover,Sub,Mavlink Genérico + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Desativado,Erro,Aviso,Corrigir,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Interior,exterior + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Nunca,Sempre,Quando no modo de voo Siga-me + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Padrão,Forçar decodificador de software,Forçar decodificador NVIDIA,Forçar decodificador VA-API,Forçar decodificador DirectX3D 11,Forçar decodificador VideoToolbox + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlado por Veículo,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_ru_RU.ts b/translations/qgc_json_ru_RU.ts index aa0ccfafdcc..2e46a9ebaa6 100644 --- a/translations/qgc_json_ru_RU.ts +++ b/translations/qgc_json_ru_RU.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_sv_SE.ts b/translations/qgc_json_sv_SE.ts index d684e54860c..29629d94d9f 100644 --- a/translations/qgc_json_sv_SE.ts +++ b/translations/qgc_json_sv_SE.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_tr_TR.ts b/translations/qgc_json_tr_TR.ts index c4d2de22fdd..870175c6591 100644 --- a/translations/qgc_json_tr_TR.ts +++ b/translations/qgc_json_tr_TR.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_uk_UA.ts b/translations/qgc_json_uk_UA.ts index fcdb7255b91..ca105520e70 100644 --- a/translations/qgc_json_uk_UA.ts +++ b/translations/qgc_json_uk_UA.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_zh_CN.ts b/translations/qgc_json_zh_CN.ts index 66f4f85449b..393c10e6258 100644 --- a/translations/qgc_json_zh_CN.ts +++ b/translations/qgc_json_zh_CN.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink 通用 - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - 室内,室外 - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - 从不,总是,处于“跟随我”飞行模式时 - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - 多机器人,直升机,固定翼,旋翼,水下装置 - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - 由无人机控制,0 赫兹,1 赫兹,2 赫兹,3 赫兹,4 赫兹,5 赫兹,6 赫兹,7 赫兹,8 赫兹,9 赫兹,10 赫兹,50 赫兹,100 赫兹 - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - 隐藏,显示 - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - 适合宽度,适合高度,拉伸数 - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - 无,无,2D锁定,3D锁定,3D DGPS锁定,3D RTK GPS 锁定（浮动）,3D RTK GPS锁定（固定）,静态（固定） - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - 禁用,启用 - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - 禁用,启用,不可用 - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - 北,南 - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ 载荷控制部署 + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ 照片，视频，调查 + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + 北,南 + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + 无,无,2D锁定,3D锁定,3D DGPS锁定,3D RTK GPS 锁定（浮动）,3D RTK GPS锁定（固定）,静态（固定） + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + 禁用,启用 + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + 禁用,启用,不可用 + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + 多机器人,直升机,固定翼,旋翼,水下装置 + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink 通用 + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + 室内,室外 + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + 从不,总是,处于“跟随我”飞行模式时 + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + 由无人机控制,0 赫兹,1 赫兹,2 赫兹,3 赫兹,4 赫兹,5 赫兹,6 赫兹,7 赫兹,8 赫兹,9 赫兹,10 赫兹,50 赫兹,100 赫兹 + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_json_zh_TW.ts b/translations/qgc_json_zh_TW.ts index 7c6112fe38d..2957dda2f42 100644 --- a/translations/qgc_json_zh_TW.ts +++ b/translations/qgc_json_zh_TW.ts @@ -1,246 +1,6 @@ - - FlyView.SettingsGroup.json - - .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, - - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - Integrated Compass/Attitude,Horizontal Compass/Atttitude,Large Vertical - - - - App.SettingsGroup.json - - .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, - - ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic - - - .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, - - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic - - - .QGC.MetaData.Facts[gstDebugLevel].enumStrings, - - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace - - - .QGC.MetaData.Facts[indoorPalette].enumStrings, - - Indoor,Outdoor - Indoor,Outdoor - - - .QGC.MetaData.Facts[followTarget].enumStrings, - - Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode - - - - FirmwareUpgrade.SettingsGroup.json - - .QGC.MetaData.Facts[apmChibiOS].enumStrings, - - ChibiOS,NuttX - ChibiOS,NuttX - - - .QGC.MetaData.Facts[apmVehicleType].enumStrings, - - Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub - - - - APMMavlinkStreamRate.SettingsGroup.json - - .QGC.MetaData.Defines.StreamRateEnumStrings, - - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - - - - BatteryIndicator.SettingsGroup.json - - .QGC.MetaData.Facts[display].enumStrings, - - Percentage,Voltage,Percentage and Voltage - Percentage,Voltage,Percentage and Voltage - - - - Video.SettingsGroup.json - - .QGC.MetaData.Facts[gridLines].enumStrings, - - Hide,Show - Hide,Show - - - .QGC.MetaData.Facts[videoFit].enumStrings, - - Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch - - - .QGC.MetaData.Facts[recordingFormat].enumStrings, - - mkv,mov,mp4 - mkv,mov,mp4 - - - .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, - - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder - - - - RemoteID.SettingsGroup.json - - .QGC.MetaData.Facts[operatorIDType].enumStrings, - - CAA - CAA - - - .QGC.MetaData.Facts[selfIDType].enumStrings, - - Free Text,Emergency,Extended Status - Free Text,Emergency,Extended Status - - - .QGC.MetaData.Facts[basicIDType].enumStrings, - - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - None,SerialNumber(ANSI/CTA-2063),CAA,UTM(RFC4122),Specific - - - .QGC.MetaData.Facts[basicIDUaType].enumStrings, - - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other - - - .QGC.MetaData.Facts[region].enumStrings, - - FAA,EU - FAA,EU - - - .QGC.MetaData.Facts[locationType].enumStrings, - - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) - - - .QGC.MetaData.Facts[classificationType].enumStrings, - - Undefined,EU - Undefined,EU - - - .QGC.MetaData.Facts[categoryEU].enumStrings, - - Undeclared,Open,Specific,Certified - Undeclared,Open,Specific,Certified - - - .QGC.MetaData.Facts[classEU].enumStrings, - - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 - - - - GimbalController.SettingsGroup.json - - .QGC.MetaData.Facts[ControlType].enumStrings, - - Click to point, click and drag - Click to point, click and drag - - - - BatteryFact.json - - .QGC.MetaData.Facts[batteryFunction].enumStrings, - - n/a,All Flight Systems,Propulsion,Avionics,Payload - n/a,All Flight Systems,Propulsion,Avionics,Payload - - - .QGC.MetaData.Facts[batteryType].enumStrings, - - n/a,LIPO,LIFE,LION,NIMH - n/a,LIPO,LIFE,LION,NIMH - - - .QGC.MetaData.Facts[chargeState].enumStrings, - - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging - - - - GPSFact.json - - .QGC.MetaData.Facts[lock].enumStrings, - - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) - - - - SubmarineFact.json - - .QGC.MetaData.Facts[inputHold].enumStrings, - - Disabled,Enabled - Disabled,Enabled - - - .QGC.MetaData.Facts[rollPitchToggle].enumStrings, - - Disabled,Enabled,Unavailable - Disabled,Enabled,Unavailable - - - - EditPositionDialog.FactMetaData.json - - .QGC.MetaData.Facts[Hemisphere].enumStrings, - - North,South - North,South - - - - MavCmdInfoMultiRotor.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, - - Yaw - Yaw - - - - MavCmdInfoFixedWing.json - - .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, - - Pitch - Pitch - - MavCmdInfoCommon.json @@ -1792,6 +1552,24 @@ Payload control deploy + + MavCmdInfoMultiRotor.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, + + Yaw + Yaw + + + + MavCmdInfoFixedWing.json + + .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, + + Pitch + Pitch + + CameraSection.FactMetaData.json @@ -1807,6 +1585,222 @@ Photo,Video,Survey + + EditPositionDialog.FactMetaData.json + + .QGC.MetaData.Facts[Hemisphere].enumStrings, + + North,South + North,South + + + + BatteryFact.json + + .QGC.MetaData.Facts[batteryFunction].enumStrings, + + n/a,All Flight Systems,Propulsion,Avionics,Payload + n/a,All Flight Systems,Propulsion,Avionics,Payload + + + .QGC.MetaData.Facts[batteryType].enumStrings, + + n/a,LIPO,LIFE,LION,NIMH + n/a,LIPO,LIFE,LION,NIMH + + + .QGC.MetaData.Facts[chargeState].enumStrings, + + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + n/a,Ok,Low,Critical,Emergency,Failed,Unhealthy,Charging + + + + GPSFact.json + + .QGC.MetaData.Facts[lock].enumStrings, + + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + None,None,2D Lock,3D Lock,3D DGPS Lock,3D RTK GPS Lock (float),3D RTK GPS Lock (fixed),Static (fixed) + + + + SubmarineFact.json + + .QGC.MetaData.Facts[inputHold].enumStrings, + + Disabled,Enabled + Disabled,Enabled + + + .QGC.MetaData.Facts[rollPitchToggle].enumStrings, + + Disabled,Enabled,Unavailable + Disabled,Enabled,Unavailable + + + + FlyView.SettingsGroup.json + + .QGC.MetaData.Facts[instrumentQmlFile].enumStrings, + + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + Integrated Compass/Attitude,Horizontal Compass/Attitude,Large Vertical + + + + RemoteID.SettingsGroup.json + + .QGC.MetaData.Facts[operatorIDType].enumStrings, + + CAA + CAA + + + .QGC.MetaData.Facts[selfIDType].enumStrings, + + Flight Purpose,Emergency,Extended Status + Flight Purpose,Emergency,Extended Status + + + .QGC.MetaData.Facts[basicIDType].enumStrings, + + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + None,SerialNumber (ANSI/CTA-2063),CAA,UTM (RFC4122),Specific + + + .QGC.MetaData.Facts[basicIDUaType].enumStrings, + + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + Undefined,Airplane/FixedWing,Helicopter/Multirrotor,Gyroplane,VTOL,Ornithopter,Glider,Kite,Free Ballon,Captive Ballon,Airship,Parachute,Rocket,Tethered powered aircraft,Ground Obstacle,Other + + + .QGC.MetaData.Facts[region].enumStrings, + + FAA,EU + FAA,EU + + + .QGC.MetaData.Facts[locationType].enumStrings, + + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + Takeoff(Not Supported),Live GNNS, Fixed (not for FAA) + + + .QGC.MetaData.Facts[classificationType].enumStrings, + + Undeclared,EU + Undeclared,EU + + + .QGC.MetaData.Facts[categoryEU].enumStrings, + + Undeclared,Open,Specific,Certified + Undeclared,Open,Specific,Certified + + + .QGC.MetaData.Facts[classEU].enumStrings, + + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + Undeclared,Class 0,Class 1,Class 2,Class 3,Class 4,Class 5,Class 6 + + + + FirmwareUpgrade.SettingsGroup.json + + .QGC.MetaData.Facts[apmChibiOS].enumStrings, + + ChibiOS,NuttX + ChibiOS,NuttX + + + .QGC.MetaData.Facts[apmVehicleType].enumStrings, + + Multi-Rotor,Helicopter,Plane,Rover,Sub + Multi-Rotor,Helicopter,Plane,Rover,Sub + + + + App.SettingsGroup.json + + .QGC.MetaData.Facts[offlineEditingFirmwareClass].enumStrings, + + ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic + + + .QGC.MetaData.Facts[offlineEditingVehicleClass].enumStrings, + + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + Fixed Wing,Multi-Rotor,VTOL,Rover,Sub,Mavlink Generic + + + .QGC.MetaData.Facts[gstDebugLevel].enumStrings, + + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + Disabled,Error,Warning,FixMe,Info,Debug,Log,Trace + + + .QGC.MetaData.Facts[indoorPalette].enumStrings, + + Indoor,Outdoor + Indoor,Outdoor + + + .QGC.MetaData.Facts[followTarget].enumStrings, + + Never,Always,When in Follow Me Flight Mode + Never,Always,When in Follow Me Flight Mode + + + + BatteryIndicator.SettingsGroup.json + + .QGC.MetaData.Facts[valueDisplay].enumStrings, + + Percentage,Voltage,Percentage and Voltage + Percentage,Voltage,Percentage and Voltage + + + + GimbalController.SettingsGroup.json + + .QGC.MetaData.Facts[ControlType].enumStrings, + + Click to point, click and drag + Click to point, click and drag + + + + Video.SettingsGroup.json + + .QGC.MetaData.Facts[videoFit].enumStrings, + + Fit Width,Fit Height,Fill,No Crop + Fit Width,Fit Height,Fill,No Crop + + + .QGC.MetaData.Facts[recordingFormat].enumStrings, + + mkv,mov,mp4 + mkv,mov,mp4 + + + .QGC.MetaData.Facts[forceVideoDecoder].enumStrings, + + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + Default,Force software decoder,Force NVIDIA decoder,Force VA-API decoder,Force DirectX3D 11 decoder,Force VideoToolbox decoder + + + + APMMavlinkStreamRate.SettingsGroup.json + + .QGC.MetaData.Defines.StreamRateEnumStrings, + + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + + APM-MavCmdInfoCommon.json diff --git a/translations/qgc_source_az_AZ.ts b/translations/qgc_source_az_AZ.ts index c6d286ef6e0..88df24d8b4d 100644 --- a/translations/qgc_source_az_AZ.ts +++ b/translations/qgc_source_az_AZ.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Xətası: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 XƏBƏRDARLIQ: İstifadə etdiyiniz uçuş lövhəsində uçuşa qarşı tövsiyə edən kritik bir xidmət bülleteni var. Əlavə məlumat üçün: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Solo video linki quraşdırması zamanı xəta baş verdi: %1 - + Unable to change altitude, vehicle altitude not known. Yüksəkliyi dəyişdirmək mümkün deyil, aparat yüksəkliyi məlum deyil. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Aparat idarəolunan qalxışı dəstəkləmir - + Unable to takeoff, vehicle position not known. Qalxış mümkün olmadı, aparatın mövqeyi məlum deyil. - + Unable to takeoff: Vehicle failed to change to Guided mode. Qalxış mümkün olmadı: Aparatın İdarəolunan rejimə keçidi uğursuz oldu. - + Unable to takeoff: Vehicle failed to arm. Qalxış mümkün olmadı:Aparatın başladılması uğursuz oldu. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Tapşırığın başlaması mümkün olmadı: Aparatın Avto rejimə keçidi uğursuz oldu. - + Unable to start mission: Vehicle failed to change to Guided mode. Tapşırığın başlaması mümkün olmadı: Aparatın İdarəolunan rejimə keçidi uğursuz oldu. - + Unable to start mission: Vehicle failed to arm. Tapşırığın başlaması mümkün olmadı: Aparatın başladılması uğursuz oldu. - - - Follow failed: Home position not set. - İzlənilmə uğursuz oldu: Ev mövqeyi təyin edilməyib. - - - - Follow failed: Ground station cannot provide required position information. - İzlənilmə uğursuz oldu: Yer stansiyası istənilən mövqe məlumatını təmin edə bilmir. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Məni İzlə + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Məni İzlə Quraşdırması yer stansiyasının yerləşdiyi yerdən sonra aparata dəstək konfiqurasiya etmək üçün istifadə olunur. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 ekran + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 tutumu + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 ekran + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 tutum + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Başlanğıca Qayıtmaq - + - + Return at current altitude Cari yüksəklikdə qayıt - + - + Return at specified altitude: Müəyyən olunmuş yüksəklikdə qayıt: @@ -1897,14 +1929,14 @@ Son yer mərtəbəsinə enmə sürəti: - - + + Arming Checks Xodlanma Yoxlanışı - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Xəbərdarlıq: Xodlanma yoxlanışını söndürmək Aparat idarəetməsinin itirilməsinə səbəb ola bilər. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Tətikçilər - + Throttle PWM threshold: Throttle PWM həddi: - + Voltage threshold: Gərginlik həddi: - + MAH threshold: MAH həddi: - + GCS failsafe GCS failsafe - + Return to Launch Başlanğıca Qayıdış - + Return at current altitude Cari yüksəkliyə qayıt - + Return at specified altitude: Spesifik yüksəkliyə qayıt: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Deaktiv Edildi - + Voltage failsafe: Gərginik failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min yüksəklik: - + current Cərəyan şiddəti @@ -3469,12 +3501,12 @@ Zəhmət olmasa aparatınızı suya qoyun, düyməni vurun və gözləyin. Diqq APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Zəhmət olmasa aparatınızı suya qoyun, düyməni vurun və gözləyin. Diqq Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Zəhmət olmasa aparatınızı suya qoyun, düyməni vurun və gözləyin. Diqq Xüsusi Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Zəhmət olmasa aparatınızı suya qoyun, düyməni vurun və gözləyin. Diqq AppLogModel - + Open console log output file failed %1 : %2 Açıq konsol giriş çıxışı faylı %1: %2 uğursuz oldu @@ -4157,17 +4189,17 @@ Zəhmət olmasa aparatınızı suya qoyun, düyməni vurun və gözləyin. Diqq Logging categories - + Search: Axtarış: - + Clear Aydındır - + Clear All Hamısını sil @@ -4245,342 +4277,706 @@ Zəhmət olmasa aparatınızı suya qoyun, düyməni vurun və gözləyin. Diqq CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Xodda + + Stabilize + Stabilize - - Disarmed - Xodda olmayan + + Acro + Acro - - Arm - Xod + + Altitude Hold + Altitude Hold - - Disarm - Xodda olmayan + + Auto + Auto - - - AudioOutput - - negative - mənfi + + Guided + Guided - - point - nöqtə + + Loiter + Loiter - - meters - sayğac + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - Bir və ya daha çox aparat komponenti uçuşdan əvvəl quraşdırma tələb edir. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Xəritədə deyil + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings - Bluetooth Bağlantı Ayarları + + Manual + Manual - - Bluetooth Not Available - Bluetooth mövcud deyil + + Acro + Acro - - - BluetoothLink - - Bluetooth Link Error - Bluetooth bağlantısı xətası + + Learning + Learning - - - BluetoothSettings - - Device + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Xodda + + + + Disarmed + Xodda olmayan + + + + Arm + Xod + + + + Disarm + Xodda olmayan + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + Bir və ya daha çox aparat komponenti uçuşdan əvvəl quraşdırma tələb edir. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Xəritədə deyil + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings + Bluetooth Bağlantı Ayarları + + + + Bluetooth Not Available + Bluetooth mövcud deyil + + + + BluetoothLink + + + Bluetooth Link Error + Bluetooth bağlantısı xətası + + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + + + + BluetoothSettings + + + Device Device @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Dayan + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Genişlik - + Height Hündürlük - + Sensor Sensor - + Image Şəkil - + Focal length Focal uzunluğu @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Ön dövrə - + Side Lap Yan dövrə - + Overlap Üst-üstə düşmək - + Select one: Birini seçin: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. Bu Pattern hafızası dəstəkləmir. - + '%1' is a built-in preset which cannot be deleted. '%1' silmək mümkün olmayan quraşdırılmış əvvəlcədən qurulmuş bir yerdir. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - bağlamaq - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Vasitə yerini təyin edin - - + + Altitude yüksəklik - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Saat yönünde loiter - + Landing point Eniş nöqtəsi - + Heading Yönəlmə - + Glide Slope Yamacın sürüşməsi - + Altitudes relative to launch Başlanğıc üçün nisbi yüksəkliklər - + Drag the loiter point to adjust landing direction for wind and obstacles. Külək və maneələr üçün eniş istiqamətini tənzimləmək üçün boşaltma nöqtəsini çəkin. - + Done Bitdi - + Camera Kamera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Təxminən sürüşmə yamacının hündürlüyü. - + * Actual flight path will vary. * Faktiki uçuş yolu dəyişəcək. - + * Avoid tailwind on landing. * Enişdə quyruqdan qaçın. - + Click in map to set landing point. Eniş nöqtəsini təyin etmək üçün xəritəyə vurun. - + - or - - və ya - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Eniş Sahəsi - + Glide Slope Yamacın sürüşməsi @@ -5797,22 +6218,9 @@ Click Ok to start the auto-tuning process. - FactSlider - - - N/A - N/A - - - - FactTextField - - - Invalid Value - Yanlış Dəyər - + FactTextField - + Value Details Dəyər təfərrüatları @@ -5869,22 +6277,22 @@ Click Ok to start the auto-tuning process. Firmware Class - + PX4 Pro PX4 Pro - + ArduPilot ArduPilot - + Generic Generic - + Unknown Unknown @@ -5994,377 +6402,8 @@ Click Ok to start the auto-tuning process. FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 - - - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 - - - - a7r III 35mm - a7r III 35mm - - - - a7r IV 35mm - a7r IV 35mm - - - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 - - - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 - - - - DSC-RX0 - DSC-RX0 - - - - Sony DSC-RX0 - Sony DSC-RX0 - - - - DSC-RX1R II 35mm - DSC-RX1R II 35mm - - - - ILCE-QX1 - ILCE-QX1 - - - - Sony ILCE-QX1 - Sony ILCE-QX1 - - - - NEX-5R 20mm - NEX-5R 20mm - - - - Sony NEX-5R 20mm - Sony NEX-5R 20mm - - - - RX100 II 28mm - RX100 II 28mm - - - - Sony RX100 II 28mm - Sony RX100 II 28mm - - - - - - - Yuneec - Yuneec - - - - CGOET - CGOET - - - - Yuneec CGOET - Yuneec CGOET - - - - E10T - E10T - - - - Yuneec E10T - Yuneec E10T - - - - E50 - E50 - - - - Yuneec E50 - Yuneec E50 - - - - E90 - E90 - - - - Yuneec E90 - Yuneec E90 - - - - - Flir - Flir - - - - Duo R - Duo R - - - - Flir Duo R - Flir Duo R - - - - Duo Pro R - Duo Pro R - - - - - Workswell - Workswell - - - - - Wiris Security - Wiris Security - - - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vasitə son dayanıqlı proqram təminatını işləmir! %1 çalışır, son sabit %2. @@ -6382,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Quraşdırması - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 Pixhawk cihazlarında, SiK Radios və PX4 Flow Smart Kameralardakı proqramı təkmilləşdirə bilər. - Update the autopilot firmware to the latest version @@ -6398,7 +6432,7 @@ Click Ok to start the auto-tuning process. Nəqliyyat vasitələri ilə əlaqələrin hamısı %1 olmalıdır - + Upgrade cancelled Yeniləmə ləğv edildi @@ -6407,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Firmware Faylını seçin + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6493,162 +6532,144 @@ Click Ok to start the auto-tuning process. Cihaz tapıldı - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standart versiya (stabil) - + Beta Testing (beta) Beta Test (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Xüsusi firmware faylı ... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standart versiya - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Aşkarlanmış PX4 Flow board. PX4 Axınında istifadə etdiyiniz firmware, aparatda istifadə etdiyiniz AutoPilot firmware tipinə uyğun olmalıdır: - - - + Detected Pixhawk board. You can select from the following flight stacks: Pixhawk lövhəsi aşkarlandı. Aşağıdakı uçuş dayaqlarından birini seçə bilərsiniz: - + Press Ok to upgrade your vehicle. Aparatınızı təkmilləşdirmək üçün Ok düyməsini basın. - + Downloading list of available firmwares... Mövcud firmware-lərin siyahısı yüklənir ... - + No Firmware Available Firmware mövcud deyil - + Advanced settings Ətraflı parametrlər - + Select the standard version or one from the file system (previously downloaded): Fayl sistemindən standart versiyanı və ya birini seçin (əvvəllər yüklənmiş): - - Select which version of the firmware you would like to install: - Quraşdırmaq istədiyiniz proqramın hansı versiyasını seçin: - - - + Select which version of the above flight stack you would like to install: Yuxarıdakı uçuş yığınının hansı versiyasını quraşdırmaq istədiyinizi seçin: - + WARNING: BETA FIRMWARE. XƏBƏRDARLIQ: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. Bu firmware versiyası yalnız beta sınayıcılar üçün nəzərdə tutulub. - + Although it has received FLIGHT TESTING, it represents actively changed code. FLIGHT TESTING almasına baxmayaraq, aktiv şəkildə dəyişdirilmiş kodu təmsil edir. - + Do NOT use for normal operation. Normal iş üçün istifadə etməyin. - + WARNING: CONTINUOUS BUILD FIRMWARE. DİQQƏT: Davamlı inşaat firmware. - + This firmware has NOT BEEN FLIGHT TESTED. Bu firmware uçuş testi edilməmişdir. - + It is only intended for DEVELOPERS. Yalnız developerlər üçün nəzərdə tutulub. - + Run bench tests without props first. Əvvəl pərvanələr olmadan dəzgah testlərini keçirin. - + Do NOT fly this without additional safety precautions. Əlavə təhlükəsizlik tədbirləri olmadan bu uçmayın. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6656,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Firmware Yeniləmə zamanı qoşulma icazə verilmir. - + Connected to bootloader: Yükləmə cihazına qoşulub: - + Version: %1 Versiya: %1 - + Board ID: %1 İdarə Heyəti ID: %1 - + Flash size: %1 Fləş ölçüsü: %1 - + Custom firmware selected but no filename given. Xüsusi proqram seçildi, lakin heç bir fayl adı verilmədi. - + Unable to find specified firmware for board type Lövhə növü üçün müəyyən edilmiş proqram təminatını tapmaq olmur - + No firmware file selected Heç bir firmware faylı seçilməyib - + Downloading firmware... Firmware yüklənir ... - + From: %1 %1 -dən - + Download complete Yükləmə tamamlandı - + Image load failed Şəkil yüklənmədi - + Bootloader not found Yükləyici tapılmadı - + Image size of %1 is too large for board flash size %2 Şəkil ölçüsü %1 board flaş ölçüsü %2 üçün çox böyükdür - + Upgrade complete Yeniləmə tamamlandı - + Upgrade cancelled Yeniləmə ləğv edildi - + Choose board type Lövhə tipini seçin @@ -6837,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 kompleks maddə versiyası %2 dəstəklənmir @@ -6845,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO VİDEO İSTƏYİR - + VIDEO DISABLED VIDEO DEAKTİV EDİLDİ @@ -6863,15 +6884,6 @@ Click Ok to start the auto-tuning process. Vəzifə göstərin - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7026,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7099,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7316,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7430,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Bölmələr @@ -7445,39 +7480,39 @@ Click Ok to start the auto-tuning process. Rəng sxemi - + Stream GCS Position Axın GCS mövqeyi - + Mute all audio output Bütün səs çıxışını səssizləşdirin - + Clear all settings on next start Növbəti başlanğıcda bütün parametrləri silin - + Application Load/Save Path Tətbiq Yükləyin / Yolu Saxla - - - + + + Browse Gözdən keçirin - + Choose the location to save/load files Faylları saxlamaq / yükləmək üçün yeri seçin - + UI Scaling UI miqyası @@ -7487,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Marka şəkli - + Indoor Image Daxili şəkil - - + + Choose custom brand image file Xüsusi marka görünüş faylı seçin - + Outdoor Image Xarici görünüş - + Reset Images Reset Images - + Reset Reset @@ -7531,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence %1 versiyasını dəstəkləyir - + GeoFence polygon not stored as object GeoFence çoxbucağı obyekt kimi saxlanılmır - + GeoFence circle not stored as object GeoFence dairəsi obyekt kimi saxlanılmır @@ -7679,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Şəkillər artıq etiketlənib. Mövcud şəkillər silinəcəkdir. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. Saxlama qovluğunda artıq şəkillər var. - + Cannot find the image directory. Şəkil kataloqunu tapa bilmir. - + Couldn't replace the previously tagged images Əvvəlcədən işarələnmiş şəkilləri əvəz edə bilmədi - + Cannot find the save directory. Saxlama qovluğunu tapa bilmədim. @@ -7707,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Yükləmı faylını seçin - + ULog file (*.ulg) ULog faylı (*.ulg) - + PX4 log file (*.px4log) PX4 giriş faylı (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Şəkil qovluğunu seçin - + (Optionally) Select save directory (İsteğe bağlı) Saxlama qovluğunu seçin @@ -7749,22 +7802,22 @@ Click Ok to start the auto-tuning process. Saxlama qovluğunu seçin - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Etiketi ləğv edin - + Start Tagging Etiketləməyə başlayın @@ -7772,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format Şəkil qovluğunda şəkillər yoxdur, şəkillərinizin JPG formatında olduğundan əmin olun - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging uğursuz oldu. Şəkil aça bilmədi. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Etiketləmə ləğv edildi - + Geotagging failed. Couldn't open log file. Geotagging uğursuz oldu. Giriş faylı aça bilmədi. - - %1 - tagging cancelled - %1 - etiketləmə ləğv edildi - - - + Log parsing failed Giriş analizi alınmadı - - Geotagging failed in trigger filtering - Geotagging filtrləmə işarəsi alınmadı - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging uğursuz oldu. Şəkli #%1 tələb edir, ancaq %2 görüntü mövcuddur. - - - Geotagging failed. Couldn't write to image. - Geotagging uğursuz oldu. Təsvirə yazıla bilmədi. - - - - Geotagging failed. Couldn't write to an image. - Geotagging uğursuz oldu. Təsvirə yazmaq olmur. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8071,7 +8131,7 @@ Click Ok to start the auto-tuning process. Yerə gedin - + Return to the launch position of the vehicle. Aparatın işə salınma vəziyyətinə qayıdın. @@ -8126,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Aparatı xoda salın. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Aparatın xodunu söndürün - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. XƏBƏRDARLIQ: BÜTÜN MOTORLARI dayandıracaq. Aparat hal-hazırda HAVADADIRSA CRASH OLACAQ. - + Takeoff from ground and hold position. Yerdən qalxın və mövqe tutun. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Yerdən qalx və cari missiyaya başla. - + Continue the mission from the current waypoint. Hazırkı nöqteyi-nəzərdən missiyanı davam etdirin. - + Upload of resume mission failed. Confirm to retry upload CV missiyası yüklənmədi. Yükləməyə yenidən cəhd etməyi təsdiqləyin - + Land the vehicle at the current position. Aparatı hazırkı vəziyyətdə yerə qoyun. - + Change the altitude of the vehicle up or down. Apararatın yüksəkliyini yuxarı və ya aşağı dəyişdirin. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Aparatı göstərilən yerə aparın. - + Adjust current waypoint to %1. Cari yol nöqtəsini %1 olaraq tənzimləyin. - + Orbit the vehicle around the specified location. Aparat göstərilən yerin ətrafında. - + Abort the landing sequence. Eniş ardıcıllığını ləğv edin. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Aparatı cari vəziyyətdə dayandırın, lazım olduqda hündürlüyü yuxarı və ya aşağı tənzimləyin. - + Pause all vehicles at their current position. Bütün aparatları hazırkı vəziyyətdə dayandırın. - + Transition VTOL to fixed wing flight. VTOL'un sabit qanad uçuşuna keçidi. - + Transition VTOL to multi-rotor flight. VTOL-un çox rotorlu uçuşa keçidi. - + Make the specified location a Region Of Interest. Göstərilən yeri maraq dairəsi halına gətirin. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Daxili səhv: bilinməyən actionCode @@ -8321,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8335,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None Heç biri - + Color Rəng - + Opacity Şəffaflıq - + Icon Nişan InstrumentValueEditDialog - - - Value Display - Qiymət Ekranı - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Nişan - + Text Mətn - + + + Label Etiket - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Ölçü - + Show Units Bölmələri göstərin - - Range - Məsafə + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Tətbiq etmək istədiyiniz rəng aralığını dəyər aralığına əsasən təyin edin Mövcud olduqda rəng simgəyə tətbiq olunacaq, əks halda dəyərin özünə aiddir. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Tətbiq etmək istədiyiniz rəng aralığını dəyər aralığına əsasən təyin edin Mövcud olduqda rəng simgəyə tətbiq olunacaq, əks halda dəyərin özünə aiddir. - - - + + + Add Row Sıra əlavə edin - + Specify the icon you want to display based on value ranges. Göstərmək istədiyiniz simvolu dəyər aralığına əsasən göstərin. - + Specify the icon opacity you want based on value ranges. İstədiyiniz nişan şəffaflığını dəyər aralığına əsasən təyin edin. - + Select Icon Nişanı seçin @@ -8443,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action Heç bir fəaliyyət - + Arm Xodla - + Disarm Xoddan sal - + Toggle Arm Toggle xodla - + VTOL: Fixed Wing VTOL: Sabit qanad - + VTOL: Multi-Rotor VTOL: Çox Rotor - + Continuous Zoom In Davamlı yaxınlaşdırma - + Continuous Zoom Out Davamlı uzaqlaşdırma - + Step Zoom In Step böyüt - + Step Zoom Out Step uzaqlaşdır - + Trigger Camera Tətiklə kameranı - + Start Recording Video Video yazmağa başlayın - + Stop Recording Video Videonu yazmağı dayandırın - + Toggle Recording Video Videonu qeyd etmə qaydasına keçin - + Gimbal Down Gimbal Aşağı - + Gimbal Up Gimbal yuxarı - + Gimbal Left Gimbal Sol - + Gimbal Right Gimbal Sağ - + Gimbal Center Gimbal Mərkəzi - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Təcili Yardım - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Sonrakı Video Axın - + Previous Video Stream Əvvəlki Video Axın - + Next Camera Sonrakı Kamera - + Previous Camera Əvvəlki kamera @@ -8759,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. %1 joystick oxları aşkarlandı. PX4 işlətmək üçün ən az%2 oxa ehtiyacınız var. @@ -8825,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick statusu - + Connected: Qoşuldu: - - + + Yes Yes - - + + No No - + Enabled: Aktiv: @@ -8935,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8948,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8961,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Qoşulmağa icazə verilmir:%1 - - - - + + + %1 on %2 (AutoConnect) %2-də%1 (AutoConnect) - + Shutdown Söndür - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Yalançı bağlantı - + AirLink AirLink - - + + Log Replay Log Təkrar @@ -9013,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Əlavə edin - + Connect Qoşulun @@ -9028,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Əlaqəni kəsin - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Avtomatik olaraq Başlanğıcda qoşun - + High Latency Yüksək gecikmə - + Type Type @@ -9122,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Mövcuddur - - + Canceled Ləğv edildi - - - + + Error Xəta - + Downloaded Yüklənib - - Timed Out - Müddəti bitdi - - - + Waiting Gözlənilir - - - UnknownDate - Naməlum tarix - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log yükləmə vasitənizdən binary log sənədlərini yükləməyinizə imkan verir. Mövcud logların siyahısını əldə etmək üçün Yeniləmə vurun. - + Id Id - + Date Tarix - + Date Unknown Tarixi Naməlum - + Size Ölçüsü - + Status Vəziyyət - + Refresh Yenilə - + Log Refresh Log Yeniləyin - + You must be connected to a vehicle in order to download logs. Logları yükləmək üçün bir aparata qoşulmalısınız. - + Download Yükləyin - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Saxlama qovluğunu seçin - + Erase All Hamısını silmək - + Delete All Log Files Bütün Giriş Fayllarını silin - + All log files will be erased permanently. Is this really what you want? Bütün giriş sənədləri qalıcı olaraq silinəcəkdir. Həqiqətən istədiyin budur? - + Cancel Ləğv et - LogReplayLink - - - Log Replay Error - Log Təkrar Səhv - - - - You must close all connections prior to replaying a log. - Bir logu təkrarlamazdan əvvəl bütün əlaqələri bağlamalısınız. - - - - Attempt to load new log while log being played - Log çalınan zaman yeni qeyd yükləməyə cəhd edimi - - - - Unable to open log file: '%1', error: %2 - Giriş faylı açıla bilmir: '%1', səhv:%2 - - - - The log file '%1' is corrupt or empty. - '%1' qeyd faylı pozulmuş və ya boşdur. - - - - Connect not allowed during Flight Data replay. - Uçuş məlumatlarının təkrarlanması zamanı qoşula bilməz. - - - - - Unable to seek to new position - Yeni mövqe axtarmaq mümkün deyil - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings - Log Təkrarlama Link Parametrləri + Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2dəq:%3san + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1saat:%2dəq:%3san + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Gözdən keçirin - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9364,180 +9437,214 @@ Click Ok to start the auto-tuning process. Bütün Fayllar (*) - + Pause Fasilə verin - + Play Oynadın - + Load Telemetry Log Telemetriya Logunu yükləyin - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9545,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9566,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9584,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 San - + 10 Sec 10 san - + 30 Sec 30 san - + 60 Sec 60 san - + Auto Avto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9802,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protokol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink loglama uğursuz oldu. %1 faylına yazıla bilmədi, giriş deaktiv edildi. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Hələ MAVLink v2.0 effektiv bir keçiddə MAVLink v1.0 istifadə edərək aşkarlanan radio. Zəhmət olmasa radio firmvareni təkmilləşdirin. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protokol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Uçuş məlumatları yazılmaq üçün açılmadı. %1 ə yazmaq olmur. Zəhmət olmasa başqa bir fayl yeri seçin. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? Aparatdaə hələ də aktiv əlaqə var. Çıxmaq istədiyinizə əminsiniz? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? Saxlanılan / göndərilməmiş davam edən bir missiyanız var. Bağlasanız dəyişiklikləri itirəcəksiniz. Bağlamaq istədiyinizə əminsiniz? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? Bir vasitə üçün parametr yeniləmələrini gözləyirsiniz. Bağlasanız dəyişiklikləri itirəcəksiniz. Bağlamaq istədiyinizə əminsiniz? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10060,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10123,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10141,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10330,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands Bütün əmrlər @@ -10396,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Aparat mövqeyinə keçin - + Move to previous item position Əvvəlki element mövqeyinə keçin - + Edit position... Mövqeyi düzəldin ... - + Show all values Bütün dəyərləri göstərin - + Mission Edit Missiya Düzəliş - + You have made changes to the mission item which cannot be shown in Simple Mode Sadə rejimdə göstərilə bilməyən tapşırıq elementində dəyişiklik etdiniz - + Item #%1 Maddə #%1 @@ -10448,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. MAV_CMD_DO_JUMP əmrinə görə missiyanı davam etdirə bilmir. @@ -10599,19 +10688,6 @@ Click Ok to start the auto-tuning process. Mock Link Ayarlar - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: - - MotorAssignment @@ -10734,444 +10810,119 @@ Do you wish to proceed? Propellers free? Then throttle up gently. Working properly? - Pərvanələr azaddır? Sonra yumşaq bir şəkildə yuxarı edin. Düzgün çalışır? - - - - Mission - Missiya - - - - Please confirm mission is valid (waypoints valid, no terrain collision). - Zəhmət olmasa missiyanın etibarlı olduğunu təsdiqləyin (yol nişanları etibarlıdır, ərazi toqquşmur). - - - - Last preparations before launch - Başlatmadan əvvəl son hazırlıqlar - - - - Payload - Yük - - - - Configured and started? Payload lid closed? - 43/5000 -Konfiqurasiya edildi və başladı? Yük qapağı bağlandı? - - - - Wind & weather - Külək və hava - - - - OK for your platform? - Platformanız üçün yaxşısınız? - - - - Flight area - Uçuş sahəsi - - - - Launch area and path free of obstacles/people? - Maneəsiz ərazi və yol? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - Aşağıdakı əmrlər bütün aparatlara şamil ediləcəkdir - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Xodda - - - - Disarmed - Xodsuz - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Diqqət: Aparat%1:%2 ilə eyni sistem id istifadə edir - - - - Connected to Vehicle %1 - %1 aparatına qoşulub - - - - MultiVehicleSelector - - - Vehicle - Aparat - - - - OfflineMap - - - Error Message - Xəta Mesajı - - - - Max Cache Disk Size (MB): - Max Cache Disk Ölçüsü (MB): - - - - Max Cache Memory Size (MB): - Max Cache Yaddaş Ölçüsü (MB): - - - - Memory cache changes require a restart to take effect. - Yaddaş cache dəyişiklikləri, qüvvəyə minməsi üçün yenidən başlamağı tələb edir. - - - - Mapbox Access Token - Mapbox Giriş Tokeni - - - - To enable Mapbox maps, enter your access token. - Mapbox xəritələrini aktivləşdirmək üçün giriş nişanını daxil edin. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Giriş Tokeni - - - - To enable Esri maps, enter your access token. - Esri xəritələrini aktivləşdirmək üçün giriş əlamətinizi daxil edin. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - Özünüz yaratdığınız tile dəstləri daxil olmaqla bütün tilelar silinəcəkdir. - -Həqiqətən istədiyin budur? - - - - Delete %1 and all its tiles. - -Is this really what you want? - %1 və bütün tileları silin. - -Bu, həqiqətən istədiyin budur? - - - - System Wide Tile Cache - Sistem Geniş tile Keşi - - - - Zoom Levels: - Böyütmə səviyyələri: - - - - Total: - Ümumi: - - - - Unique: - Unikal: - - - - Downloaded: - Yüklənib: - - - - Error Count: - Səhvlərin sayı: - - - - Size: - Ölçüsü: - - - - - Tile Count: - Tile sayı: - - - - Resume Download - Yükləməyə davam et - - - - Cancel Download - Yükləməni ləğv edin - - - - Delete - Silin - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Silinməyi təsdiqləyin - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Qapat - - - - - - - Cancel - Ləğv et - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Minimum böyütmə:%1 - - - - Max Zoom: %1 - Max Zoom:%1 - - - - - Add New Set - Yeni dəst əlavə edin + Pərvanələr azaddır? Sonra yumşaq bir şəkildə yuxarı edin. Düzgün çalışır? - - Name: - Adı: + + Mission + Missiya - - Map type: - Xəritə növü: + + Please confirm mission is valid (waypoints valid, no terrain collision). + Zəhmət olmasa missiyanın etibarlı olduğunu təsdiqləyin (yol nişanları etibarlıdır, ərazi toqquşmur). - - Fetch elevation data - Fetch yüksəkliyi məlumatları + + Last preparations before launch + Başlatmadan əvvəl son hazırlıqlar - - Min/Max Zoom Levels - Min / Maks Zoom Səviyyə + + Payload + Yük - - Est Size: - Təxmini Ölçüsü: + + Configured and started? Payload lid closed? + 43/5000 +Konfiqurasiya edildi və başladı? Yük qapağı bağlandı? - - Too many tiles - Tilelar çoxdur + + Wind & weather + Külək və hava - - Download - Endirin + + OK for your platform? + Platformanız üçün yaxşısınız? - - - Import - İdxal et + + Flight area + Uçuş sahəsi - - - Export - İxrac et + + Launch area and path free of obstacles/people? + Maneəsiz ərazi və yol? + + + MultiVehicleList - - Options - Seçimlər + + The following commands will be applied to all vehicles + Aşağıdakı əmrlər bütün aparatlara şamil ediləcəkdir - - Offline Maps Options - Oflayn xəritə seçimləri + + + Pause + Pause - - Select Tile Sets to Export - İxrac etmək üçün Tile Dəstləri seçin + + + Start Mission + Start Mission - - Select All - Hamısını seç + + Armed + Xodda - - Select None - Heç birini seçin + + Disarmed + Xodsuz - - Export Tile Set - Tile dəstini ixrac edin + + Arm + Arm - - Tile Set Export Progress - Tile İxrac proqresi təyin etdi + + RTL + RTL - - Tile Set Export Completed - Tile dəsti ixrac tamamlandı + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Xəritə tile set İdxal et + + Warning: A vehicle is using the same system id as %1: %2 + Diqqət: Aparat%1:%2 ilə eyni sistem id istifadə edir - - Append to existing set - Mövcud dəstə əlavə edin + + Connected to Vehicle %1 + %1 aparatına qoşulub + + + MultiVehicleSelector - - Replace existing set - Mövcud dəsti dəyişdirin + + Vehicle + Aparat @@ -11363,6 +11114,14 @@ Is this really what you want? Aparat + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11443,29 +11202,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe - + + Action + Action + + + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11560,47 +11319,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Naməlum%1:%2 - + Unable to takeoff, vehicle position not known. Qalxış edə bilmir, nəqliyyat vasitəsinin mövqeyi məlum deyil. - + Unable to go to location, vehicle position not known. Yerə gedə bilmir, nəqliyyat vasitəsinin mövqeyi məlum deyil. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Hündürlüyü dəyişdirmək olmur, evin mövqeyi bilinmir. - + Unable to change altitude, home position altitude unknown. Hündürlük dəyişdirilə bilmir, evin hündürlüyü bilinmir. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Missiyaya başlamaq olmur: Aparat xodlanmağı rədd etdi. - + Unable to start mission: Vehicle not changing to %1 flight mode. Missiyaya başlamaq olmur: Nəqliyyat%1 uçuş rejiminə dəyişmir. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl Versiya %1.%2.%3 və yuxarı PX4 Pro firmware versiyasını dəstəkləyir. Əvvəlcədən gözlənilməz nəticələrə səbəb olacaq bir versiyadan istifadə edirsiniz. Zəhmət olmasa firmware proqramını təkmilləşdirin. @@ -11729,269 +11493,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Kamera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -12000,18 +11736,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12761,78 +12497,78 @@ Is this really what you want? ParameterEditor - - Search: - Axtarış: - - - + Clear Təmizlə - + Show modified only Yalnız dəyişdirilmişləri göstər - + Tools Alətlər - + Refresh təzələmək - + Reset all to firmware's defaults Hamısını firmware standart parametrlərinə yenidən qurun - - + + Reset All Hamısını sıfırlayın - + Reset to vehicle's configuration defaults Avtomobilin konfiqurasiya defoltlarına yenidən qurun - + Load from file... Fayldan yükləyin ... - + Load Parameters Parametrləri yükləyin - + Save to file... Fayla yazın ... - + Save Parameters Parametrləri saxla - + Clear all RC to Param Param bütün RC sil - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12841,23 +12577,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Aparatı yenidən başladın - + Parameter Files (*.%1) Parametr Faylları (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Bütün parametrləri aparatın konfiqurasiya defoltlarına qaytarmaq üçün Reset seçin. - + Select Ok to reboot vehicle. Vasitəni yenidən başlatmaq üçün Ok seçin. @@ -12865,12 +12601,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Fayl yaratmaq olmur:%1 - + Unable to open file: %1 Fayl açmaq olmur:%1 @@ -12878,72 +12614,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Defolt: - - Parameter name: - Parametr adı: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Xəbərdarlıq: Aparatda uçuş zamanı dəyərlərin dəyişdirilməsi aparatın qeyri-sabitliyinə və aparatın itkisinə səbəb ola bilər. - + Make sure you know what you are doing and double-check your values before Save! Nə etdiyinizdən əmin olun və Saxlamadan əvvəl dəyərlərinizi iki dəfə yoxlayın! - + Force save (dangerous!) Zorla yadda saxlayın (təhlükəli!) - + Advanced settings Ətraflı parametrlər - + Manual Entry Əl ilə giriş - + Set RC to Param Param-a RC seçin @@ -12951,39 +12682,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parametr yazılmadı: aparat:%1 komp:%2 parametr:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parametr oxunmadı: aparat:%1 komp:%2 parametr:%3 - + Parameter cache CRC match failed Parametr keşində CRC matçı alınmadı - + Parameters not loaded since they are not currently on the vehicle: %1 Parametrlər hazırda aparatda olmadığından yüklənmədi:%1 - + Parameters not loaded due to type mismatch: %1 Tip uyğunsuzluğuna görə parametrlər yüklənmədi:%1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 aparatı,%2 aparatından parametrləri tam əldə edə bilmədi. Bu%1-in tam istifadəçi interfeysini göstərə bilməməsinə səbəb olacaqdır. Modifikasiya edilmiş proqram təminatından istifadə edirsinizsə, problemi həll etmək üçün hər hansı bir nəqliyyat vasitəsinin başlanğıc səhvlərini həll etməlisiniz. Standart firmware istifadə edirsinizsə, problemi həll etmək üçün daha yeni bir versiyaya yüksəltməyiniz lazım ola bilər. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. %1 aparatı parametrlər sorğusuna cavab vermədi. Bu%2 nin tam istifadəçi interfeysini göstərə bilməməsinə səbəb olacaq. @@ -13129,178 +12860,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Missiya elementi ünsiyyəti zamanı daxili səhv baş verdi: _ackTimeOut: _ gözlənilməz == AckNone - + Mission request list failed, maximum retries exceeded. Missiya tələbləri siyahısı alınmadı, maksimum cəhdlər aşıldı. - + Retrying %1 REQUEST_LIST retry Count %1 REQUEST_LIST yenidən cəhd edilir - + Mission read failed, maximum retries exceeded. Missiya oxunmadı, maksimum cəhdlər aşıldı. - + Retrying %1 MISSION_REQUEST retry Count %1 MISSION_REQUEST yenidən cəhd edilir - + Mission write failed, vehicle failed to send final ack. Missiya yazımı alınmadı, vasitə son ack göndərə bilmədi. - + Mission write mission count failed, maximum retries exceeded. Missiya yazma missiyasının sayı alınmadı, maksimum cəhdlər aşıldı. - + Vehicle did not request all items from ground station: %1 Nəqliyyat vasitəsi yer stansiyasından bütün vahidləri tələb etməyib:%1 - + Mission remove all, maximum retries exceeded. Missiya hamısını aradan qaldırdı, maksimum cəhdlər aşıldı. - + Retrying %1 MISSION_CLEAR_ALL retry Count %1 MISSION_CLEAR_ALL təkrar cəhd edilir - + Vehicle did not respond to mission item communication: %1 Avtomobil missiya ünsiyyətinə cavab vermədi:%1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Nəqliyyat vasitəsi xaricdəki kənar məhsulu tələb edir, sayı: sorğu%1:%2. Nəqliyyat vasitəsinə göndərmə uğursuz oldu. - + Vehicle remove all failed. Error: %1 Aparat çıxarılmadı. Xəta:%1 - + Item #%1 Command: %2 Maddə #%1 Əmr:%2 - + Frame: %1 Çərçivə:%1 - - - - - - - + + + + + + + Value: %1 Dəyər:%1 - + Mission accepted. Missiya qəbul edildi. - + Unspecified error. Müəyyən edilməmiş xəta. - + Coordinate frame is not supported. Koordinat çərçivəsi dəstəklənmir. - + Command is not supported. Komanda dəstəklənmir. - + Mission item exceeds storage space. Missiya maddəsi yaddaş yerini aşıb. - + One of the parameters has an invalid value. Parametrlərdən biri etibarsız bir dəyərə malikdir. - + Param 1 invalid value. Param 1 etibarsız dəyər. - + Param 2 invalid value. Param 2 etibarsız dəyər. - + Param 3 invalid value. Param 3 etibarsız dəyər. - + Param 4 invalid value. Param 4 etibarsız dəyər. - + Param 5 invalid value. Param 5 etibarsız dəyər. - + Param 6 invalid value. Param 6 etibarsız dəyər. - + Param 7 invalid value. Param 7 etibarsız dəyər. - + Received mission item out of sequence. Missiya maddəsi ardıcıllıqla alındı. - + Not accepting any mission commands. Heç bir tapşırıq əmrlərini qəbul etməmək. - + Unknown error: %1. Naməlum xəta:%1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Aparat geri qaytarıldı:%1. %2 aparat rəhbər elementi qəbul etmədi. @@ -13352,27 +13083,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Seçilmiş yol nöqtəsi - + Alt diff: Yüks fərqi: - + Azimuth: Azimut: - + Distance: Məsafə: - + Gradient: Gradient: @@ -13388,47 +13119,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Yönəlmə: - + Total Mission Ümumi Missiya - + Max telem dist: Maks telem məsafə: - + Time: Vaxt: - + Battery Batareya - + Batteries required: Lazım olan batareyalar: - + Upload Required Yükləmə tələb olunur - + Upload Yükləmək @@ -13441,122 +13172,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Nəqliyyat hazırda xoddadır. Missiyanı aparata yükləmək istəyirsiniz? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? Missiya maddələri üçün standart hündürlüyü dəyişdirdiniz. Bu yüksəkliyi hazırkı missiyadakı bütün maddələrə tətbiq etmək istərdinizmi? - + You need at least one item to create a KML. KML yaratmaq üçün ən azı bir elementə ehtiyacınız var. - + Plan is waiting on terrain data from server for correct altitude values. Plan, hündürlük dəyərlərinin düzgün olmasını serverdən ərazi məlumatlarında gözləyir. - + Plan Upload Planı Yükləmək - + Select Plan File Plan Faylını seçin - + Save Plan Planı yadda saxla - + Save KML KML yadda saxla - + File Fayl - + Waypoint Waypoint - + ROI Maraq dairəsi - + Pattern Naxış - + Center Mərkəz - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13565,191 +13296,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Qalxış - + Rally Point Ralli nöqtəsi - + Cancel ROI ROI ləğv edin - + Return Qaytar - + Land Eniş - - + + Mission Missiya - + Fence Fence - - + + Rally Ralli - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? Saxlanmamış / göndərilməmiş dəyişiklikləriniz var. Aparatdan yükləmə bu dəyişiklikləri itirəcəkdir. Aparatdan yükləmək istədiyinizə əminsiniz? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? Saxlanmamış / göndərilməmiş dəyişiklikləriniz var. Bir fayldan yükləmə bu dəyişiklikləri itirəcəkdir. Bir fayldan yükləmək istədiyinizə əminsiniz? - - + + Clear Təmizlə - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Bütün missiya maddələrini silmək və missiyanı nəqliyyat vasitəsindən təmizləmək istədiyinizə əminsiniz? - + Create complex pattern: Mürəkkəb bir nümunə yaradın: - + You have unsaved changes. Saxlanmamış dəyişiklikləriniz var. - + Open... Açın... - - - + + + Save Yadda saxla - - + + Unable to %1 %1-i etmək olmur - + Plan has incomplete items. Complete all items and %1 again. Planda natamam maddələr var. Bütün elementləri tamamlayın və %1 yenidən edin. - + Are you sure you want to remove current plan and create a new plan? Cari planı silmək və yeni bir plan yaratmaq istədiyinizə əminsiniz? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. Saxlanmamış dəyişiklikləriniz var. Aparata yükləməlisiniz və ya bir faylda saxlamalısınız. - - + + Create Plan Plan yaradın - + Storage Saxlama - + Save As... Kimi Saxla ... - + Save Mission Waypoints As KML... Missiya Nöqtələrini KML olaraq Saxla ... - + KML KML - - - + + + Upload Yükləmək - + Vehicle Aparat - + Download Endirin @@ -13795,34 +13516,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - %1 nöqtəsi əlavə etmək üçün vurun - - - - - Right Click to end polygon - - Poliqonu bitirmək üçün sağ vurun - - - - Click to add point - Nöqtəni əlavə etmək üçün vurun - - - - Click to add point - Right Click to end polygon - Nöqtəni əlavə etmək üçün vurun - Çoxbucağı bitirmək üçün sağ vurun - - - - Adjust polygon by dragging corners - Küncləri sürükləyərək çoxbucağı düzəldin - - PowerComponent @@ -14377,44 +14070,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> Mövcud istifadəçinin seriya cihazlarına daxil olmaq üçün düzgün icazələri yoxdur. Modemmanager'i də çıxartmalısınız, çünki bu da müdaxilə edir<br/><br/>Ubuntu istifadə edirsinizsə, bu problemləri həll etmək üçün aşağıdakı əmrləri yerinə yetirin<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. %1 saxlanılan parametrlərin formatı dəyişdirildi. Saxladığınız parametrlər ilkin vəziyyətə qaytarıldı. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Telemetriya qeydini yadda saxlamaq olmur. Telemetriyanı '%1' -ə kopyalama xətası: '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parametrlər firmwareə çatışmır. Tamamilə dəstəklənməyən və ya firmware'nizdə bir səhv olduğu bir firmware versiyasını işlətmiş ola bilərsiniz. Yarımçıq parametrlər:%1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Telemetriya qeydini yadda saxlamaq olmur. Tətbiq saxlamaq qovluğu təyin edilməyib. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Telemetriya qeydini yadda saxlamaq olmur. "%1" telemetriya saxlama qovluğu mövcud deyil. + + Database Not Initialized + Database Not Initialized @@ -14428,32 +14114,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Titrəmə - + Log Download Logları yükləyin - + GeoTag Images GeoTag Şəkilləri - + MAVLink Console MAVLink konsolu - + MAVLink Inspector MAVLink müfəttişi - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? XƏBƏRDARLIQ: Qabaqcıl rejimi daxil etməyi planlaşdırırsınız. Yanlış istifadə olunarsa, bu, zəmanətinizi ləğv edərək aparatınızın nasazlığına səbəb ola bilər. Bunu yalnız müştəri dəstəyi ilə göstəriş verildiyi təqdirdə etməlisiniz. Ətraflı rejimi aktivləşdirmək istədiyinizə əminsiniz? @@ -14511,178 +14197,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Yüklənmiş faylı%1-ə saxlaya bilmədi. Xəta:%2 - + Download cancelled Yükləmə ləğv edildi - + Error: File Not Found Xəta: Fayl tapılmadı - + Error during download. Error: %1 Yükləmə zamanı səhv. Xəta:%1 - - QGCLogEntry - - - Pending - Gözləyən - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14690,24 +14368,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14836,83 +14506,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14920,60 +14590,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14981,46 +14707,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Naməlum - - - - Pixhawk - Pixhawk - - - - SiK Radio - SIK Radio - - - - PX4 Flow - PX4 axını - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Rəhbər rejimi aparat tərəfindən dəstəklənmir. - - - Follow Me - Məni izləyin - The following required keys are missing: %1 @@ -15104,25 +14795,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI statusu - - RC RSSI Data Unavailable - RC RSSI Məlumatları mövcud deyil - - - - N/A - No data available - Yoxdur - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15210,8 +14890,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Çubuqlarınızı mərkəzləşdirin və tıxacı hər tərəfə dartın, sonra zımbaları çıxarmaq üçün Ok düyməsini basın. Ok düyməsini basdıqdan sonra radiounuzdakı trimlər sıfıra endir. @@ -15327,18 +15018,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum bağlamaq - - + + Copy Trims Trimləri kopyalayın - + Mode 1 Rejim 1 - + Mode 2 Rejim 2 @@ -15444,17 +15135,17 @@ Zəhmət olmasa, bütün motor gücünün aparatdan ayrıldığına əmin olun. Davam etmək üçün Sonrakı düyməsini basın - + Next Sonrakı - + Calibrate Kalibr edin - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15466,12 +15157,12 @@ Lövhəyə kalibrləmə yükləmək üçün Sonrakı düyməsini vurun. Bu dəy RallyPointController - + Rally: %1 Ralli: %1 - + Rally Points supports version %1 Ralli Nöqtələr%1 versiyasını dəstəkləyir @@ -15514,192 +15205,213 @@ Lövhəyə kalibrləmə yükləmək üçün Sonrakı düyməsini vurun. Bu dəy RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS - - - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Arm Status Error + Arm Status Error - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + Basic ID + Basic ID - - Altitude Fixed - Altitude Fixed + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Latitude - Latitude + + + Broadcast + Broadcast - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16561,7 +16273,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Bağlantı Ayarları @@ -16569,24 +16281,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Məlumat göndərilə bilmədi -%1 linki qopdu! - - - - Error connecting: Could not create port. %1 - Bağlantı xətası: port yarada bilmədi. %1 - - - - Could not read data - link %1 is disconnected! - Məlumatları oxuya bilmədim -%1 linki qapandı! + + Serial Link Error + Serial Link Error - - Link Error - Link xətası + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16652,6 +16354,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16771,57 +16511,57 @@ ROTATION_NONE indicates component points in direction of flight. itkin mesaj paneli mətni - + %1 setup must be completed prior to %2 setup. %1 quraşdırma%2 quraşdırmadan əvvəl tamamlanmalıdır. - + %1 does not currently support setup of your vehicle type. %1 hazırda aparatınızın növünün qurulmasını dəstəkləmir. - + Vehicle settings and info will display after connecting your vehicle. Aparatınızın parametrləri və məlumatları nəqliyyat vasitənizi bağladıqdan sonra görünəcəkdir. - + You are currently connected to a vehicle but it did not return the full parameter list. Hal-hazırda bir aparata qoşuldunuz, ancaq parametr listini tam vermədi. - + As a result, the full set of vehicle setup options are not available. Nəticədə, vasitə quraşdırma seçimlərinin tam dəsti mövcud deyil. - + Summary Xülasə - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameterlər @@ -16945,42 +16685,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Naməlum:%1 - + L L - + Takeoff Qalxış - + Land Eniş - + Transition Direction Transition Direction - + VTOL Land VTOL eniş - + ROI Maraq dairəsi - + Loiter Loiter @@ -16996,7 +16736,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17004,47 +16744,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17401,7 +17141,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Ayarları @@ -17409,20 +17149,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link xətası + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - %1 linkində xəta. Bağlantı uğursuz oldu + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - %1 linkində xəta. Soketdəki xəta:%2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17457,48 +17219,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetriya RSSI statusu - + Local RSSI: Yerli RSSI: - - + + dBm dBm - + Remote RSSI: Uzaqdan RSSI: - + RX Errors: RX xətaları: - + Errors Fixed: Xətalar düzəldildi: - + TX Buffer: TX Bufer: - + Local Noise: Yerli səs-küy: - + Remote Noise: Uzaqdan səs-küy: @@ -17690,7 +17452,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17858,7 +17620,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Ayarları @@ -17866,123 +17628,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP bağlantısı xətası - - Error binding UDP port: %1 - UDP portunu bağlamaq xətası:%1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Zeroconf qeydiyyatı zamanı xəta + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18102,22 +17901,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperatur - + Choose the measurement units you want to use. You can also change it later in General Settings. Istifadə etmək istədiyiniz ölçü vahidlərini seçin. Bundan sonra onu Ümumi Parametrlərdə dəyişə bilərsiniz. - + System of units Vahidlər sistemi - + Metric System Metrik Sistem - + Imperial System İmperator Sistemi @@ -18323,7 +18122,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 kompleks maddə versiyası%2 dəstəklənmir @@ -18351,78 +18150,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Hündürlük - + Radius Radius - + Loiter clockwise Saat yönündə dolanma - + Landing point Eniş nöqtəsi - + Heading Yönəlmə - + Landing Dist Eniş məsafəsi - + Altitudes relative to launch Başlanğıc nöqtəsinə nisbi yüksəkliklər - + Camera Kamera - + * Actual flight path will vary. * Faktiki uçuş yolu dəyişəcək. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Eniş nöqtəsini təyin etmək üçün xəritəyə vurun. - + - or - - və ya - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Külək və maneələr üçün eniş istiqamətini və eniş nöqtəsinə qədər olan məsafəni tənzimləmək üçün loiter nöqtəsini çəkin. - + Done Bitdi @@ -18430,183 +18229,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Dolanma - + Approach Approach - + Land Eniş - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Sabit qanad - - - - VTOL: Multi-Rotor - VTOL: Çox Rotor - - Vehicle - + Mission transfer failed. Error: %1 Missiya köçürüldü. Xəta:%1 - + GeoFence transfer failed. Error: %1 GeoFence transferi uğursuz oldu. Xəta:%1 - + Rally Point transfer failed. Error: %1 Rally Point transferi alınmadı. Xəta:%1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 uçuş rejimi - + armed xodlandı - + disarmed söndürüldü - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Aparat əmrə cavab vermədi:%1 - + Bootloader flash succeeded Yükləmə flaş müvəffəq oldu - + %1 command temporarily rejected %1 əmri müvəqqəti olaraq rədd edildi - + %1 command denied %1 əmr rədd edildi - + %1 command not supported %1 əmri dəstəklənmir - + %1 command failed %1 əmri alınmadı @@ -18614,42 +18395,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18657,49 +18438,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18807,22 +18588,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video qəbuledici hazır deyil. - - - + Invalid video format defined. Yanlış video format müəyyən edildi. - + Unabled to record video. Video save path must be specified in Settings. Video yazmaq mümkün deyil. Video yadda saxlama yolu parametrlərdə göstərilməlidir. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18830,142 +18606,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_bg_BG.ts b/translations/qgc_source_bg_BG.ts index 10498ce1e70..aaf22db52b8 100644 --- a/translations/qgc_source_bg_BG.ts +++ b/translations/qgc_source_bg_BG.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_de_DE.ts b/translations/qgc_source_de_DE.ts index 1adfa27ff98..b2a81636da7 100644 --- a/translations/qgc_source_de_DE.ts +++ b/translations/qgc_source_de_DE.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Fehler: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNUNG: Für das von Ihnen verwendete Flugcontroller-Board wurde eine kritische Warnung veröffentlicht, die von weiteren Flügen abrät. Für Details siehe: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Folge mir + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings - Bluetooth Link Settings + + Manual + Manual - + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings + Bluetooth Link Settings + + + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_el_GR.ts b/translations/qgc_source_el_GR.ts index 65a6779cbd6..b2459a1546a 100644 --- a/translations/qgc_source_el_GR.ts +++ b/translations/qgc_source_el_GR.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_es_ES.ts b/translations/qgc_source_es_ES.ts index 308ae36daa4..339c1f36344 100644 --- a/translations/qgc_source_es_ES.ts +++ b/translations/qgc_source_es_ES.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - Error del servidor ADSB: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 ADVERTENCIA: El controlador de vuelo que está utilizando tiene un boletín de servicio crítico que aconseja no volar. Para más detalles, consulte: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_fi_FI.ts b/translations/qgc_source_fi_FI.ts index 9f006106d83..006e6f93fdc 100644 --- a/translations/qgc_source_fi_FI.ts +++ b/translations/qgc_source_fi_FI.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_fr_FR.ts b/translations/qgc_source_fr_FR.ts index 65de99d79df..f38af31be0c 100644 --- a/translations/qgc_source_fr_FR.ts +++ b/translations/qgc_source_fr_FR.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_he_IL.ts b/translations/qgc_source_he_IL.ts index a97e1e4e4bc..e4ff6217e61 100644 --- a/translations/qgc_source_he_IL.ts +++ b/translations/qgc_source_he_IL.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_it_IT.ts b/translations/qgc_source_it_IT.ts index 3c2725590b9..09734cb0470 100644 --- a/translations/qgc_source_it_IT.ts +++ b/translations/qgc_source_it_IT.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_ja_JP.ts b/translations/qgc_source_ja_JP.ts index e2f4f656612..279b06fbbd7 100644 --- a/translations/qgc_source_ja_JP.ts +++ b/translations/qgc_source_ja_JP.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSBサーバ エラー: %1 - - APMAirframeComponent @@ -109,7 +101,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 警告: お使いのボードには、飛行を控えるよう勧告する重大なサービス情報が含まれています。詳細は以下をご覧ください: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -117,30 +109,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe 低電圧フェイルセーフ - - + + Action アクション - - + + Voltage Trigger 電圧 トリガー - - + + mAh Trigger mAh トリガー - + Critical Voltage Failsafe 限界電圧フェイルセーフ @@ -487,66 +484,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Soloビデオリンク設定エラー: %1 - + Unable to change altitude, vehicle altitude not known. 高度が不明のため、高度を変更することができません。 - + Unable to pause vehicle. 機体を一時停止できません。 - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff 機体はガイド補助離陸をサポートしていません - + Unable to takeoff, vehicle position not known. 機体位置が不明のため、離陸できません。 - + Unable to takeoff: Vehicle failed to change to Guided mode. 離陸できません: ガイド補助モードに変更できませんでした。 - + Unable to takeoff: Vehicle failed to arm. 離陸できません: 機体はアームできませんでした。 - - + + Unable to start mission: Vehicle failed to change to Auto mode. ミッションを開始できません: 自動モードに変更できませんでした。 - + Unable to start mission: Vehicle failed to change to Guided mode. ミッションを開始できません: ガイド補助モードに変更できませんでした。 - + Unable to start mission: Vehicle failed to arm. ミッションを開始できません: 機体はアームできませんでした。 - - - Follow failed: Home position not set. - フォローに失敗しました: ホーム位置が設定されていません。 - - - - Follow failed: Ground station cannot provide required position information. - フォローに失敗しました: グランドステーションは必要な位置情報を提供できません。 - APMFlightModeIndicator @@ -858,42 +870,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - フォローミー + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - フォローミー設定は、グランドステーションの位置に追従する機体のサポートを設定するために使用します。 + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1モニター + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1容量 + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2モニター + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2容量 + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1174,8 +1206,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS フェイルセーフ + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1183,12 +1215,12 @@ アクション - - Timeout - タイムアウト + + Loss Timeout + Loss Timeout - + Failsafe Options フェイルセーフ オプション @@ -1857,25 +1889,25 @@ - + - + Return to Launch 離陸地点へ戻る - + - + Return at current altitude 現在の高度で戻る - + - + Return at specified altitude: 指定した高度で戻る: @@ -1898,14 +1930,14 @@ 最終着陸箇所の降下速度: - - + + Arming Checks アームチェック - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. 警告: アームチェックをOFFにすると、機体の制御ができなくなる可能性があります。 @@ -2080,42 +2112,42 @@ APMSafetyComponentPlane - + Failsafe Triggers フェイルセーフ トリガー - + Throttle PWM threshold: スロットルPWMしきい値: - + Voltage threshold: 電圧しきい値: - + MAH threshold: 容量(mAh)しきい値: - + GCS failsafe GCS フェイルセーフ - + Return to Launch 離陸地点へ戻る - + Return at current altitude 現在の高度で戻る - + Return at specified altitude: 指定した高度で戻る: @@ -2510,34 +2542,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: スロットル フェイルセーフ: - - - + + + Disabled 無効 - + Voltage failsafe: 電圧 フェイルセーフ: - + mAh failsafe: 容量(mAh) フェイルセーフ: - + RTL min alt: RTL最低高度: - + current 現在 @@ -3465,12 +3497,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server MAVLinkトラフィックがサポートサーバに転送されています - + Server name: サーバ名: @@ -3892,40 +3924,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th アクチュエータ テストコマンドに失敗しました + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: ログイン: - + Password: パスワード: - + Don't have an account? アカウントをお持ちですか？ - + Register 新規登録 - + List of available devices 利用可能なデバイス一覧 - + Refresh 更新 - + Click "Refresh" to authorize "更新"をクリックして認証 @@ -4057,14 +4097,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th カスタムFw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - エアリンクの設定 - - AirmapSettings @@ -4134,7 +4166,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 コンソールログ出力ファイルを開けませんでした %1 : %2 @@ -4152,17 +4184,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th ログカテゴリ - + Search: 検索: - + Clear 消去 - + Clear All すべて消去 @@ -4240,26 +4272,418 @@ Please place your vehicle in water, click the button, and wait. Note that the th カスタムアクション - + Save to SD card specified for application data. But no SD card present. Using internal storage. アプリケーションデータをSDカードに保存します。しかしながらSDカードがありません。現在、内部ストレージを使用しています。 - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. アプリケーションデータをSDカードに保存します。しかしながらSDカードは書き込み保護されています。現在、内部ストレージを使用しています。 - + (Partial) (部分的) - + (Test Only) (テストのみ) + + ArduCopterFirmwarePlugin + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Altitude Hold + Altitude Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Loiter + Loiter + + + + RTL + RTL + + + + Circle + Circle + + + + Land + Land + + + + Drift + Drift + + + + Sport + Sport + + + + Flip + Flip + + + + Autotune + Autotune + + + + Position Hold + Position Hold + + + + Brake + Brake + + + + Throw + Throw + + + + Avoid ADSB + Avoid ADSB + + + + Guided No GPS + Guided No GPS + + + + Smart RTL + Smart RTL + + + + Flow Hold + Flow Hold + + + + Follow + Follow + + + + ZigZag + ZigZag + + + + SystemID + SystemID + + + + AutoRotate + AutoRotate + + + + AutoRTL + AutoRTL + + + + Turtle + Turtle + + + + ArduPlaneFirmwarePlugin + + + Manual + Manual + + + + Circle + Circle + + + + Stabilize + Stabilize + + + + Training + Training + + + + Acro + Acro + + + + FBW A + FBW A + + + + FBW B + FBW B + + + + Cruise + Cruise + + + + Autotune + Autotune + + + + Auto + Auto + + + + RTL + RTL + + + + Loiter + Loiter + + + + Takeoff + Takeoff + + + + Avoid ADSB + Avoid ADSB + + + + Guided + Guided + + + + Initializing + Initializing + + + + QuadPlane Stabilize + QuadPlane Stabilize + + + + QuadPlane Hover + QuadPlane Hover + + + + QuadPlane Loiter + QuadPlane Loiter + + + + QuadPlane Land + QuadPlane Land + + + + QuadPlane RTL + QuadPlane RTL + + + + QuadPlane AutoTune + QuadPlane AutoTune + + + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal + + + + ArduRoverFirmwarePlugin + + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + ArmedIndicator @@ -4286,19 +4710,9 @@ Please place your vehicle in water, click the button, and wait. Note that the th AudioOutput - - negative - ネガティブ - - - - point - ポイント - - - - meters - メートル + + %1 + %1 @@ -4425,120 +4839,97 @@ OKをクリックして、自動調整プロセスを開始します。 BatteryIndicator - + + 100% 100％ - - + + n/a n/a - + Battery %1 バッテリー %1 - + Status 状態 - + Charge State 充電状態 - - + + Remaining 残り - + Voltage 電圧 - + Consumed 電力消費 - + Temperature 温度 - + Function 機能 - + Battery Display バッテリー表示 - - Vehicle Power - 機体電源 - - - - Configure - 設定 - - - - Power - 電源 - - - - BatteryIndicatorContentItem - - - Battery Status - バッテリー状態 - - - - Battery %1 - バッテリー %1 + + Value + Value - - Charge State - 充電状態 + + Coloring + Coloring - - - Remaining - 残り + + Low + Low - - Voltage - 電圧 + + Critical + Critical - - Consumed - 電力消費 + + Vehicle Power + 機体電源 - - Temperature - 温度 + + Configure + 設定 - - Function - 機能 + + Power + 電源 @@ -4552,12 +4943,12 @@ OKをクリックして、自動調整プロセスを開始します。 BluetoothConfiguration - + Bluetooth Link Settings Bluetooth接続設定 - + Bluetooth Not Available Bluetoothが利用できません @@ -4565,10 +4956,15 @@ OKをクリックして、自動調整プロセスを開始します。 BluetoothLink - + Bluetooth Link Error Bluetooth接続エラー + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4598,6 +4994,34 @@ OKをクリックして、自動調整プロセスを開始します。停止 + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4778,27 +5202,27 @@ OKをクリックして、自動調整プロセスを開始します。 CameraCalcCamera - + Width 幅 - + Height 高さ - + Sensor センサ - + Image 画素数 - + Focal length 焦点距離 @@ -4806,27 +5230,27 @@ OKをクリックして、自動調整プロセスを開始します。 CameraCalcGrid - + Front Lap フロントラップ - + Side Lap サイドラップ - + Overlap オーバーラップ - + Select one: 1つ選択: - + Grnd Res 解像度 @@ -5088,7 +5512,7 @@ OKをクリックして、自動調整プロセスを開始します。コンポーネント %1 - + Internal Error: Parameter MetaData major must be 1 内部エラー: パラメータMetaDataは1でなければなりません @@ -5096,13 +5520,13 @@ OKをクリックして、自動調整プロセスを開始します。 ComplexMissionItem - - + + This Pattern does not support Presets. このパターンはプリセットをサポートしていません。 - + '%1' is a built-in preset which cannot be deleted. '%1' は削除できない組み込みプリセットです。 @@ -5171,18 +5595,18 @@ OKをクリックして、自動調整プロセスを開始します。 CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` カスタムアクションファイルのロードに失敗しました: `%1` エラー: `%2` - - + + Custom actions file - incorrect format: %1 カスタムアクションファイル - 不正なフォーマット: %1 - + Custom actions file - incorrect format: JsonValue not an object カスタムアクションファイル - 不正なフォーマット: Json値がオブジェクトではありません @@ -5552,14 +5976,6 @@ OKをクリックして、自動調整プロセスを開始します。MGRS - - ExitWithErrorWindow - - - Close - 閉じる - - FTPManager @@ -5613,53 +6029,58 @@ OKをクリックして、自動調整プロセスを開始します。機体位置を設定 - - + + Altitude 高度 - + + Flight Speed + Flight Speed + + + Radius 半径 - + Loiter clockwise ロイター 時計回り - + Landing point 着陸地点 - + Heading ヘッディング - + Glide Slope グライドスロープ - + Altitudes relative to launch 離陸地点からの相対高度 - + Drag the loiter point to adjust landing direction for wind and obstacles. ロイターポイントをドラッグし、風や障害物に合わせて着陸方向を調整します。 - + Done 完了 - + Camera カメラ @@ -5674,32 +6095,32 @@ OKをクリックして、自動調整プロセスを開始します。高度にロイターを使用 - + Distance 距離 - + * Approximate glide slope altitudes. * おおよそのグライドスロープの高度。 - + * Actual flight path will vary. * 実際の飛行経路は異なります。 - + * Avoid tailwind on landing. * 着陸時の追い風は避けてください。 - + Click in map to set landing point. 地図をクリックして着陸地点を設定します。 - + - or - - or - @@ -5707,22 +6128,22 @@ OKをクリックして、自動調整プロセスを開始します。 FWLandingPatternMapVisual - + Loiter ロイター - + Approach アプローチ - + Landing Area 着陸エリア - + Glide Slope グライドスロープ @@ -5790,23 +6211,10 @@ OKをクリックして、自動調整プロセスを開始します。無効な番号 - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - 無効な値 - - - + Value Details 値の詳細 @@ -5863,22 +6271,22 @@ OKをクリックして、自動調整プロセスを開始します。 Firmware Class - + PX4 Pro PX4 Pro - + ArduPilot ArduPilot - + Generic 汎用 - + Unknown 不明 @@ -5988,376 +6396,8 @@ OKをクリックして、自動調整プロセスを開始します。 FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R センサ - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 16mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 - - - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 - - - - a7r III 35mm - a7r III 35mm - - - - a7r IV 35mm - a7r IV 35mm - - - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 - - - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 - - - - DSC-RX0 - DSC-RX0 - - - - Sony DSC-RX0 - Sony DSC-RX0 - - - - DSC-RX1R II 35mm - DSC-RX1R II 35mm - - - - ILCE-QX1 - ILCE-QX1 - - - - Sony ILCE-QX1 - Sony ILCE-QX1 - - - - NEX-5R 20mm - NEX-5R 20mm - - - - Sony NEX-5R 20mm - Sony NEX-5R 20mm - - - - RX100 II 28mm - RX100 II 28mm - - - - Sony RX100 II 28mm - Sony RX100 II 28mm - - - - - - - Yuneec - Yuneec - - - - CGOET - CGOET - - - - Yuneec CGOET - Yuneec CGOET - - - - E10T - E10T - - - - Yuneec E10T - Yuneec E10T - - - - E50 - E50 - - - - Yuneec E50 - Yuneec E50 - - - - E90 - E90 - - - - Yuneec E90 - Yuneec E90 - - - - - Flir - Flir - - - - Duo R - Duo R - - - - Flir Duo R - Flir Duo R - - - - Duo Pro R - Duo Pro R - - - - - Workswell - Workswell - - - - - Wiris Security - Wiris Security - - - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. 機体は最新安定版ファームウェアを適用していません。適用中 %1, 最新安定版 %2 @@ -6375,11 +6415,6 @@ OKをクリックして、自動調整プロセスを開始します。Firmware Setup ファームウェア設定 - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 はPixhawk デバイス、SiK Radios、PX4 Flow Smart Camera のファームウェアをアップグレードできます。 - Update the autopilot firmware to the latest version @@ -6391,7 +6426,7 @@ OKをクリックして、自動調整プロセスを開始します。すべての %1 への機体接続が必要 - + Upgrade cancelled アップグレードがキャンセルされました @@ -6400,6 +6435,11 @@ OKをクリックして、自動調整プロセスを開始します。Select Firmware File ファームウェアファイルを選択 + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6486,162 +6526,144 @@ OKをクリックして、自動調整プロセスを開始します。デバイスが見つかりました - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. ファームウェア一覧がダウンロード中か、もしくは現在選択可能なファームウェアがありません。 - + You must choose a board type. ボードタイプを選択する必要があります。 - + No firmware was found for the current selection. 現在選択されているファームウェアが見つかりません。 - - + Standard Version (stable) 標準バージョン (安定版) - + Beta Testing (beta) ベータテスト版 (beta) - + Developer Build (master) 開発者ビルド版 (master) - - - + + Custom firmware file... カスタムファームウェアファイル... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version 標準バージョン - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - PX4-Flowボードを検出しました。PX4-Flowで適用するファームウェアは機体で適用するAutoPilotファームウェアと同一である必要があります。 - - - + Detected Pixhawk board. You can select from the following flight stacks: Pixhawkボードを検出しました。以下の飛行スタックから選択できます: - + Press Ok to upgrade your vehicle. OKを押し、機体のアップグレードを実施します。 - + Downloading list of available firmwares... 利用可能なファームウェアのリストをダウンロードしています... - + No Firmware Available ファームウェアがありません - + Advanced settings 詳細設定 - + Select the standard version or one from the file system (previously downloaded): 標準バージョンまたはファイルシステムから (あらかじめダウンロードしておいた) バージョンを選択します: - - Select which version of the firmware you would like to install: - インストールしたいファームウェアのバージョンを選択してください: - - - + Select which version of the above flight stack you would like to install: 上記の飛行スタックの、どのバージョンをインストールするかを選択します: - + WARNING: BETA FIRMWARE. 警告：ベータ版のファームウェア. - + This firmware version is ONLY intended for beta testers. このバージョンのファームウェアは【ベータテスターのみ】ご利用ください。 - + Although it has received FLIGHT TESTING, it represents actively changed code. 飛行テストを実施していますが、積極的にコードを変更しています。 - + Do NOT use for normal operation. 通常の操作では【使用しないでください】 - + WARNING: CONTINUOUS BUILD FIRMWARE. 警告: 継続ビルドされているファームウェア. - + This firmware has NOT BEEN FLIGHT TESTED. このファームウェアは【飛行テストを行っていません】 - + It is only intended for DEVELOPERS. あくまでも【開発者向け】のものです。 - + Run bench tests without props first. まずはプロペラを装着せずにベンチテストを実施します。 - + Do NOT fly this without additional safety precautions. 安全対策をせずに【飛行しないでください】 - + Follow the forums actively when using it. 積極的にフォーラムにご参加ください。 - + Flash ChibiOS Bootloader ChibiOSブートローダーの書き込み @@ -6649,87 +6671,87 @@ OKをクリックして、自動調整プロセスを開始します。 FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. ファームウェアのアップグレード中は接続できません。 - + Connected to bootloader: ブートローダーに接続しました: - + Version: %1 バージョン: %1 - + Board ID: %1 ボードID: %1 - + Flash size: %1 フラッシュサイズ: %1 - + Custom firmware selected but no filename given. カスタムファームウェアが選択されましたがファイル名が指定されていません。 - + Unable to find specified firmware for board type ボードの種類に応じたファームウェアが見つかりません - + No firmware file selected ファームウェアファイルが選択されていません - + Downloading firmware... ファームウェアをダウンロード中... - + From: %1 元: %1 - + Download complete ダウンロードが完了しました - + Image load failed ファームウェア読み込みに失敗しました - + Bootloader not found ブートローダーが見つかりません - + Image size of %1 is too large for board flash size %2 %1 のファームウェアイメージサイズがボード書き込みサイズ %2 に対して大きすぎます。 - + Upgrade complete アップグレードが完了しました - + Upgrade cancelled アップグレードがキャンセルされました - + Choose board type ボードの種類を選択 @@ -6830,7 +6852,7 @@ OKをクリックして、自動調整プロセスを開始します。固定翼機 着陸 - + %1 complex item version %2 not supported %1 の複雑な項目バージョン %2 はサポートされていません @@ -6838,12 +6860,12 @@ OKをクリックして、自動調整プロセスを開始します。 FlightDisplayViewVideo - + WAITING FOR VIDEO 録画 待機中 - + VIDEO DISABLED 録画を無効にしました @@ -6856,15 +6878,6 @@ OKをクリックして、自動調整プロセスを開始します。ポジションを指定 - - FlightModeDropdown - - - N/A - No data to display - 該当なし - - FlightModeIndicator @@ -7019,26 +7032,31 @@ OKをクリックして、自動調整プロセスを開始します。 + Set Heading + Set Heading + + + Lat: %1 緯度: %1 - + Lon: %1 経度: %1 - + Edit ROI Position ROIポジションを編集 - + Cancel ROI ROI キャンセル - + Edit Position ポジションを編集 @@ -7092,153 +7110,153 @@ OKをクリックして、自動調整プロセスを開始します。 FlyViewSettings - + <None> <なし> - + General 全般 - + Use Preflight Checklist 飛行前チェックリストの実施 - + Enforce Preflight Checklist 飛行前チェックリストの強制 - + Keep Map Centered On Vehicle マップ中央に機体を配置 - + Show Telemetry Log Replay Status Bar テレメトリーログのリプレイステータスバーを表示 - + Show simple camera controls (DIGICAM_CONTROL) 簡易カメラコントロールを表示 (DIGICAM_CONTROL) - + Update return to home position based on device location. デバイスの位置に基づいてホームポジションに戻ります。 - + Guided Commands ガイド付きコマンド - + Minimum Altitude 最低高度 - + Maximum Altitude 最大高度 - + Go To Location Max Distance 設定位置までの最大距離 - + Custom MAVLink Actions カスタムMAVLinkアクション - + Custom action JSON files should be created in the '%1' folder. カスタムアクション JSONファイルは、'%1' フォルダに作成する必要があります。 - + Fly View Custom Actions 飛行ビュー カスタムアクション - + Joystick Custom Actions ジョイスティック カスタムアクション - + Virtual Joystick 仮想ジョイスティック - - + + Enabled 有効 - + Auto-Center Throttle スロットル オートセンター - + Instrument Panel インストルメント・パネル - + Show additional heading indicators on Compass コンパスに追加のヘッディングインジケータを表示 - + Lock Compass Nose-Up コンパスのロック時にノーズアップ - + 3D View 3D 表示 - + 3D Map File: 3Dマップ ファイル: - + Clear 消去 - + Select File ファイル選択 - + OpenStreetMap files (*.osm) OpenStreetMap ファイル (*.osm) - + Select map file 地図ファイルの選択 - + Average Building Level Height 平均的な建物の高さ - + Vehicles Altitude Bias 機体高度バイアス @@ -7309,113 +7327,131 @@ OKをクリックして、自動調整プロセスを開始します。ダブルクリックで全画面表示を終了 + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status 機体のGPS状態 - - + + Satellites 人工衛星 - + GPS Lock GPSロック - + HDOP HDOP - + VDOP VDOP - + Course Over Ground 地上コース - + RTK GPS Status RTK GPS状態 - + Survey-in Active サーベイイン 有効 - + RTK Streaming RTK ストリーミング - + Duration 期間 - + Accuracy 精度 - + Current Accuracy 現在の精度 - + RTK GPS Settings RTK GPS 設定 - + AutoConnect 自動接続 - - Perform Survey-In - 調査を実行 + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - 指定されたベースポジションを使用 + + Min Duration + Min Duration - + Current Base Position 現在のベースポジション - + Save 保存 - + Not Yet Valid まだ有効ではありません @@ -7423,7 +7459,7 @@ OKをクリックして、自動調整プロセスを開始します。 GeneralSettings - + Units 単位 @@ -7438,39 +7474,39 @@ OKをクリックして、自動調整プロセスを開始します。カラー配色 - + Stream GCS Position GCSポジションをストリーム - + Mute all audio output すべてのオーディオ出力をミュート - + Clear all settings on next start 次回の開始時にすべての設定を消去 - + Application Load/Save Path アプリケーション読込 / 保存先 - - - + + + Browse 参照 - + Choose the location to save/load files ファイル読込 / 保存先を選択 - + UI Scaling UI 拡大率 @@ -7480,43 +7516,43 @@ OKをクリックして、自動調整プロセスを開始します。全般 - + Save application data to SD Card アプリケーションデータをSDカードに保存 - + <default location> <デフォルト位置> - + Brand Image ブランドイメージ - + Indoor Image 屋内画像 - - + + Choose custom brand image file カスタムブランドイメージファイルを選択 - + Outdoor Image 屋外画像 - + Reset Images 画像をリセット - + Reset リセット @@ -7524,17 +7560,17 @@ OKをクリックして、自動調整プロセスを開始します。 GeoFenceController - + GeoFence supports version %1 ジオフェンスはバージョン %1をサポートしています - + GeoFence polygon not stored as object ジオフェンスポリゴンがオブジェクトとして保存されていません - + GeoFence circle not stored as object ジオフェンスサークルはオブジェクトとして保存されていません @@ -7672,27 +7708,45 @@ OKをクリックして、自動調整プロセスを開始します。 GeoTagController - - Images have alreay been tagged. Existing images will be removed. - 画像は既にタグ付けされています。既存の画像は削除されます。 + + Empty Filename. + Empty Filename. - - The save folder already contains images. + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. + + + + The save folder already contains images. 保存フォルダにはすでに画像が含まれています。 - + Cannot find the image directory. 画像ディレクトリが見つかりません。 - + Couldn't replace the previously tagged images 以前にタグ付けされた画像を置き換えることができませんでした - + Cannot find the save directory. 保存ディレクトリが見つかりません。 @@ -7700,39 +7754,39 @@ OKをクリックして、自動調整プロセスを開始します。 GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. 使われた調査ミッションの画像セットをGPS座標をタグ付けするために使用します。飛行におけるバイナリログと、タグ付けする画像を含むディレクトリを指定する必要があります。 - - + + Select log file ログファイルを選択 - + ULog file (*.ulg) ULogファイル (*.ulg) - + PX4 log file (*.px4log) PX4 ログファイル (*.px4log) - + All Files (*) すべてのファイル (*) - - + + Select image directory 画像ディレクトリを選択 - + (Optionally) Select save directory (オプション) 保存ディレクトリを選択 @@ -7742,22 +7796,22 @@ OKをクリックして、自動調整プロセスを開始します。保存ディレクトリを選択 - + /TAGGED folder in your image folder 画像フォルダ内の /TAGGED フォルダ - + /TAGGED /TAGGED - + Cancel Tagging タグ付けをキャンセル - + Start Tagging タグ付けを開始 @@ -7765,192 +7819,199 @@ OKをクリックして、自動調整プロセスを開始します。 GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format 画像ディレクトリに画像が含まれていない場合は、画像がJPG形式であることを確認してください - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. ジオタグ付けに失敗しました。画像を開くことができません。 - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled タグ付けがキャンセルされました - + Geotagging failed. Couldn't open log file. ジオタグ付けに失敗しました。ログファイルを開くことができません。 - - %1 - tagging cancelled - %1 - タグ付けがキャンセルされました - - - + Log parsing failed ログの解析に失敗しました - - Geotagging failed in trigger filtering - トリガーフィルタリング内のジオタグ付けに失敗しました - - - + Geotagging failed. Requesting image #%1, but only %2 images present. ジオタグ付けに失敗しました。画像 #%1 をリクエストしていますが、存在する画像は %2 だけです。 - - - Geotagging failed. Couldn't write to image. - ジオタグ付けに失敗しました。画像の書き込みができません。 - - - - Geotagging failed. Couldn't write to an image. - ジオタグ付けに失敗しました。画像の書き込みができません。 - GimbalIndicator - - + + Gimbal ジンバル - + <br> Controls コントロール<br> - + Yaw <br> Follow ヨー<br>フォロー - + Yaw <br> Lock ヨー<br>固定 - + Center 中央 - + Tilt 90 傾き 90 - + Point <br> Home ホーム<br>ポイント - + Retract 取り消し - + Release <br> Control コントロール<br>解除 - + Acquire <br> Control コントロール<br>取得 - + Active <br> Gimbal: ジンバル<br>有効 - + Select <br> Gimbal ジンバル<br>選択 - + Settings 設定 - + Control type: コントロールタイプ: - + Horizontal FOV 水平方向 FOV - + Vertical FOV 垂直方向 FOV - + Max speed: 最高速度: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map ジンバル方位計を地図上に表示 - + Use Azimuth instead of local yaw on top toolbar indicator 上部のツールバーインジケータで、ローカル・ヨーの代わりに方位を使用する - + Show Acquire/Release control button コントロール取得 / 解除ボタンを表示 - + Retracted 取り消し - + Yaw locked ヨー・固定 - + Yaw follow ヨー・フォロー - + P: P: - + Az: Az: - + Y: Y: @@ -8064,7 +8125,7 @@ OKをクリックして、自動調整プロセスを開始します。設定位置へ移動 - + Return to the launch position of the vehicle. 機体の離陸位置へ戻ります。 @@ -8119,162 +8180,172 @@ OKをクリックして、自動調整プロセスを開始します。フライトモード設定 - + + Change Heading + Change Heading + + + Arm the vehicle. 機体のアーム - + WARNING: This will force arming of the vehicle bypassing any safety checks. 警告: これにより安全チェックをバイパスして機体のアームが強制されます。 - + Disarm the vehicle 機体のディスアーム - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. 警告: これによりすべてのモーターが停止します。機体が現在飛行中の場合は墜落します。 - + Takeoff from ground and hold position. 地上から離陸し上空でポジションを保持します。 - + Grab or Release the cargo 貨物をつかむ or 離す - + Takeoff from ground and start the current mission. 地上から離陸し現在のミッションを開始します。 - + Continue the mission from the current waypoint. 現在のポイントからミッションを継続します。 - + Upload of resume mission failed. Confirm to retry upload ミッション再開のアップロードに失敗しました。アップロードを再試行するため確認してください - + Land the vehicle at the current position. 機体は現在位置に着陸します。 - + Change the altitude of the vehicle up or down. 機体の高度を上下に変更します。 - + Change the maximum horizontal cruise speed. 水平巡行 最大速度を変更します。 - + Change the equivalent airspeed setpoint 対気速度セットポイントを変更 - + Move the vehicle to the specified location. 指定位置に機体を移動します。 - + Adjust current waypoint to %1. 現在のポイントを %1 に変更します。 - + Orbit the vehicle around the specified location. 指定位置付近で機体をオービットさせます。 - + Abort the landing sequence. 着陸シーケンスを中止します。 - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. 現在位置で一時停止し、必要に応じて高度を上げ下げします。 - + Pause all vehicles at their current position. 現在位置にあるすべての機体を一時停止します。 - + Transition VTOL to fixed wing flight. VTOLを固定翼飛行に移行します。 - + Transition VTOL to multi-rotor flight. VTOLをマルチコプター飛行に移行します。 - + Make the specified location a Region Of Interest. 指定位置を対象領域 (ROI) にします。 - + Set vehicle home as the specified location. This will affect Return to Home position 機体のホームを指定した場所に設定します。これはReturn to Homeポジションに影響します。 - + Make the specified location the estimator origin. 指定した位置を推定元にします。 - + Set the vehicle flight mode to %1 機体フライトモードを %1 に設定 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) 高さ (rel) - + Airspeed 対気速度 - + Speed 速度 - + Alt (rel) 高度 (rel) - + Smart RTL スマートRTL - + Internal error: unknown actionCode 内部エラー: 不明なアクションコード @@ -8314,13 +8385,13 @@ OKをクリックして、自動調整プロセスを開始します。HorizontalFactValueGrid - + + + - - + + - - @@ -8328,99 +8399,119 @@ OKをクリックして、自動調整プロセスを開始します。 InstrumentValue - + None なし - + Color カラー - + Opacity 透過度 - + Icon アイコン InstrumentValueEditDialog - - - Value Display - 値の表示 - Valuec requires a connected vehicle for setup. 値の設定には接続された機体が必要です。 - + Icon アイコン - + Text テキスト - + + + Label ラベル - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size サイズ - + Show Units 単位を表示 - - Range - レンジ + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - 値の範囲に応じて適用する色を指定します。色はアイコンがある場合はそのアイコンに、ない場合は値そのものに適用されます。 + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + 値の範囲に応じて適用する色を指定します。色はアイコンがある場合はそのアイコンに、ない場合は値そのものに適用されます。 - - - + + + Add Row 行を追加 - + Specify the icon you want to display based on value ranges. 値の範囲に応じて表示するアイコンを指定します。 - + Specify the icon opacity you want based on value ranges. アイコンの透過度を値の範囲で指定します。 - + Select Icon アイコンを選択 @@ -8436,152 +8527,152 @@ OKをクリックして、自動調整プロセスを開始します。 Joystick - + No Action アクションなし - + Arm アーム - + Disarm ディスアーム - + Toggle Arm アーム切替 - + VTOL: Fixed Wing VTOL: 固定翼機 - + VTOL: Multi-Rotor VTOL: マルチコプター - + Continuous Zoom In 連続ズームイン - + Continuous Zoom Out 連続ズームアウト - + Step Zoom In ステップズームイン - + Step Zoom Out ステップズームアウト - + Trigger Camera カメラトリガー - + Start Recording Video ビデオ録画を開始 - + Stop Recording Video ビデオ録画を停止 - + Toggle Recording Video ビデオ録画 切替 - + Gimbal Down ジンバル 下 - + Gimbal Up ジンバル 上 - + Gimbal Left ジンバル 左 - + Gimbal Right ジンバル 右 - + Gimbal Center ジンバル 中央 - + Gimbal Yaw Lock ジンバル ヨー・固定 - + Gimbal Yaw Follow ジンバル ヨー・フォロー - + Emergency Stop 緊急停止 - + Gripper Close グリッパー 閉じる - + Gripper Open グリッパー 開く - + Landing gear deploy ランディングギア 展開 - + Landing gear retract ランディングギア 格納 - + Next Video Stream 次のビデオ ストリーム - + Previous Video Stream 前のビデオ ストリーム - + Next Camera 次のカメラ - + Previous Camera 前のカメラ @@ -8752,7 +8843,7 @@ OKをクリックして、自動調整プロセスを開始します。 JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. %1 つのジョイスティック軸を検出しました。PX4を操作するには少なくとも %2 つの軸が必要です。 @@ -8818,29 +8909,29 @@ OKをクリックして、自動調整プロセスを開始します。 JoystickIndicator - + Joystick Status ジョイスティック状態 - + Connected: 接続済み: - - + + Yes はい - - + + No いいえ - + Enabled: 有効: @@ -8928,12 +9019,12 @@ OKをクリックして、自動調整プロセスを開始します。 LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 はこの複雑なミッション項目タイプの読み込みをサポートしていません: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. 固定翼機 着陸パターン: ロイター設定および着陸高度設定を、相対高度と異なる設定での定義はサポートされなくなりました。両方とも相対高度に設定されています。必ず飛行前計画の調整 / 確認を行ってください。 @@ -8941,12 +9032,12 @@ OKをクリックして、自動調整プロセスを開始します。 LinkInterface - + Signing Failure 署名の失敗 - + Signing signature mismatch 署名が一致しません @@ -8954,51 +9045,55 @@ OKをクリックして、自動調整プロセスを開始します。 LinkManager - + Connect not allowed: %1 接続できません: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (自動接続) - + Shutdown シャットダウン - + Serial シリアル - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link 擬似リンク - + AirLink AirLink - - + + Log Replay ログの再生 @@ -9006,12 +9101,12 @@ OKをクリックして、自動調整プロセスを開始します。 LinkSettings - + Add 追加 - + Connect 接続 @@ -9021,93 +9116,123 @@ OKをクリックして、自動調整プロセスを開始します。自動接続 - + Pixhawk Pixhawk - + SiK Radio SiK 送信機 - - PX4 Flow - PX4 フロー - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links リンク - + Delete Link リンクを削除 - + Are you sure you want to delete '%1'? 本当に '%1' を削除してもよろしいですか？ - + Disconnect 切断 - - + + Add New Link 新規リンクを追加 - + Edit Link リンクを編集 - + Name 名前 - + Enter name 名前を入力 - + Automatically Connect on Start 開始時に自動的に接続 - + High Latency 高遅延 - + Type タイプ @@ -9115,216 +9240,165 @@ OKをクリックして、自動調整プロセスを開始します。 LogDownloadController - + Available 利用可能です - - + Canceled キャンセルしました - - - + + Error エラー - + Downloaded ダウンロード完了 - - Timed Out - タイムアウト - - - + Waiting 待機中 - - - UnknownDate - 日付不明 - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. ログのダウンロードを使用すると機体からバイナリーログファイルをダウンロードできます。【更新】をクリックして使用可能なログのリストを取得します。 - + Id ID - + Date 日付 - + Date Unknown 不明な日付 - + Size サイズ - + Status 状態 - + Refresh 更新 - + Log Refresh ログの更新 - + You must be connected to a vehicle in order to download logs. ログをダウンロードするには機体に接続する必要があります。 - + Download ダウンロード - + Log Download ログ ダウンロード - + You must select at least one log file to download. ダウンロードするログファイルを少なくとも1つ選択してください。 - + Select save directory 保存ディレクトリを選択 - + Erase All すべて消去 - + Delete All Log Files すべてのログファイルを削除 - + All log files will be erased permanently. Is this really what you want? すべてのログファイルは完全に消去されます。本当によろしいですか？ - + Cancel 取消 - LogReplayLink - - - Log Replay Error - ログ再生エラー - - - - You must close all connections prior to replaying a log. - ログを再生する前にすべての接続を閉じる必要があります。 - - - - Attempt to load new log while log being played - ログ再生中に新しいログを読み込もうとしています - - - - Unable to open log file: '%1', error: %2 - ログファイルを開けません: '%1', エラー: %2 - - - - The log file '%1' is corrupt or empty. - ログ ファイル '%1' が破損もしくは空です。 - - - - Connect not allowed during Flight Data replay. - 飛行データの再生中は接続できません。 - - - - - Unable to seek to new position - 新しいポジションを探すことができません - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings - ログ再生リンクの設定 + Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File ログファイル - + Browse 参照 - + Select Telemetery Log テレメトリーログを選択 - + Telemetry Logs (*.%1) テレメトリーログ (*.%1) - + All Files (*) すべてのファイル (*) @@ -9357,180 +9431,214 @@ OKをクリックして、自動調整プロセスを開始します。すべてのファイル (*) - + Pause 一時停止 - + Play 再生 - + Load Telemetry Log テレメトリログの読み込み - + Close 閉じる + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro ジャイロ - + Accelerometer 加速度センサ - + Magnetometer 磁気センサ - + Absolute pressure 絶対気圧 - + Differential pressure 差圧状態 - + GPS GPS - + Optical flow オプティカルフロー - + Computer vision position ビジョンポジショニング - + Laser based position レーザーを使ったポジション - + External ground truth 外部からの正確な情報 - + Angular rate control 角速度レート制御 - + Attitude stabilization 機体姿勢 安定化 - + Yaw position ヨーポジション - + Z/altitude control Z / 高度制御 - + X/Y position control X / Y ポジション制御 - + Motor outputs / control モーター 出力 / 制御 - + RC receiver RC 受信機 - + Gyro 2 ジャイロ 2 - + Accelerometer 2 加速度センサ2 - + Magnetometer 2 磁気センサ2 - + GeoFence ジオフェンス - + AHRS AHRS - + Terrain 地形 - + Motors reversed モーター リバース - + Logging ロギング - + Battery バッテリー - + Proximity 近接 - + Satellite Communication 衛星通信 - + Pre-Arm Check プレアーム チェック - + Avoidance/collision prevention 回避 / 衝突防止 - + Propulsion 推進 @@ -9538,7 +9646,7 @@ OKをクリックして、自動調整プロセスを開始します。 MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor 不明なセンサ @@ -9559,17 +9667,17 @@ OKをクリックして、自動調整プロセスを開始します。 MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. 機体のシステムshellへの接続を提供します。 - + Enter Commands here... ここにコマンドを入力... - + Send 送信 @@ -9577,79 +9685,79 @@ OKをクリックして、自動調整プロセスを開始します。 MAVLinkInspectorController - + 5 Sec 5 秒 - + 10 Sec 10 秒 - + 30 Sec 30 秒 - + 60 Sec 60 秒 - + Auto 自動 - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 システム %1 @@ -9795,113 +9903,100 @@ OKをクリックして、自動調整プロセスを開始します。 MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink プロトコル - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLinkのログ記録に失敗しました。ファイル %1に書き込めませんでした。ログを無効にしました。 - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - MAVLink V2.0が有効なリンクで、まだMAVLink V1.0を使用している送信機を検出しました。送信機のファームウェアをアップグレードしてください。 + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink プロトコル + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - 書き込み用の飛行データファイルを開けませんでした。%1 への書き込みができません。別のファイルの場所を選択してください。 + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? 機体への接続はまだ有効です。本当に終了しますか？ - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? 保存 / 送信されていない編集中のミッションがあります。終了すると変更内容が失われます。本当に終了してもよろしいですか？ - - + + Analyze Tools 解析ツール - - + + Vehicle Setup 機体設定 - - + + Application Settings アプリケーション設定 - + + Close %1 %1 を閉じる - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? 機体パラメータの更新を保留中です。閉じると変更が失われます。閉じてもよろしいですか？ - + Vehicle Error 機体エラー - + Additional errors received 追加エラーを受信しました - + %1 Version %1 バージョン - + Debug Touch Areas タッチエリアのデバッグ - + Touch Area display toggled タッチエリアの表示切り替え - - + + Advanced Mode 詳細モード - + Turn off Advanced Mode? 詳細設定モードをOFFにしますか？ - + Back 戻る @@ -10053,37 +10148,32 @@ OKをクリックして、自動調整プロセスを開始します。自動接続 - + Pixhawk Pixhawk - + SiK Radio SiK 送信機 - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10116,17 +10206,12 @@ OKをクリックして、自動調整プロセスを開始します。 ft - - T - T - - - + + + - + - - @@ -10134,162 +10219,167 @@ OKをクリックして、自動調整プロセスを開始します。 MapSettings - + Provider プロバイダ - + Type タイプ - + + Elevation Provider + Elevation Provider + + + Offline Maps オフラインマップ - + Download map tiles for use when offline オフライン時に使用するマップタイルのダウンロード - + Add New Set 新しいセットを追加 - + Add 追加 - + Import Map Tiles マップタイルをインポート - + Import インポート - + Export Map Tiles マップタイルをエクスポート - + Export エクスポート - + Exporting エクスポート中 - + Importing - + Tokens トークン - + Allows access to additional providers 追加プロバイダへのアクセスを許可 - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox ログイン - + Account アカウント - + Map Style マップスタイル - + Custom Map URL カスタムマップ URL - + URL with {x} {y} {z} or {zoom} substitutions {x} {y} {z} または {zoom} 置換URL - + Server URL サーバ URL - + Tile Cache タイルキャッシュ - + Tile Sets (*.%1) タイルセット (*.%1) - + Export Selected Tile Sets 選択したタイルセットをエクスポート - + Export Tiles タイルをエクスポート - + Import TileSets タイルセットをインポート - + Import Tiles タイルをインポート - + Append to existing sets 既存のセットに追加 - + Replace existing sets 既存のセットに交換 - + Error Message エラーメッセージ @@ -10323,7 +10413,7 @@ OKをクリックして、自動調整プロセスを開始します。 MissionCommandTree - + All commands すべてのコマンド @@ -10389,43 +10479,43 @@ OKをクリックして、自動調整プロセスを開始します。 MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ？ - + Move to vehicle position 機体位置を移動 - + Move to previous item position 前の項目のポジションに移動 - + Edit position... ポジションを編集... - + Show all values すべての値を表示 - + Mission Edit ミッション編集 - + You have made changes to the mission item which cannot be shown in Simple Mode 簡易モードでは表示できないミッション項目の変更を行います - + Item #%1 項目 #%1 @@ -10441,7 +10531,7 @@ OKをクリックして、自動調整プロセスを開始します。 MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. MAV_CMD_DO_JUMPコマンドにより、帰還ミッションを生成できません。 @@ -10592,19 +10682,6 @@ OKをクリックして、自動調整プロセスを開始します。擬似リンク設定 - - ModeSwitchDisplay - - - Monitor: - モニター: - - - - Threshold: - しきい値: - - MotorAssignment @@ -10732,439 +10809,114 @@ Do you wish to proceed? - Mission - ミッション - - - - Please confirm mission is valid (waypoints valid, no terrain collision). - ミッションが有効であることを確認してください。(ポイント有効、地形衝突なし) - - - - Last preparations before launch - 離陸前の最終確認 - - - - Payload - ペイロード - - - - Configured and started? Payload lid closed? - 設定し起動しましたか？コンテナの蓋は閉まっていますか？ - - - - Wind & weather - 風と天気 - - - - OK for your platform? - この滑走路でOKですか？ - - - - Flight area - 飛行エリア - - - - Launch area and path free of obstacles/people? - 離陸エリアと周囲の道に障害物や人はいませんか？ - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - 以下のコマンドはすべての機体に適用されます - - - - - Pause - 一時停止 - - - - - Start Mission - ミッション開始 - - - - Armed - アームしました - - - - Disarmed - ディスアームしました - - - - Arm - アーム - - - - RTL - RTL - - - - Take control - コントロールする - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - 警告: 機体は %1 と同じシステムIDを使用しています: %2 - - - - Connected to Vehicle %1 - 機体 %1 に接続しました - - - - MultiVehicleSelector - - - Vehicle - 機体 - - - - OfflineMap - - - Error Message - エラーメッセージ - - - - Max Cache Disk Size (MB): - 最大キャッシュディスクサイズ (MB): - - - - Max Cache Memory Size (MB): - 最大キャッシュメモリサイズ (MB): - - - - Memory cache changes require a restart to take effect. - メモリキャッシュ変更を有効にするには再起動が必要です。 - - - - Mapbox Access Token - Mapboxアクセストークン - - - - To enable Mapbox maps, enter your access token. - Mapboxを有効にするにはアクセストークンを入力してください。 - - - - Mapbox User Name - Mapboxユーザ名 - - - - To enable custom Mapbox styles, enter your account name. - カスタムMapboxスタイルを有効にするにはユーザ名を入力してください。 - - - - Mapbox Style ID - MapboxスタイルID - - - - To enable custom Mapbox styles, enter your style ID. - カスタムMapboxスタイルを有効にするにはスタイルIDを入力してください。 - - - - Esri Access Token - ESRIアクセストークン - - - - To enable Esri maps, enter your access token. - ESRIマップを有効にするには、アクセストークンを入力してください。 - - - - VWorld Access Token - VWorldアクセストークン - - - - To enable VWorld maps, enter your access token. - VWorldマップを有効にするにはアクセストークンを入力してください。 - - - - Custom Map URL - カスタムマップ URL - - - - URL with {x} {y} {z} or {zoom} substitutions - {x} {y} {z} または {zoom} 置換URL - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - 自分で作成したタイルセットも含め、すべてのタイルが削除されます。 - -本当によろしいですか？ - - - - Delete %1 and all its tiles. - -Is this really what you want? - %1 とそのタイルをすべて削除します。 - -本当よろしいですか？ - - - - System Wide Tile Cache - システム全体のタイルキャッシュ - - - - Zoom Levels: - ズームレベル: - - - - Total: - 合計: - - - - Unique: - 固有 (Unique): - - - - Downloaded: - ダウンロード完了: - - - - Error Count: - エラー数: - - - - Size: - サイズ: - - - - - Tile Count: - タイル数: - - - - Resume Download - ダウンロード再開: - - - - Cancel Download - ダウンロード キャンセル - - - - Delete - 削除 - - - - Map Tile Set import Progress - マップタイルセットのインポートの進捗状況 - - - - Map Tile Set import Completed - マップタイルセットのインポートが完了しました - - - - import Tile - タイルをインポート - - - - Confirm Delete - 削除の確認 - - - - Tile Sets (*.%1) - タイルセット (*.%1) - - - - Ok - OK - - - - - - Close - 閉じる - - - - - - - Cancel - キャンセル - - - - Show zoom previews - ズーム時のプレビューを表示 - - - - Min Zoom: %1 - 最小ズーム: %1 - - - - Max Zoom: %1 - 最大ズーム: %1 - - - - - Add New Set - 新しいセットを追加 - - - - Name: - 名前: + Mission + ミッション - - Map type: - マップのタイプ: + + Please confirm mission is valid (waypoints valid, no terrain collision). + ミッションが有効であることを確認してください。(ポイント有効、地形衝突なし) - - Fetch elevation data - 標高データを取得 + + Last preparations before launch + 離陸前の最終確認 - - Min/Max Zoom Levels - 最小 / 最大ズームレベル + + Payload + ペイロード - - Est Size: - ESTサイズ: + + Configured and started? Payload lid closed? + 設定し起動しましたか？コンテナの蓋は閉まっていますか？ - - Too many tiles - タイルが多すぎます + + Wind & weather + 風と天気 - - Download - ダウンロード + + OK for your platform? + この滑走路でOKですか？ - - - Import - インポート + + Flight area + 飛行エリア - - - Export - エクスポート + + Launch area and path free of obstacles/people? + 離陸エリアと周囲の道に障害物や人はいませんか？ + + + MultiVehicleList - - Options - オプション + + The following commands will be applied to all vehicles + 以下のコマンドはすべての機体に適用されます - - Offline Maps Options - オフラインマップ オプション + + + Pause + 一時停止 - - Select Tile Sets to Export - エクスポートするタイルセットを選択 + + + Start Mission + ミッション開始 - - Select All - すべて選択 + + Armed + アームしました - - Select None - 選択しない + + Disarmed + ディスアームしました - - Export Tile Set - タイルセットをエクスポート + + Arm + アーム - - Tile Set Export Progress - タイルセットのエクスポート進行状況 + + RTL + RTL - - Tile Set Export Completed - タイルセットのエクスポート完了 + + Take control + コントロールする + + + MultiVehicleManager - - Map Tile Set Import - マップタイルセットのインポート + + Warning: A vehicle is using the same system id as %1: %2 + 警告: 機体は %1 と同じシステムIDを使用しています: %2 - - Append to existing set - 既存のセットに追加 + + Connected to Vehicle %1 + 機体 %1 に接続しました + + + MultiVehicleSelector - - Replace existing set - 既存のセットに交換 + + Vehicle + 機体 @@ -11356,6 +11108,14 @@ Is this really what you want? 機体 + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11436,29 +11196,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - バッテリー低下 + Low Battery Failsafe + Low Battery Failsafe - + + Action + Action + + + Warning Level 警告レベル - - Failsafe Level - フェイルセーフレベル + + Critical Level + Critical Level - + Emergency Level 緊急レベル - - - Failsafe Action - フェールセーフアクション - PX4FirmwarePlugin @@ -11553,47 +11313,52 @@ Is this really what you want? オービット - + Unknown %1:%2 不明な %1:%2 - + Unable to takeoff, vehicle position not known. 離陸することができません。機体位置が不明です。 - + Unable to go to location, vehicle position not known. 位置の移動ができません。機体位置が不明です。 - + Unable to pause vehicle. 機体を一時停止できません。 - + Unable to change altitude, home position unknown. 高度を変更することができません。ホーム位置が不明です。 - + Unable to change altitude, home position altitude unknown. 高度を変更することができません。ホーム位置の高度が不明です。 - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. ミッションを開始できませんでした。機体がアームを拒否しました。 - + Unable to start mission: Vehicle not changing to %1 flight mode. ミッションを開始できません: 機体が %1 の飛行モードに変更されていません。 - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControlはPX4 Proファームウェアバージョン %1.%2.%3 以上をサポートしています。それ以前のバージョンを使用しているため予期しない結果を招く場合があります。ファームウェアをアップグレードしてください。 @@ -11722,269 +11487,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL 高度 - + Land Descent Rate 着陸降下レート - - Precision Landing - 高精度着陸 - - - - Overall Responsiveness - 全体的な応答 - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - 値が大きいほど機体の反応が速くなります。応答性の遅さと最大速度の高さが重なるような組み合わせは、制動距離が長くなるので注意が必要です。 - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - 警告: 高い応答性を得るには、推力重量比の大きい機体が必要です。そうでない場合、機体は高度が低下する可能性があります。 - - - - Overall Horizontal Velocity (m/s) - 全体水平速度 (m/s) - - - - Overall Vertical Velocity (m/s) - 全体垂直速度 (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - ミッション旋回半径 + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - この値を大きくすると、ミッションにおける曲がり角はなだらかに曲がります。(コーナーカット) 正確なコーナートラッキングをするためには、最小値を使用してください。 + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink ログ - + Please enter an email address before uploading MAVLink log files. MAVLinkログファイルをアップロードする前にメールアドレスを入力してください。 - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 ログ (PX4 Proのみ) - + Manual Start/Stop: 手動開始 / 停止: - + Start Logging ログ開始 - + Stop Logging ログ終了 - + Enable automatic logging 自動ログ取得を有効 - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 ログアップロード(PX4 Proのみ) - + Email address for Log Upload: ログアップロード用メールアドレス: - + Default Description: 既定の説明: - + Default Upload URL 既定のアップロードURL - + Video URL: 動画 URL: - + Wind Speed: 風速: - - + + Please Select 選択してください - + Calm 穏やか - + Breeze 風あり - + Gale 突風 - + Storm Storm - + Flight Rating: 飛行評価: - + Crashed (Pilot Error) クラッシュしました (パイロットエラー) - + Crashed (Software or Hardware issue) クラッシュしました（ソフトor ハード問題） - + Unsatisfactory 不十分 - + Good 良好 - + Great 最良 - + Additional Feedback: 追加のフィードバック: - + Make this log publicly available このログを公開 - + Enable automatic log uploads ログの自動アップロード 有効 - + Delete log file after uploading アップロード後にログファイルを削除 - + Saved Log Files ログファイルを保存しました - + Uploaded アップロード完了 - + Check All すべてチェック - + Check None チェックなし - + Delete Selected 選択したものを削除 - + Delete Selected Log Files 選択したログファイルを削除 - + Confirm deleting selected log files? 選択したログファイルを削除してもよろしいですか？ - + Upload Selected 選択したものをアップロード - + Upload Selected Log Files 選択したログファイルをアップロード - + Confirm uploading selected log files? 選択したログファイルをアップロードしてもよろしいですか？ - + Cancel キャンセル - + Cancel Upload アップロードをキャンセル - + Confirm canceling the upload process? アップロード処理をキャンセルしてもよろしいですか？ @@ -11993,18 +11730,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - 地上管制データリンク損失 + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - フェールセーフアクション + Action + Action - - Data Link Loss Timeout - データリンク損失 タイムアウト + + Loss Timeout + Loss Timeout @@ -12754,78 +12491,78 @@ Is this really what you want? ParameterEditor - - Search: - 検索: - - - + Clear 消去 - + Show modified only 変更のみを表示 - + Tools ツール - + Refresh 更新 - + Reset all to firmware's defaults すべての値をファームウェアのデフォルト値にリセット - - + + Reset All すべてリセット - + Reset to vehicle's configuration defaults 機体を初期設定にリセット - + Load from file... ファイルから読み込み… - + Load Parameters パラメータの読み込み - + Save to file... ファイルに保存... - + Save Parameters パラメータを保存 - + Clear all RC to Param すべての送信機パラメータを消去 - + All Files (*) すべてのファイル (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12834,23 +12571,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al これにより、UAVCANノード、すべての機体設定、設定全般、キャリブレーションなどすべてが完全にリセットされるのでご注意ください。 - - + + Reboot Vehicle 機体 再起動 - + Parameter Files (*.%1) パラメータファイル (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. 【リセット】を選択すると、すべてのパラメータが機体設定のデフォルト値にリセットされます。 - + Select Ok to reboot vehicle. 【OK】を選択すると機体が再起動します。 @@ -12858,12 +12595,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 ファイルを作成できません: %1 - + Unable to open file: %1 ファイルが開きません: %1 @@ -12871,72 +12608,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - パラメータエディタ - - - + Reset To Default 初期設定にリセット - + Min: 最小: - + Max: 最大: - + Default: デフォルト: - - Parameter name: - パラメータ名: + + Value Editor + Value Editor - + Vehicle reboot required after change 変更後に機体の再起動が必要です - + Application restart required after change 変更後にアプリケーションの再起動が必要です - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. 警告: 飛行中に機体の値を変更すると、不安定になり機体ロストしてしまう可能性があります。 - + Make sure you know what you are doing and double-check your values before Save! 保存する前に何をしているのかをチェックし、値を再確認してください！ - + Force save (dangerous!) 強制的に保存 (危険！) - + Advanced settings 詳細設定 - + Manual Entry 手動入力 - + Set RC to Param 送信機パラメータを設定 @@ -12944,39 +12676,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 パラメータの書き込みに失敗しました: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 パラメータの読み込みに失敗しました: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed パラメータキャッシュのCRC一致に失敗しました - + Parameters not loaded since they are not currently on the vehicle: %1 パラメータは現在機体に搭載されていないため読み込まれませんでした: %1 - + Parameters not loaded due to type mismatch: %1 タイプが一致しないため、パラメータが読み込まれません: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 は機体 %2 からパラメータのフルセットを取得できませんでした。これにより %1 は完全なユーザインタフェースを表示できなくなります。修正されたファームウェアを使用している場合は、問題を解決するために機体の起動エラーを解決する必要があります。標準のファームウェアを使用している場合は、問題を解決するために新しいバージョンにアップグレードする必要があります。 - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. 機体 %1 はパラメータのリクエストに応答しませんでした。これにより %2 はその完全なユーザインタフェースを表示できなくなります。 @@ -13122,178 +12854,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone ミッション項目の通信中に内部エラーが発生しました: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. ミッションのリスト要求に失敗しました。最大再試行回数を超えました。 - + Retrying %1 REQUEST_LIST retry Count 再試行 %1 REQUEST_LIST 再試行回数 - + Mission read failed, maximum retries exceeded. ミッションの読み込みに失敗しました。最大再試行回数を超えました。 - + Retrying %1 MISSION_REQUEST retry Count 再試行 %1 MISSION_REQUEST 再試行回数 - + Mission write failed, vehicle failed to send final ack. ミッションの書き込みに失敗しました。機体は最終的なACKを送信できませんでした。 - + Mission write mission count failed, maximum retries exceeded. ミッションの書き込みミッションカウントに失敗しました。最大再試行回数を超えました。 - + Vehicle did not request all items from ground station: %1 機体がグランドステーションの全ての項目を要求しませんでした: %1 - + Mission remove all, maximum retries exceeded. ミッションをすべて削除します。最大再試行回数を超えました。 - + Retrying %1 MISSION_CLEAR_ALL retry Count 再試行 %1 MISSION_CLEAR_ALL 再試行回数 - + Vehicle did not respond to mission item communication: %1 ミッション項目の通信に機体が応答しませんでした: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read 内部エラー: 読み込むインデックスがない状態での機体 _requestNextMissionItem の呼び出し - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. 機体が範囲外の項目を要求しました。count:request %1:%2. 機体への送信に失敗しました。 - + Vehicle remove all failed. Error: %1 機体の削除にすべて失敗しました。エラー: %1 - + Item #%1 Command: %2 項目 #%1 コマンド: %2 - + Frame: %1 フレーム:%1 - - - - - - - + + + + + + + Value: %1 値: %1 - + Mission accepted. ミッションが承認されました。 - + Unspecified error. 不明なエラーです。 - + Coordinate frame is not supported. 座標枠はサポートされていません。 - + Command is not supported. コマンドはサポートされていません。 - + Mission item exceeds storage space. ミッション項目がストレージ容量を超えています。 - + One of the parameters has an invalid value. パラメータの1つに無効な値があります。 - + Param 1 invalid value. Param1の値が無効です。 - + Param 2 invalid value. Param2の値が無効です。 - + Param 3 invalid value. Param3の値が無効です。 - + Param 4 invalid value. Param4の値が無効です。 - + Param 5 invalid value. Param5の値が無効です。 - + Param 6 invalid value. Param6の値が無効です。 - + Param 7 invalid value. Param7の値が無効です。 - + Received mission item out of sequence. ミッション項目を順不同で受信しました。 - + Not accepting any mission commands. ミッションコマンドを一切受け付けません。 - + Unknown error: %1. 不明なエラー: %1 - + Vehicle returned error: %1. %2Vehicle did not accept guided item. 機体はエラーを返しました: %1。%2 機体はガイド補助された項目を受け入れませんでした。 @@ -13345,27 +13077,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint ポイントを選択しました - + Alt diff: 高度の差異: - + Azimuth: 方位: - + Distance: 距離: - + Gradient: 傾斜度: @@ -13381,47 +13113,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: ヘッディング: - + Total Mission ミッション合計 - + Max telem dist: 最大テレメトリー距離: - + Time: 時間: - + Battery バッテリー - + Batteries required: バッテリーが必要: - + Upload Required アップロードが必要 - + Upload アップロード @@ -13434,122 +13166,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al 機体はアームしています。ミッションを機体にアップロードしますか？ - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? ミッション項目のデフォルト高度を変更しました。その高度を、現在のミッションのすべてのアイテムに適用しますか？ - + You need at least one item to create a KML. KMLを作成するには最低でも1つ以上の項目が必要です。 - + Plan is waiting on terrain data from server for correct altitude values. プランは正しい高度の値を取得するために、サーバからの地形データを待機をしています。 - + Plan Upload プラン アップロード - + Select Plan File プランファイルを選択 - + Save Plan プランを保存 - + Save KML KMLを保存 - + File ファイル - + Waypoint ポイント - + ROI ROI - + Pattern パターン - + Center 中央 - + Plan プラン - + Apply new altitude 新しい高度を適用 - + Plan View - Vehicle Disconnected プランビュー - 機体が切断されました - + Plan View - Vehicle Changed プランビュー - 機体を変更しました - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? プランビューの、プランに関連付けられた機体が使用できなくなりました。そのプランで何をしたいですか？ - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? プランビューで作業しているプランは、現在の機体のものではありません。そのプランで何をしたいですか？ - + Discard Unsaved Changes 保存されていない変更を破棄します - + Discard Unsaved Changes, Load New Plan From Vehicle 保存されていない変更を破棄し、機体から新しいプランを読み込みます - + Load New Plan From Vehicle 機体から新しいプランを読み込み - + Keep Current Plan 現在のプランを維持します - + Keep Current Plan, Don't Update From Vehicle 現在のプランを維持し、機体からのアップデートは行いません - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13558,191 +13290,181 @@ Click 'Ok' to upload the Plan anyway. プランをアップロードするには【OK】をクリックしてください。 - + Send To Vehicle 機体に送信 - + Current mission must be paused prior to uploading a new Plan 新しいプランをアップロードする前に、現在のミッションを一時停止する必要があります。 - + Fly 飛行 - + Takeoff 離陸 - + Rally Point ポイント - + Cancel ROI ROI キャンセル - + Return 戻る - + Land 着陸 - - + + Mission ミッション - + Fence フェンス - - + + Rally ポイント - + UTM-Adapter UTM-アダプター - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? 保存されていない / 未送信の変更があります。機体から読み込まれるとこれらの変更が失われます。本当に機体から読み込んでもよろしいですか？ - - Status - 状態 - - - - Status Error - 状態エラー - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? 保存されていない / 未送信の変更があります。ファイルから読み込まれるとこれらの変更が失われます。本当にファイルから読み込んでもよろしいですか？ - - + + Clear 消去 - + Are you sure you want to remove all mission items and clear the mission from the vehicle? すべてのミッション項目を削除し、機体からミッションを消去してもよろしいですか？ - + Create complex pattern: 複雑なパターンを作成: - + You have unsaved changes. 変更は保存されていません。 - + Open... 開く... - - - + + + Save 保存 - - + + Unable to %1 %1 にはできません - + Plan has incomplete items. Complete all items and %1 again. プランに不完全な項目があります。すべての項目を完成させ再度 %1 を入力してください。 - + Are you sure you want to remove current plan and create a new plan? 現在のプランを削除し、新しいプランを作成してもよろしいですか？ - + Plan overwrite プランの上書き - + You have unsaved changes. You should upload to your vehicle, or save to a file. 変更が保存されていません。機体にアップロードするか、ファイルに保存する必要があります。 - - + + Create Plan プランを作成 - + Storage ストレージ - + Save As... 名前を付けて保存... - + Save Mission Waypoints As KML... ミッションポイントをKMLとして保存... - + KML KML - - - + + + Upload アップロード - + Vehicle 機体 - + Download ダウンロード @@ -13788,34 +13510,6 @@ Click 'Ok' to upload the Plan anyway. クリックして非表示 - - PolygonEditor - - - Click to add point %1 - クリックしてポイントを追加 %1 - - - - - Right Click to end polygon - - 右クリックでポリゴン終了 - - - - Click to add point - クリックしてポイントを追加 - - - - Click to add point - Right Click to end polygon - クリックしてポイントを追加 - 右クリックでポリゴン終了 - - - - Adjust polygon by dragging corners - 角をドラッグしてポリゴンを調整 - - PowerComponent @@ -14370,44 +14064,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> 現在のユーザはシリアルデバイスにアクセスするための適切な権限を持っていません。また、modemmanagerも干渉するため削除する必要があります。<br/><br/>Ubuntuを使用している場合は、以下のコマンドを実行してこれらの問題を解決してください。<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. 保存した設定 %1 のフォーマットが変更されました。保存された設定がデフォルト値にリセットされました。 - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - テレメトリーログを保存できません。'%1'にテレメトリーをコピー中にエラーが発生しました: '%2' - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 ファームウェアにパラメータがありません。完全にサポートされていないバージョンのファームウェアを適用しているか、ファームウェアにバグがある可能性があります。Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. %1 の新しいバージョンがあります。 %2 からダウンロードできます。 - + New Version Available 新しいバージョンが利用可能です + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - テレメトリーログを保存できません。アプリケーションの保存ディレクトリが設定されていません。 - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - テレメトリーログを保存できません。テレメトリー保存ディレクトリ "%1" が存在しません。 + + Database Not Initialized + Database Not Initialized @@ -14421,32 +14108,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration バイブ機能 - + Log Download ログ ダウンロード - + GeoTag Images ジオタグ画像 - + MAVLink Console MAVLink コンソール - + MAVLink Inspector MAVLink インスペクタ - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? 警告: 詳細モードに入ろうとしています。誤った設定をすると機体が故障し保証が受けられなくなることがあります。カスタマーサポートからの指示があった場合のみ実施してください。詳細モードを有効にしてもよろしいですか？ @@ -14504,178 +14191,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. 書き込み可能なダウンロード先を見つけることができません。ダウンロードとテンポラリディレクトリを確認ください。 - + Could not save downloaded file to %1. Error: %2 ダウンロードしたファイルを %1に保存できませんでした。エラー: %2 - + Download cancelled ダウンロードがキャンセルされました - + Error: File Not Found エラー: ファイルが見つかりません - + Error during download. Error: %1 ダウンロード中にエラーが発生しました。エラー: %1 - - QGCLogEntry - - - Pending - 保留中 - - QGCMAVLink - + Generic micro air vehicle 汎用マイクロ機体 - + Fixed wing aircraft 固定翼機 - + Quadrotor クワッドコプター - + Coaxial helicopter 同軸型ヘリコプター - + Normal helicopter with tail rotor. テールローター通常型ヘリコプター - + Ground installation 地上へ設置 - + Operator control unit / ground control station オペレータコントロールユニット / 地上管制ステーション - + Airship, controlled 飛行船, 制御可能 - + Free balloon, uncontrolled 気球, 制御不能 - + Rocket ロケット - + Ground rover グランドローバー - + Surface vessel, boat, ship 水上艦, ボート, 船舶 - + Submarine 潜水艦 - + Hexarotor ヘキサコプター - + Octorotor オクトコプター - + trirotor トライコプター - + Flapping wing 羽ばたき翼機 - + Kite 凧・カイト - + Onboard companion controller オンボードコンパニオンコントローラ - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter 垂直飛行でコントロールサーフェスを使用したVTOLバイコプター。※テールシッター - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter 垂直飛行でV字型クワッドコプター構成を使用したVTOLクワッドコプター。※テールシッター - + Tiltrotor VTOL VTOL チルトコプター - + VTOL Fixedrotor VTOL 固定翼機 - + VTOL Tailsitter VTOL テールシッター - + VTOL Tiltwing VTOL チルトウィング - + VTOL reserved 5 VTOL予約 5 - + Onboard gimbal オンボードジンバル - + Onboard ADSB peripheral オンボードADSB周辺機器 @@ -14683,24 +14362,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All すべてのコンポーネント - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - オフライン地図キャッシュデータベースがアップグレードされました。古い地図キャッシュ設定はリセットされました。 - - QGCMapPolygonVisuals @@ -14829,83 +14500,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok OK - - + + Open 開く - + Save 保存 - + Apply 適用 - + Save All すべて保存 - + Yes はい - + Yes to All すべて『はい』 - + Retry 再試行 - + Reset リセット - + Restore to Defaults 初期設定に戻す - + Ignore 無視 - + Cancel キャンセル - + Close 閉じる - + No いいえ - + No to All すべて『いいえ』 - + Abort 中止 @@ -14913,60 +14584,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ？ + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32ビット - + 64 bit 64ビット - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain 地形計算 - + Mixed Modes ミックスモード - + (TerrF) (TerrF) - + Relative To Launch 離陸地点の影響 - + Terrain Frame 地形フレーム @@ -14974,46 +14701,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - 不明 - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. 機体はガイド補助モードをサポートしていません。 - - - Follow Me - フォローミー - The following required keys are missing: %1 @@ -15097,25 +14789,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status 送信機 RSSI状態 - - RC RSSI Data Unavailable - RC RSSIデータ利用不可 - - - - N/A - No data available - 該当なし - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15203,8 +14884,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: 以下から受信機タイプを選択してください: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. スティックを中央に合わせスロットルを最下位にし、OKを押してトリムをコピーします。OKを押した後、送信機のトリムをゼロに戻します。 @@ -15320,18 +15012,18 @@ Click 'Ok' to upload the Plan anyway. Spektrumバインド - - + + Copy Trims トリムをコピー - + Mode 1 モード1 - + Mode 2 モード2 @@ -15437,17 +15129,17 @@ Click Next to continue 【次へ】をクリックして続行します。 - + Next 次へ - + Calibrate キャリブレーション - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15459,12 +15151,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 ポイント: %1 - + Rally Points supports version %1 ポイントはバージョン %1 をサポートしています @@ -15507,193 +15199,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status リモートID状態 - + ARM STATUS アーム状態 - + RID COMMS RID COMMS - + NOT CONNECTED 接続されていません - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID オペレータ ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel 【緊急事態が宣言されました】3秒間長押しするとキャンセルされます。 - + Press and Hold below button to declare emergency 下のボタンを長押しして緊急事態を宣言 - + Clear Emergency 緊急事態を消去 - + EMERGENCY 緊急事態 + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS アーム状態 - + RID COMMS RID COMMS - + NOT CONNECTED 接続されていません - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID オペレータ ID - - Arm status error: - アーム状態エラー: - - - - Region - リージョン - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - 緯度修正 (-90～90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - 経度修正 (-180～180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - 高度修正 + + + Broadcast + Broadcast - - Latitude - 緯度 - - - - Longitude - 経度 + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - 高度 + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (必須) + + GroundStation Location + GroundStation Location - - Heading - ヘッディング + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. 精度 + + Provide Information + Provide Information - + NMEA External GPS Device NMEA 外部GPSデバイス - + NMEA GPS Baudrate NMEA GPS伝送速度 - + NMEA stream UDP port NMEA stream UDPポート - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - 注: このパラメータはRID機器にBasic IDが既に設定されている場合はオプションとなります。その場合。Basic ID 2として登録されます。 - - - + Operator ID オペレータ ID - - Self ID - セルフ ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - 注: このボックスが設定されていなくても、QGroundControlは緊急事態が設定された場合、またはそれが消去された後にセルフ IDメッセージを送信します。 -各セルフ IDのメッセージは保存され、再起動を保持します。送信メッセージを設定するには、セルフ IDのドロップダウン内にある各タイプを選択します。 + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + セルフ ID @@ -16555,7 +16267,7 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること SerialConfiguration - + Serial Link Settings シリアルリンク設定 @@ -16563,24 +16275,14 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること SerialLink - - Could not send data - link %1 is disconnected! - データを送信できませんでした - リンク %1 は切断されました！ - - - - Error connecting: Could not create port. %1 - 接続エラー: ポートを作成できませんでした。 %1 - - - - Could not read data - link %1 is disconnected! - データを読み取れませんでした - リンク %1 が切断されました！ + + Serial Link Error + Serial Link Error - - Link Error - リンクエラー + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16646,6 +16348,44 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること ストップビット + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16765,57 +16505,57 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること メッセージパネルのテキストがありません - + %1 setup must be completed prior to %2 setup. %2 の設定の前に %1 の設定を完了する必要があります。 - + %1 does not currently support setup of your vehicle type. %1 は現在、貴方の機体設定をサポートしていません。 - + Vehicle settings and info will display after connecting your vehicle. 機体を接続すると、機体の設定や情報が表示されます。 - + You are currently connected to a vehicle but it did not return the full parameter list. 現在、機体に接続されていますが、完全なパラメータリストは返されませんでした。 - + As a result, the full set of vehicle setup options are not available. そのため、すべての機体設定オプションを利用することはできません。 - + Summary 概要 - + Firmware ファームウェア - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick ジョイスティック - + Buttons ボタン - + Parameters パラメータ @@ -16939,42 +16679,42 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること SimpleMissionItem - + Unknown: %1 不明: %1 - + L L - + Takeoff 離陸 - + Land 着陸 - + Transition Direction 飛行切替 - + VTOL Land VTOL 着陸 - + ROI ROI - + Loiter ロイター @@ -16990,7 +16730,7 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること StandardModes - + Unknown %2 不明 %2 @@ -16998,47 +16738,47 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること StatusTextHandler - + EMERGENCY 緊急 - + ALERT 警告 - + Critical 重大 - + Error エラー - + Warning 警告 - + Notice 注意 - + Info 情報 - + Debug デバッグ - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17395,7 +17135,7 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること TCPConfiguration - + TCP Link Settings TCPリンク設定 @@ -17403,20 +17143,42 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること TCPLink - - - Link Error - リンクエラー + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - リンクエラー %1. 接続に失敗しました + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - リンクエラー %1. ソケットエラー: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17451,48 +17213,48 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること TelemetryRSSIIndicator - + Telemetry RSSI Status テレメトリー RSSI状態 - + Local RSSI: ローカル RSSI: - - + + dBm dBm - + Remote RSSI: リモート RSSI: - + RX Errors: 受信エラー: - + Errors Fixed: エラー修正: - + TX Buffer: 送信バッファ: - + Local Noise: ローカルノイズ: - + Remote Noise: リモートノイズ: @@ -17684,7 +17446,7 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること ToolIndicatorPage - + Waiting for parameters... パラメータを待っています… @@ -17852,7 +17614,7 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること UDPConfiguration - + UDP Link Settings UDPリンク設定 @@ -17860,123 +17622,160 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること UDPLink - - + UDP Link Error UDPリンクエラー - - Error binding UDP port: %1 - UDPポート バインド中エラー: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Zeroconf 登録エラー + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTMサービスエディタ - - + + Enabled 有効 - - + + Disabled 無効 - + + Logout + Logout + + + User ID ユーザ ID - + Password: パスワード: - + Login ログイン - + Forgot Your Password? パスワードをお忘れですか？ - + New User? Register Now 新規ユーザですか？今すぐ登録 - + Insert Geofence ジオフェンスを挿入 - + Min Altitude 最低高度 - + Max Altitude 最大高度 - - Delete - 削除 - - - + Date & Time 日付と時間 - + Date 日付 - + Time 時間 - + Start Time 開始時間 - + End Time 終了時間 - + Mission Altitude ミッション高度 - + Register Flight Plan 飛行プランを登録 - + Remove Flight Plan 飛行プランを削除 @@ -18096,22 +17895,22 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること 温度 - + Choose the measurement units you want to use. You can also change it later in General Settings. 使用したい測定単位を選択してください。後で【全般】設定で変更することもできます。 - + System of units システム単位 - + Metric System メートル法 - + Imperial System ヤード・ポンド法 @@ -18317,7 +18116,7 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること VTOL 着陸 - + %1 complex item version %2 not supported %1 の複雑な項目バージョン %2 はサポートされていません @@ -18345,78 +18144,78 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること 高度にロイターを使用 - - + + Altitude 高度 - + Radius 半径 - + Loiter clockwise ロイター 時計回り - + Landing point 着陸地点 - + Heading ヘッディング - + Landing Dist 着陸地点 - + Altitudes relative to launch 離陸地点からの相対高度 - + Camera カメラ - + * Actual flight path will vary. * 実際の飛行経路は異なります。 - + * Avoid tailwind on approach to land. * 着陸時のアプローチは追い風を避けてください。 - + * Ensure landing distance is enough to complete transition. * 飛行切り替えを完了するのに十分な着陸距離を確保してください。 - + Click in map to set landing point. 地図をクリックして着陸地点を設定します。 - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. ロイターポイントをドラッグして、風や障害物に合わせて着陸方向を調整したり、着陸地点までの距離を調整したりします。 - + Done 完了 @@ -18424,183 +18223,165 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること VTOLLandingPatternMapVisual - + Loiter ロイター - + Approach アプローチ - + Land 着陸 - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: 固定翼機 - - - - VTOL: Multi-Rotor - VTOL: マルチコプター - - Vehicle - + Mission transfer failed. Error: %1 ミッション転送に失敗しました。エラー: %1 - + GeoFence transfer failed. Error: %1 ジオフェンスの転送に失敗しました。エラー: %1 - + Rally Point transfer failed. Error: %1 ポイントの転送に失敗しました。エラー: %1 - + battery %1 level low バッテリー %1 残量低下 - + battery %1 level is critical バッテリー %1 重大レベル - + battery %1 level emergency バッテリー %1 レベル緊急事態 - + battery %1 failed バッテリー %1 が故障です - + battery %1 unhealthy バッテリー %1 が不安定です - + warning 警告 - + Set Home failed, terrain data not available for selected coordinate ホームの設定に失敗しました。選択した座標に地形データがありません。 - + minimum altitude 最低高度 - + maximum altitude 最大高度 - + boundary 境界線 - + fence breached フェンス突破 - + Vehicle %1 機体 %1 - + Vehicle reboot failed. 機体の再起動に失敗しました。 - + %1 %2 flight mode %1 %2 飛行モード - + armed アームしました - + disarmed ディスアームしました - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. コマンドを送信できません: %1. - + Internal error - MAV_COMP_ID_ALL not supported 内部エラー - MAV_COMP_ID_ALLはサポートされていません - + Waiting on previous response to same command. 同一コマンドに対する前の応答を待機しています。 - + Vehicle did not respond to command: %1 機体がコマンドに応答しませんでした: %1 - + Bootloader flash succeeded ブートローダーの書き込みに成功しました - + %1 command temporarily rejected %1 コマンドは一時的に拒否されました - + %1 command denied %1 コマンドが使用できません - + %1 command not supported %1 コマンドはサポートされていません - + %1 command failed %1 コマンドに失敗しました @@ -18608,42 +18389,42 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること Vehicle Class - + Airship 飛行艇 - + Fixed Wing 固定翼機 - + Rover-Boat ローバーボート - + Sub サブマリン - + Multi-Rotor マルチコプター - + VTOL VTOL - + Generic 汎用 - + Unknown 不明 @@ -18651,49 +18432,49 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること VehicleLinkManager - + %1Communication regained on %2 link %1 通信の %2 リンクで回復しました - - + + primary プライマリ - - + + secondary セカンダリ - + %1Communication regained %1 通信が回復しました - + %1Switching communication to new primary link %1 新しいプライマリリンクへの通信切替 - + %1Communication lost on %2 link. %1 通信の %2 リンクが失われました。 - + %1Switching communication to secondary link. %1 セカンダリリンクへの通信切替 - + %1Communication lost %1 通信が失われました。 - + Comm Lost 通信断 @@ -18801,22 +18582,17 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること VideoManager - - Video receiver is not ready. - 映像受信機の準備ができていません。 - - - + Invalid video format defined. 無効な動画形式が定義されています。 - + Unabled to record video. Video save path must be specified in Settings. ビデオ録画できませんでした。ビデオ保存パスは設定で指定する必要があります。 - + Restart application for changes to take effect. 変更を反映させるには、アプリケーションを再起動してください。 @@ -18824,142 +18600,142 @@ ROTATION_NONEは、コンポーネントが飛行方向を向いていること VideoSettings - + No Video Available 利用可能なビデオはありません - + Video Stream Disabled ビデオストリームは無効です - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (要再起動) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source 動画 参照元 - + Mavlink camera stream is automatically configured MAVLinkカメラストリームが自動的に設定されています - + Source 参照元 - + Connection 接続 - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDPポート - + Settings 設定 - + Aspect Ratio アスペクト比 - + Stop recording when disarmed ディスアーム時に録画を停止 - + Low Latency Mode 低遅延モード - + Video decode priority ビデオデコード優先度 - + Local Video Storage ローカル動画ストレージ - + Record File Format 録画ファイル形式 - + Auto-Delete Saved Recordings 保存された録画の自動削除 - + Max Storage Usage 最大ストレージ使用量 diff --git a/translations/qgc_source_ko_KR.ts b/translations/qgc_source_ko_KR.ts index eac9f400bee..37a285d3829 100644 --- a/translations/qgc_source_ko_KR.ts +++ b/translations/qgc_source_ko_KR.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB 서버 오류: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 경고 : 사용중인 비행 보드에는 비행에 대한 조언을 제공하는 중요한 서비스 공지가 있습니다. 자세한 내용은 다음을 참조하십시오: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -117,30 +109,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -488,66 +485,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Solo 비디오 링크 설정 오류: %1 - + Unable to change altitude, vehicle altitude not known. 고도를 바꿀 수 없습니다. 기체의 고도를 알 수 없습니다. - + Unable to pause vehicle. - Unable to pause vehicle. + Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff 기체가 유도 이륙을 지원하지 않습니다. - + Unable to takeoff, vehicle position not known. 이륙할 수 없습니다. 기체의 위치를 알 수 없습니다. - + Unable to takeoff: Vehicle failed to change to Guided mode. 이륙할 수 없습니다: 기체가 Guided 모드에 진입할 수 없습니다. - + Unable to takeoff: Vehicle failed to arm. 이륙할 수 없습니다: 기체 시동이 되지 않았습니다. - - + + Unable to start mission: Vehicle failed to change to Auto mode. 미션을 시작할 수 없습니다: 기체가 Auto 모드 진입에 실패했습니다. - + Unable to start mission: Vehicle failed to change to Guided mode. 미션을 시작할 수 없습니다: 기체가 Guided 모드에 진입할 수 없습니다. - + Unable to start mission: Vehicle failed to arm. 미션을 시작할 수 없습니다: 기체 시동에 실패하였습니다. - - - Follow failed: Home position not set. - 추적 실패: 시작 위치가 설정되지 않았음 - - - - Follow failed: Ground station cannot provide required position information. - 추적 실패: 지상 기지가 요구되는 위치 정보를 제공할 수 없음 - APMFlightModeIndicator @@ -797,37 +809,37 @@ Specify Offsets - Specify Offsets + Specify Offsets Point Vehicle - Point Vehicle + Point Vehicle Maintain current vehicle orientation - Maintain current vehicle orientation + Maintain current vehicle orientation Point at ground station location - Point at ground station location + Point at ground station location Same direction as ground station movement - Same direction as ground station movement + Same direction as ground station movement Vehicle Offsets - Vehicle Offsets + Vehicle Offsets @@ -859,42 +871,62 @@ L 출발 + + + APMFollowComponentSummary - - Follow Me - 팔로우미 + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - 배터리1 모니터 + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - 배터리1 용량 + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - 배터리2 모니터 + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - 배터리2 용량 + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1017,7 +1049,7 @@ * Stabilize Collective Curve * - * Stabilize Collective Curve * + * Stabilize Collective Curve * @@ -1028,7 +1060,7 @@ * Tail & Gyros * - * Tail & Gyros * + * Tail & Gyros * @@ -1175,8 +1207,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1184,12 +1216,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1205,7 +1237,7 @@ Warning: Unable to determine motor count - Warning: Unable to determine motor count + Warning: Unable to determine motor count @@ -1487,7 +1519,7 @@ Amps Offset: - Amps Offset: + Amps Offset: @@ -1858,25 +1890,25 @@ - + - + Return to Launch 이륙위치로 귀환 - + - + Return at current altitude 현재고도에서 귀환 - + - + Return at specified altitude: 설정 고도에서 귀환: @@ -1899,14 +1931,14 @@ 최종 착륙 단계 하강 속도 : - - + + Arming Checks 시동 검사 - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. 경고: 시동 체크를 비활성화하는 것은 기체의 제어를 잃는 결과를 가져올 수 있습니다. @@ -2081,42 +2113,42 @@ APMSafetyComponentPlane - + Failsafe Triggers 고장검출 트리거 - + Throttle PWM threshold: 스로틀 PWM 임계값: - + Voltage threshold: 전압 임계값: - + MAH threshold: MAH 임계값: - + GCS failsafe 지상국(GCS) 안전장치 - + Return to Launch 이륙위치로 귀환 - + Return at current altitude 현재고도에서 귀환 - + Return at specified altitude: 설정 고도에서 귀환: @@ -2204,7 +2236,7 @@ Logic when Dry: - Logic when Dry: + Logic when Dry: @@ -2246,7 +2278,7 @@ Timeout: - Timeout: + Timeout: @@ -2511,34 +2543,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: 스로틀 안전장치: - - - + + + Disabled 비활성화 - + Voltage failsafe: 전압 안전장치: - + mAh failsafe: mAh 안전장치: - + RTL min alt: RTL(돌아오기) 최소 고도: - + current 현재 @@ -2916,13 +2948,13 @@ Magnetic Declination - Magnetic Declination + Magnetic Declination Manual Magnetic Declination - Manual Magnetic Declination + Manual Magnetic Declination @@ -3355,13 +3387,13 @@ Click Ok to start calibration. Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available. - Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available. + Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available. Frame selection - Frame selection + Frame selection @@ -3379,19 +3411,19 @@ Click Ok to start calibration. Yes, Load default parameter set for %1 - Yes, Load default parameter set for %1 + Yes, Load default parameter set for %1 No, set frame only - No, set frame only + No, set frame only Confirm frame %1 - Confirm frame %1 + Confirm frame %1 @@ -3465,19 +3497,19 @@ Blue Robotics 추진기는 물로 윤활되고 대기에서 작동하도록 설 This will attempt to automatically detect the direction (normal/reversed) of your thrusters. Please place your vehicle in water, click the button, and wait. Note that the thrusters still need to be connected to the correct outputs (thrusters 2 and 3 can't be swapped, for example). - This will attempt to automatically detect the direction (normal/reversed) of your thrusters. + This will attempt to automatically detect the direction (normal/reversed) of your thrusters. Please place your vehicle in water, click the button, and wait. Note that the thrusters still need to be connected to the correct outputs (thrusters 2 and 3 can't be swapped, for example). APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3899,40 +3931,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4065,14 +4105,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th 커스텀 펌웨어 버전 - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4086,17 +4118,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Select Altitude Mode - Select Altitude Mode + Select Altitude Mode Relative To Launch - Relative To Launch + Relative To Launch Specified altitudes are relative to launch position height. - Specified altitudes are relative to launch position height. + Specified altitudes are relative to launch position height. @@ -4106,43 +4138,43 @@ Please place your vehicle in water, click the button, and wait. Note that the th Specified altitudes are Above Mean Sea Level. - Specified altitudes are Above Mean Sea Level. + Specified altitudes are Above Mean Sea Level. Calculated Above Terrain - Calculated Above Terrain + Calculated Above Terrain Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values. - Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values. + Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values. Terrain Frame - Terrain Frame + Terrain Frame Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor. - Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor. + Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor. Mixed Modes - Mixed Modes + Mixed Modes The altitude mode can differ for each individual item. - The altitude mode can differ for each individual item. + The altitude mode can differ for each individual item. AppLogModel - + Open console log output file failed %1 : %2 콘솔 로그 출력파일 열기 오류 %1 : %2 @@ -4160,17 +4192,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th 로깅 카테고리 - + Search: 검색: - + Clear 지우기 - + Clear All 모두 지우기 @@ -4248,375 +4280,767 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) - (Partial) + (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - 시동됨 + + Stabilize + Stabilize - - Disarmed - 시동 꺼짐 + + Acro + Acro - - Arm - 시동 + + Altitude Hold + Altitude Hold - - Disarm - 시동끄기 + + Auto + Auto - - - AudioOutput - - negative - 음수 + + Guided + Guided - - point - 포인트 + + Loiter + Loiter - - meters - 미터 + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - 하나이상의 기체 구성요소가 비행전 설정이 필요합니다 + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - 지정되지 않음 + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - 배터리 %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - 충전 상태 + + Acro + Acro - - - Remaining - 잔여용량 + + FBW A + FBW A - - Voltage - 전압 + + FBW B + FBW B - - Consumed - 소비 + + Cruise + Cruise - - Temperature - 온도 + + Autotune + Autotune - - Function - 기능 + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings - 블루투스 링크 설정 + + Manual + Manual - - Bluetooth Not Available - 블루투스를 사용할 수 없습니다 + + Acro + Acro - - - BluetoothLink - - Bluetooth Link Error - 블루투스 연결 오류 + + Learning + Learning - - - BluetoothSettings - - Device - Device + + Steering + Steering - - Address - Address + + Hold + Hold - - Bluetooth Devices - 블루투스 장치 + + Loiter + Loiter - - Scan - 스캔 + + Follow + Follow - - Stop - 정지 + + Simple + Simple - - - Bootloader - - Write failed: %1 - 쓰기 오류: %1 + + Dock + Dock - - Incorrect number of bytes returned for write: actual(%1) expected(%2) + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + 시동됨 + + + + Disarmed + 시동 꺼짐 + + + + Arm + 시동 + + + + Disarm + 시동끄기 + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + 하나이상의 기체 구성요소가 비행전 설정이 필요합니다 + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + 지정되지 않음 + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + 배터리 %1 + + + + Status + Status + + + + Charge State + 충전 상태 + + + + + Remaining + 잔여용량 + + + + Voltage + 전압 + + + + Consumed + 소비 + + + + Temperature + 온도 + + + + Function + 기능 + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings + 블루투스 링크 설정 + + + + Bluetooth Not Available + 블루투스를 사용할 수 없습니다 + + + + BluetoothLink + + + Bluetooth Link Error + 블루투스 연결 오류 + + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + + + + BluetoothSettings + + + Device + Device + + + + Address + Address + + + + Bluetooth Devices + 블루투스 장치 + + + + Scan + 스캔 + + + + Stop + 정지 + + + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + + + Bootloader + + + Write failed: %1 + 쓰기 오류: %1 + + + + Incorrect number of bytes returned for write: actual(%1) expected(%2) 쓰기 위해 반환된 바이트 수가 잘못되었습니다: 실제값(%1) 기대값(%2) @@ -4723,7 +5147,7 @@ Click Ok to start the auto-tuning process. Unable to put radio into command mode +++ - Unable to put radio into command mode +++ + Unable to put radio into command mode +++ @@ -4733,12 +5157,12 @@ Click Ok to start the auto-tuning process. Radio did not respond to ATI2 command - Radio did not respond to ATI2 command + Radio did not respond to ATI2 command Radio did not return board id - Radio did not return board id + Radio did not return board id @@ -4758,7 +5182,7 @@ Click Ok to start the auto-tuning process. Get Device: - Get Device: + Get Device: @@ -4787,27 +5211,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width 너비 - + Height 높이 - + Sensor 센서 - + Image 이미지 - + Focal length 초점 거리 @@ -4815,27 +5239,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap 전면 겹침 - + Side Lap 측면 겹침 - + Overlap 오버랩 - + Select one: 하나를 선택하십시오: - + Grnd Res 지상 해상도 @@ -5097,23 +5521,23 @@ Click Ok to start the auto-tuning process. 구성요소 %1 - + Internal Error: Parameter MetaData major must be 1 - Internal Error: Parameter MetaData major must be 1 + Internal Error: Parameter MetaData major must be 1 ComplexMissionItem - - + + This Pattern does not support Presets. 이 패턴은 프리셋을 지원하지 않습니다. - + '%1' is a built-in preset which cannot be deleted. - '%1' is a built-in preset which cannot be deleted. + '%1' is a built-in preset which cannot be deleted. @@ -5169,7 +5593,7 @@ Click Ok to start the auto-tuning process. Use the Polyline Tools to create the polyline which defines the corridor. - Use the Polyline Tools to create the polyline which defines the corridor. + Use the Polyline Tools to create the polyline which defines the corridor. @@ -5180,18 +5604,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5214,7 +5638,7 @@ Click Ok to start the auto-tuning process. Generic Initial checks - Generic Initial checks + Generic Initial checks @@ -5562,20 +5986,12 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - 닫기 - - FTPManager Invalid Nak format - Invalid Nak format + Invalid Nak format @@ -5623,53 +6039,58 @@ Click Ok to start the auto-tuning process. 기체의 위치로 설정 - - + + Altitude 고도 - + + Flight Speed + Flight Speed + + + Radius 반지름 - + Loiter clockwise 반시계방향 회전 - + Landing point 착륙 위치 - + Heading 진행방향 - + Glide Slope 활강 기울기 - + Altitudes relative to launch 시작지점과의 상대 고도 - + Drag the loiter point to adjust landing direction for wind and obstacles. 로이터 포인트를 드래그 하여 바람과 장애물에 대한 착륙 방향을 조정합니다. - + Done 완료 - + Camera 카메라 @@ -5681,35 +6102,35 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - Use loiter to altitude + Use loiter to altitude - + Distance 거리 - + * Approximate glide slope altitudes. * 대략적인 활공 경사 고도. - + * Actual flight path will vary. * 실제 비행 경로는 다를 수 있습니다. - + * Avoid tailwind on landing. * 착륙시 뒷바람을 피하십시오. - + Click in map to set landing point. 지도에서 착륙 위치를 클릭해주십시오. - + - or - - 또는 - @@ -5717,22 +6138,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter 로이터 - + Approach 어프로치 - + Landing Area 착륙 에어리어 - + Glide Slope 활강 기울기 @@ -5794,29 +6215,16 @@ Click Ok to start the auto-tuning process. 값이 %1과 %2 사이에 있어야 합니다 - - - Invalid number - 잘못된 번호 - - - - FactSlider - - - N/A - N/A + + + Invalid number + 잘못된 번호 FactTextField - - Invalid Value - 유효하지 않은 값 - - - + Value Details 값 세부 정보 @@ -5874,22 +6282,22 @@ Click Ok to start the auto-tuning process. Firmware Class - + PX4 Pro PX4 Pro - + ArduPilot ArduPilot - + Generic 일반 - + Unknown 알 수 없음 @@ -5999,376 +6407,8 @@ Click Ok to start the auto-tuning process. FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - Canon S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 - - - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 - - - - a7r III 35mm - a7r III 35mm - - - - a7r IV 35mm - a7r IV 35mm - - - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 - - - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 - - - - DSC-RX0 - DSC-RX0 - - - - Sony DSC-RX0 - Sony DSC-RX0 - - - - DSC-RX1R II 35mm - DSC-RX1R II 35mm - - - - ILCE-QX1 - ILCE-QX1 - - - - Sony ILCE-QX1 - Sony ILCE-QX1 - - - - NEX-5R 20mm - NEX-5R 20mm - - - - Sony NEX-5R 20mm - Sony NEX-5R 20mm - - - - RX100 II 28mm - RX100 II 28mm - - - - Sony RX100 II 28mm - Sony RX100 II 28mm - - - - - - - Yuneec - Yuneec - - - - CGOET - CGOET - - - - Yuneec CGOET - Yuneec CGOET - - - - E10T - E10T - - - - Yuneec E10T - Yuneec E10T - - - - E50 - E50 - - - - Yuneec E50 - Yuneec E50 - - - - E90 - E90 - - - - Yuneec E90 - Yuneec E90 - - - - - Flir - Flir - - - - Duo R - Duo R - - - - Flir Duo R - Flir Duo R - - - - Duo Pro R - Dur Pro R - - - - - Workswell - Workswell - - - - - Wiris Security - Wiris Security - - - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. 기체가 안정 펌웨어 최신 버전을 사용하고 있지 않습니다! %1을 사용 중이고, 최신 안정 버전은 %2입니다. @@ -6386,11 +6426,6 @@ Click Ok to start the auto-tuning process. Firmware Setup 펌웨어 설정 - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1은 Pixhawk 장치, SiK Radios 및 PX4 Flow Smart 카메라의 펌웨어를 업그레이드 할 수 있습니다. - Update the autopilot firmware to the latest version @@ -6402,7 +6437,7 @@ Click Ok to start the auto-tuning process. 모든 %1 기체의 연결상태가 되어야합니다 - + Upgrade cancelled 업그레이드 취소 @@ -6411,6 +6446,11 @@ Click Ok to start the auto-tuning process. Select Firmware File 펌웨어 파일을 선택하여 주십시오 + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6497,162 +6537,144 @@ Click Ok to start the auto-tuning process. 장치를 찾았습니다 - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) 표준 버전 (stable) - + Beta Testing (beta) 베타 테스팅 (beta) - + Developer Build (master) 개발자 빌드(master) - - - + + Custom firmware file... 사용자 정의 펌웨어 파일... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version 표준 버전 - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - PX4 Flow 보드를 감지했습니다. PX4 Flow에서 사용하는 펌웨어는 기체에서 사용중인 비행제어보드의 펌웨어 유형과 일치해야합니다: - - - + Detected Pixhawk board. You can select from the following flight stacks: PX4 Flow 보드를 감지했습니다. 아래의 펌웨어 목록에서 선택할 수 있습니다. - + Press Ok to upgrade your vehicle. 기체를 업그레이드하기 위해 확인버튼을 눌러주십시오. - + Downloading list of available firmwares... 사용 가능한 펌웨어 리스트 다운로드 중... - + No Firmware Available 사용할 수 있는 펌웨어가 없습니다 - + Advanced settings 고급 설정 - + Select the standard version or one from the file system (previously downloaded): 표준 버전을 선택하거나 (이미 다운로드한) 펌웨어 파일 시스템을 지정하십시오: - - Select which version of the firmware you would like to install: - 설치를 원하는 펌웨어 버전을 선택하십시오: - - - + Select which version of the above flight stack you would like to install: 다음 중 설치할 비행 소프트웨어 버전을 지정해주십시오: - + WARNING: BETA FIRMWARE. 경고: 베타 펌웨어입니다. - + This firmware version is ONLY intended for beta testers. 이 펌웨어 버전은 베타 테스터만을 위한 펌웨어입니다. - + Although it has received FLIGHT TESTING, it represents actively changed code. 비행 테스트중인 펌웨어를 받았지만, 비행 테스트 중인 펌웨어는 코드가 자주 변경됩니다. - + Do NOT use for normal operation. 일반 운용에 사용하지 마십시오. - + WARNING: CONTINUOUS BUILD FIRMWARE. 경고: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. 이 펌웨어는 비행 테스트를 한 적이 없습니다. - + It is only intended for DEVELOPERS. 개발자를 위한 펌웨어입니다. - + Run bench tests without props first. 우선 프로펠러를 장착하지 않고 벤치 테스트를 진행하십시오. - + Do NOT fly this without additional safety precautions. 추가적인 안전장치 없이 비행을 삼가해주십시오. - + Follow the forums actively when using it. - Follow the forums actively when using it. + Follow the forums actively when using it. - + Flash ChibiOS Bootloader ChibiOS 부트로더 설치 @@ -6660,87 +6682,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. 펌웨어 업그레이드 중 연결할 수 없습니다. - + Connected to bootloader: 부트로더에 연결했습니다: - + Version: %1 버전: %1 - + Board ID: %1 보드 ID: %1 - + Flash size: %1 플래시 용량: %1 - + Custom firmware selected but no filename given. 사용자 정의 펌웨어가 선택 되었지만 파일 이름이 지정되지 않았습니다. - + Unable to find specified firmware for board type 해당 보드 유형에 대해 지정된 펌웨어를 찾을 수 없습니다 - + No firmware file selected 펌웨어 파일이 선택되지 않았습니다 - + Downloading firmware... 펌웨어 다운로드 중... - + From: %1 %1 부터 - + Download complete 다운로드 완료 - + Image load failed 이미지 로드에 실패했습니다 - + Bootloader not found 부트로더를 찾을 수 없습니다 - + Image size of %1 is too large for board flash size %2 보드 플래시 사이즈:%2에 비해 이미지사이즈:%1이 큽니다 - + Upgrade complete 업그레이드 완료 - + Upgrade cancelled 업그레이드 취소 - + Choose board type 보드 유형 선택 @@ -6838,10 +6860,10 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - Fixed Wing Landing + Fixed Wing Landing - + %1 complex item version %2 not supported %1의 복합 항목 버전 %2은(는) 지원되지 않습니다 @@ -6849,12 +6871,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO 비디오 대기중 - + VIDEO DISABLED 비디오 비활성 @@ -6867,15 +6889,6 @@ Click Ok to start the auto-tuning process. 위치를 지정해주십시오 - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -6995,7 +7008,7 @@ Click Ok to start the auto-tuning process. ROI here Make this a Region Of Interest - ROI here + ROI here @@ -7030,26 +7043,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7103,153 +7121,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7320,113 +7338,131 @@ Click Ok to start the auto-tuning process. 전체화면 모드를 종료하려면 두번 눌러주세요. + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7434,7 +7470,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units 단위 @@ -7449,39 +7485,39 @@ Click Ok to start the auto-tuning process. 색 구성 - + Stream GCS Position 지상국 위치 스트림 - + Mute all audio output 모든 오디오 출력 음소거 - + Clear all settings on next start 다음 시작 시에 모든 설정 지우기 - + Application Load/Save Path 응용프로그램 불러오기/저장 경로 - - - + + + Browse 찾아보기 - + Choose the location to save/load files 파일을 저장/열기할 위치를 지정해주십시오. - + UI Scaling UI 크기: @@ -7491,43 +7527,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image 브랜드 이미지 - + Indoor Image 실내 이미지 - - + + Choose custom brand image file 사용자 지정 브랜드 이미지 파일 선택 - + Outdoor Image 야외 이미지 - + Reset Images Reset Images - + Reset Reset @@ -7535,17 +7571,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence는 버젼 %1을 지원합니다 - + GeoFence polygon not stored as object GeoFence 다각형이 오브젝트로 저장되지 않았습니다 - + GeoFence circle not stored as object GeoFence circle이 오브젝트로 저장되어있지 않습니다 @@ -7683,27 +7719,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - 이미지가 이미 태그되었습니다. 기존 이미지는 삭제됩니다. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. 저장 폴더에 이미 이미지가 있습니다. - + Cannot find the image directory. 이미지 폴더를 찾을 수 없습니다. - + Couldn't replace the previously tagged images 이전 지도정보에 덮어 쓰지 못하였습니다 - + Cannot find the save directory. 저장 폴더를 찾을 수 없습니다. @@ -7711,39 +7765,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file 로그 파일 선택 - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) 모든 파일 (*) - - + + Select image directory 이미지 폴더 선택 - + (Optionally) Select save directory (부가기능) 저장폴더 선택 @@ -7753,22 +7807,22 @@ Click Ok to start the auto-tuning process. 저장 폴더 선택 - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging 지도정보 입력 취소 - + Start Tagging 지도정보 입력 시작 @@ -7776,192 +7830,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format 이미지 디렉토리에 이미지가 포함되어 있지 않습니다. 이미지가 JPG 형식인지 확인하십시오. - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. 지도정보 추가 실패. 이미지를 열 수 없습니다 - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled 지도정보 추가 취소 - + Geotagging failed. Couldn't open log file. 지도정보 추가에 실패하였습니다. 로그 파일을 열수 없습니다 - - %1 - tagging cancelled - %1 - 지도정보 추가 취소 - - - + Log parsing failed 로그 분석 실패 - - Geotagging failed in trigger filtering - 지도정보추가가 트리거 필터링에서 실패하였습니다 - - - + Geotagging failed. Requesting image #%1, but only %2 images present. - Geotagging failed. Requesting image #%1, but only %2 images present. - - - - Geotagging failed. Couldn't write to image. - 지도정보 추가 실패. 이미지를 수정할 수 없습니다 - - - - Geotagging failed. Couldn't write to an image. - 위치 정보 태그 지정에 실패했습니다. 이미지에 쓸 수 없습니다. + Geotagging failed. Requesting image #%1, but only %2 images present. GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8075,7 +8136,7 @@ Click Ok to start the auto-tuning process. 위치로 이동 - + Return to the launch position of the vehicle. 기체의 홈 포지션(home position)으로 돌아갑니다. @@ -8130,162 +8191,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. 기체 시동 - + WARNING: This will force arming of the vehicle bypassing any safety checks. - WARNING: This will force arming of the vehicle bypassing any safety checks. + WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle 기체 시동 해제 - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. 경고: 이 명령은 모든 모터를 멈추게 합니다. 비행중이라면 추락할것입니다. - + Takeoff from ground and hold position. 이륙 후 위치 유지 - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. 이륙 후 현재 미션 시작 - + Continue the mission from the current waypoint. 현재 경로지점에서 미션 계속 - + Upload of resume mission failed. Confirm to retry upload 미션 계속 업로드 실패. 재시도하려면 확인해주십시오. - + Land the vehicle at the current position. 기체를 현재 위치에 착륙 시킵니다. - + Change the altitude of the vehicle up or down. 기체의 고도를 높이거나 낮춥니다 - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. 기체를 지정된 위치로 이동합니다. - + Adjust current waypoint to %1. 현재 경로지점을 %1로 조정 - + Orbit the vehicle around the specified location. 지정된 위치를 중심으로 기체를 원주비행합니다. - + Abort the landing sequence. 착륙 중단 - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. 필요에 따라 고도를 위아래로 조정하여 기체를 현재 위치로 유지하십시오. - + Pause all vehicles at their current position. 모든 기체를 현재 위치에서 일시정지 - + Transition VTOL to fixed wing flight. VTOL를 고정익 비행으로 전환하기. - + Transition VTOL to multi-rotor flight. VTOL를 고정익 비행으로 전환하기. - + Make the specified location a Region Of Interest. - Make the specified location a Region Of Interest. + Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode 내부오류: 알 수 없는 액션코드입니다 @@ -8325,13 +8396,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8339,99 +8410,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None 없음 - + Color 색 - + Opacity 불투명도 - + Icon 아이콘 InstrumentValueEditDialog - - - Value Display - 값 표시 HTML - Valuec requires a connected vehicle for setup. - Valuec requires a connected vehicle for setup. + Valuec requires a connected vehicle for setup. - + Icon 아이콘 - + Text 글자 - + + + Label 레이블 - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size 크기 - + Show Units 단위 표시 - - Range - 범위 + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row 행 추가 - + Specify the icon you want to display based on value ranges. - Specify the icon you want to display based on value ranges. + Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. - Specify the icon opacity you want based on value ranges. + Specify the icon opacity you want based on value ranges. - + Select Icon 아이콘 선택 @@ -8447,152 +8538,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action 동작 없음 - + Arm 시동 - + Disarm 시동끄기 - + Toggle Arm - Toggle Arm + Toggle Arm - + VTOL: Fixed Wing 수직이착륙기(VTOL): 고정익 - + VTOL: Multi-Rotor 수직이착륙기(VTOL): 멀티로터 - + Continuous Zoom In - Continuous Zoom In + Continuous Zoom In - + Continuous Zoom Out - Continuous Zoom Out + Continuous Zoom Out - + Step Zoom In - Step Zoom In + Step Zoom In - + Step Zoom Out - Step Zoom Out + Step Zoom Out - + Trigger Camera 카메라 트리거하기 - + Start Recording Video 동영상 녹화 시작 - + Stop Recording Video 동영상 녹화 중지 - + Toggle Recording Video 동영상 녹화 시작 - + Gimbal Down 짐벌 - + Gimbal Up 짐벌 위로 - + Gimbal Left 짐벌 왼쪽 - + Gimbal Right 짐벌 오른쪽 - + Gimbal Center 짐벌 가운데 - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop 비상 정지 - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream 다음 비디오 스트림 - + Previous Video Stream 이전 비디오 스트림 - + Next Camera 다음 카메라 - + Previous Camera 이전 카메라 @@ -8655,7 +8746,7 @@ Click Ok to start the auto-tuning process. Enable further advanced settings (careful!) - Enable further advanced settings (careful!) + Enable further advanced settings (careful!) @@ -8734,7 +8825,7 @@ Click Ok to start the auto-tuning process. No firmware support - No firmware support + No firmware support @@ -8763,7 +8854,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. %1개의 조이스틱 축을 감지하였습니다. PX4를 운용하려면 최소 %2개의 축이 필요합니다. @@ -8829,29 +8920,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status 조이스틱 상태 - + Connected: 연결완료: - - + + Yes Yes - - + + No No - + Enabled: 활성화: @@ -8876,7 +8967,7 @@ Click Ok to start the auto-tuning process. Root of json file is not object: %1 - Root of json file is not object: %1 + Root of json file is not object: %1 @@ -8939,12 +9030,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1은(는) 복합 미션 유형: %2:%3 로딩을 지원하지 않습니다. - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. 고정익 착륙 패턴 : 정지 비행 고도와 착륙 고도를 다르게 설정하는 것은 더 이상 지원되지 않습니다. 두 항목 모두 상대 고도로 설정 되어야 합니다. 비행 전 비행 계획을 다시 한번 확인하여 주시기 바랍니다 @@ -8952,12 +9043,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8965,51 +9056,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 연결할 수 없습니다: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (자동 접속) - + Shutdown 시스템 종료 - + Serial 직렬 - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link 가상 링크 - + AirLink AirLink - - + + Log Replay 로그 리플레이 @@ -9017,12 +9112,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add 추가 - + Connect 연결 @@ -9032,93 +9127,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect 연결 해제 - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name 이름 - + Enter name 이름 입력 - + Automatically Connect on Start 시작시 자동으로 연결 - + High Latency 높은 지연율 - + Type 타입 @@ -9126,216 +9251,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available 사용가능 - - + Canceled 취소됨 - - - + + Error 오류 - + Downloaded  다운로드 완료 - - Timed Out - 시간 초과 - - - + Waiting 대기 중 - - - UnknownDate - 날짜 알 수 없음 - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. 로그 다운로드(Log Download)는 기체로부터 바이너리 로그 파일을 다운로드합니다. '새로고침'을 클릭하면 다운로드 가능한 로그 목록을 받아옵니다. - + Id Id - + Date 날짜 - + Date Unknown 날짜를 알 수 없습니다 - + Size 크기 - + Status 상태 - + Refresh 새로고침 - + Log Refresh 로그 새로고침 - + You must be connected to a vehicle in order to download logs. 로그를 다운로드 하기 위해서는 기체에 연결해야 합니다. - + Download 다운로드 - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory 저장 폴더 선택 - + Erase All 전체 삭제 - + Delete All Log Files 모든 로그파일 삭제 - + All log files will be erased permanently. Is this really what you want? 모든 로그 파일이 영구삭제됩니다. 삭제하시겠습니까? - + Cancel 취소 - LogReplayLink - - - Log Replay Error - 로그 재생 오류 - - - - You must close all connections prior to replaying a log. - 로그를 재생하기 전 모든 연결을 닫아야 합니다. - - - - Attempt to load new log while log being played - 로그 재생 중 새로운 로그파일 열기를 시도합니다 - - - - Unable to open log file: '%1', error: %2 - 파일을 열 수 없습니다: '%1', 오류: %2 - - - - The log file '%1' is corrupt or empty. - 로그 파일 '%1' 이 손상되었거나 비어 있습니다. - - - - Connect not allowed during Flight Data replay. - Flight Data 재생 중에는 연결이 허용되지 않습니다. - - - - - Unable to seek to new position - 새 위치를 검색 할 수 없습니다 - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings - 로그 재생 링크 설정 + Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2분:%3초 + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1시간:%2분:%3초 + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File 로그 파일 - + Browse 찾아보기 - + Select Telemetery Log 텔레메트리 로그 선택 - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) 모든 파일 (*) @@ -9368,180 +9442,214 @@ Click Ok to start the auto-tuning process. 모든 파일 (*) - + Pause 일시 중지 - + Play 재생 - + Load Telemetry Log 텔레메트리 로그 파일 열기 - + Close 닫기 + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro 자이로스코프 센서 - + Accelerometer 가속도 센서 - + Magnetometer 자력계 - + Absolute pressure - Absolute pressure + Absolute pressure - + Differential pressure - Differential pressure + Differential pressure - + GPS GPS - + Optical flow 광류 - + Computer vision position - Computer vision position + Computer vision position - + Laser based position - Laser based position + Laser based position - + External ground truth - External ground truth + External ground truth - + Angular rate control - Angular rate control + Angular rate control - + Attitude stabilization 고도 안정화 - + Yaw position Yaw 위치 - + Z/altitude control Z/고도 제어 - + X/Y position control X/Y 위치 제어 - + Motor outputs / control 모터 출력 / 제어 - + RC receiver 무선 수신기 - + Gyro 2 자이로 2 - + Accelerometer 2 가속도 센서 2 - + Magnetometer 2 자력계 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain 지형 - + Motors reversed - Motors reversed + Motors reversed - + Logging 로깅 - + Battery 배터리 - + Proximity - Proximity + Proximity - + Satellite Communication 위성 통신 - + Pre-Arm Check 시동 전 체크 - + Avoidance/collision prevention 회피/충돌 방지 - + Propulsion Propulsion @@ -9549,7 +9657,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor 알 수 없는 센서 @@ -9570,17 +9678,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9588,80 +9696,80 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 초 - + 10 Sec 10 초 - + 30 Sec 30초 - + 60 Sec 60 초 - + Auto 자동 - + 10,000 10,000+ - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 시스템 %1 @@ -9801,119 +9909,106 @@ Click Ok to start the auto-tuning process. Plot 2 - Plot 2 + Plot 2 MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink 프로토콜 - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink 로깅이 실패했습니다. 파일 %1에 쓰기가 실패했으며, 기록할 수 없습니다. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - 라디오가 MAVLink v2.0 링크에서 MAVLink v1.0을 사용합니다. 라디오 펌웨어를 업그레이드하십시오. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink 프로토콜 + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Fight Data 파일을 열지 못했습니다. %1에 쓸 수 없습니다. 다른 파일 위치를 선택하십시오. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? 아직 기체에 연결되어 있습니다. 정말로 종료하시겠습니까? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? 진행 중이거나 저장되지 않은 미션 수정이 있습니다. 닫으면 변경 사항이 적용되지 않습니다. 닫으시겠습니까? - - + + Analyze Tools 분석 도구 - - + + Vehicle Setup 기체 설정 - - + + Application Settings 응용프로그램 설정 - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? 기체에 반영하지 않은 파라미터가 있습니다. 닫을 시 반영하지 않은 파라미터는 사라집니다. 정말로 닫으시겠습니까? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 버전 - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode 고급 모드 - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back 뒤로 가기 @@ -9953,12 +10048,12 @@ Click Ok to start the auto-tuning process. FW(vtol) - FW(vtol) + FW(vtol) MR(vtol) - MR(vtol) + MR(vtol) @@ -10065,37 +10160,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10128,17 +10218,12 @@ Click Ok to start the auto-tuning process. 피트(ft) - - T - T - - - + + + - + - - @@ -10146,162 +10231,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10335,7 +10425,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands 모든 명령 @@ -10401,43 +10491,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position 기체 위치로 이동 - + Move to previous item position 이전 아이템 위치로 이동 - + Edit position... 위치 편집... - + Show all values 모든 값 보기 - + Mission Edit 미션 편집 - + You have made changes to the mission item which cannot be shown in Simple Mode 단순 모드에서 표시할 수 없는 미션 항목을 변경했습니다. - + Item #%1 항목 1 @@ -10453,7 +10543,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. MAV_CMD_DO_JUMP 명령에 의해 '미션 계속' 명령을 생성할 수 없습니다 @@ -10508,7 +10598,7 @@ Click Ok to start the auto-tuning process. The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission. - The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission. + The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission. @@ -10604,19 +10694,6 @@ Click Ok to start the auto-tuning process. 가상링크 설정 - - ModeSwitchDisplay - - - Monitor: - 모니터: - - - - Threshold: - 임계값: - - MotorAssignment @@ -10676,7 +10753,7 @@ Do you wish to proceed? Warning: Unable to determine motor count - Warning: Unable to determine motor count + Warning: Unable to determine motor count @@ -10714,7 +10791,7 @@ Do you wish to proceed? Multirotor Initial Checks - Multirotor Initial Checks + Multirotor Initial Checks @@ -10724,7 +10801,7 @@ Do you wish to proceed? Props mounted and secured? - Props mounted and secured? + Props mounted and secured? @@ -10747,436 +10824,111 @@ Do you wish to proceed? 미션 - - Please confirm mission is valid (waypoints valid, no terrain collision). - 미션이 올바른지(경로지점 확인, 지면과의 충돌) 확인해주십시오. - - - - Last preparations before launch - 이륙 전 마지막 준비사항 - - - - Payload - 페이로드 - - - - Configured and started? Payload lid closed? - 설정 후 시작이 되었습니까? 페이로드 덮개가 닫혔습니까? - - - - Wind & weather - 바람 & 날씨 - - - - OK for your platform? - OK for your platform? - - - - Flight area - 비행영역 - - - - Launch area and path free of obstacles/people? - 비행 경로와 이륙 위치상에 장애물 또는 사람이 없습니까? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - 다음 명령이 모든 기체에 적용됩니다. - - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - 시동됨 - - - - Disarmed - 시동 꺼짐 - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - 경고: 기체가 %1:%2와(과) 같은 Id를 사용합니다 - - - - Connected to Vehicle %1 - 기체 %1에 연결되었습니다 - - - - MultiVehicleSelector - - - Vehicle - 기체 - - - - OfflineMap - - - Error Message - 오류 메시지 - - - - Max Cache Disk Size (MB): - 최대 캐시 디스크 크기(MB): - - - - Max Cache Memory Size (MB): - 최대 캐시 메모리 크기(MB): - - - - Memory cache changes require a restart to take effect. - 메모리 케시설정 변경을 적용하려면 재시작해야합니다 - - - - Mapbox Access Token - Mabbox 액세스 토큰 - - - - To enable Mapbox maps, enter your access token. - Mapbox 지도를 사용하려면 액세스 토큰을 입력하여주십시오. - - - - Mapbox User Name - MapBox 유저 이름 - - - - To enable custom Mapbox styles, enter your account name. - 커스텀 MapBox 스타일을 활성화하려면, 계정을 입력해 주세요. - - - - Mapbox Style ID - MapBox 스타일 ID - - - - To enable custom Mapbox styles, enter your style ID. - 커스텀 MabBox 스타일을 활성화 하려면, 스타일 ID를 입력해 주세요. - - - - Esri Access Token - Esri 액세스 토큰 - - - - To enable Esri maps, enter your access token. - Esri 지도를 사용하려면 액세스 토큰을 입력하여주십시오. - - - - VWorld Access Token - VWorld 액세스 토큰 - - - - To enable VWorld maps, enter your access token. - VWorld 지도를 사용하려면 액세스 토큰을 입력하여 주십시오. - - - - Custom Map URL - 커스텀 맵 URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - 직접 만든 타일 세트를 포함한 모든 타일이 삭제됩니다. - -삭제하시겠습니까? - - - - Delete %1 and all its tiles. - -Is this really what you want? - %1이(가) 포함한 모든 타일이 삭제됩니다. - -삭제하시겠습니까? - - - - System Wide Tile Cache - 시스템 와이드 타일 캐시 - - - - Zoom Levels: - 확대 수준: - - - - Total: - 합계: - - - - Unique: - 고유: - - - - Downloaded: -  다운로드 완료: - - - - Error Count: - 오류 횟수: - - - - Size: - 크기: - - - - - Tile Count: - 타일 카운트: - - - - Resume Download - 다운로드 계속 - - - - Cancel Download - 다운로드 취소 - - - - Delete - 삭제 - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - 삭제 확인 - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - 확인 - - - - - - Close - 닫기 - - - - - - - Cancel - 취소 - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - 최소 줌: %1 - - - - Max Zoom: %1 - 최대 줌: %1 - - - - - Add New Set - 새로운 셋 추가 - - - - Name: - 이름: - - - - Map type: - 지도 유형: + + Please confirm mission is valid (waypoints valid, no terrain collision). + 미션이 올바른지(경로지점 확인, 지면과의 충돌) 확인해주십시오. - - Fetch elevation data - 고도 데이터 가져오기 + + Last preparations before launch + 이륙 전 마지막 준비사항 - - Min/Max Zoom Levels - 최소/최대 줌 레벨 + + Payload + 페이로드 - - Est Size: - Est 크기: + + Configured and started? Payload lid closed? + 설정 후 시작이 되었습니까? 페이로드 덮개가 닫혔습니까? - - Too many tiles - 지도조각이 너무 많습니다 + + Wind & weather + 바람 & 날씨 - - Download - 다운로드 + + OK for your platform? + OK for your platform? - - - Import - 불러오기 + + Flight area + 비행영역 - - - Export - 내보내기 + + Launch area and path free of obstacles/people? + 비행 경로와 이륙 위치상에 장애물 또는 사람이 없습니까? + + + MultiVehicleList - - Options - 옵션 + + The following commands will be applied to all vehicles + 다음 명령이 모든 기체에 적용됩니다. + - - Offline Maps Options - 오프라인 지도 옵션 + + + Pause + Pause - - Select Tile Sets to Export - 내보내기할 타일 세트를 선택합니다. + + + Start Mission + Start Mission - - Select All - 모두 선택 + + Armed + 시동됨 - - Select None - 선택 없음 + + Disarmed + 시동 꺼짐 - - Export Tile Set - 타일 셋 내보내기 + + Arm + Arm - - Tile Set Export Progress - 타일 세트 내보내기 진행 + + RTL + RTL - - Tile Set Export Completed - 타일 설정 보내기 완료 + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - 지도 타일 설정 불러오기 + + Warning: A vehicle is using the same system id as %1: %2 + 경고: 기체가 %1:%2와(과) 같은 Id를 사용합니다 - - Append to existing set - 기존 셋에 추가 + + Connected to Vehicle %1 + 기체 %1에 연결되었습니다 + + + MultiVehicleSelector - - Replace existing set - 현재 세트 교체 + + Vehicle + 기체 @@ -11355,7 +11107,7 @@ Is this really what you want? Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is. - Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is. + Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is. @@ -11368,12 +11120,20 @@ Is this really what you want? 기체 + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning Select Tuning: - Select Tuning: + Select Tuning: @@ -11448,29 +11208,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11565,47 +11325,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 알 수 없음 %1:%2 - + Unable to takeoff, vehicle position not known. 이륙할 수 없습니다. 기체의 위치를 알 수 없습니다. - + Unable to go to location, vehicle position not known. 위치로 이동할 수 없습니다. 기체의 위치를 알 수 없습니다. - + Unable to pause vehicle. - Unable to pause vehicle. + Unable to pause vehicle. - + Unable to change altitude, home position unknown. 고도를 바꿀 수 없습니다. 홈 위치를 알 수 없습니다. - + Unable to change altitude, home position altitude unknown. 고도를 바꿀 수 없습니다. 홈 위치의 고도를 알 수 없습니다. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. 미션을 시작할 수 없습니다: 기체 시동에 실패하였습니다. - + Unable to start mission: Vehicle not changing to %1 flight mode. 임무를 시작할 수 없습니다: 기체가 %1 모드 전환에 실패하였습니다. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl은 PX4 펌웨어 %1.%2.%3이상을 지원합니다. 현재 버전은 이 버전보다 낮으며, 예측되지 않은 동작을 할 수 있습니다. 펌웨어를 업그레이드하십시오. @@ -11648,12 +11413,12 @@ Is this really what you want? Flight Behavior - Flight Behavior + Flight Behavior Flight Behavior is used to configure flight characteristics. - Flight Behavior is used to configure flight characteristics. + Flight Behavior is used to configure flight characteristics. @@ -11662,19 +11427,19 @@ Is this really what you want? Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set) - Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set) + Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set) Responsiveness - Responsiveness + Responsiveness A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. + A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. @@ -11686,25 +11451,25 @@ Is this really what you want? Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set) - Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set) + Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set) Horizontal velocity (m/s) - Horizontal velocity (m/s) + Horizontal velocity (m/s) Limit the horizonal velocity (applies to all modes). - Limit the horizonal velocity (applies to all modes). + Limit the horizonal velocity (applies to all modes). Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set) - Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set) + Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set) @@ -11716,287 +11481,259 @@ Is this really what you want? Limit the vertical velocity (applies to all modes). - Limit the vertical velocity (applies to all modes). + Limit the vertical velocity (applies to all modes). Mission Turning Radius - Mission Turning Radius + Mission Turning Radius Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow 카메라 + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -12005,18 +11742,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12149,7 +11886,7 @@ Is this really what you want? Tuning Setup is used to tune the flight controllers. - Tuning Setup is used to tune the flight controllers. + Tuning Setup is used to tune the flight controllers. @@ -12158,25 +11895,25 @@ Is this really what you want? Rate Controller - Rate Controller + Rate Controller Attitude Controller - Attitude Controller + Attitude Controller Velocity Controller - Velocity Controller + Velocity Controller Position Controller - Position Controller + Position Controller @@ -12191,7 +11928,7 @@ Is this really what you want? Proportional Gain (MC_ROLL_P) - Proportional Gain (MC_ROLL_P) + Proportional Gain (MC_ROLL_P) @@ -12199,7 +11936,7 @@ Is this really what you want? Increase for more responsiveness, reduce if the attitude overshoots. - Increase for more responsiveness, reduce if the attitude overshoots. + Increase for more responsiveness, reduce if the attitude overshoots. @@ -12211,7 +11948,7 @@ Is this really what you want? Proportional Gain (MC_PITCH_P) - Proportional Gain (MC_PITCH_P) + Proportional Gain (MC_PITCH_P) @@ -12223,13 +11960,13 @@ Is this really what you want? Proportional Gain (MC_YAW_P) - Proportional Gain (MC_YAW_P) + Proportional Gain (MC_YAW_P) Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick). - Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick). + Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick). @@ -12238,25 +11975,25 @@ Is this really what you want? Position control mode (set this to 'simple' during tuning): - Position control mode (set this to 'simple' during tuning): + Position control mode (set this to 'simple' during tuning): Horizontal - Horizontal + Horizontal Horizontal (Y direction, sidewards) - Horizontal (Y direction, sidewards) + Horizontal (Y direction, sidewards) Proportional gain (MPC_XY_P) - Proportional gain (MPC_XY_P) + Proportional gain (MPC_XY_P) @@ -12264,19 +12001,19 @@ Is this really what you want? Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick). - Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick). + Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick). Vertical - Vertical + Vertical Proportional gain (MPC_Z_P) - Proportional gain (MPC_Z_P) + Proportional gain (MPC_Z_P) @@ -12315,7 +12052,7 @@ Is this really what you want? Overall Multiplier (MC_ROLLRATE_K) - Overall Multiplier (MC_ROLLRATE_K) + Overall Multiplier (MC_ROLLRATE_K) @@ -12325,13 +12062,13 @@ Is this really what you want? Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help). - Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help). + Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help). Differential Gain (MC_ROLLRATE_D) - Differential Gain (MC_ROLLRATE_D) + Differential Gain (MC_ROLLRATE_D) @@ -12339,13 +12076,13 @@ Is this really what you want? Damping: increase to reduce overshoots and oscillations, but not higher than really needed. - Damping: increase to reduce overshoots and oscillations, but not higher than really needed. + Damping: increase to reduce overshoots and oscillations, but not higher than really needed. Integral Gain (MC_ROLLRATE_I) - Integral Gain (MC_ROLLRATE_I) + Integral Gain (MC_ROLLRATE_I) @@ -12355,7 +12092,7 @@ Is this really what you want? Generally does not need much adjustment, reduce this when seeing slow oscillations. - Generally does not need much adjustment, reduce this when seeing slow oscillations. + Generally does not need much adjustment, reduce this when seeing slow oscillations. @@ -12367,19 +12104,19 @@ Is this really what you want? Overall Multiplier (MC_PITCHRATE_K) - Overall Multiplier (MC_PITCHRATE_K) + Overall Multiplier (MC_PITCHRATE_K) Differential Gain (MC_PITCHRATE_D) - Differential Gain (MC_PITCHRATE_D) + Differential Gain (MC_PITCHRATE_D) Integral Gain (MC_PITCHRATE_I) - Integral Gain (MC_PITCHRATE_I) + Integral Gain (MC_PITCHRATE_I) @@ -12391,13 +12128,13 @@ Is this really what you want? Overall Multiplier (MC_YAWRATE_K) - Overall Multiplier (MC_YAWRATE_K) + Overall Multiplier (MC_YAWRATE_K) Integral Gain (MC_YAWRATE_I) - Integral Gain (MC_YAWRATE_I) + Integral Gain (MC_YAWRATE_I) @@ -12406,25 +12143,25 @@ Is this really what you want? Position control mode (set this to 'simple' during tuning): - Position control mode (set this to 'simple' during tuning): + Position control mode (set this to 'simple' during tuning): Horizontal - Horizontal + Horizontal Horizontal (Y direction, sidewards) - Horizontal (Y direction, sidewards) + Horizontal (Y direction, sidewards) Proportional gain (MPC_XY_VEL_P_ACC) - Proportional gain (MPC_XY_VEL_P_ACC) + Proportional gain (MPC_XY_VEL_P_ACC) @@ -12432,25 +12169,25 @@ Is this really what you want? Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help). - Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help). + Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help). Integral gain (MPC_XY_VEL_I_ACC) - Integral gain (MPC_XY_VEL_I_ACC) + Integral gain (MPC_XY_VEL_I_ACC) Increase to reduce steady-state error (e.g. wind) - Increase to reduce steady-state error (e.g. wind) + Increase to reduce steady-state error (e.g. wind) Differential gain (MPC_XY_VEL_D_ACC) - Differential gain (MPC_XY_VEL_D_ACC) + Differential gain (MPC_XY_VEL_D_ACC) @@ -12458,37 +12195,37 @@ Is this really what you want? Damping: increase to reduce overshoots and oscillations, but not higher than really needed. - Damping: increase to reduce overshoots and oscillations, but not higher than really needed. + Damping: increase to reduce overshoots and oscillations, but not higher than really needed. Vertical - Vertical + Vertical Proportional gain (MPC_Z_VEL_P_ACC) - Proportional gain (MPC_Z_VEL_P_ACC) + Proportional gain (MPC_Z_VEL_P_ACC) Integral gain (MPC_Z_VEL_I_ACC) - Integral gain (MPC_Z_VEL_I_ACC) + Integral gain (MPC_Z_VEL_I_ACC) Increase to reduce steady-state error - Increase to reduce steady-state error + Increase to reduce steady-state error Differential gain (MPC_Z_VEL_D_ACC) - Differential gain (MPC_Z_VEL_D_ACC) + Differential gain (MPC_Z_VEL_D_ACC) @@ -12696,19 +12433,19 @@ Is this really what you want? Altitude & Airspeed - Altitude & Airspeed + Altitude & Airspeed Height rate feed forward (FW_T_HRATE_FF) - Height rate feed forward (FW_T_HRATE_FF) + Height rate feed forward (FW_T_HRATE_FF) TODO - TODO + TODO @@ -12766,103 +12503,103 @@ Is this really what you want? ParameterEditor - - Search: - 검색: - - - + Clear 지우기 - + Show modified only 편집된 부분만 보기 - + Tools 도구 - + Refresh 새로고침 - + Reset all to firmware's defaults 펌웨어 기본값으로 재설정 - - + + Reset All 모두 초기화 - + Reset to vehicle's configuration defaults 기체의 구성 기본값으로 리셋 - + Load from file... 파일로부터 불러오기... - + Load Parameters 파라미터 불러오기 - + Save to file... 다른이름으로 저장... - + Save Parameters 파라미터 저장 - + Clear all RC to Param RC를 Param으로 초기화 - + All Files (*) 모든 파일 (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - Select Reset to reset all parameters to their defaults. + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle 기체 재부팅 - + Parameter Files (*.%1) 파라미터파일 (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. 재설정을 선택하면 모든 파라미터가 기체의 구성 기본값으로 재설정됩니다. - + Select Ok to reboot vehicle. 확인을 눌러 기체를 재부팅하십시오. @@ -12870,12 +12607,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 파일을 생성할 수 없습니다: %1 - + Unable to open file: %1 파일 열기에 실패하였습니다: %1 @@ -12883,72 +12620,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: 최소: - + Max: 최대: - + Default: 기본값: - - Parameter name: - 파라미터 이름: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. 경고: 비행 중 값을 수정하는 것은 불안정 또는 기체의 손상으로 이어질 수 있습니다. - + Make sure you know what you are doing and double-check your values before Save! 저장하기 전 원하는 값이 설정되었는지 다시 한번 확인해주십시오. - + Force save (dangerous!) 강제로 저장하기(위험합니다!) - + Advanced settings 고급 설정 - + Manual Entry 수동 입력 - + Set RC to Param RC를 파라미터로 설정... @@ -12956,39 +12688,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 파라미터 쓰기 실패: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 파라미터 읽기 실패: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed 파라미터 캐쉬 CRC 불일치 - + Parameters not loaded since they are not currently on the vehicle: %1 - Parameters not loaded since they are not currently on the vehicle: %1 + Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 - Parameters not loaded due to type mismatch: %1 + Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1이(가) 기체 %2(으)로부터 파라미터를 모두 불러오는데 실패하였습니다. 이는 %1이(가) 사용자 인터페이스를 모두 표시할 수 없었기 때문에 발생한 문제입니다. 만일 수정된 펌웨어를 사용하는 경우 기체 시작오류를 해결해야합니다. 표준 펌웨어를 사용하는경우 펌웨어를 업그레이드하는것이 문제를 해결할 수 있습니다. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. 기체 %1이(가) 파라미터 요청에 응답하지 않았습니다. 이로인해 %2에서 전체 사용자 인터페이스를 표시할 수 없습니다. @@ -13053,7 +12785,7 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Video Grid Lines - Video Grid Lines + Video Grid Lines @@ -13134,178 +12866,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone 미션 항목 내부 통신오류: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. 미션 요청 목록 실패, 최대 시도회수를 초과했습니다. - + Retrying %1 REQUEST_LIST retry Count %1 재시도 중, REQUEST_LIST 재시도 횟수 - + Mission read failed, maximum retries exceeded. 미션 읽기 실패, 최대 시도회수를 초과했습니다. - + Retrying %1 MISSION_REQUEST retry Count %1 재시도 중, MISSION_REQUEST 재시도 횟수 - + Mission write failed, vehicle failed to send final ack. 미션 쓰기 실패, 기체가 최종 승인 신호를 보내는데 실패하였습니다. - + Mission write mission count failed, maximum retries exceeded. 미션 쓰기 실패, 최대 시도회수 초과 - + Vehicle did not request all items from ground station: %1 기체가 지상국 %1(으)로 모든 항목을 요청하지 않았습니다. - + Mission remove all, maximum retries exceeded. 모든 미션 지우기의 최대 시도회수를 초과하였습니다. - + Retrying %1 MISSION_CLEAR_ALL retry Count %1 재시도 중, MISSION_CLEAR_ALL 재시도 횟수 - + Vehicle did not respond to mission item communication: %1 기체가 미션 항목 통신 %1에 반응하지 않습니다. - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. 기체 요청항목이 범위를 초과하였습니다: 요청 %1:%2. 기체에 보내기가 실패했습니다. - + Vehicle remove all failed. Error: %1 기체에서 모든 임무 요소 삭제 실패. 오류: %1 - + Item #%1 Command: %2 아이템 #%1 명령: %2 - + Frame: %1 프레임: %1 - - - - - - - + + + + + + + Value: %1 값: %1 - + Mission accepted. 임무 수락됨. - + Unspecified error. 정의되지 않은 오류. - + Coordinate frame is not supported. 지원하지 않는 좌표 프레임. - + Command is not supported. 지원하지 않는 명령입니다. - + Mission item exceeds storage space. 미션 아이템 갯수가 저장 공간을 초과하였습니다. - + One of the parameters has an invalid value. 매개 변수 중 하나에 잘못된 값이 있습니다. - + Param 1 invalid value. 파라미터 1이 올바르지 않은 값입니다. - + Param 2 invalid value. 파라미터 2가 올바르지 않은 값입니다. - + Param 3 invalid value. 파라미터 3이 올바르지 않은 값입니다. - + Param 4 invalid value. 파라미터 4가 올바르지 않은 값입니다. - + Param 5 invalid value. 파라미터 5가 올바르지 않은 값입니다. - + Param 6 invalid value. 파라미터 6이 올바르지 않은 값입니다. - + Param 7 invalid value. 파라미터 7이 올바르지 않은 값입니다. - + Received mission item out of sequence. 순서에서 벗어난 미션 아이템을 받았습니다. - + Not accepting any mission commands. - Not accepting any mission commands. + Not accepting any mission commands. - + Unknown error: %1. 알 수 없는 오류: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. 기체가 오류 %1(을)를 반환했습니다. %2 기체는 안내 항목을 수락하지 않았습니다. @@ -13358,27 +13090,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint 선택된 경로지점 - + Alt diff: 고도차: - + Azimuth: 방위각: - + Distance: 거리: - + Gradient: 기울기: @@ -13394,47 +13126,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: 진행방향: - + Total Mission 전체 미션 - + Max telem dist: 최대 텔레메트리 거리: - + Time: 시간: - + Battery 배터리 - + Batteries required: 배터리가 필요함: - + Upload Required 업로드가 필요합니다 - + Upload 업로드 @@ -13447,122 +13179,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al 기체가 현재 시동되어 있습니다. 기체에 미션을 업로드하곘습니까? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? 미션 항목의 기본 고도설정을 변경하였습니다. 현재 미션의 다른 항목에도 적용하시겠습니까? - + You need at least one item to create a KML. KML을 생성하기 위해서 하나이상의 항목을 선택해야합니다 - + Plan is waiting on terrain data from server for correct altitude values. 비행계획의 정확한 고도정보를 위해 서버로부터 지형데이터를 다운로드하고 있습니다 - + Plan Upload 계획 업로드 - + Select Plan File 계획 파일 선택 - + Save Plan 계획을 저장합니다 - + Save KML KML 저장 - + File 파일 - + Waypoint 경로지점 - + ROI ROI - + Pattern 패턴 - + Center 중앙 - + Plan 계획 - + Apply new altitude - Apply new altitude + Apply new altitude - + Plan View - Vehicle Disconnected 플랜 뷰 - 기체 연결 해제 됨 - + Plan View - Vehicle Changed 플랜 뷰 - 활성 기체 바뀜 - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? Plan View에서 현재 계획 중인 기체를 더 이상 사용할 수 없습니다. 무엇을 하시겠습니까? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? Plan View에서 작업 중인 미션은 현재 차량의 미션이 아닙니다. 무엇을 하시겠습니까? - + Discard Unsaved Changes 저장되지 않은 변경 사항 삭제. - + Discard Unsaved Changes, Load New Plan From Vehicle 저장하지 않은 변경 사항 삭제, 연결 된 기체에서 플랜 가져오기. - + Load New Plan From Vehicle 연결된 기체에서 플랜 가져오기 - + Keep Current Plan 현재 플랜 유지 - + Keep Current Plan, Don't Update From Vehicle 현재 플랜 유지, 기체에 업로드 하지 않음 - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13571,191 +13303,181 @@ Click 'Ok' to upload the Plan anyway. 'Ok'를 클릭하면 플랜을 업로드합니다. - + Send To Vehicle 기체에 전송 - + Current mission must be paused prior to uploading a new Plan 새 플랜을 업로드하기 전에 현재 플랜을 일시 중지 해야 합니다. - + Fly 비행 - + Takeoff 이륙 - + Rally Point 랠리 포인트 - + Cancel ROI ROI 취소 - + Return 복귀 - + Land 착륙 - - + + Mission 미션 - + Fence 울타리 - - + + Rally 랠리 - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? 저장되지 않았거나 전송되지 않은 변경사항이 있습니다. '기체에서 불러오기'는 이런 변경사항을 잃게 합니다. 정말로 기체에서 불러오시겠습니까? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? 저장되지 않았거나 전송되지 않은 변경사항이 있습니다. '파일에서 불러오기'는 이런 변경사항을 잃게 합니다. 정말로 파일에서 불러오시겠습니까? - - + + Clear 지우기 - + Are you sure you want to remove all mission items and clear the mission from the vehicle? 정말로 모든 미션 항목을 지우고, 기체에서 미션을 지우시겠습니까? - + Create complex pattern: 복잡한 패턴 생성: - + You have unsaved changes. 변경내용이 저장되지 않았습니다. - + Open... 열기... - - - + + + Save 저장 - - + + Unable to %1 라이딩 종료 불가 - + Plan has incomplete items. Complete all items and %1 again. 플랜에 불완전한 항목이 있습니다. 모든 항목과 %1을(를)다시 완료하십시오. - + Are you sure you want to remove current plan and create a new plan? 정말로 모든 항목을 삭제하고 새 계획을 만드시겠습니까? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. 변경내용이 저장되지 않았습니다. 변경사항을 기체에 업로드하거나 파일에 저장하십시오: - - + + Create Plan 플랜 생성 - + Storage 저장공간 - + Save As... 다른이름으로 저장... - + Save Mission Waypoints As KML... 미션 경로지점을 KML로 저장하기... - + KML KML - - - + + + Upload 업로드 - + Vehicle 기체 - + Download 다운로드 @@ -13801,34 +13523,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - %1을(를) 추가하기 위해 클릭 - - - - - Right Click to end polygon - - 다각형 생성을 종료하려면 마우스 오른쪽 클릭 - - - - Click to add point - 꼭지점을 추가하려면 클릭 - - - - Click to add point - Right Click to end polygon - 꼭지점을 추가하려면 클릭 - 다각형 생성을 종료하려면 마우스 오른쪽 클릭 - - - - Adjust polygon by dragging corners - 다각형의 꼭지점을 드래그하여 조정 - - PowerComponent @@ -14383,46 +14077,39 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> %1을(를) 루트 계정으로 실행하고 있습니다. 이러한 %1와(과) 문제를 일으킬 수 있기 때문에 실행할 수 없습니다. %1을(를) 종료합니다. Ubuntu에서 시리얼 포트 관련 문제가 있다면 다음 명령이 문제를 해결할 수 있습니다: sudo usermod -a -G dialout $USER sudo apt-get remove modemmanager - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. %1의 저장된 설정의 포맷이 수정되었습니다. 저장된 설정이 기본값으로 재설정되었습니다. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - 텔레메트리 로그를 저장할 수 없습니다. 텔레메트리를 '%1': '%2'에 복사하는 중 오류가 발생했습니다. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 펌웨어로부터 파라미터를 찾을 수 없습니다. 펌웨어의 버전이 QGC와 올바르게 작동하지 않거나 펌웨어에 버그가 있을 수 있습니다. 찾을 수 없는 파라미터: %1 - + There is a newer version of %1 available. You can download it from %2. 새로운 버전 %1이 있습니다. %2에서 다운로드 할 수 있습니다. - + New Version Available 새로운 버전이 있습니다 + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - 텔레메트리 로그를 저장할 수 없습니다. 저장할 위치를 선택해주십시오. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - 텔레메트리 로그를 저장할 수 없습니다. 텔레메트리 저장 디렉토리 "%1"가 존재하지 않습니다. + + Database Not Initialized + Database Not Initialized @@ -14436,32 +14123,32 @@ sudo apt-get remove modemmanager QGCCorePlugin - + Vibration 진동 - + Log Download 로그 다운로드 - + GeoTag Images 이미지에 지도정보 추가 - + MAVLink Console Mavlink 콘솔 - + MAVLink Inspector MAVLink 탐색기 - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? 경고: 고급설정을 시작합니다. 잘못된 사용으로 인해 기체의 고장을 일으킬 수 있으며 안정성을 보장하지 않습니다. 고객지원에 의해서만 활성화 시키십시오. 고급설정을 여시겠습니까? @@ -14519,178 +14206,170 @@ sudo apt-get remove modemmanager QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. - Unabled to find writable download location. Tried downloads and temp directory. + Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 다운로드된 파일을 %1에 저장할 수 없습니다. 오류: %2 - + Download cancelled 다운로드 취소 - + Error: File Not Found 오류: 파일을 찾을 수 없습니다 - + Error during download. Error: %1 다운로드 중 오류. 오류: %1 - - QGCLogEntry - - - Pending - 대기 중 - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14698,24 +14377,16 @@ sudo apt-get remove modemmanager QGCMAVLinkSystem - + Comp All 모든 컴포넌트 - + Comp %1 컴포넌트 %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14731,12 +14402,12 @@ sudo apt-get remove modemmanager Polygon Tools - Polygon Tools + Polygon Tools Click in the map to add vertices. Click 'Done Tracing' when finished. - Click in the map to add vertices. Click 'Done Tracing' when finished. + Click in the map to add vertices. Click 'Done Tracing' when finished. @@ -14772,7 +14443,7 @@ sudo apt-get remove modemmanager Done Tracing - Done Tracing + Done Tracing @@ -14795,7 +14466,7 @@ sudo apt-get remove modemmanager Click in the map to add vertices. Click 'Done Tracing' when finished. - Click in the map to add vertices. Click 'Done Tracing' when finished. + Click in the map to add vertices. Click 'Done Tracing' when finished. @@ -14820,7 +14491,7 @@ sudo apt-get remove modemmanager Done Tracing - Done Tracing + Done Tracing @@ -14844,83 +14515,83 @@ sudo apt-get remove modemmanager QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14928,60 +14599,116 @@ sudo apt-get remove modemmanager QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 비트 - + 64 bit 64 비트 - + (AMSL) (AMSL) - + (CalcT) - (CalcT) + (CalcT) - + AMSL ASML - + Calc Above Terrain - Calc Above Terrain + Calc Above Terrain - + Mixed Modes - Mixed Modes + Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch 이륙 위치 기준 - + Terrain Frame 지형 구조 @@ -14989,46 +14716,11 @@ sudo apt-get remove modemmanager QObject - - Unknown - 알 수 없음 - - - - Pixhawk - 픽스호크 - - - - SiK Radio - SiK 라디오 - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. 기체에서 Guided모드를 지원하지 않습니다 - - - Follow Me - 따라다니기 - The following required keys are missing: %1 @@ -15112,25 +14804,14 @@ sudo apt-get remove modemmanager RCRSSIIndicator - + RC RSSI Status RC RSSI 상태 - - RC RSSI Data Unavailable - RC RSSI 데이터를 가져올 수 없습니다 - - - - N/A - No data available - 해당 없음 - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15138,17 +14819,17 @@ sudo apt-get remove modemmanager RC To Param - RC To Param + RC To Param Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page. - Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page. + Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page. Waiting on parameter update from Vehicle. - Waiting on parameter update from Vehicle. + Waiting on parameter update from Vehicle. @@ -15183,7 +14864,7 @@ sudo apt-get remove modemmanager Double check that all values are correct prior to confirming dialog. - Double check that all values are correct prior to confirming dialog. + Double check that all values are correct prior to confirming dialog. @@ -15218,8 +14899,19 @@ sudo apt-get remove modemmanager Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. 스틱을 가운데에 두고 스로틀 스틱을 아래로 내려준 후, 확인버튼을 눌러 트림값을 복사하십시오. 확인버튼을 누른 후, 트림값을 0으로 돌려놓으십시오. @@ -15335,18 +15027,18 @@ sudo apt-get remove modemmanager Spektrum 바인드 - - + + Copy Trims 트림 복사 - + Mode 1 모드 1 - + Mode 2 모드 2 @@ -15452,17 +15144,17 @@ Click Next to continue 계속하려면 다음을 눌러주십시오. - + Next 다음 - + Calibrate 캘리브레이션 시작 - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15474,12 +15166,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 랠리: %1 - + Rally Points supports version %1 랠리 포인트는 버전 %1을(를) 지원합니다 @@ -15522,192 +15214,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS - - - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Arm Status Error + Arm Status Error - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + Basic ID + Basic ID - - Altitude Fixed - Altitude Fixed + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Latitude - Latitude + + + Broadcast + Broadcast - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) + + + + Invalid Operator ID + Invalid Operator ID - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Self ID + Self ID @@ -15715,7 +15428,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Rover Initial Checks - Rover Initial Checks + Rover Initial Checks @@ -15725,7 +15438,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Battery mounted and secured? - Battery mounted and secured? + Battery mounted and secured? @@ -15765,7 +15478,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap OK for your platform? - OK for your platform? + OK for your platform? @@ -15876,7 +15589,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Object Detection - Object Detection + Object Detection @@ -15920,7 +15633,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Show obstacle distance overlay - Show obstacle distance overlay + Show obstacle distance overlay @@ -15974,19 +15687,19 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Return To Launch Settings - Return To Launch Settings + Return To Launch Settings Return to launch, then: - Return to launch, then: + Return to launch, then: Telemetry logging to vehicle storage: - Telemetry logging to vehicle storage: + Telemetry logging to vehicle storage: @@ -16403,7 +16116,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap To level the horizon you need to place the vehicle in its level flight position and leave still. - To level the horizon you need to place the vehicle in its level flight position and leave still. + To level the horizon you need to place the vehicle in its level flight position and leave still. @@ -16417,7 +16130,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap ROTATION_NONE indicates component points in direction of flight. - ROTATION_NONE indicates component points in direction of flight. + ROTATION_NONE indicates component points in direction of flight. @@ -16437,7 +16150,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Adjust orientations as needed. ROTATION_NONE indicates component points in direction of flight. - Adjust orientations as needed. + Adjust orientations as needed. ROTATION_NONE indicates component points in direction of flight. @@ -16445,7 +16158,7 @@ ROTATION_NONE indicates component points in direction of flight. Mag %1 Orientation - Mag %1 Orientation + Mag %1 Orientation @@ -16569,7 +16282,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings 시리얼 링크 설정 @@ -16577,24 +16290,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - 데이터를 보낼 수 없습니다 - 링크 %1이(가) 연결되어 있지 않습니다! - - - - Error connecting: Could not create port. %1 - 연결 오류: 포트를 생성할 수 없습니다. %1 - - - - Could not read data - link %1 is disconnected! - 데이터를 읽을 수 없습니다- 링크 %1이(가) 연결되어 있지 않습니다! + + Serial Link Error + Serial Link Error - - Link Error - 링크오류 + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16660,6 +16363,44 @@ ROTATION_NONE indicates component points in direction of flight. 정지 비트 + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16779,57 +16520,57 @@ ROTATION_NONE indicates component points in direction of flight. 메세지 패널 텍스트를 찾을 수 없습니다 - + %1 setup must be completed prior to %2 setup. %1은(는) 반드시 %2이(가) 완료된 후에 진행해야 합니다. - + %1 does not currently support setup of your vehicle type. %1은(는) 현재 기체종류를 지원하지 않습니다 - + Vehicle settings and info will display after connecting your vehicle. 기체 정보 및 설정은 기체와 연결된 후 표시됩니다 - + You are currently connected to a vehicle but it did not return the full parameter list. 현재 기체에 연결되어있으나 전체 파라미터를 읽어 오지 못했습니다 - + As a result, the full set of vehicle setup options are not available. 그러므로, 기체에 대한 모든 설정옵션을 열수 없습니다 - + Summary 기체 정보 - + Firmware 펌웨어 - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick 조이스틱 - + Buttons Buttons - + Parameters 파라미터 @@ -16867,7 +16608,7 @@ ROTATION_NONE indicates component points in direction of flight. Move '%1' %2 to the %3 location. %4 - Move '%1' %2 to the %3 location. %4 + Move '%1' %2 to the %3 location. %4 @@ -16892,7 +16633,7 @@ ROTATION_NONE indicates component points in direction of flight. Transition Direction - Transition Direction + Transition Direction @@ -16907,17 +16648,17 @@ ROTATION_NONE indicates component points in direction of flight. climbout - climbout + climbout Ensure distance from launch to transition direction is far enough to complete transition. - Ensure distance from launch to transition direction is far enough to complete transition. + Ensure distance from launch to transition direction is far enough to complete transition. Ensure clear of obstacles and into the wind. - Ensure clear of obstacles and into the wind. + Ensure clear of obstacles and into the wind. @@ -16927,22 +16668,22 @@ ROTATION_NONE indicates component points in direction of flight. Click in map to set planned Takeoff location. - Click in map to set planned Takeoff location. + Click in map to set planned Takeoff location. Click in map to set planned Launch location. - Click in map to set planned Launch location. + Click in map to set planned Launch location. Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location. - Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location. + Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location. Actual AMSL alt sent: %1 %2 - Actual AMSL alt sent: %1 %2 + Actual AMSL alt sent: %1 %2 @@ -16953,44 +16694,44 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 알 수 없음: %1 - + L 홈 - + Takeoff 이륙 - + Land 착륙 - + Transition Direction - Transition Direction + Transition Direction - + VTOL Land 수직이착륙기(VTOL) 착륙 - + ROI ROI - + Loiter - Loiter + Loiter @@ -17004,7 +16745,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17012,47 +16753,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17083,7 +16824,7 @@ ROTATION_NONE indicates component points in direction of flight. Use the Polygon Tools to create the polygon which outlines the structure. - Use the Polygon Tools to create the polygon which outlines the structure. + Use the Polygon Tools to create the polygon which outlines the structure. @@ -17203,7 +16944,7 @@ ROTATION_NONE indicates component points in direction of flight. Submarine Initial checks - Submarine Initial checks + Submarine Initial checks @@ -17213,7 +16954,7 @@ ROTATION_NONE indicates component points in direction of flight. All seals in place? - All seals in place? + All seals in place? @@ -17302,7 +17043,7 @@ ROTATION_NONE indicates component points in direction of flight. Use the Polygon Tools to create the polygon which outlines your survey area. - Use the Polygon Tools to create the polygon which outlines your survey area. + Use the Polygon Tools to create the polygon which outlines your survey area. @@ -17409,7 +17150,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP 링크 설정 @@ -17417,20 +17158,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - 링크 오류 + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected - - Error on link %1. Connection failed - 링크 %1 오류. 연결에 실패하였습니다 + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 - - Error on link %1. Error on socket: %2. - 링크 %1 오류. 소켓 %2 오류. + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17465,48 +17228,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status 텔레메트리 RSSI 상태 - + Local RSSI: 로컬 RSSI: - - + + dBm dBm - + Remote RSSI: 원격 RSSI: - + RX Errors: 수신 오류: - + Errors Fixed: 오류 검출: - + TX Buffer: TX 버퍼: - + Local Noise: 로컬 노이즈: - + Remote Noise: 원격 노이즈: @@ -17698,7 +17461,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17727,7 +17490,7 @@ ROTATION_NONE indicates component points in direction of flight. Done - Done + Done @@ -17747,12 +17510,12 @@ ROTATION_NONE indicates component points in direction of flight. Spacing - Spacing + Spacing Rotate Entry Point - Rotate Entry Point + Rotate Entry Point @@ -17814,7 +17577,7 @@ ROTATION_NONE indicates component points in direction of flight. Preset name cannot include the "/" character. - Preset name cannot include the "/" character. + Preset name cannot include the "/" character. @@ -17866,7 +17629,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP 링크 세팅 @@ -17874,123 +17637,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP 링크 오류 - - Error binding UDP port: %1 - UDP 포트 바인딩 오류: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Zeroconf 등록오류 + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18110,24 +17910,24 @@ ROTATION_NONE indicates component points in direction of flight. 온도 - + Choose the measurement units you want to use. You can also change it later in General Settings. 측정단위계를 선택하십시오. 일반설정에서도 변경할 수 있습니다. - + System of units - System of units + System of units - + Metric System 미터법 - + Imperial System - Imperial System + Imperial System @@ -18245,7 +18045,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Initial Checks - VTOL Initial Checks + VTOL Initial Checks @@ -18328,10 +18128,10 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - VTOL Landing + VTOL Landing - + %1 complex item version %2 not supported %1의 복합 항목 버전 %2은(는) 지원되지 않습니다 @@ -18356,81 +18156,81 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - Use loiter to altitude + Use loiter to altitude - - + + Altitude 고도 - + Radius 반지름 - + Loiter clockwise 반시계방향 회전 - + Landing point 착륙 위치 - + Heading 진행방향 - + Landing Dist 착륙 거리 - + Altitudes relative to launch 시작지점과의 상대 고도 - + Camera 카메라 - + * Actual flight path will vary. - * Actual flight path will vary. + * Actual flight path will vary. - + * Avoid tailwind on approach to land. - * Avoid tailwind on approach to land. + * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. - * Ensure landing distance is enough to complete transition. + * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. 지도에서 착륙위치를 클릭해주십시오. - + - or - - 또는 - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done 완료 @@ -18438,183 +18238,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter 로이터 - + Approach 어프로치 - + Land 착륙 - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - 수직이착륙기(VTOL): 고정익 - - - - VTOL: Multi-Rotor - 수직이착륙기(VTOL): 멀티로터 - - Vehicle - + Mission transfer failed. Error: %1 미션 포인트 전송에 실패했습니다. 오류: %1 - + GeoFence transfer failed. Error: %1 지오펜스 포인트 전송에 실패했습니다. 오류: %1 - + Rally Point transfer failed. Error: %1 랠리 포인트 전송에 실패했습니다. 전송을 다시 시도합니다. 오류: %1 - + battery %1 level low 배터리 %1 잔량이 낮습니다. - + battery %1 level is critical 배터리 %1 잔량이 거의 없습니다. - + battery %1 level emergency 배터리 %1 심각 상태 - + battery %1 failed 배터리 %1 실패 - + battery %1 unhealthy 배터리 %1 위험 - + warning 경고 - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 기체 %1 - + Vehicle reboot failed. 기체 재부팅 실패. - + %1 %2 flight mode %1 %2 비행모드 - + armed 시동됨 - + disarmed 시동 꺼짐 - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. 명령을 보낼 수 없음: %1 - + Internal error - MAV_COMP_ID_ALL not supported - Internal error - MAV_COMP_ID_ALL not supported + Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. - Waiting on previous response to same command. + Waiting on previous response to same command. - + Vehicle did not respond to command: %1 기체가 명령에 응답 하지 않습니다: %1 - + Bootloader flash succeeded 부트로더 설치가 완료되었습니다 - + %1 command temporarily rejected %1 명령이 일시적으로 거절되었습니다 - + %1 command denied %1 명령이 불가합니다 - + %1 command not supported %1 명령이 지원되지 않습니다 - + %1 command failed %1 명령이 실패하였습니다 @@ -18622,42 +18404,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship - Airship + Airship - + Fixed Wing 고정익 - + Rover-Boat 로버-보트 - + Sub 잠수정 - + Multi-Rotor 멀티로터 - + VTOL 수직이착륙기(VTOL) - + Generic 일반 - + Unknown 알 수 없음 @@ -18665,49 +18447,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link - %1Communication regained on %2 link + %1Communication regained on %2 link - - + + primary 기본 - - + + secondary 세컨더리 - + %1Communication regained %1통신이 다시 연결되었습니다 - + %1Switching communication to new primary link - %1Switching communication to new primary link + %1Switching communication to new primary link - + %1Communication lost on %2 link. - %1Communication lost on %2 link. + %1Communication lost on %2 link. - + %1Switching communication to secondary link. - %1Switching communication to secondary link. + %1Switching communication to secondary link. - + %1Communication lost %1통신이 끊겼습니다 - + Comm Lost 통신 연결 끊김 @@ -18815,22 +18597,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - 비디오 리시버가 준비되지 않았습니다. - - - + Invalid video format defined. 잘못된 비디오 형식입니다. - + Unabled to record video. Video save path must be specified in Settings. 비디오를 녹화할 수 없습니다. 비디오 녹화경로가 지정되지 않았습니다. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18838,142 +18615,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available 비디오 사용 불가 - + Video Stream Disabled 비디오 스트림 비활성화 - + RTSP Video Stream RTSP 비디오 스트림 - + UDP h.264 Video Stream UDP h.264 비디오 스트림 - + UDP h.265 Video Stream UDP h.265 비디오 스트림 - + TCP-MPEG2 Video Stream TCP-MPEG2 비디오 스트림 - + MPEG-TS (h.264) Video Stream MPEG-TS(h.264) 비디오 스트림 - + 3DR Solo (requires restart) 3DR Solo (재시작 필요) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_nl_NL.ts b/translations/qgc_source_nl_NL.ts index d9de02b5730..7d1dd0e9080 100644 --- a/translations/qgc_source_nl_NL.ts +++ b/translations/qgc_source_nl_NL.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_no_NO.ts b/translations/qgc_source_no_NO.ts index 69a5f863bd8..5ffb30f0029 100644 --- a/translations/qgc_source_no_NO.ts +++ b/translations/qgc_source_no_NO.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_pl_PL.ts b/translations/qgc_source_pl_PL.ts index e4c72bfe60a..393b519e144 100644 --- a/translations/qgc_source_pl_PL.ts +++ b/translations/qgc_source_pl_PL.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_pt_PT.ts b/translations/qgc_source_pt_PT.ts index 079336d9c97..4d00583e4a4 100644 --- a/translations/qgc_source_pt_PT.ts +++ b/translations/qgc_source_pt_PT.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - Erro de Servidor ADSB: %1 - - APMAirframeComponent @@ -109,7 +101,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 AVISO: O controlador de voo que você está usando tem um comunicado de serviço crítico contra ela que não aconselha o voo. Para mais detalhes: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -117,30 +109,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -487,66 +484,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Erro durante a configuração da ligação de vídeo do Solo - + Unable to change altitude, vehicle altitude not known. Não foi possível alterar a altitude, altitude do veículo desconhecida. - + Unable to pause vehicle. Não foi possível pausar o veículo. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Veículo não suporta decolagem guiada - + Unable to takeoff, vehicle position not known. Não é possível decolar, a posição do veículo é desconhecida. - + Unable to takeoff: Vehicle failed to change to Guided mode. Não foi possível descolar: Veículo não conseguiu mudar para o modo Guiado. - + Unable to takeoff: Vehicle failed to arm. Não foi possível decolar: Veículo falhou em armar. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Não foi possível iniciar a missão: Veículo falhou em mudar para o modo Automático. - + Unable to start mission: Vehicle failed to change to Guided mode. Não foi possível iniciar a missão: Veículo falhou em mudar para o modo guiado. - + Unable to start mission: Vehicle failed to arm. Não foi possível iniciar a missão: Veículo falhou em armar. - - - Follow failed: Home position not set. - Seguir falhou: Posição inicial não definida. - - - - Follow failed: Ground station cannot provide required position information. - Seguir falhou: Estação terreste não pode fornecer as informações de posição necessárias. - APMFlightModeIndicator @@ -858,42 +870,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Siga-me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - A configuração do Siga-me é usada para configurar o suporte para o veículo seguir a localização da estação terrestre. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Monitor Batt1 + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Capacidade Batt1 + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Monitor Batt2 + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Capacidade Batt2 + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1174,8 +1206,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1183,12 +1215,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1857,25 +1889,25 @@ - + - + Return to Launch Retornar para Posição Inicial - + - + Return at current altitude Retornar na altitude atual - + - + Return at specified altitude: Retornar na altitude especificada: @@ -1898,14 +1930,14 @@ Velocidade do último estágio de pouso - - + + Arming Checks Verificações para Armar - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Atenção: Desativar as verificações de armamento pode levar à perda de controle do veículo. @@ -2080,42 +2112,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Gatilhos de Falha Segura - + Throttle PWM threshold: Limiar PWM do Acelerador: - + Voltage threshold: Limiar de Tensão: - + MAH threshold: Limiar MAH: - + GCS failsafe Falha segura GCS - + Return to Launch Retornar para posição inicial - + Return at current altitude Retornar na altitude atual - + Return at specified altitude: Retornar na altitude especificada: @@ -2510,34 +2542,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Falha Segura Acelerador: - - - + + + Disabled Desabilitado - + Voltage failsafe: Falha Segura Tensão: - + mAh failsafe: Falha Segura mAh: - + RTL min alt: alt mín RTL - + current atual @@ -3469,12 +3501,12 @@ Por favor coloque seu veículo na água, clique no botão, e espere. Note que os APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Por favor coloque seu veículo na água, clique no botão, e espere. Note que os Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4060,14 +4100,6 @@ Por favor coloque seu veículo na água, clique no botão, e espere. Note que os Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4137,7 +4169,7 @@ Por favor coloque seu veículo na água, clique no botão, e espere. Note que os AppLogModel - + Open console log output file failed %1 : %2 Falha ao abrir o arquivo de registros de saída do console %1 : %2 @@ -4155,17 +4187,17 @@ Por favor coloque seu veículo na água, clique no botão, e espere. Note que os Categorias de registros - + Search: Buscar: - + Clear Limpar - + Clear All Limpar Tudo @@ -4243,348 +4275,712 @@ Por favor coloque seu veículo na água, clique no botão, e espere. Note que os CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Parcial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armado + + Stabilize + Stabilize - - Disarmed - Desarmado + + Acro + Acro - - Arm - Armar + + Altitude Hold + Altitude Hold - - Disarm - Desarmar + + Auto + Auto - - - AudioOutput - - negative - negativo + + Guided + Guided - - point - ponto + + Loiter + Loiter - - meters - metros + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - Um ou mais componentes do veículo precisam ser configurados antes do voo. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autoajuste: Em andamento + + Land + Land - - Autotune: initializing - Autoajuste: inicializando + + Drift + Drift - - Autotune: roll - Autoajuste: rolagem + + Sport + Sport - - Autotune: pitch - Autoajuste: arfagem + + Flip + Flip - - Autotune: yaw - Autoajuste: guinada + + Autotune + Autotune - - Wait for disarm - Espere pelo desarme + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Pouse e desarme o veículo para aplicar os parâmetros. + + Brake + Brake - - Autotune: in progress - Autoajuste: Em andamento + + Throw + Throw - - Autotune: Success - Autoajuste: Sucesso + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autoajuste: Sucesso + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autoajuste: Erro desconhecido + + Smart RTL + Smart RTL - - Autotune: Failed - Autoajuste: Falha + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autoajuste: erro Ack %1 + + Follow + Follow - - Autotune: Not performed - Autoajuste: Não realizado + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Não mapeado + + AutoRTL + AutoRTL - - - BatteryIndicator - - 100% - 100% + + Turtle + Turtle + + + ArduPlaneFirmwarePlugin - - - n/a - n/a + + Manual + Manual - - Battery %1 - Bateria %1 + + Circle + Circle - - Status - Status + + Stabilize + Stabilize - - Charge State - Estado do carregamento + + Training + Training - - - Remaining - Restante + + Acro + Acro - - Voltage - Tensão + + FBW A + FBW A - - Consumed - Consumido + + FBW B + FBW B - - Temperature - Temperatura + + Cruise + Cruise - - Function - Função + + Autotune + Autotune - - Battery Display - Battery Display + + Auto + Auto - - Vehicle Power - Vehicle Power + + RTL + RTL - - Configure - Configure + + Loiter + Loiter - - Power - Power + + Takeoff + Takeoff - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Avoid ADSB + Avoid ADSB - - Battery %1 - Battery %1 + + Guided + Guided - - Charge State - Charge State + + Initializing + Initializing - - - Remaining - Remaining + + QuadPlane Stabilize + QuadPlane Stabilize - - Voltage - Voltage + + QuadPlane Hover + QuadPlane Hover - - Consumed - Consumed + + QuadPlane Loiter + QuadPlane Loiter - - Temperature - Temperature + + QuadPlane Land + QuadPlane Land - - Function - Function + + QuadPlane RTL + QuadPlane RTL - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane AutoTune + QuadPlane AutoTune - - - BluetoothConfiguration - - Bluetooth Link Settings - Configurações da conexão Bluetooth + + QuadPlane Acro + QuadPlane Acro - - Bluetooth Not Available - Bluetooth não disponível + + Thermal + Thermal - BluetoothLink + ArduRoverFirmwarePlugin - - Bluetooth Link Error - Erro na conexão Bluetooth + + Manual + Manual - - - BluetoothSettings - - Device - Dispositivo + + Acro + Acro - - Address - Endereço + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armado + + + + Disarmed + Desarmado + + + + Arm + Armar + + + + Disarm + Desarmar + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + Um ou mais componentes do veículo precisam ser configurados antes do voo. + + + + Autotune + + + Autotune: In progress + Autoajuste: Em andamento + + + + Autotune: initializing + Autoajuste: inicializando + + + + Autotune: roll + Autoajuste: rolagem + + + + Autotune: pitch + Autoajuste: arfagem + + + + Autotune: yaw + Autoajuste: guinada + + + + Wait for disarm + Espere pelo desarme + + + + Land and disarm the vehicle in order to apply the parameters. + Pouse e desarme o veículo para aplicar os parâmetros. + + + + Autotune: in progress + Autoajuste: Em andamento + + + + Autotune: Success + Autoajuste: Sucesso + + + + Autotune successful. + Autoajuste: Sucesso + + + + Autotune: Unknown error + Autoajuste: Erro desconhecido + + + + Autotune: Failed + Autoajuste: Falha + + + + Autotune: Ack error %1 + Autoajuste: erro Ack %1 + + + + Autotune: Not performed + Autoajuste: Não realizado + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Não mapeado + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Bateria %1 + + + + Status + Status + + + + Charge State + Estado do carregamento + + + + + Remaining + Restante + + + + Voltage + Tensão + + + + Consumed + Consumido + + + + Temperature + Temperatura + + + + Function + Função + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings + Configurações da conexão Bluetooth + + + + Bluetooth Not Available + Bluetooth não disponível + + + + BluetoothLink + + + Bluetooth Link Error + Erro na conexão Bluetooth + + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + + + + BluetoothSettings + + + Device + Dispositivo + + + + Address + Endereço @@ -4602,6 +4998,34 @@ Click Ok to start the auto-tuning process. Parar + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4782,27 +5206,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Largura - + Height Altura - + Sensor Sensor - + Image Imagem - + Focal length Distância focal @@ -4810,27 +5234,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Selecione um: - + Grnd Res Grnd Res @@ -5092,7 +5516,7 @@ Click Ok to start the auto-tuning process. Componente %1 - + Internal Error: Parameter MetaData major must be 1 Erro Interno: MetaDados principal dos Parâmetros deve ser maior que 1 @@ -5100,13 +5524,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. Este padrão não suporta predefinições. - + '%1' is a built-in preset which cannot be deleted. '%1' é uma prédefinição embutida que não pode ser deletada. @@ -5176,18 +5600,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5557,14 +5981,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Fechar - - FTPManager @@ -5618,53 +6034,58 @@ Click Ok to start the auto-tuning process. Defina para a localização do veículo - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Raio - + Loiter clockwise Loiter no sentido horário - + Landing point Ponto de Pouso - + Heading Direção - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relativas a posição inicial. - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Pronto - + Camera Câmera @@ -5679,32 +6100,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distância - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * O caminho real de voo irá variar. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Clique no mapa para definir o ponto de pouso. - + - or - - ou - @@ -5712,22 +6133,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Aproximação - + Landing Area Área de Pouso - + Glide Slope Glide Slope @@ -5795,23 +6216,10 @@ Click Ok to start the auto-tuning process. Número inválido - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Valor Inválido - - - + Value Details Detalhes do Valor @@ -5868,22 +6276,22 @@ Click Ok to start the auto-tuning process. Firmware Class - + PX4 Pro PX4 Pro - + ArduPilot ArduPilot - + Generic Genérico - + Unknown Desconhecido @@ -5993,376 +6401,8 @@ Click Ok to start the auto-tuning process. FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 - - - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 - - - - a7r III 35mm - a7r III 35mm - - - - a7r IV 35mm - a7r IV 35mm - - - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 - - - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 - - - - DSC-RX0 - DSC-RX0 - - - - Sony DSC-RX0 - Sony DSC-RX0 - - - - DSC-RX1R II 35mm - DSC-RX1R II 35mm - - - - ILCE-QX1 - ILCE-QX1 - - - - Sony ILCE-QX1 - Sony ILCE-QX1 - - - - NEX-5R 20mm - NEX-5R 20mm - - - - Sony NEX-5R 20mm - Sony NEX-5R 20mm - - - - RX100 II 28mm - 28mm RX100 II - - - - Sony RX100 II 28mm - Sony RX100 II 28mm - - - - - - - Yuneec - Yuneec - - - - CGOET - CGOET - - - - Yuneec CGOET - CGOET Yuneec - - - - E10T - E10T - - - - Yuneec E10T - Yuneec E10T - - - - E50 - E50 - - - - Yuneec E50 - Yuneec E50 - - - - E90 - E90 - - - - Yuneec E90 - Yuneec E90 - - - - - Flir - Flir - - - - Duo R - Duo R - - - - Flir Duo R - Flir Duo R - - - - Duo Pro R - Duo Pro R - - - - - Workswell - Workswell - - - - - Wiris Security - Wiris Security - - - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Veículo não está rodando o último firmware estável! Executando %1, o mais recente é o %2. @@ -6380,11 +6420,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Configuração de Firmware - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 pode atualizar o firmware em dispositivos Pixhawk, Rádios SiK e Câmeras PX4 Flow Smart - Update the autopilot firmware to the latest version @@ -6396,7 +6431,7 @@ Click Ok to start the auto-tuning process. Todas as conexões de %1 com veículos devem ser - + Upgrade cancelled Atualização cancelada @@ -6405,6 +6440,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Selecionar Arquivo de Firmware + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6491,162 +6531,144 @@ Click Ok to start the auto-tuning process. Dispositivo encontrado - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Versão Padrão (estável) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Arquivo de firmware personalizado... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Versão padrão - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Placa PX4 Flow detectada. O firmware utilizado na PX4 Flow deve corresponder ao tipo do firmware do AutoPilot que você está usando no veículo: - - - + Detected Pixhawk board. You can select from the following flight stacks: Placa Pixhawk detectada. Você pode selecionar do seguintes conjuntos de voo: - + Press Ok to upgrade your vehicle. Pressione Ok para atualizar seu veículo. - + Downloading list of available firmwares... Baixando lista de firmwares disponíveis... - + No Firmware Available Nenhum Firmware disponível - + Advanced settings Configurações Avançadas - + Select the standard version or one from the file system (previously downloaded): Selecione a versão padrão ou um do sistema de arquivos (previamente baixado): - - Select which version of the firmware you would like to install: - Selecione a versão do firmware que você gostaria de instalar: - - - + Select which version of the above flight stack you would like to install: Selecione a versão do firmware que você gostaria de instalar: - + WARNING: BETA FIRMWARE. AVISO: FIRMWARE BETA. - + This firmware version is ONLY intended for beta testers. Essa versão de firmware é destinada APENAS a testadores beta. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. NÃO use para operação normal. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. Esse firmware NÃO FOI TESTADO EM VOO. - + It is only intended for DEVELOPERS. É destinado apenas para DESENVOLVEDORES. - + Run bench tests without props first. Primeiro execute testes na mesa sem as hélices. - + Do NOT fly this without additional safety precautions. NÃO voe isso sem precauções de segurança adicionais. - + Follow the forums actively when using it. Siga os fóruns ativamente ao utilizá-los. - + Flash ChibiOS Bootloader Flash Bootloader ChibiOS @@ -6654,87 +6676,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Conectar não é permitido durante o Upgrade do Firmware. - + Connected to bootloader: Conectado ao bootloader: - + Version: %1 Versão: %1 - + Board ID: %1 Identificador Placa: - + Flash size: %1 Tamanho da Flash: %1 - + Custom firmware selected but no filename given. Firmware customizado selecionado, mas nenhum nome de arquivo fornecido. - + Unable to find specified firmware for board type Não foi possível encontrar o firmware especificado para esse tipo de placa - + No firmware file selected Nenhum arquivo de firmware selecionado - + Downloading firmware... Baixando firmware... - + From: %1 De: %1 - + Download complete Transferência concluída. - + Image load failed Falha ao Carregar Imagem - + Bootloader not found Bootloader não encontrado - + Image size of %1 is too large for board flash size %2 O tamanho de imagem %1 é muito grande para o tamanho de %2 da flash da placa - + Upgrade complete Atualização completa - + Upgrade cancelled Atualização cancelada - + Choose board type Escolher tipo de placa @@ -6835,7 +6857,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6843,12 +6865,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO ESPERANDO VÍDEO - + VIDEO DISABLED VÍDEO DESATIVADO @@ -6861,15 +6883,6 @@ Click Ok to start the auto-tuning process. Especificar Posição - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7024,26 +7037,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7097,153 +7115,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7314,113 +7332,131 @@ Click Ok to start the auto-tuning process. Clique duas vezes para sair da tela cheia + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7428,7 +7464,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Unidades @@ -7443,39 +7479,39 @@ Click Ok to start the auto-tuning process. Esquema de Cores - + Stream GCS Position Transmitir Posição GCS - + Mute all audio output Silenciar todas as saídas de áudio - + Clear all settings on next start Limpar todas as configurações no próximo início - + Application Load/Save Path Carregar/Salvar Caminho da Aplicação - - - + + + Browse Procurar - + Choose the location to save/load files Escolha o local para salvar/carregar arquivos - + UI Scaling Escala da interface do usuário @@ -7485,43 +7521,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Imagem da Marca - + Indoor Image Imagem interna - - + + Choose custom brand image file Escolher arquivo de imagem com marca personalizada - + Outdoor Image Imagem externa - + Reset Images Reset Images - + Reset Reset @@ -7529,17 +7565,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoCerca suporta versão %1 - + GeoFence polygon not stored as object Polígono da GeoCerca não foi armazenado como objeto - + GeoFence circle not stored as object Círculo da GeoCerca não foi armazenado como objeto @@ -7677,27 +7713,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Imagens já foram marcadas. Imagens existentes serão removidas. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Não foi possível localizar o diretório para salvar. - + Couldn't replace the previously tagged images Não foi possível substituir as imagens marcadas anteriormente. - + Cannot find the save directory. Não foi possível localizar o diretório para salvar. @@ -7705,39 +7759,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Utilizado para marcar um conjunto de imagens em uma missão de varredura com coordenadas GPS. Você deve fornecer um registro binário do voo assim como o diretório que contêm as imagens a serem marcadas. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) Todos os Arquivos (*) - - + + Select image directory Selecione o diretório das imagens - + (Optionally) Select save directory (Opcional) Selecione o diretório para salvar @@ -7747,22 +7801,22 @@ Click Ok to start the auto-tuning process. Selecionar diretório para salvar - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancelar Marcação - + Start Tagging Start Tagging @@ -7770,192 +7824,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format O diretório de imaagens não contêm imagens, tenha certeza de que suas imagens estão no formato JPG - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geo-marca falhou. Não foi possível abrir imagem. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geo-marca falhou. Não foi possível abrir arquivo. - - %1 - tagging cancelled - %1 - marcação cancelada - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geo-marca falhou. Não pode escrever na imagem. - - - - Geotagging failed. Couldn't write to an image. - Geo-marca falhou. Não foi possível escrever em uma imagem. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8069,7 +8130,7 @@ Click Ok to start the auto-tuning process. Ir para Localização - + Return to the launch position of the vehicle. Retorne para a posição de decolagem do veículo. @@ -8124,162 +8185,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Armar o veículo. - + WARNING: This will force arming of the vehicle bypassing any safety checks. ATENÇÃO: Isso irá forçar o armamento do veículo e ignorar todas as verificações de segurança. - + Disarm the vehicle Desarmar o veículo - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. ATENÇÃO: ISSO IRÁ PARAR TODOS OS MOTORES. SE O VEÍCULO ESTÁ ATUALMENTE NO AR ELE IRÁ CAIR. - + Takeoff from ground and hold position. Decola do chão e mantêm na posição especificada. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Decola do chão e inicia a rota atual. - + Continue the mission from the current waypoint. Continua a missão a partir do ponto atual. - + Upload of resume mission failed. Confirm to retry upload Envio da retomada da missão falhou. Confirme para tentar novamente o envio. - + Land the vehicle at the current position. Pouse o veículo na posição atual. - + Change the altitude of the vehicle up or down. Mude a altitude do veículo para cima ou para baixo. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Mova o veículo para a posição especificada. - + Adjust current waypoint to %1. Ajuste o ponto atual para %1. - + Orbit the vehicle around the specified location. Orbitar o veículo ao redor da posição especificada. - + Abort the landing sequence. Aborte a sequência de pouso. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause o veículo na posição atual e ajuste a altitude para cima ou para baixo conforme necessário. - + Pause all vehicles at their current position. Pare todos os veículos na sua posição atual. - + Transition VTOL to fixed wing flight. Transição VTOL para voo de asa fixa. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Faça da localização especificada uma Região de Interesse. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Erro interno: actionCode desconhecido @@ -8319,13 +8390,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8333,99 +8404,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None Nenhum - + Color Cor - + Opacity Opacidade - + Icon Ícone InstrumentValueEditDialog - - - Value Display - Exibição de Valor - Valuec requires a connected vehicle for setup. Valuec necessita de um veículo conectado para configurar. - + Icon Ícone - + Text Texto - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Tamanho - + Show Units Mostrar Unidades - - Range - Intervalo + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Especifique a cor que deseja aplicar baseado nos intervalos do valor. A cor aplicada será aplicada ao ícone se disponível, caso contrário ao valor em si. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Especifique a cor que deseja aplicar baseado nos intervalos do valor. A cor aplicada será aplicada ao ícone se disponível, caso contrário ao valor em si. - - - + + + Add Row Adicionar Linha - + Specify the icon you want to display based on value ranges. Especifique o ícone que deseja mostrar baseado nos intervalos de valor. - + Specify the icon opacity you want based on value ranges. Especifique a opacidade do ícone que deseja baseado nos intervalos de valor. - + Select Icon Selecionar Ícone @@ -8441,152 +8532,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action Sem ação - + Arm Armar - + Disarm Desarmar - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Iniciar gravação de vídeo - + Stop Recording Video Parar a gravação de vídeo - + Toggle Recording Video Alternar Gravação de Vídeo - + Gimbal Down Gimbal para baixo - + Gimbal Up Gimbal Para Cima - + Gimbal Left Esquerdo Gimbal - + Gimbal Right Direito Gimbal - + Gimbal Center Centro Gimbal - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Parada de Emergência - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Próxima Transmissão de Vídeo - + Previous Video Stream Transmissão de Vídeo Anterior - + Next Camera Próxima Câmera - + Previous Camera Câmera Anterior @@ -8757,7 +8848,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8823,29 +8914,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Conectado: - - + + Yes Yes - - + + No No - + Enabled: Habilitado: @@ -8933,12 +9024,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 não suporta carregar esse tipo de item de missão complexo: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Padrão de pouso Asa Fixa: Definir as altitudes de loiter e pouso com diferentes configurações para a altitude relativa não é mais suportado. As duas foram definidas para altitude relativa. Tenha certeza de ajustar/verificar seu plano antes do voo. @@ -8946,12 +9037,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8959,51 +9050,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Conexão não permitida: %1 - - - - + + + %1 on %2 (AutoConnect) %1 em %2 (Conexão Automática) - + Shutdown Desligar - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Link de simulação - + AirLink AirLink - - + + Log Replay Replay de Registro @@ -9011,12 +9106,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Adicionar - + Connect Conectar @@ -9026,93 +9121,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Desconectar - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Nome - + Enter name Inserir nome - + Automatically Connect on Start Conectar automaticamente ao Iniciar - + High Latency Alta Latência - + Type Tipo @@ -9120,216 +9245,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Disponível - - + Canceled Cancelado - - - + + Error Erro - + Downloaded  Baixado - - Timed Out - Tempo excedido - - - + Waiting Esperando - - - UnknownDate - DataDesconhecida - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Download de registro permite baixar arquivos de registro binários do seu veículo. Clique em Atualizar para obter a lista de registros disponíveis. - + Id Id - + Date Data - + Date Unknown Data desconhecida - + Size Tamanho - + Status Estado - + Refresh Atualizar - + Log Refresh Atualizar registros - + You must be connected to a vehicle in order to download logs. Você deve estar conectado a um veículo para baixar os registros. - + Download Baixar - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Selecionar diretório para salvar - + Erase All Apagar tudo - + Delete All Log Files Apagar Todos os Registros - + All log files will be erased permanently. Is this really what you want? Todos os arquivos de registro serão apagados permanentemente. É isso que você realmente quer? - + Cancel Cancelar - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - Você deve fechar todas as conexões antes de reproduzir um log. - - - - Attempt to load new log while log being played - Tentativa de carregar novo log enquanto um está sendo reproduzido - - - - Unable to open log file: '%1', error: %2 - Não foi possível abrir arquivo de log: '%1' erro: %2 - - - - The log file '%1' is corrupt or empty. - O arquivo de log '%1' está corrompido ou vazio. - - - - Connect not allowed during Flight Data replay. - Conectar não é permitido durante a reprodução de dados de voo. - - - - - Unable to seek to new position - Incapaz de procurar uma nova posição - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Arquivo de Log - + Browse Procurar - + Select Telemetery Log Selecionar Log Telemetria - + Telemetry Logs (*.%1) Logs telemetria (*.%1) - + All Files (*) Todos os Arquivos (*) @@ -9362,180 +9436,214 @@ Click Ok to start the auto-tuning process. Todos os Arquivos (*) - + Pause Pausar - + Play Reproduzir - + Load Telemetry Log Carregar Log de Telemetria - + Close Fechar + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Giroscópio - + Accelerometer Acelerômetro - + Magnetometer Magnetômetro - + Absolute pressure Pressão absoluta - + Differential pressure Pressão diferencial - + GPS GPS - + Optical flow Optical flow - + Computer vision position Posição da visão computacional - + Laser based position Posição baseada no Laser - + External ground truth External ground truth - + Angular rate control Controle da taxa angular - + Attitude stabilization Estabilização da atitude - + Yaw position Posição Guinada - + Z/altitude control Controle Z/Altitude - + X/Y position control Controle posição X/Y - + Motor outputs / control Controle / saídas do Motor - + RC receiver Receptor RC - + Gyro 2 Gyro 2 - + Accelerometer 2 Acelerômetro 2 - + Magnetometer 2 Magnetômetro 2 - + GeoFence GeoCerca - + AHRS AHRS - + Terrain Terreno - + Motors reversed Motores revertidos - + Logging Logging - + Battery Bateria - + Proximity Proximidade - + Satellite Communication Comunicação via satélite - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Prevenção de evasão/colisão - + Propulsion Propulsion @@ -9543,7 +9651,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Sensor desconhecido @@ -9564,17 +9672,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9582,79 +9690,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Seg - + 10 Sec 10 Seg - + 30 Sec 30 Seg - + 60 Sec 60 Seg - + Auto Automático - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 Sistema %1 @@ -9800,113 +9908,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - Protocolo MAVLink - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Rádio detectado ainda utiliza MAVLink v1.0 em uma conexão com MAVLink v2.0 habilitada. Por favor, atualize o firmware do rádio. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - Protocolo MAVLink + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Abrir arquivo de Dados de Voo para escrita falhou. Incapaz de escrever em %1. Por favor escolha uma localização diferente para o arquivo. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? AInda existem conexões ativas com veículos. Tem certeza que deseja sair? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? Você está editando uma missão que não foi salva/enviada. Se fechar as mudanças serão perdidas. Você tem certeza que deseja fechar? - - + + Analyze Tools Ferramentas de Análise - - + + Vehicle Setup Configurações do Veículo - - + + Application Settings Configurações da Aplicação - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? Você tem atualizações de parâmetro pendentes para um veículo. Se você fechar você perderá as alterações. Tem certeza de que deseja fechar? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version Versão %1 - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Modo avançado - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Voltar @@ -10058,37 +10153,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10121,17 +10211,12 @@ Click Ok to start the auto-tuning process. pés - - T - T - - - + + + - + - - @@ -10139,162 +10224,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10328,7 +10418,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands Todos os comandos @@ -10394,43 +10484,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Mover para a posição do veículo - + Move to previous item position Mover para posição anterior do item - + Edit position... Editar posição... - + Show all values Mostrar todos os valores - + Mission Edit Editar Missão - + You have made changes to the mission item which cannot be shown in Simple Mode Você fez alterações no item da missão que não pode ser mostrado no Modo Simples - + Item #%1 Item #%1 @@ -10446,7 +10536,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Não foi possível gerar a retomada da missão devido ao comando MAV_CMD_DO_JUMP. @@ -10597,19 +10687,6 @@ Click Ok to start the auto-tuning process. Mock Link Settings - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Limiar: - - MotorAssignment @@ -10727,448 +10804,123 @@ Do you wish to proceed? Motors - Motores - - - - Propellers free? Then throttle up gently. Working properly? - Hélices livres? Então acelere suavemente. Está funcionando corretamente? - - - - Mission - Missão - - - - Please confirm mission is valid (waypoints valid, no terrain collision). - Por favor confirme que a missão é válida (pontos válidos, sem colisão com o terreno). - - - - Last preparations before launch - Últimas preparações antes de decolar - - - - Payload - Carga - - - - Configured and started? Payload lid closed? - Configurado e iniciado? Tampa da carga fechada? - - - - Wind & weather - Vento & clima - - - - OK for your platform? - OK para a sua plataforma? - - - - Flight area - Área de voo - - - - Launch area and path free of obstacles/people? - Região de decolagem e caminho livre de obstáculos/pessoas? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - Os seguintes comandos serão aplicados a todos os veículos - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armado - - - - Disarmed - Desarmado - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Atenção: Um veículo está utilizando a mesma identificação no sistema que %1: %2 - - - - Connected to Vehicle %1 - Conectado ao veículo %1 - - - - MultiVehicleSelector - - - Vehicle - Veículo - - - - OfflineMap - - - Error Message - Mensagem de erro - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memória cache requer a reinicialização para as mudanças tomarem efeito. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - Para habilitar mapas Mapbox, entre com seu token de acesso. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - Para ativar estilos Mapbox customizados, digite o nome de usuário da sua conta. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - Para ativar estilos Mapbox customizados, digite seu identificador de estilos. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - Para habilitar mapas VWorld, entre com seu token de acesso. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - Isso irá deletar todas as seções de mapa INCLUÍNDO as conjuntos de seções de mapa que você criou. - -É isso que você realmente deseja? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Deletar %1 e todos as suas seções de mapa. - -É isso mesmo que você deseja? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Níveis de zoom: - - - - Total: - Total: - - - - Unique: - Único: - - - - Downloaded: - Baixados: - - - - Error Count: - Número de Erros: - - - - Size: - Tamanho: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Retomar transferência - - - - Cancel Download - Cancelar Transferência - - - - Delete - Apagar - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirmar exclusão - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Fechar - - - - - - - Cancel - Cancelar - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Zoom Mínimo: %1 - - - - Max Zoom: %1 - Zoom Máx: %1 + Motores - - - Add New Set - Adicionar Novo Conjunto + + Propellers free? Then throttle up gently. Working properly? + Hélices livres? Então acelere suavemente. Está funcionando corretamente? - - Name: - Nome: + + Mission + Missão - - Map type: - Tipo do mapa: + + Please confirm mission is valid (waypoints valid, no terrain collision). + Por favor confirme que a missão é válida (pontos válidos, sem colisão com o terreno). - - Fetch elevation data - Buscar dados de elevação + + Last preparations before launch + Últimas preparações antes de decolar - - Min/Max Zoom Levels - Níveis de Zoom Mín/Máx + + Payload + Carga - - Est Size: - Tamanho Est: + + Configured and started? Payload lid closed? + Configurado e iniciado? Tampa da carga fechada? - - Too many tiles - Too many tiles + + Wind & weather + Vento & clima - - Download - Transferir + + OK for your platform? + OK para a sua plataforma? - - - Import - Importar + + Flight area + Área de voo - - - Export - Exportar + + Launch area and path free of obstacles/people? + Região de decolagem e caminho livre de obstáculos/pessoas? + + + MultiVehicleList - - Options - Opções + + The following commands will be applied to all vehicles + Os seguintes comandos serão aplicados a todos os veículos - - Offline Maps Options - Opções de mapas offline + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Selecionar Todos + + Armed + Armado - - Select None - Selecionar Nenhum + + Disarmed + Desarmado - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Atenção: Um veículo está utilizando a mesma identificação no sistema que %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Conectado ao veículo %1 + + + MultiVehicleSelector - - Replace existing set - Substituir conjunto existente + + Vehicle + Veículo @@ -11360,6 +11112,14 @@ Is this really what you want? Veículo + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11440,29 +11200,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbitar - + Unknown %1:%2 Desconhecido %1:%2 - + Unable to takeoff, vehicle position not known. Não é possível decolar, a posição do veículo é desconhecida. - + Unable to go to location, vehicle position not known. Não é possível ir até a localização, posição do veículo desconhecida. - + Unable to pause vehicle. Não foi possível pausar o veículo. - + Unable to change altitude, home position unknown. Não foi possível alterar a altitude, posição inicial desconhecida. - + Unable to change altitude, home position altitude unknown. Não foi possível alterar a altitude, altitude da posição inicial desconhecida. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Não foi possível iniciar missão: Veículo rejeitou comando de armar. - + Unable to start mission: Vehicle not changing to %1 flight mode. Não foi possível iniciar missão: Veículo não está mudando o modo de voo %1. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl suporta o firmware PX4 Pro versão %1.%2.%3 e acima. Se você estiver usando uma versão anterior a essa irá levar a resultados imprevisíveis. Por favor atualize seu firmware. @@ -11728,269 +11493,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11999,18 +11736,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12760,78 +12497,78 @@ Is this really what you want? ParameterEditor - - Search: - Buscar: - - - + Clear Limpar - + Show modified only Mostrar somente modificados - + Tools Ferramentas - + Refresh Atualizar - + Reset all to firmware's defaults Redefinir tudo para o padrão do firmware - - + + Reset All Redefinir Tudo - + Reset to vehicle's configuration defaults Redefinir para as configurações padrões do veículo - + Load from file... Carregar do arquivo... - + Load Parameters Carregar Parâmetros - + Save to file... Salvar para arquivo... - + Save Parameters Salvar Parâmetros - + Clear all RC to Param Clear all RC to Param - + All Files (*) Todos os Arquivos (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12840,23 +12577,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as configurações do veículo, configuração e calibrações. - - + + Reboot Vehicle Reiniciar Veículo - + Parameter Files (*.%1) Arquivos de Parâmetros (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Selecione Resetar para redefinir todos os parâmetros para o padrão do veículo. - + Select Ok to reboot vehicle. Clique em Ok para reiniciar o veículo. @@ -12864,12 +12601,12 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co ParameterEditorController - + Unable to create file: %1 Não foi possível criar arquivo: %1 - + Unable to open file: %1 Não foi possível abrir o arquivo: %1 @@ -12877,72 +12614,67 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Mín: - + Max: Máx: - + Default: Padrão: - - Parameter name: - Nome do parâmetro: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Aviso: Modificar os valores enquanto o veículo está voando pode levar a instabilidade ou perda do veículo. - + Make sure you know what you are doing and double-check your values before Save! Tenha certeza do que está fazendo e verifique duas vezes os valores antes de Salvar! - + Force save (dangerous!) Forçar salvamento (perigoso!) - + Advanced settings Configurações Avançadas - + Manual Entry Entrada Manual - + Set RC to Param Set RC to Param @@ -12950,38 +12682,38 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Falha na escrita do parâmetro: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Leitura do parâmetro falhou: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parâmetros não foram carregados pois ainda não estão no veículo: %1 - + Parameters not loaded due to type mismatch: %1 Parâmetros não carregados devido a incompatibilidade de tipos: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 não conseguiu recuperar o conjunto completo dos parâmetros do veículo %2. Dessa forma %1 não consegue mostrar sua interface de usuário completa. Se você está utilizando um firmware modificado, pode ser necessário solucionar alguns erros de inicialização para solucionar o problema. Se você está usando o firmware padrão, talvez seja necessário atualizar para uma versão mais nova para resolver o problema. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Veículo %1 não respondeu ao pedido por parâmetros. Devido a isso %2 não pode mostrar a interface do usuário completa. @@ -13127,178 +12859,178 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Ocorreu um erro interno durante a comunicação do Item da Missão: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Falha ao requisitar lista da missão, número máximo de tentativas excedido. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Leitura da missão falhou, número máximo de tentativas excedido. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Falha na escrita da missão, veículo falhou ao enviar o ack final. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 O veículo não solicitou todos os items da estação terrestre: %1 - + Mission remove all, maximum retries exceeded. Remover tudo da missão, número máximo de tentativas excedida. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 O veículo não respondeu a comunicação do item da missão: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Erro Interno: Chamada para Veículo _requestNextMissionItem sem mais índices para ler - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. O veículo requisitou um item fora da faixa, contagem:pedido %1:%2. Falha ao enviar ao Veículo. - + Vehicle remove all failed. Error: %1 Falha ao remover tudo do veículo. Erro: %1 - + Item #%1 Command: %2 Ítem #%1 Comando: %2 - + Frame: %1 Quadro: %1 - - - - - - - + + + + + + + Value: %1 Valor: %1 - + Mission accepted. Missão aceita. - + Unspecified error. Erro não especificado. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Comando não suportado. - + Mission item exceeds storage space. Item da missão excede o espaço de armazenamento. - + One of the parameters has an invalid value. Um dos parâmetros tem um valor inválido. - + Param 1 invalid value. Parâmetro 1 valor inválido. - + Param 2 invalid value. Parâmetro 2 valor inválido - + Param 3 invalid value. Parâmetro 3 valor inválido - + Param 4 invalid value. Parâmetro 4 valor inválido. - + Param 5 invalid value. Parâmetro 5 valor inválido. - + Param 6 invalid value. Parâmetro 6 valor inválido. - + Param 7 invalid value. Parâmetro 7 valor inválido. - + Received mission item out of sequence. Item de missão recebido fora da sequência. - + Not accepting any mission commands. Não aceitando nenhum comando da missão. - + Unknown error: %1. Erro desconhecido: %1 - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Veículo retornou um erro: %1. %2Veículo não aceitou o item do tipo guiado. @@ -13350,27 +13082,27 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co PlanToolBarIndicators - + Selected Waypoint Ponto Selecionado - + Alt diff: Dif de Alt: - + Azimuth: Azimute: - + Distance: Distância: - + Gradient: Gradiente: @@ -13386,47 +13118,47 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co N/A - + Dist prev WP: Dist prev WP: - + Heading: Direção: - + Total Mission Total Rota - + Max telem dist: Dist máx controle-drone - + Time: Tempo: - + Battery Bateria - + Batteries required: Baterias necessárias: - + Upload Required Envio Necessário - + Upload Enviar @@ -13439,313 +13171,303 @@ Note que isso também irá redefinir tudo, incluindo nós da UAVCAN, todas as co O veículo está armado. Deseja enviar a rota para o veículo mesmo assim? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? Você alterou a altitude padrão para itens da missão. Gostaria de aplicar essa altitude para todos os itens da missão atual? - + You need at least one item to create a KML. Necessita-se pelo menos um item para criar um KML. - + Plan is waiting on terrain data from server for correct altitude values. Rotas está aguardando dados do servidor sobre o terreno para corrigir os valores de altitude. - + Plan Upload Enviar Rota - + Select Plan File Selecionar Arquivo de Rota - + Save Plan Salvar Rota - + Save KML Salvar KML - + File Arquivo - + Waypoint Ponto - + ROI ROI - + Pattern Padrão - + Center Centralizar - + Plan Rota - + Apply new altitude Aplicar nova altitude - + Plan View - Vehicle Disconnected Tela da Rota - Veículo Desconectado - + Plan View - Vehicle Changed Tela da Rota - Veículo Mudou - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? O veículo associado a rota na Tela de Rota não está mais disponível. O que gostaria de fazer com essa rota? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? A rota que está na Tela de Rota não está no veículo atual. O que gostaria de fazer com essa rota? - + Discard Unsaved Changes Descartar Mudanças Não Salvas - + Discard Unsaved Changes, Load New Plan From Vehicle Descartar Mudanças Não Salvas, Carregar Nova Rota do Veículo - + Load New Plan From Vehicle Carregar Nova Rota do Veículo - + Keep Current Plan Manter Rota Atual - + Keep Current Plan, Don't Update From Vehicle Manter rota atual, não atualize com a rota do veículo - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. Essa rota foi criada para um firmware ou tipo de veículo diferente do que o firmware/tipo de veículo para qual está enviando. Isso pode levar a erros ou comportamento incorreto. É recomendado recriar a Rota para o firmware/tipo de veículo correto. - + Send To Vehicle Enviar para o Veículo - + Current mission must be paused prior to uploading a new Plan Rota atual deve ser pausada antes de enviar uma nova rota - + Fly Voar - + Takeoff Decolar - + Rally Point Rally Point - + Cancel ROI Cancelar ROI - + Return Retornar - + Land Pousar - - + + Mission Rota - + Fence Cerca - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? Você tem alterações não salvas/não enviadas. Carregar do veículo irá apagar essas alterações. Tem certeza que deseja carregar do veículo? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? Você tem alterações não salvas/não enviadas. Carregar de um arquivo irá apagar essas alterações. Tem certeza que deseja carregar o arquivo? - - + + Clear Limpar - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Tem certeza que deseja remover todos os itens da rota e limpar a rota que está no veículo? - + Create complex pattern: Criar padrão complexo: - + You have unsaved changes. Você tem alterações não salvas. - + Open... Abrir... - - - + + + Save Salvar - - + + Unable to %1 Incapaz de %1 - + Plan has incomplete items. Complete all items and %1 again. Rota tem itens incompletos. Complete todos os itens e %1 novamente. - + Are you sure you want to remove current plan and create a new plan? Tem certeza que deseja remover a rota atual e criar uma nova rota? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. Você tem alterações não salvas. Você deve enviar ao seu veículo ou salvar em um arquivo. - - + + Create Plan Criar Rota - + Storage Armazenamento - + Save As... Salvar Como... - + Save Mission Waypoints As KML... Salvar pontos da rota como KML... - + KML KML - - - + + + Upload Enviar - + Vehicle Veículo - + Download Baixar @@ -13791,34 +13513,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Clique para adicionar ponto %1 - - - - - Right Click to end polygon - - Clique com o botão direito para terminar polígono - - - - Click to add point - Clique para adicionar pontos - - - - Click to add point - Right Click to end polygon - Clique para adicionar ponto - Clique com o botão direito para terminar o polígono - - - - Adjust polygon by dragging corners - Ajuste o polígono arrastando os cantos - - PowerComponent @@ -14374,44 +14068,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> O usuário atual não tem as permissões corretas para acessar dispositivos seriais. Você deve remover modemmanager porque também interfere.<br/><br/>Se você está usando Ubuntu, execute os seguintes comandos para consertar esses problemas:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. O formato para as configurações salvas %1 foi modificado. Suas configurações foram redefinidas para as padrões. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Não foi possível salvar registros de telemetria. Erro ao copiar telemetria para '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Os parâmetros estão faltando no firmware. Você pode estar rodando uma versão de firmware que não é completamente suportada ou seu firmware tem um bug. Parâmetros faltando: %1 - + There is a newer version of %1 available. You can download it from %2. Existe uma nova versão de %1 disponível. Você pode baixar de %2. - + New Version Available Nova versão disponível + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Não foi possível salvar o log de telemetria. Diretório onde o aplicativo deve salvar não está definido. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Não foi possível salvar os registros de telemetria. O diretório "%1" para salvar Telemetria não existe. + + Database Not Initialized + Database Not Initialized @@ -14425,32 +14112,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibração - + Log Download Baixar Registro - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? ATENÇÃO: Você está prestes a entrar em Modo Avançado. Se usado incorretamente, isso pode levar o veículo a funcionar incorretamente levando a perda da garantia. Você só deve fazer isso se instruído pelo suporte ao consumidor. Você tem certeza que deseja habilitar o Modo Avançado? @@ -14508,178 +14195,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Não foi possível encontrar local para transferência gravável. Tentou no diretório downloads e temp. - + Could not save downloaded file to %1. Error: %2 Não foi possível baixar arquivo baixado para %1. Erro: %2 - + Download cancelled Transferência cancelada - + Error: File Not Found Erro: Arquivo não encontrado - + Error during download. Error: %1 Erro durante a transferência. Erro: %1 - - QGCLogEntry - - - Pending - Pendente - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14687,24 +14366,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14833,83 +14504,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14917,60 +14588,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bits - + 64 bit 64 bits - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relativo a posição inicial - + Terrain Frame Terrain Frame @@ -14978,46 +14705,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Desconhecido - - - - Pixhawk - Pixhawk - - - - SiK Radio - Rádio SiK - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - GPS RTK - - - - + + Guided mode not supported by Vehicle. Modo Guiado não é suportado pelo Veículo. - - - Follow Me - Siga-me - The following required keys are missing: %1 @@ -15101,25 +14793,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15207,8 +14888,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15324,18 +15016,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Modo 1 - + Mode 2 Modo 2 @@ -15441,17 +15133,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Próximo - + Calibrate Calibrar - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15463,12 +15155,12 @@ Clique no botão Próximo para enviar a calibração para a placa. Clique em Can RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15511,192 +15203,213 @@ Clique no botão Próximo para enviar a calibração para a placa. Clique em Can RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: + + Arm Status Error + Arm Status Error - - Region - Region + + Basic ID + Basic ID - - GPS GCS - GPS GCS + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + + Broadcast + Broadcast - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - Altitude Fixed - Altitude Fixed + + Broadcast Message + Broadcast Message - - Latitude - Latitude - - - - Longitude - Longitude - - - - - Altitude - Altitude - - - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16558,7 +16271,7 @@ ROTATION_NONE indica que o componente aponta na direção do voo. SerialConfiguration - + Serial Link Settings Configurações da Conexão Serial @@ -16566,24 +16279,14 @@ ROTATION_NONE indica que o componente aponta na direção do voo. SerialLink - - Could not send data - link %1 is disconnected! - Não foi possível enviar dados - Conexão %1 está desconectada! - - - - Error connecting: Could not create port. %1 - Erro na conexão: Não foi possível criar porta. %1 - - - - Could not read data - link %1 is disconnected! - Não foi possível ler dados - conexão %1 está desconectada! + + Serial Link Error + Serial Link Error - - Link Error - Erro Conexão + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16649,6 +16352,44 @@ ROTATION_NONE indica que o componente aponta na direção do voo. Bits de Parada + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16768,57 +16509,57 @@ ROTATION_NONE indica que o componente aponta na direção do voo. texto faltando no painel de mensagem - + %1 setup must be completed prior to %2 setup. Configuração de %1 deve ser concluída antes da configuração do %2. - + %1 does not currently support setup of your vehicle type. %1 não suporta atualmente a configuração do tipo do seu veículo. - + Vehicle settings and info will display after connecting your vehicle. As configurações e informações do veículo serão exibidas após conectar seu veículo. - + You are currently connected to a vehicle but it did not return the full parameter list. Você está atualmente conectado a um veículo, mas ele não devolveu a lista completa de parâmetros. - + As a result, the full set of vehicle setup options are not available. Como resultado, o conjunto completo de opções de configuração do veículo não está disponível. - + Summary Resumo - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parâmetros @@ -16942,42 +16683,42 @@ ROTATION_NONE indica que o componente aponta na direção do voo. SimpleMissionItem - + Unknown: %1 Desconhecido: %1 - + L L - + Takeoff Decolar - + Land Pousar - + Transition Direction Direção da Transição - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16993,7 +16734,7 @@ ROTATION_NONE indica que o componente aponta na direção do voo. StandardModes - + Unknown %2 Unknown %2 @@ -17001,47 +16742,47 @@ ROTATION_NONE indica que o componente aponta na direção do voo. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17400,7 +17141,7 @@ Pairar e capturar imagem TCPConfiguration - + TCP Link Settings Configurações Conexão TCP @@ -17408,20 +17149,42 @@ Pairar e capturar imagem TCPLink - - - Link Error - Erro Conexão + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Erro na conexão %1. Falha ao conectar. + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Erro na conexão %1. Erro no socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17456,48 +17219,48 @@ Pairar e capturar imagem TelemetryRSSIIndicator - + Telemetry RSSI Status Estado RSSI Telem - + Local RSSI: RSSI Local: - - + + dBm dBm - + Remote RSSI: RSSI Remoto: - + RX Errors: Erros RX: - + Errors Fixed: Erros corrigidos: - + TX Buffer: Buffer TX: - + Local Noise: Ruído Local: - + Remote Noise: Ruído Remoto: @@ -17689,7 +17452,7 @@ Pairar e capturar imagem ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17858,7 +17621,7 @@ Pairar e capturar imagem UDPConfiguration - + UDP Link Settings Configurações Conexão UDP @@ -17866,123 +17629,160 @@ Pairar e capturar imagem UDPLink - - + UDP Link Error Erro Conexão UDP - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18102,22 +17902,22 @@ Pairar e capturar imagem Temperatura - + Choose the measurement units you want to use. You can also change it later in General Settings. Escolha as unidades de medida que você deseja usar. Você também pode alterá-lo mais tarde em Configurações Gerais. - + System of units Sistema das unidades - + Metric System Sistema Métrico - + Imperial System Sistema Imperial @@ -18323,7 +18123,7 @@ Pairar e capturar imagem VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18351,78 +18151,78 @@ Pairar e capturar imagem Use loiter to altitude - - + + Altitude Altitude - + Radius Raio - + Loiter clockwise Loiter clockwise - + Landing point Ponto de Pouso - + Heading Direção - + Landing Dist Dist de Pouso - + Altitudes relative to launch Altitudes relativas a posição inicial. - + Camera Câmera - + * Actual flight path will vary. * O caminho real de voo irá variar. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Garanta que a distância para pouso é a suficiente para completar a transição. - + Click in map to set landing point. Clique no mapa para definir o ponto de pouso. - + - or - - ou - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Arraste o ponto de loiter para ajustar a direção de pouso devido ao vento e obstáculos assim como a distância até o ponto de pouso. - + Done Concluído @@ -18430,183 +18230,165 @@ Pairar e capturar imagem VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Aproximar - + Land Pousar - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Falha na transferência da missão. Erro: %1 - + GeoFence transfer failed. Error: %1 Falha na transferência da GeoCerca. Erro: %1 - + Rally Point transfer failed. Error: %1 Transferência de Rally Point falhou. Erro: %1 - + battery %1 level low nível da bateria %1 baixo - + battery %1 level is critical nível da bateria %1 é crítico - + battery %1 level emergency nível de emergência bateria %1 - + battery %1 failed bateria %1 falhou - + battery %1 unhealthy bateria %1 insalubre - + warning aviso - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Veículo %1 - + Vehicle reboot failed. A reinicialização do veículo falhou. - + %1 %2 flight mode modo de voo %1 %2 - + armed armado - + disarmed desarmado - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Não foi possível enviar o comando: %1. - + Internal error - MAV_COMP_ID_ALL not supported Erro interno - MAV_COMP_ID_ALL não suportado - + Waiting on previous response to same command. Aguardando resposta anterior ao mesmo comando. - + Vehicle did not respond to command: %1 O veículo não respondeu ao comando: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected comando %1 rejeitado temporariamente - + %1 command denied comando %1 negado - + %1 command not supported comando %1 não suportado - + %1 command failed comando %1 falhou @@ -18614,42 +18396,42 @@ Pairar e capturar imagem Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Genérico - + Unknown Desconhecido @@ -18657,49 +18439,49 @@ Pairar e capturar imagem VehicleLinkManager - + %1Communication regained on %2 link %1Comunicação recuperada com ligação %2 - - + + primary primário - - + + secondary secundário - + %1Communication regained %1Comunicação recuperada - + %1Switching communication to new primary link %1Mudando comunicação para nova ligação primária - + %1Communication lost on %2 link. %1Comunicação perdida na ligação %2. - + %1Switching communication to secondary link. %1Mudando comunicação para ligação secundária. - + %1Communication lost %1Comunicação perdida - + Comm Lost Comunicação Perdida @@ -18807,22 +18589,17 @@ Pairar e capturar imagem VideoManager - - Video receiver is not ready. - O receptor de vídeo não está pronto. - - - + Invalid video format defined. Formato de vídeo inválido definido. - + Unabled to record video. Video save path must be specified in Settings. Não foi possível gravar o vídeo. Configure o caminho para salvar o vídeo nas Configurações. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18830,142 +18607,142 @@ Pairar e capturar imagem VideoSettings - + No Video Available Nenhum vídeo disponível - + Video Stream Disabled Transmissão de Vídeo Desativada - + RTSP Video Stream Transmissão de vídeo RTSP - + UDP h.264 Video Stream Transmissão de Vídeo UDP h.264 - + UDP h.265 Video Stream Transmissão de Vídeo UDP h.265 - + TCP-MPEG2 Video Stream Transmissão de vídeo TCP-MPEG2 - + MPEG-TS (h.264) Video Stream Transmissão de Vídeo MPEG-TS (h.264) - + 3DR Solo (requires restart) 3DR Solo (reinicialização necessária) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_ru_RU.ts b/translations/qgc_source_ru_RU.ts index 26db22478ba..957e72cc1d1 100644 --- a/translations/qgc_source_ru_RU.ts +++ b/translations/qgc_source_ru_RU.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_sv_SE.ts b/translations/qgc_source_sv_SE.ts index 70cfcd75fc5..4c66176ef01 100644 --- a/translations/qgc_source_sv_SE.ts +++ b/translations/qgc_source_sv_SE.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_tr_TR.ts b/translations/qgc_source_tr_TR.ts index 07bd55fd55a..1aa5c236635 100644 --- a/translations/qgc_source_tr_TR.ts +++ b/translations/qgc_source_tr_TR.ts @@ -1,40 +1,32 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent Airframe is currently not set. - Airframe is currently not set. + Airframe is currently not set. Currently set to frame class '%1' - Currently set to frame class '%1' + Currently set to frame class '%1' and frame type '%2' - and frame type '%2' + and frame type '%2' . period for end of sentence - . + . @@ -46,23 +38,23 @@ Frame Type - Frame Type + Frame Type Invalid setting for FRAME_TYPE. Click to Reset. - Invalid setting for FRAME_TYPE. Click to Reset. + Invalid setting for FRAME_TYPE. Click to Reset. Frame - Frame + Frame Frame Setup is used to select the airframe which matches your vehicle. - Frame Setup is used to select the airframe which matches your vehicle. + Frame Setup is used to select the airframe which matches your vehicle. @@ -70,12 +62,12 @@ Param file github json download failed: %1 - Param file github json download failed: %1 + Param file github json download failed: %1 Param file download failed: %1 - Param file download failed: %1 + Param file download failed: %1 @@ -84,62 +76,67 @@ Frame Class - Frame Class + Frame Class Frame Type - Frame Type + Frame Type Firmware Version - Firmware Version + Firmware Version Unknown - Unknown + Unknown APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 - WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -150,49 +147,49 @@ Disabled - Disabled + Disabled Channel - Channel + Channel Gimbal - Gimbal + Gimbal Stabilize - Stabilize + Stabilize Servo reverse - Servo reverse + Servo reverse Output channel: - Output channel: + Output channel: Input channel: - Input channel: + Input channel: Gimbal angle limits: - Gimbal angle limits: + Gimbal angle limits: @@ -200,7 +197,7 @@ min - min + min @@ -208,65 +205,65 @@ max - max + max Servo PWM limits: - Servo PWM limits: + Servo PWM limits: Gimbal Settings - Gimbal Settings + Gimbal Settings Type: - Type: + Type: Gimbal Type changes takes affect next reboot of autopilot - Gimbal Type changes takes affect next reboot of autopilot + Gimbal Type changes takes affect next reboot of autopilot Default Mode: - Default Mode: + Default Mode: Tilt - Tilt + Tilt Roll - Roll + Roll Pan - Pan + Pan Camera - Camera + Camera Camera setup is used to adjust camera and gimbal settings. - Camera setup is used to adjust camera and gimbal settings. + Camera setup is used to adjust camera and gimbal settings. @@ -275,25 +272,25 @@ Gimbal type - Gimbal type + Gimbal type Tilt input channel - Tilt input channel + Tilt input channel Pan input channel - Pan input channel + Pan input channel Roll input channel - Roll input channel + Roll input channel @@ -302,67 +299,67 @@ Disabled - Disabled + Disabled Channel 5 - Channel 5 + Channel 5 Channel 6 - Channel 6 + Channel 6 Channel 7 - Channel 7 + Channel 7 Channel 8 - Channel 8 + Channel 8 Channel 9 - Channel 9 + Channel 9 Channel 10 - Channel 10 + Channel 10 Channel 11 - Channel 11 + Channel 11 Channel 12 - Channel 12 + Channel 12 Channel 13 - Channel 13 + Channel 13 Channel 14 - Channel 14 + Channel 14 @@ -392,31 +389,31 @@ Gimbal - Gimbal + Gimbal Output channel: - Output channel: + Output channel: Servo reverse - Servo reverse + Servo reverse Stabilize - Stabilize + Stabilize Servo PWM limits: - Servo PWM limits: + Servo PWM limits: @@ -424,7 +421,7 @@ min - min + min @@ -432,119 +429,134 @@ max - max + max Gimbal angle limits: - Gimbal angle limits: + Gimbal angle limits: Gimbal Settings - Gimbal Settings + Gimbal Settings Type: - Type: + Type: Gimbal Type changes takes affect next reboot of autopilot - Gimbal Type changes takes affect next reboot of autopilot + Gimbal Type changes takes affect next reboot of autopilot Default Mode: - Default Mode: + Default Mode: Tilt - Tilt + Tilt Roll - Roll + Roll Pan - Pan + Pan APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 - Error during Solo video link setup: %1 + Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. - Unable to change altitude, vehicle altitude not known. + Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. - Unable to pause vehicle. + Unable to pause vehicle. + + + + Vehicle does not support guided rotate + Vehicle does not support guided rotate - + Vehicle does not support guided takeoff - Vehicle does not support guided takeoff + Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. - Unable to takeoff, vehicle position not known. + Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. - Unable to takeoff: Vehicle failed to change to Guided mode. + Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. - Unable to takeoff: Vehicle failed to arm. + Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. - Unable to start mission: Vehicle failed to change to Auto mode. + Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. - Unable to start mission: Vehicle failed to change to Guided mode. + Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. - Unable to start mission: Vehicle failed to arm. - - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. + Unable to start mission: Vehicle failed to arm. @@ -576,13 +588,13 @@ Flight Mode Settings - Flight Mode Settings + Flight Mode Settings (Channel 5) - (Channel 5) + (Channel 5) @@ -672,7 +684,7 @@ Switch Options - Switch Options + Switch Options @@ -688,7 +700,7 @@ Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes. - Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes. + Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes. @@ -701,17 +713,17 @@ Simple - Simple + Simple Super-Simple - Super-Simple + Super-Simple Custom - Custom + Custom @@ -720,37 +732,37 @@ Flight Mode 1 - Flight Mode 1 + Flight Mode 1 Flight Mode 2 - Flight Mode 2 + Flight Mode 2 Flight Mode 3 - Flight Mode 3 + Flight Mode 3 Flight Mode 4 - Flight Mode 4 + Flight Mode 4 Flight Mode 5 - Flight Mode 5 + Flight Mode 5 Flight Mode 6 - Flight Mode 6 + Flight Mode 6 @@ -759,73 +771,73 @@ Enable Follow Me - Enable Follow Me + Enable Follow Me Waiting for Vehicle to update - Waiting for Vehicle to update + Waiting for Vehicle to update The vehicle parameters required for follow me are currently set in a way which is not supported. Using follow with this setup may lead to unpredictable/hazardous results. - The vehicle parameters required for follow me are currently set in a way which is not supported. Using follow with this setup may lead to unpredictable/hazardous results. + The vehicle parameters required for follow me are currently set in a way which is not supported. Using follow with this setup may lead to unpredictable/hazardous results. Reset To Supported Settings - Reset To Supported Settings + Reset To Supported Settings Vehicle Position - Vehicle Position + Vehicle Position Maintain Current Offsets - Maintain Current Offsets + Maintain Current Offsets Specify Offsets - Specify Offsets + Specify Offsets Point Vehicle - Point Vehicle + Point Vehicle Maintain current vehicle orientation - Maintain current vehicle orientation + Maintain current vehicle orientation Point at ground station location - Point at ground station location + Point at ground station location Same direction as ground station movement - Same direction as ground station movement + Same direction as ground station movement Vehicle Offsets - Vehicle Offsets + Vehicle Offsets @@ -849,50 +861,70 @@ Click in the graphic to change angle - Click in the graphic to change angle + Click in the graphic to change angle L - L + L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -901,121 +933,121 @@ Servo Setup - Servo Setup + Servo Setup Servo - Servo + Servo Function - Function + Function Min - Min + Min Max - Max + Max Trim - Trim + Trim Reversed - Reversed + Reversed 1 - 1 + 1 2 - 2 + 2 3 - 3 + 3 4 - 4 + 4 5 - 5 + 5 6 - 6 + 6 7 - 7 + 7 8 - 8 + 8 Swashplate Setup - Swashplate Setup + Swashplate Setup Throttle Settings - Throttle Settings + Throttle Settings Governor Settings - Governor Settings + Governor Settings Miscellaneous Settings - Miscellaneous Settings + Miscellaneous Settings * Stabilize Collective Curve * - * Stabilize Collective Curve * + * Stabilize Collective Curve * @@ -1026,17 +1058,17 @@ * Tail & Gyros * - * Tail & Gyros * + * Tail & Gyros * Heli - Heli + Heli Heli Setup is used to setup parameters which are specific to a helicopter. - Heli Setup is used to setup parameters which are specific to a helicopter. + Heli Setup is used to setup parameters which are specific to a helicopter. @@ -1045,47 +1077,47 @@ Disabled - Disabled + Disabled Channel - Channel + Channel Light Output Channels - Light Output Channels + Light Output Channels Lights 1: - Lights 1: + Lights 1: Lights 2: - Lights 2: + Lights 2: Brightness Steps: - Brightness Steps: + Brightness Steps: Lights - Lights + Lights Lights setup is used to adjust light output channels. - Lights setup is used to adjust light output channels. + Lights setup is used to adjust light output channels. @@ -1094,87 +1126,87 @@ Disabled - Disabled + Disabled Channel 5 - Channel 5 + Channel 5 Channel 6 - Channel 6 + Channel 6 Channel 7 - Channel 7 + Channel 7 Channel 8 - Channel 8 + Channel 8 Channel 9 - Channel 9 + Channel 9 Channel 10 - Channel 10 + Channel 10 Channel 11 - Channel 11 + Channel 11 Channel 12 - Channel 12 + Channel 12 Channel 13 - Channel 13 + Channel 13 Channel 14 - Channel 14 + Channel 14 Lights Output 1 - Lights Output 1 + Lights Output 1 Lights Output 2 - Lights Output 2 + Lights Output 2 APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1197,37 +1229,37 @@ Motors - Motors + Motors Warning: Unable to determine motor count - Warning: Unable to determine motor count + Warning: Unable to determine motor count All - All + All Moving the sliders will causes the motors to spin. Make sure you remove all props. - Moving the sliders will causes the motors to spin. Make sure you remove all props. + Moving the sliders will causes the motors to spin. Make sure you remove all props. Careful: Motor sliders are enabled - Careful: Motor sliders are enabled + Careful: Motor sliders are enabled Propellers are removed - Enable motor sliders - Propellers are removed - Enable motor sliders + Propellers are removed - Enable motor sliders @@ -1236,7 +1268,7 @@ Not supported - Not supported + Not supported @@ -1245,7 +1277,7 @@ Requires vehicle reboot - Requires vehicle reboot + Requires vehicle reboot @@ -1253,13 +1285,13 @@ Battery 1 - Battery 1 + Battery 1 Battery1 monitor: - Battery1 monitor: + Battery1 monitor: @@ -1267,7 +1299,7 @@ Reboot vehicle - Reboot vehicle + Reboot vehicle @@ -1275,151 +1307,151 @@ Battery 2 - Battery 2 + Battery 2 Battery2 monitor: - Battery2 monitor: + Battery2 monitor: ESC Calibration - ESC Calibration + ESC Calibration WARNING: Remove props prior to calibration! - WARNING: Remove props prior to calibration! + WARNING: Remove props prior to calibration! Calibrate - Calibrate + Calibrate Now perform these steps: - Now perform these steps: + Now perform these steps: Click Calibrate to start, then: - Click Calibrate to start, then: + Click Calibrate to start, then: - Disconnect USB and battery so flight controller powers down - - Disconnect USB and battery so flight controller powers down + - Disconnect USB and battery so flight controller powers down - Connect the battery - - Connect the battery + - Connect the battery - The arming tone will be played (if the vehicle has a buzzer attached) - - The arming tone will be played (if the vehicle has a buzzer attached) + - The arming tone will be played (if the vehicle has a buzzer attached) - If using a flight controller with a safety button press it until it displays solid red - - If using a flight controller with a safety button press it until it displays solid red + - If using a flight controller with a safety button press it until it displays solid red - You will hear a musical tone then two beeps - - You will hear a musical tone then two beeps + - You will hear a musical tone then two beeps - A few seconds later you should hear a number of beeps (one for each battery cell you're using) - - A few seconds later you should hear a number of beeps (one for each battery cell you're using) + - A few seconds later you should hear a number of beeps (one for each battery cell you're using) - And finally a single long beep indicating the end points have been set and the ESC is calibrated - - And finally a single long beep indicating the end points have been set and the ESC is calibrated + - And finally a single long beep indicating the end points have been set and the ESC is calibrated - Disconnect the battery and power up again normally - - Disconnect the battery and power up again normally + - Disconnect the battery and power up again normally Power Module 90A - Power Module 90A + Power Module 90A Power Module HV - Power Module HV + Power Module HV 3DR Iris - 3DR Iris + 3DR Iris Other - Other + Other Battery monitor: - Battery monitor: + Battery monitor: Battery capacity: - Battery capacity: + Battery capacity: Minimum arming voltage: - Minimum arming voltage: + Minimum arming voltage: Power sensor: - Power sensor: + Power sensor: Current pin: - Current pin: + Current pin: Voltage pin: - Voltage pin: + Voltage pin: @@ -1427,7 +1459,7 @@ Voltage multiplier: - Voltage multiplier: + Voltage multiplier: @@ -1435,19 +1467,19 @@ Calculate - Calculate + Calculate Calculate Voltage Multiplier - Calculate Voltage Multiplier + Calculate Voltage Multiplier If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. Click the Calculate button for help with calculating a new value. - If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. Click the Calculate button for help with calculating a new value. + If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. Click the Calculate button for help with calculating a new value. @@ -1455,19 +1487,19 @@ Amps per volt: - Amps per volt: + Amps per volt: Calculate Amps per Volt - Calculate Amps per Volt + Calculate Amps per Volt If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. Click the Calculate button for help with calculating a new value. - If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. Click the Calculate button for help with calculating a new value. + If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. Click the Calculate button for help with calculating a new value. @@ -1485,31 +1517,31 @@ Amps Offset: - Amps Offset: + Amps Offset: If the vehicle reports a high current read when there is little or no current going through it, adjust the Amps Offset. It should be equal to the voltage reported by the sensor when the current is zero. - If the vehicle reports a high current read when there is little or no current going through it, adjust the Amps Offset. It should be equal to the voltage reported by the sensor when the current is zero. + If the vehicle reports a high current read when there is little or no current going through it, adjust the Amps Offset. It should be equal to the voltage reported by the sensor when the current is zero. Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new adjusted voltage multiplier. - Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new adjusted voltage multiplier. + Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new adjusted voltage multiplier. Measured voltage: - Measured voltage: + Measured voltage: Vehicle voltage: - Vehicle voltage: + Vehicle voltage: @@ -1517,35 +1549,35 @@ Calculate And Set - Calculate And Set + Calculate And Set Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value. - Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value. + Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value. Measured current: - Measured current: + Measured current: Vehicle current: - Vehicle current: + Vehicle current: Power - Power + Power The Power Component is used to setup battery parameters. - The Power Component is used to setup battery parameters. + The Power Component is used to setup battery parameters. @@ -1554,25 +1586,25 @@ Batt1 monitor - Batt1 monitor + Batt1 monitor Batt1 capacity - Batt1 capacity + Batt1 capacity Batt2 monitor - Batt2 monitor + Batt2 monitor Batt2 capacity - Batt2 capacity + Batt2 capacity @@ -1580,12 +1612,12 @@ Radio - Radio + Radio The Radio Component is used to setup which channels on your RC Transmitter you will use for each vehicle control such as Roll, Pitch, Yaw and Throttle. It also allows you to assign switches and dials to the various flight modes. Prior to flight you must also calibrate the extents for all of your channels. - The Radio Component is used to setup which channels on your RC Transmitter you will use for each vehicle control such as Roll, Pitch, Yaw and Throttle. It also allows you to assign switches and dials to the various flight modes. Prior to flight you must also calibrate the extents for all of your channels. + The Radio Component is used to setup which channels on your RC Transmitter you will use for each vehicle control such as Roll, Pitch, Yaw and Throttle. It also allows you to assign switches and dials to the various flight modes. Prior to flight you must also calibrate the extents for all of your channels. @@ -1594,7 +1626,7 @@ Roll - Roll + Roll @@ -1606,7 +1638,7 @@ Setup required - Setup required + Setup required @@ -1618,25 +1650,25 @@ Channel %1 - Channel %1 + Channel %1 Pitch - Pitch + Pitch Yaw - Yaw + Yaw Throttle - Throttle + Throttle @@ -1676,61 +1708,61 @@ Requires vehicle reboot - Requires vehicle reboot + Requires vehicle reboot Low action: - Low action: + Low action: Critical action: - Critical action: + Critical action: Low voltage threshold: - Low voltage threshold: + Low voltage threshold: Critical voltage threshold: - Critical voltage threshold: + Critical voltage threshold: Low mAh threshold: - Low mAh threshold: + Low mAh threshold: Critical mAh threshold: - Critical mAh threshold: + Critical mAh threshold: Reboot vehicle - Reboot vehicle + Reboot vehicle Battery1 Failsafe Triggers - Battery1 Failsafe Triggers + Battery1 Failsafe Triggers Battery2 Failsafe Triggers - Battery2 Failsafe Triggers + Battery2 Failsafe Triggers @@ -1738,19 +1770,19 @@ Failsafe Triggers - Failsafe Triggers + Failsafe Triggers Throttle PWM threshold: - Throttle PWM threshold: + Throttle PWM threshold: GCS failsafe - GCS failsafe + GCS failsafe @@ -1758,7 +1790,7 @@ Ground Station failsafe: - Ground Station failsafe: + Ground Station failsafe: @@ -1766,7 +1798,7 @@ Throttle failsafe: - Throttle failsafe: + Throttle failsafe: @@ -1774,49 +1806,49 @@ PWM threshold: - PWM threshold: + PWM threshold: Failsafe Crash Check: - Failsafe Crash Check: + Failsafe Crash Check: General Failsafe Triggers - General Failsafe Triggers + General Failsafe Triggers Disabled - Disabled + Disabled Always RTL - Always RTL + Always RTL Continue with Mission in Auto Mode - Continue with Mission in Auto Mode + Continue with Mission in Auto Mode Always Land - Always Land + Always Land GeoFence - GeoFence + GeoFence @@ -1856,72 +1888,72 @@ - + - + Return to Launch - Return to Launch + Return to Launch - + - + Return at current altitude - Return at current altitude + Return at current altitude - + - + Return at specified altitude: - Return at specified altitude: + Return at specified altitude: Loiter above Home for: - Loiter above Home for: + Loiter above Home for: Final land stage altitude: - Final land stage altitude: + Final land stage altitude: Final land stage descent speed: - Final land stage descent speed: + Final land stage descent speed: - - + + Arming Checks - Arming Checks + Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. - Warning: Turning off arming checks can lead to loss of Vehicle control. + Warning: Turning off arming checks can lead to loss of Vehicle control. Safety - Safety + Safety Safety Setup is used to setup failsafe actions, leak detection, and arming checks. - Safety Setup is used to setup failsafe actions, leak detection, and arming checks. + Safety Setup is used to setup failsafe actions, leak detection, and arming checks. Safety Setup is used to setup triggers for Return to Land as well as the settings for Return to Land itself. - Safety Setup is used to setup triggers for Return to Land as well as the settings for Return to Land itself. + Safety Setup is used to setup triggers for Return to Land as well as the settings for Return to Land itself. @@ -1929,194 +1961,194 @@ Battery1 Failsafe Triggers - Battery1 Failsafe Triggers + Battery1 Failsafe Triggers Battery low action: - Battery low action: + Battery low action: Battery critical action: - Battery critical action: + Battery critical action: Voltage threshold: - Voltage threshold: + Voltage threshold: MAH threshold: - MAH threshold: + MAH threshold: Battery2 Failsafe Triggers - Battery2 Failsafe Triggers + Battery2 Failsafe Triggers General Failsafe Triggers - General Failsafe Triggers + General Failsafe Triggers Ground Station failsafe: - Ground Station failsafe: + Ground Station failsafe: Throttle failsafe: - Throttle failsafe: + Throttle failsafe: Disabled - Disabled + Disabled Always RTL - Always RTL + Always RTL Continue with Mission in Auto Mode - Continue with Mission in Auto Mode + Continue with Mission in Auto Mode Always Land - Always Land + Always Land PWM threshold: - PWM threshold: + PWM threshold: GeoFence - GeoFence + GeoFence Circle GeoFence enabled - Circle GeoFence enabled + Circle GeoFence enabled Altitude GeoFence enabled - Altitude GeoFence enabled + Altitude GeoFence enabled Report only - Report only + Report only RTL or Land - RTL or Land + RTL or Land Max radius: - Max radius: + Max radius: Max altitude: - Max altitude: + Max altitude: Return to Launch - Return to Launch + Return to Launch Return at current altitude - Return at current altitude + Return at current altitude Return at specified altitude: - Return at specified altitude: + Return at specified altitude: Loiter above Home for: - Loiter above Home for: + Loiter above Home for: Land with descent speed: - Land with descent speed: + Land with descent speed: Final loiter altitude: - Final loiter altitude: + Final loiter altitude: Arming Checks - Arming Checks + Arming Checks Warning: Turning off arming checks can lead to loss of Vehicle control. - Warning: Turning off arming checks can lead to loss of Vehicle control. + Warning: Turning off arming checks can lead to loss of Vehicle control. APMSafetyComponentPlane - + Failsafe Triggers - Failsafe Triggers + Failsafe Triggers - + Throttle PWM threshold: - Throttle PWM threshold: + Throttle PWM threshold: - + Voltage threshold: - Voltage threshold: + Voltage threshold: - + MAH threshold: - MAH threshold: + MAH threshold: - + GCS failsafe - GCS failsafe + GCS failsafe - + Return to Launch - Return to Launch + Return to Launch - + Return at current altitude - Return at current altitude + Return at current altitude - + Return at specified altitude: - Return at specified altitude: + Return at specified altitude: @@ -2124,52 +2156,52 @@ Failsafe Triggers - Failsafe Triggers + Failsafe Triggers Ground Station failsafe: - Ground Station failsafe: + Ground Station failsafe: Throttle failsafe: - Throttle failsafe: + Throttle failsafe: PWM threshold: - PWM threshold: + PWM threshold: Failsafe Crash Check: - Failsafe Crash Check: + Failsafe Crash Check: Disabled - Disabled + Disabled Hold - Hold + Hold Hold and Disarm - Hold and Disarm + Hold and Disarm Arming Checks - Arming Checks + Arming Checks Warning: Turning off arming checks can lead to loss of Vehicle control. - Warning: Turning off arming checks can lead to loss of Vehicle control. + Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2178,37 +2210,37 @@ Failsafe Actions - Failsafe Actions + Failsafe Actions GCS Heartbeat: - GCS Heartbeat: + GCS Heartbeat: Leak: - Leak: + Leak: Detector Pin: - Detector Pin: + Detector Pin: Logic when Dry: - Logic when Dry: + Logic when Dry: Battery: - Battery: + Battery: @@ -2220,43 +2252,43 @@ Voltage: - Voltage: + Voltage: Remaining Capacity: - Remaining Capacity: + Remaining Capacity: EKF: - EKF: + EKF: Pilot Input: - Pilot Input: + Pilot Input: Timeout: - Timeout: + Timeout: Internal Temperature: - Internal Temperature: + Internal Temperature: Internal Pressure: - Internal Pressure: + Internal Pressure: @@ -2264,19 +2296,19 @@ Threshold: - Threshold: + Threshold: Arming Checks - Arming Checks + Arming Checks Warning: Turning off arming checks can lead to loss of Vehicle control. - Warning: Turning off arming checks can lead to loss of Vehicle control. + Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2285,19 +2317,19 @@ Arming Checks: - Arming Checks: + Arming Checks: Enabled - Enabled + Enabled Some disabled - Some disabled + Some disabled @@ -2307,43 +2339,43 @@ Throttle failsafe: - Throttle failsafe: + Throttle failsafe: Failsafe Action: - Failsafe Action: + Failsafe Action: Failsafe Crash Check: - Failsafe Crash Check: + Failsafe Crash Check: Batt1 low failsafe: - Batt1 low failsafe: + Batt1 low failsafe: Batt1 critical failsafe: - Batt1 critical failsafe: + Batt1 critical failsafe: Batt2 low failsafe: - Batt2 low failsafe: + Batt2 low failsafe: Batt2 critical failsafe: - Batt2 critical failsafe: + Batt2 critical failsafe: @@ -2351,49 +2383,49 @@ GeoFence: - GeoFence: + GeoFence: Disabled - Disabled + Disabled Altitude - Altitude + Altitude Circle - Circle + Circle Altitude,Circle - Altitude,Circle + Altitude,Circle Report only - Report only + Report only RTL or Land - RTL or Land + RTL or Land Unknown - Unknown + Unknown @@ -2401,7 +2433,7 @@ RTL min alt: - RTL min alt: + RTL min alt: @@ -2409,7 +2441,7 @@ current - current + current @@ -2417,128 +2449,128 @@ Arming Checks: - Arming Checks: + Arming Checks: Enabled - Enabled + Enabled Some disabled - Some disabled + Some disabled Throttle failsafe: - Throttle failsafe: + Throttle failsafe: Batt1 low failsafe: - Batt1 low failsafe: + Batt1 low failsafe: Batt1 critical failsafe: - Batt1 critical failsafe: + Batt1 critical failsafe: Batt2 low failsafe: - Batt2 low failsafe: + Batt2 low failsafe: Batt2 critical failsafe: - Batt2 critical failsafe: + Batt2 critical failsafe: GeoFence: - GeoFence: + GeoFence: Disabled - Disabled + Disabled Altitude - Altitude + Altitude Circle - Circle + Circle Altitude,Circle - Altitude,Circle + Altitude,Circle Report only - Report only + Report only RTL or Land - RTL or Land + RTL or Land Unknown - Unknown + Unknown RTL min alt: - RTL min alt: + RTL min alt: current - current + current APMSafetyComponentSummaryPlane - + Throttle failsafe: - Throttle failsafe: + Throttle failsafe: - - - + + + Disabled - Disabled + Disabled - + Voltage failsafe: - Voltage failsafe: + Voltage failsafe: - + mAh failsafe: - mAh failsafe: + mAh failsafe: - + RTL min alt: - RTL min alt: + RTL min alt: - + current - current + current @@ -2548,63 +2580,63 @@ Disabled - Disabled + Disabled Always RTL - Always RTL + Always RTL Always Hold - Always Hold + Always Hold Unknown - Unknown + Unknown Hold - Hold + Hold Hold and Disarm - Hold and Disarm + Hold and Disarm Arming Checks: - Arming Checks: + Arming Checks: Enabled - Enabled + Enabled Some disabled - Some disabled + Some disabled Throttle failsafe: - Throttle failsafe: + Throttle failsafe: Failsafe Action: - Failsafe Action: + Failsafe Action: Failsafe Crash Check: - Failsafe Crash Check: + Failsafe Crash Check: @@ -2613,61 +2645,61 @@ Arming Checks: - Arming Checks: + Arming Checks: Enabled - Enabled + Enabled Some disabled - Some disabled + Some disabled GCS failsafe: - GCS failsafe: + GCS failsafe: Leak failsafe: - Leak failsafe: + Leak failsafe: Battery failsafe: - Battery failsafe: + Battery failsafe: EKF failsafe: - EKF failsafe: + EKF failsafe: Pilot Input failsafe: - Pilot Input failsafe: + Pilot Input failsafe: Int. Temperature failsafe: - Int. Temperature failsafe: + Int. Temperature failsafe: Int. Pressure failsafe: - Int. Pressure failsafe: + Int. Pressure failsafe: @@ -2712,25 +2744,25 @@ To level the horizon you need to place the vehicle in its level flight position and press OK. - To level the horizon you need to place the vehicle in its level flight position and press OK. + To level the horizon you need to place the vehicle in its level flight position and press OK. Start the individual calibration steps by clicking one of the buttons to the left. - Start the individual calibration steps by clicking one of the buttons to the left. + Start the individual calibration steps by clicking one of the buttons to the left. The calibration for Compass %1 appears to be poor. - The calibration for Compass %1 appears to be poor. + The calibration for Compass %1 appears to be poor. Check the compass position within your vehicle and re-do the calibration. - Check the compass position within your vehicle and re-do the calibration. + Check the compass position within your vehicle and re-do the calibration. @@ -2738,13 +2770,13 @@ Calibrate Compass - Calibrate Compass + Calibrate Compass Calibrate Accelerometer - Calibrate Accelerometer + Calibrate Accelerometer @@ -2752,13 +2784,13 @@ Sensor Settings - Sensor Settings + Sensor Settings Calibration Cancel - Calibration Cancel + Calibration Cancel @@ -2766,31 +2798,31 @@ Calibration complete - Calibration complete + Calibration complete Waiting for Vehicle to response to Cancel. This may take a few seconds. - Waiting for Vehicle to response to Cancel. This may take a few seconds. + Waiting for Vehicle to response to Cancel. This may take a few seconds. (primary - (primary + (primary (secondary - (secondary + (secondary Use Compass - Use Compass + Use Compass @@ -2798,7 +2830,7 @@ Shown in the indicator bars is the quality of the calibration for each compass. - Shown in the indicator bars is the quality of the calibration for each compass. + Shown in the indicator bars is the quality of the calibration for each compass. @@ -2806,32 +2838,32 @@ Compass %1 - Compass %1 + Compass %1 , - , + , external - external + external internal - internal + internal - Green indicates a well functioning compass. - - Green indicates a well functioning compass. + - Green indicates a well functioning compass. @@ -2839,7 +2871,7 @@ - Yellow indicates a questionable compass or calibration. - - Yellow indicates a questionable compass or calibration. + - Yellow indicates a questionable compass or calibration. @@ -2848,7 +2880,7 @@ - Red indicates a compass which should not be used. - - Red indicates a compass which should not be used. + - Red indicates a compass which should not be used. @@ -2858,7 +2890,7 @@ YOU MUST REBOOT YOUR VEHICLE AFTER EACH CALIBRATION. - YOU MUST REBOOT YOUR VEHICLE AFTER EACH CALIBRATION. + YOU MUST REBOOT YOUR VEHICLE AFTER EACH CALIBRATION. @@ -2866,43 +2898,43 @@ Reboot Vehicle - Reboot Vehicle + Reboot Vehicle Priority 1 - Priority 1 + Priority 1 Priority 2 - Priority 2 + Priority 2 Priority 3 - Priority 3 + Priority 3 Not Set - Not Set + Not Set Orientation: - Orientation: + Orientation: Autopilot Rotation: - Autopilot Rotation: + Autopilot Rotation: @@ -2914,13 +2946,13 @@ Magnetic Declination - Magnetic Declination + Magnetic Declination Manual Magnetic Declination - Manual Magnetic Declination + Manual Magnetic Declination @@ -2992,79 +3024,79 @@ This is recommended for vehicles that have only an internal compass and on vehicles where there is significant interference on the compass from the motors, power wires, etc. - This is recommended for vehicles that have only an internal compass and on vehicles where there is significant interference on the compass from the motors, power wires, etc. + This is recommended for vehicles that have only an internal compass and on vehicles where there is significant interference on the compass from the motors, power wires, etc. CompassMot only works well if you have a battery current monitor because the magnetic interference is linear with current drawn. - CompassMot only works well if you have a battery current monitor because the magnetic interference is linear with current drawn. + CompassMot only works well if you have a battery current monitor because the magnetic interference is linear with current drawn. It is technically possible to set-up CompassMot using throttle but this is not recommended. - It is technically possible to set-up CompassMot using throttle but this is not recommended. + It is technically possible to set-up CompassMot using throttle but this is not recommended. Disconnect your props, flip them over and rotate them one position around the frame. - Disconnect your props, flip them over and rotate them one position around the frame. + Disconnect your props, flip them over and rotate them one position around the frame. In this configuration they should push the copter down into the ground when the throttle is raised. - In this configuration they should push the copter down into the ground when the throttle is raised. + In this configuration they should push the copter down into the ground when the throttle is raised. Secure the copter (perhaps with tape) so that it does not move. - Secure the copter (perhaps with tape) so that it does not move. + Secure the copter (perhaps with tape) so that it does not move. Turn on your transmitter and keep throttle at zero. - Turn on your transmitter and keep throttle at zero. + Turn on your transmitter and keep throttle at zero. Click Ok to start CompassMot calibration. - Click Ok to start CompassMot calibration. + Click Ok to start CompassMot calibration. To level the horizon you need to place the vehicle in its level flight position and press Ok. - To level the horizon you need to place the vehicle in its level flight position and press Ok. + To level the horizon you need to place the vehicle in its level flight position and press Ok. depth - depth + depth altitude - altitude + altitude Pressure calibration will set the %1 to zero at the current pressure reading. %2 - Pressure calibration will set the %1 to zero at the current pressure reading. %2 + Pressure calibration will set the %1 to zero at the current pressure reading. %2 To calibrate the airspeed sensor shield it from the wind. Do not touch the sensor or obstruct any holes during the calibration. - To calibrate the airspeed sensor shield it from the wind. Do not touch the sensor or obstruct any holes during the calibration. + To calibrate the airspeed sensor shield it from the wind. Do not touch the sensor or obstruct any holes during the calibration. @@ -3072,7 +3104,7 @@ For Gyroscope calibration you will need to place your vehicle on a surface and leave it still. Click Ok to start calibration. - For Gyroscope calibration you will need to place your vehicle on a surface and leave it still. + For Gyroscope calibration you will need to place your vehicle on a surface and leave it still. Click Ok to start calibration. @@ -3080,73 +3112,73 @@ Click Ok to start calibration. Accelerometer - Accelerometer + Accelerometer Compass - Compass + Compass Accelerometer must be calibrated prior to Compass. - Accelerometer must be calibrated prior to Compass. + Accelerometer must be calibrated prior to Compass. Level Horizon - Level Horizon + Level Horizon Accelerometer must be calibrated prior to Level Horizon. - Accelerometer must be calibrated prior to Level Horizon. + Accelerometer must be calibrated prior to Level Horizon. Gyro - Gyro + Gyro Calibrate Gyro - Calibrate Gyro + Calibrate Gyro Baro/Airspeed - Baro/Airspeed + Baro/Airspeed Pressure - Pressure + Pressure CompassMot - CompassMot + CompassMot Next - Next + Next Cancel - Cancel + Cancel @@ -3162,7 +3194,7 @@ Click Ok to start calibration. Rotate - Rotate + Rotate @@ -3178,17 +3210,17 @@ Click Ok to start calibration. Hold Still - Hold Still + Hold Still Sensors - Sensors + Sensors Sensors Setup is used to calibrate the sensors within your vehicle. - Sensors Setup is used to calibrate the sensors within your vehicle. + Sensors Setup is used to calibrate the sensors within your vehicle. @@ -3196,64 +3228,64 @@ Click Ok to start calibration. Calibration complete - Calibration complete + Calibration complete Calibration failed. Calibration log will be displayed. - Calibration failed. Calibration log will be displayed. + Calibration failed. Calibration log will be displayed. Rotate the vehicle randomly around all axes until the progress bar fills all the way to the right . - Rotate the vehicle randomly around all axes until the progress bar fills all the way to the right . + Rotate the vehicle randomly around all axes until the progress bar fills all the way to the right . Raise the throttle slowly to between 50% ~ 75% (the props will spin!) for 5 ~ 10 seconds. - Raise the throttle slowly to between 50% ~ 75% (the props will spin!) for 5 ~ 10 seconds. + Raise the throttle slowly to between 50% ~ 75% (the props will spin!) for 5 ~ 10 seconds. Quickly bring the throttle back down to zero - Quickly bring the throttle back down to zero + Quickly bring the throttle back down to zero Press the Next button to complete the calibration - Press the Next button to complete the calibration + Press the Next button to complete the calibration Hold the vehicle in its level flight position. - Hold the vehicle in its level flight position. + Hold the vehicle in its level flight position. Requesting pressure calibration... - Requesting pressure calibration... + Requesting pressure calibration... Requesting gyro calibration... - Requesting gyro calibration... + Requesting gyro calibration... Successfully completed - Successfully completed + Successfully completed Failed - Failed + Failed Hold still in the current orientation and press Next when ready - Hold still in the current orientation and press Next when ready + Hold still in the current orientation and press Next when ready @@ -3263,37 +3295,37 @@ Click Ok to start calibration. Compass %1 calibration complete - Compass %1 calibration complete + Compass %1 calibration complete Compass %1 calibration below quality threshold - Compass %1 calibration below quality threshold + Compass %1 calibration below quality threshold All compasses calibrated successfully - All compasses calibrated successfully + All compasses calibrated successfully YOU MUST REBOOT YOUR VEHICLE NOW FOR NEW SETTINGS TO TAKE AFFECT - YOU MUST REBOOT YOUR VEHICLE NOW FOR NEW SETTINGS TO TAKE AFFECT + YOU MUST REBOOT YOUR VEHICLE NOW FOR NEW SETTINGS TO TAKE AFFECT Compass calibration failed - Compass calibration failed + Compass calibration failed YOU MUST REBOOT YOUR VEHICLE NOW AND RETRY COMPASS CALIBRATION PRIOR TO FLIGHT - YOU MUST REBOOT YOUR VEHICLE NOW AND RETRY COMPASS CALIBRATION PRIOR TO FLIGHT + YOU MUST REBOOT YOUR VEHICLE NOW AND RETRY COMPASS CALIBRATION PRIOR TO FLIGHT Continue rotating... - Continue rotating... + Continue rotating... @@ -3310,13 +3342,13 @@ Click Ok to start calibration. Setup required - Setup required + Setup required Not installed - Not installed + Not installed @@ -3340,7 +3372,7 @@ Click Ok to start calibration. Ready - Ready + Ready @@ -3348,18 +3380,18 @@ Click Ok to start calibration. Frame - Frame + Frame Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available. - Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available. + Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available. Frame selection - Frame selection + Frame selection @@ -3377,19 +3409,19 @@ Click Ok to start calibration. Yes, Load default parameter set for %1 - Yes, Load default parameter set for %1 + Yes, Load default parameter set for %1 No, set frame only - No, set frame only + No, set frame only Confirm frame %1 - Confirm frame %1 + Confirm frame %1 @@ -3398,13 +3430,13 @@ Click Ok to start calibration. Frame Type - Frame Type + Frame Type Firmware Version - Firmware Version + Firmware Version @@ -3412,13 +3444,13 @@ Click Ok to start calibration. Unknown - Unknown + Unknown Git Revision - Git Revision + Git Revision @@ -3427,7 +3459,7 @@ Click Ok to start calibration. Reverse Motor Direction - Reverse Motor Direction + Reverse Motor Direction @@ -3435,7 +3467,7 @@ Click Ok to start calibration. Moving the sliders will cause the motors to spin. Make sure the motors and propellers are clear from obstructions! The direction of the motor rotation is dependent on how the three phases of the motor are physically connected to the ESCs (if any two wires are swapped, the direction of rotation will flip). Because we cannot guarantee what order the phases are connected, the motor directions must be configured in software. When a slider is moved DOWN, the thruster should push air/water TOWARD the cable entering the housing. Click the checkbox to reverse the direction of the corresponding thruster. Blue Robotics thrusters are lubricated by water and are not designed to be run in air. Testing the thrusters in air is ok at low speeds for short periods of time. Extended operation of Blue Robotics in air may lead to overheating and permanent damage. Without water lubrication, Blue Robotics thrusters may also make some unpleasant noises when operated in air; this is normal. - Moving the sliders will cause the motors to spin. Make sure the motors and propellers are clear from obstructions! The direction of the motor rotation is dependent on how the three phases of the motor are physically connected to the ESCs (if any two wires are swapped, the direction of rotation will flip). Because we cannot guarantee what order the phases are connected, the motor directions must be configured in software. When a slider is moved DOWN, the thruster should push air/water TOWARD the cable entering the housing. Click the checkbox to reverse the direction of the corresponding thruster. + Moving the sliders will cause the motors to spin. Make sure the motors and propellers are clear from obstructions! The direction of the motor rotation is dependent on how the three phases of the motor are physically connected to the ESCs (if any two wires are swapped, the direction of rotation will flip). Because we cannot guarantee what order the phases are connected, the motor directions must be configured in software. When a slider is moved DOWN, the thruster should push air/water TOWARD the cable entering the housing. Click the checkbox to reverse the direction of the corresponding thruster. Blue Robotics thrusters are lubricated by water and are not designed to be run in air. Testing the thrusters in air is ok at low speeds for short periods of time. Extended operation of Blue Robotics in air may lead to overheating and permanent damage. Without water lubrication, Blue Robotics thrusters may also make some unpleasant noises when operated in air; this is normal. @@ -3443,38 +3475,38 @@ Blue Robotics thrusters are lubricated by water and are not designed to be run i A 10 second coooldown is required before testing again, please stand by... - A 10 second coooldown is required before testing again, please stand by... + A 10 second coooldown is required before testing again, please stand by... Slide this switch to arm the vehicle and enable the motor test (CAUTION!) - Slide this switch to arm the vehicle and enable the motor test (CAUTION!) + Slide this switch to arm the vehicle and enable the motor test (CAUTION!) Automatic Motor Direction Detection - Automatic Motor Direction Detection + Automatic Motor Direction Detection This will attempt to automatically detect the direction (normal/reversed) of your thrusters. Please place your vehicle in water, click the button, and wait. Note that the thrusters still need to be connected to the correct outputs (thrusters 2 and 3 can't be swapped, for example). - This will attempt to automatically detect the direction (normal/reversed) of your thrusters. + This will attempt to automatically detect the direction (normal/reversed) of your thrusters. Please place your vehicle in water, click the button, and wait. Note that the thrusters still need to be connected to the correct outputs (thrusters 2 and 3 can't be swapped, for example). APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3484,12 +3516,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th Tuning - Tuning + Tuning Tuning Setup is used to tune the flight characteristics of the Vehicle. - Tuning Setup is used to tune the flight characteristics of the Vehicle. + Tuning Setup is used to tune the flight characteristics of the Vehicle. @@ -3498,163 +3530,163 @@ Please place your vehicle in water, click the button, and wait. Note that the th Basic Tuning - Basic Tuning + Basic Tuning Roll/Pitch Sensitivity - Roll/Pitch Sensitivity + Roll/Pitch Sensitivity Slide to the right if the copter is sluggish or slide to the left if the copter is twitchy - Slide to the right if the copter is sluggish or slide to the left if the copter is twitchy + Slide to the right if the copter is sluggish or slide to the left if the copter is twitchy Climb Sensitivity - Climb Sensitivity + Climb Sensitivity Slide to the right to climb more aggressively or slide to the left to climb more gently - Slide to the right to climb more aggressively or slide to the left to climb more gently + Slide to the right to climb more aggressively or slide to the left to climb more gently RC Roll/Pitch Feel - RC Roll/Pitch Feel + RC Roll/Pitch Feel Slide to the left for soft control, slide to the right for crisp control - Slide to the left for soft control, slide to the right for crisp control + Slide to the left for soft control, slide to the right for crisp control Spin While Armed - Spin While Armed + Spin While Armed Adjust the amount the motors spin to indicate armed - Adjust the amount the motors spin to indicate armed + Adjust the amount the motors spin to indicate armed Minimum Thrust - Minimum Thrust + Minimum Thrust Adjust the minimum amount of thrust require for the vehicle to move - Adjust the minimum amount of thrust require for the vehicle to move + Adjust the minimum amount of thrust require for the vehicle to move Warning: This setting should be higher than 'Spin While Armed' - Warning: This setting should be higher than 'Spin While Armed' + Warning: This setting should be higher than 'Spin While Armed' AutoTune - AutoTune + AutoTune Axes to AutoTune: - Axes to AutoTune: + Axes to AutoTune: Channel for AutoTune switch: - Channel for AutoTune switch: + Channel for AutoTune switch: None - None + None Channel 7 - Channel 7 + Channel 7 Channel 8 - Channel 8 + Channel 8 Channel 9 - Channel 9 + Channel 9 Channel 10 - Channel 10 + Channel 10 Channel 11 - Channel 11 + Channel 11 Channel 12 - Channel 12 + Channel 12 In Flight Tuning - In Flight Tuning + In Flight Tuning RC Channel 6 Option (Tuning): - RC Channel 6 Option (Tuning): + RC Channel 6 Option (Tuning): Min: - Min: + Min: Max: - Max: + Max: Roll - Roll + Roll @@ -3684,7 +3716,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th Pitch - Pitch + Pitch @@ -3714,7 +3746,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th Yaw - Yaw + Yaw @@ -3741,19 +3773,19 @@ Please place your vehicle in water, click the button, and wait. Note that the th Attitude Controller Parameters - Attitude Controller Parameters + Attitude Controller Parameters Position Controller Parameters - Position Controller Parameters + Position Controller Parameters Waypoint navigation parameters - Waypoint navigation parameters + Waypoint navigation parameters @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -3940,7 +3980,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th Your vehicle is using a custom airframe configuration. - Your vehicle is using a custom airframe configuration. + Your vehicle is using a custom airframe configuration. @@ -3948,7 +3988,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th This configuration can only be modified through the Parameter Editor. - This configuration can only be modified through the Parameter Editor. + This configuration can only be modified through the Parameter Editor. @@ -3956,13 +3996,13 @@ Please place your vehicle in water, click the button, and wait. Note that the th If you want to reset your airframe configuration and select a standard configuration, click 'Reset' below. - If you want to reset your airframe configuration and select a standard configuration, click 'Reset' below. + If you want to reset your airframe configuration and select a standard configuration, click 'Reset' below. Reset - Reset + Reset @@ -3974,19 +4014,19 @@ Please place your vehicle in water, click the button, and wait. Note that the th To change this configuration, select the desired airframe below then click 'Apply and Restart'. - To change this configuration, select the desired airframe below then click 'Apply and Restart'. + To change this configuration, select the desired airframe below then click 'Apply and Restart'. You've connected a %1. - You've connected a %1. + You've connected a %1. Airframe is not set. - Airframe is not set. + Airframe is not set. @@ -3994,17 +4034,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Apply and Restart - Apply and Restart + Apply and Restart Airframe - Airframe + Airframe Airframe Setup is used to select the airframe that matches your vehicle. This will in turn set up the various tuning values for flight parameters. - Airframe Setup is used to select the airframe that matches your vehicle. This will in turn set up the various tuning values for flight parameters. + Airframe Setup is used to select the airframe that matches your vehicle. This will in turn set up the various tuning values for flight parameters. @@ -4012,7 +4052,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th You cannot change airframe configuration while connected to multiple vehicles. - You cannot change airframe configuration while connected to multiple vehicles. + You cannot change airframe configuration while connected to multiple vehicles. @@ -4021,13 +4061,13 @@ Please place your vehicle in water, click the button, and wait. Note that the th System ID - System ID + System ID Airframe type - Airframe type + Airframe type @@ -4035,39 +4075,31 @@ Please place your vehicle in water, click the button, and wait. Note that the th Setup required - Setup required + Setup required Vehicle - Vehicle + Vehicle Firmware Version - Firmware Version + Firmware Version Unknown - Unknown + Unknown Custom Fw. Ver. - Custom Fw. Ver. - - - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings + Custom Fw. Ver. @@ -4083,65 +4115,65 @@ Please place your vehicle in water, click the button, and wait. Note that the th Select Altitude Mode - Select Altitude Mode + Select Altitude Mode Relative To Launch - Relative To Launch + Relative To Launch Specified altitudes are relative to launch position height. - Specified altitudes are relative to launch position height. + Specified altitudes are relative to launch position height. AMSL - AMSL + AMSL Specified altitudes are Above Mean Sea Level. - Specified altitudes are Above Mean Sea Level. + Specified altitudes are Above Mean Sea Level. Calculated Above Terrain - Calculated Above Terrain + Calculated Above Terrain Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values. - Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values. + Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values. Terrain Frame - Terrain Frame + Terrain Frame Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor. - Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor. + Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor. Mixed Modes - Mixed Modes + Mixed Modes The altitude mode can differ for each individual item. - The altitude mode can differ for each individual item. + The altitude mode can differ for each individual item. AppLogModel - + Open console log output file failed %1 : %2 - Open console log output file failed %1 : %2 + Open console log output file failed %1 : %2 @@ -4149,57 +4181,57 @@ Please place your vehicle in water, click the button, and wait. Note that the th GStreamer Debug Level - GStreamer Debug Level + GStreamer Debug Level Logging categories - Logging categories + Logging categories - + Search: - Search: + Search: - + Clear - Clear + Clear - + Clear All - Clear All + Clear All Log files (*.txt) - Log files (*.txt) + Log files (*.txt) All Files (*) - All Files (*) + All Files (*) Select log save file - Select log save file + Select log save file Save App Log - Save App Log + Save App Log Show Latest - Show Latest + Show Latest Set Logging - Set Logging + Set Logging @@ -4207,37 +4239,37 @@ Please place your vehicle in water, click the button, and wait. Note that the th Parameters - Parameters + Parameters Telemetry - Telemetry + Telemetry Missions - Missions + Missions Logs - Logs + Logs Video - Video + Video Photo - Photo + Photo CrashLogs - CrashLogs + CrashLogs @@ -4245,335 +4277,699 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) - (Partial) + (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings - Bluetooth Link Settings + + Manual + Manual - - Bluetooth Not Available - Bluetooth Not Available + + Acro + Acro - - - BluetoothLink - - Bluetooth Link Error - Bluetooth Link Error + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings + Bluetooth Link Settings + + + + Bluetooth Not Available + Bluetooth Not Available + + + + BluetoothLink + + + Bluetooth Link Error + Bluetooth Link Error + + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 @@ -4581,27 +4977,55 @@ Click Ok to start the auto-tuning process. Device - Device + Device Address - Address + Address + + + + Bluetooth Devices + Bluetooth Devices + + + + Scan + Scan + + + + Stop + Stop + + + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected - - Bluetooth Devices - Bluetooth Devices + + Socket is not Writable + Socket is not Writable - - Scan - Scan + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 - - Stop - Stop + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -4609,158 +5033,158 @@ Click Ok to start the auto-tuning process. Write failed: %1 - Write failed: %1 + Write failed: %1 Incorrect number of bytes returned for write: actual(%1) expected(%2) - Incorrect number of bytes returned for write: actual(%1) expected(%2) + Incorrect number of bytes returned for write: actual(%1) expected(%2) Timeout waiting for bytes to be available - Timeout waiting for bytes to be available + Timeout waiting for bytes to be available Read failed: error: %1 - Read failed: error: %1 + Read failed: error: %1 Get Command Response: - Get Command Response: + Get Command Response: Invalid sync response: 0x%1 0x%2 - Invalid sync response: 0x%1 0x%2 + Invalid sync response: 0x%1 0x%2 This board is using a microcontroller with faulty silicon and an incorrect configuration and should be put out of service. - This board is using a microcontroller with faulty silicon and an incorrect configuration and should be put out of service. + This board is using a microcontroller with faulty silicon and an incorrect configuration and should be put out of service. Unknown response code - Unknown response code + Unknown response code Command failed: 0x%1 (%2) - Command failed: 0x%1 (%2) + Command failed: 0x%1 (%2) Get Board Info: - Get Board Info: + Get Board Info: Send Command: - Send Command: + Send Command: Unable to open firmware file %1: %2 - Unable to open firmware file %1: %2 + Unable to open firmware file %1: %2 Firmware file read failed: %1 - Firmware file read failed: %1 + Firmware file read failed: %1 Flash failed: %1 at address 0x%2 - Flash failed: %1 at address 0x%2 + Flash failed: %1 at address 0x%2 Unable to retrieve block from ihx: index %1 - Unable to retrieve block from ihx: index %1 + Unable to retrieve block from ihx: index %1 Unable to set flash start address: 0x%2 - Unable to set flash start address: 0x%2 + Unable to set flash start address: 0x%2 Read failed: %1 at address: 0x%2 - Read failed: %1 at address: 0x%2 + Read failed: %1 at address: 0x%2 Compare failed: expected(0x%1) actual(0x%2) at address: 0x%3 - Compare failed: expected(0x%1) actual(0x%2) at address: 0x%3 + Compare failed: expected(0x%1) actual(0x%2) at address: 0x%3 Unable to set read start address: 0x%2 - Unable to set read start address: 0x%2 + Unable to set read start address: 0x%2 CRC mismatch: board(0x%1) file(0x%2) - CRC mismatch: board(0x%1) file(0x%2) + CRC mismatch: board(0x%1) file(0x%2) Open failed on port %1: %2 - Open failed on port %1: %2 + Open failed on port %1: %2 Unable to put radio into command mode +++ - Unable to put radio into command mode +++ + Unable to put radio into command mode +++ Radio did not respond to command mode - Radio did not respond to command mode + Radio did not respond to command mode Radio did not respond to ATI2 command - Radio did not respond to ATI2 command + Radio did not respond to ATI2 command Radio did not return board id - Radio did not return board id + Radio did not return board id Found unsupported bootloader version: %1 - Found unsupported bootloader version: %1 + Found unsupported bootloader version: %1 Unable to reboot radio (ready read) - Unable to reboot radio (ready read) + Unable to reboot radio (ready read) Erase failed: %1 - Erase failed: %1 + Erase failed: %1 Get Device: - Get Device: + Get Device: Get Board Id: - Get Board Id: + Get Board Id: @@ -4768,73 +5192,73 @@ Click Ok to start the auto-tuning process. CameraCalc section version %1 not supported - CameraCalc section version %1 not supported + CameraCalc section version %1 not supported Custom Camera - Custom Camera + Custom Camera Manual (no camera specs) - Manual (no camera specs) + Manual (no camera specs) CameraCalcCamera - + Width - Width + Width - + Height - Height + Height - + Sensor - Sensor + Sensor - + Image - Image + Image - + Focal length - Focal length + Focal length CameraCalcGrid - + Front Lap - Front Lap + Front Lap - + Side Lap - Side Lap + Side Lap - + Overlap - Overlap + Overlap - + Select one: - Select one: + Select one: - + Grnd Res - Grnd Res + Grnd Res @@ -4843,77 +5267,77 @@ Click Ok to start the auto-tuning process. Vehicle must be restarted for changes to take effect. - Vehicle must be restarted for changes to take effect. + Vehicle must be restarted for changes to take effect. Apply and Restart - Apply and Restart + Apply and Restart Camera Trigger Settings - Camera Trigger Settings + Camera Trigger Settings Trigger mode - Trigger mode + Trigger mode Trigger interface - Trigger interface + Trigger interface Time Interval - Time Interval + Time Interval Distance Interval - Distance Interval + Distance Interval Hardware Settings - Hardware Settings + Hardware Settings AUX Pin Assignment - AUX Pin Assignment + AUX Pin Assignment Trigger Pin Polarity - Trigger Pin Polarity + Trigger Pin Polarity Trigger Period - Trigger Period + Trigger Period Camera - Camera + Camera Camera setup is used to adjust camera and gimbal settings. - Camera setup is used to adjust camera and gimbal settings. + Camera setup is used to adjust camera and gimbal settings. @@ -4922,37 +5346,37 @@ Click Ok to start the auto-tuning process. Trigger interface - Trigger interface + Trigger interface Trigger mode - Trigger mode + Trigger mode Time interval - Time interval + Time interval Distance interval - Distance interval + Distance interval AUX pins - AUX pins + AUX pins AUX pin polarity - AUX pin polarity + AUX pin polarity @@ -4972,37 +5396,37 @@ Click Ok to start the auto-tuning process. Camera - Camera + Camera Time - Time + Time Distance - Distance + Distance Mode - Mode + Mode Pitch - Pitch + Pitch Yaw - Yaw + Yaw Gimbal - Gimbal + Gimbal @@ -5010,42 +5434,42 @@ Click Ok to start the auto-tuning process. Center map on: - Center map on: + Center map on: Mission - Mission + Mission All items - All items + All items Launch - Launch + Launch Current Location - Current Location + Current Location Specified Location - Specified Location + Specified Location Vehicle - Vehicle + Vehicle Follow Vehicle - Follow Vehicle + Follow Vehicle @@ -5053,37 +5477,37 @@ Click Ok to start the auto-tuning process. Center map on: - Center map on: + Center map on: Mission - Mission + Mission All items - All items + All items Launch - Launch + Launch Vehicle - Vehicle + Vehicle Current Location - Current Location + Current Location Specified Location - Specified Location + Specified Location @@ -5091,26 +5515,26 @@ Click Ok to start the auto-tuning process. Component %1 - Component %1 + Component %1 - + Internal Error: Parameter MetaData major must be 1 - Internal Error: Parameter MetaData major must be 1 + Internal Error: Parameter MetaData major must be 1 ComplexMissionItem - - + + This Pattern does not support Presets. - This Pattern does not support Presets. + This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. - '%1' is a built-in preset which cannot be deleted. + '%1' is a built-in preset which cannot be deleted. @@ -5126,24 +5550,24 @@ Click Ok to start the auto-tuning process. %1 does not support loading this complex mission item type: %2:%3 - %1 does not support loading this complex mission item type: %2:%3 + %1 does not support loading this complex mission item type: %2:%3 %1 complex item version %2 not supported - %1 complex item version %2 not supported + %1 complex item version %2 not supported Corridor Scan - Corridor Scan + Corridor Scan C - C + C @@ -5151,44 +5575,44 @@ Click Ok to start the auto-tuning process. Corridor - Corridor + Corridor Width - Width + Width Turnaround dist - Turnaround dist + Turnaround dist Use the Polyline Tools to create the polyline which defines the corridor. - Use the Polyline Tools to create the polyline which defines the corridor. + Use the Polyline Tools to create the polyline which defines the corridor. Images in turnarounds - Images in turnarounds + Images in turnarounds CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5211,87 +5635,87 @@ Click Ok to start the auto-tuning process. Generic Initial checks - Generic Initial checks + Generic Initial checks Hardware - Hardware + Hardware Props mounted? Wings secured? Tail secured? - Props mounted? Wings secured? Tail secured? + Props mounted? Wings secured? Tail secured? Please arm the vehicle here - Please arm the vehicle here + Please arm the vehicle here Actuators - Actuators + Actuators Move all control surfaces. Did they work properly? - Move all control surfaces. Did they work properly? + Move all control surfaces. Did they work properly? Motors - Motors + Motors Propellers free? Then throttle up gently. Working properly? - Propellers free? Then throttle up gently. Working properly? + Propellers free? Then throttle up gently. Working properly? Mission - Mission + Mission Please confirm mission is valid (waypoints valid, no terrain collision). - Please confirm mission is valid (waypoints valid, no terrain collision). + Please confirm mission is valid (waypoints valid, no terrain collision). Last preparations before launch - Last preparations before launch + Last preparations before launch Payload - Payload + Payload Configured and started? Payload lid closed? - Configured and started? Payload lid closed? + Configured and started? Payload lid closed? Wind & weather - Wind & weather + Wind & weather OK for your platform? Lauching into the wind? - OK for your platform? Lauching into the wind? + OK for your platform? Lauching into the wind? Flight area - Flight area + Flight area Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? @@ -5299,133 +5723,133 @@ Click Ok to start the auto-tuning process. controller WiFi Bridge - controller WiFi Bridge + controller WiFi Bridge Error fetching WiFi Bridge Status: %1 - Error fetching WiFi Bridge Status: %1 + Error fetching WiFi Bridge Status: %1 ESP WiFi Bridge Settings - ESP WiFi Bridge Settings + ESP WiFi Bridge Settings WiFi Mode - WiFi Mode + WiFi Mode WiFi Channel - WiFi Channel + WiFi Channel WiFi AP SSID - WiFi AP SSID + WiFi AP SSID WiFi AP Password - WiFi AP Password + WiFi AP Password WiFi STA SSID - WiFi STA SSID + WiFi STA SSID WiFi STA Password - WiFi STA Password + WiFi STA Password UART Baud Rate - UART Baud Rate + UART Baud Rate QGC UDP Port - QGC UDP Port + QGC UDP Port ESP WiFi Bridge Status - ESP WiFi Bridge Status + ESP WiFi Bridge Status Bridge/Vehicle Link - Bridge/Vehicle Link + Bridge/Vehicle Link Bridge/QGC Link - Bridge/QGC Link + Bridge/QGC Link QGC/Bridge Link - QGC/Bridge Link + QGC/Bridge Link Messages Received - Messages Received + Messages Received Messages Lost - Messages Lost + Messages Lost Messages Sent - Messages Sent + Messages Sent Restore Defaults - Restore Defaults + Restore Defaults Restart WiFi Bridge - Restart WiFi Bridge + Restart WiFi Bridge Reboot WiFi Bridge - Reboot WiFi Bridge + Reboot WiFi Bridge This will restart the WiFi Bridge so the settings you've changed can take effect. Note that you may have to change your computer WiFi settings and QGroundControl link settings to match these changes. Are you sure you want to restart it? - This will restart the WiFi Bridge so the settings you've changed can take effect. Note that you may have to change your computer WiFi settings and QGroundControl link settings to match these changes. Are you sure you want to restart it? + This will restart the WiFi Bridge so the settings you've changed can take effect. Note that you may have to change your computer WiFi settings and QGroundControl link settings to match these changes. Are you sure you want to restart it? Reset Counters - Reset Counters + Reset Counters WiFi Bridge - WiFi Bridge + WiFi Bridge The ESP8266 WiFi Bridge Component is used to setup the WiFi link. - The ESP8266 WiFi Bridge Component is used to setup the WiFi link. + The ESP8266 WiFi Bridge Component is used to setup the WiFi link. @@ -5433,12 +5857,12 @@ Click Ok to start the auto-tuning process. Firmware Version - Firmware Version + Firmware Version WiFi Mode - WiFi Mode + WiFi Mode @@ -5453,22 +5877,22 @@ Click Ok to start the auto-tuning process. WiFi Channel - WiFi Channel + WiFi Channel WiFi AP SSID - WiFi AP SSID + WiFi AP SSID WiFi AP Password - WiFi AP Password + WiFi AP Password UART Baud Rate - UART Baud Rate + UART Baud Rate @@ -5509,12 +5933,12 @@ Click Ok to start the auto-tuning process. Latitude - Latitude + Latitude Longitude - Longitude + Longitude @@ -5535,35 +5959,27 @@ Click Ok to start the auto-tuning process. Zone - Zone + Zone Hemisphere - Hemisphere + Hemisphere Easting - Easting + Easting Northing - Northing + Northing MGRS - MGRS - - - - ExitWithErrorWindow - - - Close - Close + MGRS @@ -5571,12 +5987,12 @@ Click Ok to start the auto-tuning process. Invalid Nak format - Invalid Nak format + Invalid Nak format errno %1 - errno %1 + errno %1 @@ -5597,13 +6013,13 @@ Click Ok to start the auto-tuning process. Download failed - Download failed + Download failed Download failed: Error saving file - Download failed: Error saving file + Download failed: Error saving file @@ -5611,126 +6027,131 @@ Click Ok to start the auto-tuning process. Set to vehicle heading - Set to vehicle heading + Set to vehicle heading Set to vehicle location - Set to vehicle location + Set to vehicle location - - + + Altitude - Altitude + Altitude - + + Flight Speed + Flight Speed + + + Radius - Radius + Radius - + Loiter clockwise - Loiter clockwise + Loiter clockwise - + Landing point - Landing point + Landing point - + Heading - Heading + Heading - + Glide Slope - Glide Slope + Glide Slope - + Altitudes relative to launch - Altitudes relative to launch + Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. - Drag the loiter point to adjust landing direction for wind and obstacles. + Drag the loiter point to adjust landing direction for wind and obstacles. - + Done - Done + Done - + Camera - Camera + Camera Final approach - Final approach + Final approach Use loiter to altitude - Use loiter to altitude + Use loiter to altitude - + Distance - Distance + Distance - + * Approximate glide slope altitudes. - * Approximate glide slope altitudes. + * Approximate glide slope altitudes. - + * Actual flight path will vary. - * Actual flight path will vary. + * Actual flight path will vary. - + * Avoid tailwind on landing. - * Avoid tailwind on landing. + * Avoid tailwind on landing. - + Click in map to set landing point. - Click in map to set landing point. + Click in map to set landing point. - + - or - - - or - + - or - FWLandingPatternMapVisual - + Loiter - Loiter + Loiter - + Approach - Approach + Approach - + Landing Area - Landing Area + Landing Area - + Glide Slope - Glide Slope + Glide Slope @@ -5738,17 +6159,17 @@ Click Ok to start the auto-tuning process. Unknown: %1 - Unknown: %1 + Unknown: %1 true - true + true false - false + false @@ -5766,12 +6187,12 @@ Click Ok to start the auto-tuning process. Other - Other + Other Misc - Misc + Misc @@ -5787,34 +6208,21 @@ Click Ok to start the auto-tuning process. Value must be within %1 and %2 - Value must be within %1 and %2 + Value must be within %1 and %2 Invalid number - Invalid number - - - - FactSlider - - - N/A - N/A + Invalid number FactTextField - - Invalid Value - Invalid Value - - - + Value Details - Value Details + Value Details @@ -5830,32 +6238,32 @@ Click Ok to start the auto-tuning process. Default - Default + Default Small - Small + Small Medium - Medium + Medium Large - Large + Large Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. Load Settings - Load Settings + Load Settings @@ -5863,30 +6271,30 @@ Click Ok to start the auto-tuning process. Value Details - Value Details + Value Details Firmware Class - + PX4 Pro - PX4 Pro + PX4 Pro - + ArduPilot - ArduPilot + ArduPilot - + Generic - Generic + Generic - + Unknown - Unknown + Unknown @@ -5894,478 +6302,110 @@ Click Ok to start the auto-tuning process. Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short Unsupported record type in file: %1 - Unsupported record type in file: %1 + Unsupported record type in file: %1 Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 Supplied file is not a valid JSON document - Supplied file is not a valid JSON document + Supplied file is not a valid JSON document Firmware file missing required key: %1 - Firmware file missing required key: %1 + Firmware file missing required key: %1 Firmware file has invalid key: %1 - Firmware file has invalid key: %1 + Firmware file has invalid key: %1 Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file Firmware file has 0 length %1 - Firmware file has 0 length %1 + Firmware file has 0 length %1 Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) Successfully decompressed %1 - Successfully decompressed %1 + Successfully decompressed %1 Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 - - - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 - - - - a7r III 35mm - a7r III 35mm - - - - a7r IV 35mm - a7r IV 35mm - - - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 - - - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 - - - - DSC-RX0 - DSC-RX0 - - - - Sony DSC-RX0 - Sony DSC-RX0 - - - - DSC-RX1R II 35mm - DSC-RX1R II 35mm - - - - ILCE-QX1 - ILCE-QX1 - - - - Sony ILCE-QX1 - Sony ILCE-QX1 - - - - NEX-5R 20mm - NEX-5R 20mm - - - - Sony NEX-5R 20mm - Sony NEX-5R 20mm - - - - RX100 II 28mm - RX100 II 28mm - - - - Sony RX100 II 28mm - Sony RX100 II 28mm - - - - - - - Yuneec - Yuneec - - - - CGOET - CGOET - - - - Yuneec CGOET - Yuneec CGOET - - - - E10T - E10T - - - - Yuneec E10T - Yuneec E10T - - - - E50 - E50 - - - - Yuneec E50 - Yuneec E50 - - - - E90 - E90 - - - - Yuneec E90 - Yuneec E90 - - - - - Flir - Flir - - - - Duo R - Duo R - - - - Flir Duo R - Flir Duo R - - - - Duo Pro R - Duo Pro R - - - - - Workswell - Workswell - - - - - Wiris Security - Wiris Security - - - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6373,38 +6413,38 @@ Click Ok to start the auto-tuning process. Firmware - Firmware + Firmware Firmware Setup - Firmware Setup - - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. + Firmware Setup Update the autopilot firmware to the latest version - Update the autopilot firmware to the latest version + Update the autopilot firmware to the latest version All %1 connections to vehicles must be - All %1 connections to vehicles must be + All %1 connections to vehicles must be - + Upgrade cancelled - Upgrade cancelled + Upgrade cancelled Select Firmware File - Select Firmware File + Select Firmware File + + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. @@ -6469,275 +6509,257 @@ Click Ok to start the auto-tuning process. Firmware Files (*.px4 *.apj *.bin *.ihx) - Firmware Files (*.px4 *.apj *.bin *.ihx) + Firmware Files (*.px4 *.apj *.bin *.ihx) All Files (*) - All Files (*) + All Files (*) Multiple devices detected! Remove all detected devices to perform the firmware upgrade. - Multiple devices detected! Remove all detected devices to perform the firmware upgrade. + Multiple devices detected! Remove all detected devices to perform the firmware upgrade. Detected [%1]: - Detected [%1]: + Detected [%1]: Found device - Found device + Found device - - + + PX4 Pro - PX4 Pro + PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) - Standard Version (stable) + Standard Version (stable) - + Beta Testing (beta) - Beta Testing (beta) + Beta Testing (beta) - + Developer Build (master) - Developer Build (master) + Developer Build (master) - - - + + Custom firmware file... - Custom firmware file... - - - - PX4 Pro - PX4 Pro + Custom firmware file... - - + ArduPilot - ArduPilot + ArduPilot - + Standard Version - Standard Version - - - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: + Standard Version - + Detected Pixhawk board. You can select from the following flight stacks: - Detected Pixhawk board. You can select from the following flight stacks: + Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. - Press Ok to upgrade your vehicle. + Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... - Downloading list of available firmwares... + Downloading list of available firmwares... - + No Firmware Available - No Firmware Available + No Firmware Available - + Advanced settings - Advanced settings + Advanced settings - + Select the standard version or one from the file system (previously downloaded): - Select the standard version or one from the file system (previously downloaded): - - - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: + Select the standard version or one from the file system (previously downloaded): - + Select which version of the above flight stack you would like to install: - Select which version of the above flight stack you would like to install: + Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. - WARNING: BETA FIRMWARE. + WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. - This firmware version is ONLY intended for beta testers. + This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. - Although it has received FLIGHT TESTING, it represents actively changed code. + Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. - Do NOT use for normal operation. + Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. - WARNING: CONTINUOUS BUILD FIRMWARE. + WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. - This firmware has NOT BEEN FLIGHT TESTED. + This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. - It is only intended for DEVELOPERS. + It is only intended for DEVELOPERS. - + Run bench tests without props first. - Run bench tests without props first. + Run bench tests without props first. - + Do NOT fly this without additional safety precautions. - Do NOT fly this without additional safety precautions. + Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. - Follow the forums actively when using it. + Follow the forums actively when using it. - + Flash ChibiOS Bootloader - Flash ChibiOS Bootloader + Flash ChibiOS Bootloader FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. - Connect not allowed during Firmware Upgrade. + Connect not allowed during Firmware Upgrade. - + Connected to bootloader: - Connected to bootloader: + Connected to bootloader: - + Version: %1 - Version: %1 + Version: %1 - + Board ID: %1 - Board ID: %1 + Board ID: %1 - + Flash size: %1 - Flash size: %1 + Flash size: %1 - + Custom firmware selected but no filename given. - Custom firmware selected but no filename given. + Custom firmware selected but no filename given. - + Unable to find specified firmware for board type - Unable to find specified firmware for board type + Unable to find specified firmware for board type - + No firmware file selected - No firmware file selected + No firmware file selected - + Downloading firmware... - Downloading firmware... + Downloading firmware... - + From: %1 - From: %1 + From: %1 - + Download complete - Download complete + Download complete - + Image load failed - Image load failed + Image load failed - + Bootloader not found - Bootloader not found + Bootloader not found - + Image size of %1 is too large for board flash size %2 - Image size of %1 is too large for board flash size %2 + Image size of %1 is too large for board flash size %2 - + Upgrade complete - Upgrade complete + Upgrade complete - + Upgrade cancelled - Upgrade cancelled + Upgrade cancelled - + Choose board type - Choose board type + Choose board type @@ -6745,87 +6767,87 @@ Click Ok to start the auto-tuning process. Fixed Wing Initial Checks - Fixed Wing Initial Checks + Fixed Wing Initial Checks Hardware - Hardware + Hardware Props mounted? Wings secured? Tail secured? - Props mounted? Wings secured? Tail secured? + Props mounted? Wings secured? Tail secured? Please arm the vehicle here - Please arm the vehicle here + Please arm the vehicle here Actuators - Actuators + Actuators Move all control surfaces. Did they work properly? - Move all control surfaces. Did they work properly? + Move all control surfaces. Did they work properly? Motors - Motors + Motors Propellers free? Then throttle up gently. Working properly? - Propellers free? Then throttle up gently. Working properly? + Propellers free? Then throttle up gently. Working properly? Mission - Mission + Mission Please confirm mission is valid (waypoints valid, no terrain collision). - Please confirm mission is valid (waypoints valid, no terrain collision). + Please confirm mission is valid (waypoints valid, no terrain collision). Last preparations before launch - Last preparations before launch + Last preparations before launch Payload - Payload + Payload Configured and started? Payload lid closed? - Configured and started? Payload lid closed? + Configured and started? Payload lid closed? Wind & weather - Wind & weather + Wind & weather OK for your platform? Lauching into the wind? - OK for your platform? Lauching into the wind? + OK for your platform? Lauching into the wind? Flight area - Flight area + Flight area Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? @@ -6833,25 +6855,25 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - Fixed Wing Landing + Fixed Wing Landing - + %1 complex item version %2 not supported - %1 complex item version %2 not supported + %1 complex item version %2 not supported FlightDisplayViewVideo - + WAITING FOR VIDEO - WAITING FOR VIDEO + WAITING FOR VIDEO - + VIDEO DISABLED - VIDEO DISABLED + VIDEO DISABLED @@ -6859,16 +6881,7 @@ Click Ok to start the auto-tuning process. Specify Position - Specify Position - - - - FlightModeDropdown - - - N/A - No data to display - N/A + Specify Position @@ -6911,7 +6924,7 @@ Click Ok to start the auto-tuning process. N/A No data to display - N/A + N/A @@ -6943,12 +6956,12 @@ Click Ok to start the auto-tuning process. Flight Modes - Flight Modes + Flight Modes Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes. - Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes. + Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes. @@ -6957,19 +6970,19 @@ Click Ok to start the auto-tuning process. Mode switch - Mode switch + Mode switch Setup required - Setup required + Setup required Flight Mode %1 - Flight Mode %1 + Flight Mode %1 @@ -6978,25 +6991,25 @@ Click Ok to start the auto-tuning process. R rally point map item label - R + R Go here Go to location waypoint - Go here + Go here ROI here Make this a Region Of Interest - ROI here + ROI here Orbit Orbit waypoint - Orbit + Orbit @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7054,37 +7072,37 @@ Click Ok to start the auto-tuning process. Flight Plan complete - Flight Plan complete + Flight Plan complete %1 Images Taken - %1 Images Taken + %1 Images Taken Remove plan from vehicle - Remove plan from vehicle + Remove plan from vehicle Leave plan on vehicle - Leave plan on vehicle + Leave plan on vehicle Resume Mission From Waypoint %1 - Resume Mission From Waypoint %1 + Resume Mission From Waypoint %1 Resume Mission will rebuild the current mission from the last flown waypoint and upload it to the vehicle for the next flight. - Resume Mission will rebuild the current mission from the last flown waypoint and upload it to the vehicle for the next flight. + Resume Mission will rebuild the current mission from the last flown waypoint and upload it to the vehicle for the next flight. If you are changing batteries for Resume Mission do not disconnect from the vehicle. - If you are changing batteries for Resume Mission do not disconnect from the vehicle. + If you are changing batteries for Resume Mission do not disconnect from the vehicle. @@ -7092,159 +7110,159 @@ Click Ok to start the auto-tuning process. Pre-Flight Checklist - Pre-Flight Checklist + Pre-Flight Checklist FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7272,7 +7290,7 @@ Click Ok to start the auto-tuning process. Fly - Fly + Fly @@ -7280,7 +7298,7 @@ Click Ok to start the auto-tuning process. Plan - Plan + Plan @@ -7312,116 +7330,134 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen - Double-click to exit full screen + Double-click to exit full screen + + + + GPSIndicator + + + RTK + RTK GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,56 +7465,56 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units - Units + Units Language - Language + Language Color Scheme - Color Scheme + Color Scheme - + Stream GCS Position - Stream GCS Position + Stream GCS Position - + Mute all audio output - Mute all audio output + Mute all audio output - + Clear all settings on next start - Clear all settings on next start + Clear all settings on next start - + Application Load/Save Path - Application Load/Save Path + Application Load/Save Path - - - + + + Browse - Browse + Browse - + Choose the location to save/load files - Choose the location to save/load files + Choose the location to save/load files - + UI Scaling - UI Scaling + UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image - Brand Image + Brand Image - + Indoor Image - Indoor Image + Indoor Image - - + + Choose custom brand image file - Choose custom brand image file + Choose custom brand image file - + Outdoor Image - Outdoor Image + Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,19 +7566,19 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 - GeoFence supports version %1 + GeoFence supports version %1 - + GeoFence polygon not stored as object - GeoFence polygon not stored as object + GeoFence polygon not stored as object - + GeoFence circle not stored as object - GeoFence circle not stored as object + GeoFence circle not stored as object @@ -7550,97 +7586,97 @@ Click Ok to start the auto-tuning process. GeoFence - GeoFence + GeoFence GeoFencing allows you to set a virtual fence around the area you want to fly in. - GeoFencing allows you to set a virtual fence around the area you want to fly in. + GeoFencing allows you to set a virtual fence around the area you want to fly in. This vehicle does not support GeoFence. - This vehicle does not support GeoFence. + This vehicle does not support GeoFence. Insert GeoFence - Insert GeoFence + Insert GeoFence Polygon Fence - Polygon Fence + Polygon Fence Circular Fence - Circular Fence + Circular Fence Polygon Fences - Polygon Fences + Polygon Fences None - None + None Inclusion - Inclusion + Inclusion Edit - Edit + Edit Delete - Delete + Delete Del - Del + Del Circular Fences - Circular Fences + Circular Fences Radius - Radius + Radius Breach Return Point - Breach Return Point + Breach Return Point Add Breach Return Point - Add Breach Return Point + Add Breach Return Point Remove Breach Return Point - Remove Breach Return Point + Remove Breach Return Point Altitude - Altitude + Altitude @@ -7648,22 +7684,22 @@ Click Ok to start the auto-tuning process. GeoFence load: Vertex count change mid-polygon - actual:expected - GeoFence load: Vertex count change mid-polygon - actual:expected + GeoFence load: Vertex count change mid-polygon - actual:expected GeoFence load: Polygon type changed before last load complete - actual:expected - GeoFence load: Polygon type changed before last load complete - actual:expected + GeoFence load: Polygon type changed before last load complete - actual:expected GeoFence load: Incomplete polygon loaded - GeoFence load: Incomplete polygon loaded + GeoFence load: Incomplete polygon loaded GeoFence load: Unsupported command %1 - GeoFence load: Unsupported command %1 + GeoFence load: Unsupported command %1 @@ -7672,291 +7708,316 @@ Click Ok to start the auto-tuning process. B Breach Return Point item indicator - B + B GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. - + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. + + + The save folder already contains images. - The save folder already contains images. + The save folder already contains images. - + Cannot find the image directory. - Cannot find the image directory. + Cannot find the image directory. - + Couldn't replace the previously tagged images - Couldn't replace the previously tagged images + Couldn't replace the previously tagged images - + Cannot find the save directory. - Cannot find the save directory. + Cannot find the save directory. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file - Select log file + Select log file - + ULog file (*.ulg) - ULog file (*.ulg) + ULog file (*.ulg) - + PX4 log file (*.px4log) - PX4 log file (*.px4log) + PX4 log file (*.px4log) - + All Files (*) - All Files (*) + All Files (*) - - + + Select image directory - Select image directory + Select image directory - + (Optionally) Select save directory - (Optionally) Select save directory + (Optionally) Select save directory Select save directory - Select save directory + Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging - Cancel Tagging + Cancel Tagging - + Start Tagging - Start Tagging + Start Tagging GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format - The image directory doesn't contain images, make sure your images are of the JPG format + The image directory doesn't contain images, make sure your images are of the JPG format - - - Geotagging failed. Couldn't open an image. - Geotagging failed. Couldn't open an image. + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 - - - - - - - Tagging cancelled - Tagging cancelled + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 - - Geotagging failed. Couldn't open log file. - Geotagging failed. Couldn't open log file. + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. - - %1 - tagging cancelled - %1 - tagging cancelled + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. - - Log parsing failed - Log parsing failed + + Geotagging failed. Couldn't open an image. + Geotagging failed. Couldn't open an image. - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 - - Geotagging failed. Requesting image #%1, but only %2 images present. - Geotagging failed. Requesting image #%1, but only %2 images present. + + + + Tagging cancelled + Tagging cancelled + + + + Geotagging failed. Couldn't open log file. + Geotagging failed. Couldn't open log file. - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. + + Log parsing failed + Log parsing failed - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. + + Geotagging failed. Requesting image #%1, but only %2 images present. + Geotagging failed. Requesting image #%1, but only %2 images present. GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -7966,7 +8027,7 @@ Click Ok to start the auto-tuning process. Slide to confirm - Slide to confirm + Slide to confirm @@ -7979,7 +8040,7 @@ Click Ok to start the auto-tuning process. Select Action - Select Action + Select Action @@ -7987,102 +8048,102 @@ Click Ok to start the auto-tuning process. EMERGENCY STOP - EMERGENCY STOP + EMERGENCY STOP Arm - Arm + Arm Disarm - Disarm + Disarm Return - Return + Return Takeoff - Takeoff + Takeoff Land - Land + Land Start Mission - Start Mission + Start Mission Start Mission (MV) - Start Mission (MV) + Start Mission (MV) Continue Mission - Continue Mission + Continue Mission Resume FAILED - Resume FAILED + Resume FAILED Pause - Pause + Pause Pause (MV) - Pause (MV) + Pause (MV) Change Altitude - Change Altitude + Change Altitude Orbit - Orbit + Orbit Land Abort - Land Abort + Land Abort Set Waypoint - Set Waypoint + Set Waypoint Go To Location - Go To Location + Go To Location - + Return to the launch position of the vehicle. - Return to the launch position of the vehicle. + Return to the launch position of the vehicle. VTOL Transition - VTOL Transition + VTOL Transition Force Arm - Force Arm + Force Arm @@ -8102,7 +8163,7 @@ Click Ok to start the auto-tuning process. ROI - ROI + ROI @@ -8112,7 +8173,7 @@ Click Ok to start the auto-tuning process. Action - Action + Action @@ -8125,164 +8186,174 @@ Click Ok to start the auto-tuning process. Set Flight Mode - - Arm the vehicle. - Arm the vehicle. + + Change Heading + Change Heading - WARNING: This will force arming of the vehicle bypassing any safety checks. - WARNING: This will force arming of the vehicle bypassing any safety checks. + Arm the vehicle. + Arm the vehicle. + WARNING: This will force arming of the vehicle bypassing any safety checks. + WARNING: This will force arming of the vehicle bypassing any safety checks. + + + Disarm the vehicle - Disarm the vehicle + Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. - Takeoff from ground and hold position. + Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. - Takeoff from ground and start the current mission. + Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. - Continue the mission from the current waypoint. + Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload - Upload of resume mission failed. Confirm to retry upload + Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. - Land the vehicle at the current position. + Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. - Change the altitude of the vehicle up or down. + Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. - Move the vehicle to the specified location. + Move the vehicle to the specified location. - + Adjust current waypoint to %1. - Adjust current waypoint to %1. + Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. - Orbit the vehicle around the specified location. + Orbit the vehicle around the specified location. - + Abort the landing sequence. - Abort the landing sequence. + Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. - Pause the vehicle at it's current position, adjusting altitude up or down as needed. + Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. - Pause all vehicles at their current position. + Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. - Transition VTOL to fixed wing flight. + Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. - Transition VTOL to multi-rotor flight. + Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. - Make the specified location a Region Of Interest. + Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL - Smart RTL + Smart RTL - + Internal error: unknown actionCode - Internal error: unknown actionCode + Internal error: unknown actionCode @@ -8298,17 +8369,17 @@ Click Ok to start the auto-tuning process. QGroundControl User Guide - QGroundControl User Guide + QGroundControl User Guide PX4 Users Discussion Forum - PX4 Users Discussion Forum + PX4 Users Discussion Forum ArduPilot Users Discussion Forum - ArduPilot Users Discussion Forum + ArduPilot Users Discussion Forum @@ -8320,115 +8391,135 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + - + + + - - + + - - - + - InstrumentValue - + None - None + None - + Color - Color + Color - + Opacity - Opacity + Opacity - + Icon - Icon + Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. - Valuec requires a connected vehicle for setup. + Valuec requires a connected vehicle for setup. - + Icon - Icon + Icon - + Text - Text + Text - + + + Label - Label + Label + + + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change - + Size - Size + Size - + Show Units - Show Units + Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row - Add Row + Add Row - + Specify the icon you want to display based on value ranges. - Specify the icon you want to display based on value ranges. + Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. - Specify the icon opacity you want based on value ranges. + Specify the icon opacity you want based on value ranges. - + Select Icon - Select Icon + Select Icon @@ -8436,160 +8527,160 @@ Click Ok to start the auto-tuning process. --.-- - --.-- + --.-- Joystick - + No Action - No Action + No Action - + Arm - Arm + Arm - + Disarm - Disarm + Disarm - + Toggle Arm - Toggle Arm + Toggle Arm - + VTOL: Fixed Wing - VTOL: Fixed Wing + VTOL: Fixed Wing - + VTOL: Multi-Rotor - VTOL: Multi-Rotor + VTOL: Multi-Rotor - + Continuous Zoom In - Continuous Zoom In + Continuous Zoom In - + Continuous Zoom Out - Continuous Zoom Out + Continuous Zoom Out - + Step Zoom In - Step Zoom In + Step Zoom In - + Step Zoom Out - Step Zoom Out + Step Zoom Out - + Trigger Camera - Trigger Camera + Trigger Camera - + Start Recording Video - Start Recording Video + Start Recording Video - + Stop Recording Video - Stop Recording Video + Stop Recording Video - + Toggle Recording Video - Toggle Recording Video + Toggle Recording Video - + Gimbal Down - Gimbal Down + Gimbal Down - + Gimbal Up - Gimbal Up + Gimbal Up - + Gimbal Left - Gimbal Left + Gimbal Left - + Gimbal Right - Gimbal Right + Gimbal Right - + Gimbal Center - Gimbal Center + Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop - Emergency Stop + Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream - Next Video Stream + Next Video Stream - + Previous Video Stream - Previous Video Stream + Previous Video Stream - + Next Camera - Next Camera + Next Camera - + Previous Camera - Previous Camera + Previous Camera @@ -8597,27 +8688,27 @@ Click Ok to start the auto-tuning process. Joystick - Joystick + Joystick General - General + General Button Assigment - Button Assigment + Button Assigment Calibration - Calibration + Calibration Advanced - Advanced + Advanced @@ -8625,72 +8716,72 @@ Click Ok to start the auto-tuning process. Full down stick is zero throttle - Full down stick is zero throttle + Full down stick is zero throttle Center stick is zero throttle - Center stick is zero throttle + Center stick is zero throttle Spring loaded throttle smoothing - Spring loaded throttle smoothing + Spring loaded throttle smoothing Allow negative Thrust - Allow negative Thrust + Allow negative Thrust Exponential: - Exponential: + Exponential: Enable further advanced settings (careful!) - Enable further advanced settings (careful!) + Enable further advanced settings (careful!) Axis frequency (Hz): - Axis frequency (Hz): + Axis frequency (Hz): Button repeat frequency (Hz): - Button repeat frequency (Hz): + Button repeat frequency (Hz): Enable circle correction - Enable circle correction + Enable circle correction Deadbands - Deadbands + Deadbands Deadband can be set during the first - Deadband can be set during the first + Deadband can be set during the first step of calibration by gently wiggling each axis. - step of calibration by gently wiggling each axis. + step of calibration by gently wiggling each axis. Deadband can also be adjusted by clicking and - Deadband can also be adjusted by clicking and + Deadband can also be adjusted by clicking and dragging vertically on the corresponding axis monitor. - dragging vertically on the corresponding axis monitor. + dragging vertically on the corresponding axis monitor. @@ -8704,22 +8795,22 @@ Click Ok to start the auto-tuning process. Repeat - Repeat + Repeat # - # + # Function: - Function: + Function: Shift Function: - Shift Function: + Shift Function: @@ -8729,7 +8820,7 @@ Click Ok to start the auto-tuning process. No firmware support - No firmware support + No firmware support @@ -8737,30 +8828,30 @@ Click Ok to start the auto-tuning process. Skip - Skip + Skip Cancel - Cancel + Cancel Next - Next + Next Start - Start + Start JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. - Detected %1 joystick axes. To operate PX4, you need at least %2 axes. + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8768,87 +8859,87 @@ Click Ok to start the auto-tuning process. Enable joystick input - Enable joystick input + Enable joystick input Enable not allowed (Calibrate First) - Enable not allowed (Calibrate First) + Enable not allowed (Calibrate First) Active joystick: - Active joystick: + Active joystick: Active joystick name not in combo - Active joystick name not in combo + Active joystick name not in combo RC Mode: - RC Mode: + RC Mode: Lateral - Lateral + Lateral Roll - Roll + Roll Forward - Forward + Forward Pitch - Pitch + Pitch Yaw - Yaw + Yaw Throttle - Throttle + Throttle JoystickIndicator - + Joystick Status - Joystick Status + Joystick Status - + Connected: - Connected: + Connected: - - + + Yes Yes - - + + No No - + Enabled: - Enabled: + Enabled: @@ -8856,27 +8947,27 @@ Click Ok to start the auto-tuning process. File open failed: file:error %1 %2 - File open failed: file:error %1 %2 + File open failed: file:error %1 %2 Unable to open file: '%1', error: %2 - Unable to open file: '%1', error: %2 + Unable to open file: '%1', error: %2 Unable to parse json file: %1 error: %2 offset: %3 - Unable to parse json file: %1 error: %2 offset: %3 + Unable to parse json file: %1 error: %2 offset: %3 Root of json file is not object: %1 - Root of json file is not object: %1 + Root of json file is not object: %1 Json file: '%1'. %2 - Json file: '%1'. %2 + Json file: '%1'. %2 @@ -8884,43 +8975,43 @@ Click Ok to start the auto-tuning process. KML file load failed. %1 - KML file load failed. %1 + KML file load failed. %1 File not found: %1 - File not found: %1 + File not found: %1 Unable to open file: %1 error: $%2 - Unable to open file: %1 error: $%2 + Unable to open file: %1 error: $%2 Unable to parse KML file: %1 error: %2 line: %3 - Unable to parse KML file: %1 error: %2 line: %3 + Unable to parse KML file: %1 error: %2 line: %3 No supported type found in KML file. - No supported type found in KML file. + No supported type found in KML file. Unable to find Polygon node in KML - Unable to find Polygon node in KML + Unable to find Polygon node in KML Internal error: Unable to find coordinates node in KML - Internal error: Unable to find coordinates node in KML + Internal error: Unable to find coordinates node in KML Unable to find LineString node in KML - Unable to find LineString node in KML + Unable to find LineString node in KML @@ -8928,31 +9019,31 @@ Click Ok to start the auto-tuning process. Select Polygon File - Select Polygon File + Select Polygon File LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 - %1 does not support loading this complex mission item type: %2:%3 + %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. - Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,66 +9051,70 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 - Connect not allowed: %1 + Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) - %1 on %2 (AutoConnect) + %1 on %2 (AutoConnect) - + Shutdown - Shutdown + Shutdown - + Serial - Serial + Serial - + UDP - UDP + UDP - + TCP - TCP + TCP - + + Bluetooth + Bluetooth + + + Mock Link - Mock Link + Mock Link - + AirLink AirLink - - + + Log Replay - Log Replay + Log Replay LinkSettings - + Add - Add + Add - + Connect - Connect + Connect @@ -9027,312 +9122,291 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect - Disconnect + Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name - Name + Name - + Enter name - Enter name + Enter name - + Automatically Connect on Start - Automatically Connect on Start + Automatically Connect on Start - + High Latency - High Latency + High Latency - + Type - Type + Type LogDownloadController - + Available - Available + Available - - + Canceled - Canceled + Canceled - - - + + Error - Error + Error - + Downloaded - Downloaded - - - - Timed Out - Timed Out + Downloaded - + Waiting - Waiting - - - - UnknownDate - UnknownDate + Waiting LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id - Id + Id - + Date - Date + Date - + Date Unknown - Date Unknown + Date Unknown - + Size - Size + Size - + Status - Status + Status - + Refresh - Refresh + Refresh - + Log Refresh - Log Refresh + Log Refresh - + You must be connected to a vehicle in order to download logs. - You must be connected to a vehicle in order to download logs. + You must be connected to a vehicle in order to download logs. - + Download - Download + Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory - Select save directory + Select save directory - + Erase All - Erase All + Erase All - + Delete All Log Files - Delete All Log Files + Delete All Log Files - + All log files will be erased permanently. Is this really what you want? - All log files will be erased permanently. Is this really what you want? + All log files will be erased permanently. Is this really what you want? - + Cancel - Cancel - - - - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position + Cancel - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings - Log Replay Link Settings + Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File - Log File + Log File - + Browse - Browse + Browse - + Select Telemetery Log - Select Telemetery Log + Select Telemetery Log - + Telemetry Logs (*.%1) - Telemetry Logs (*.%1) + Telemetry Logs (*.%1) - + All Files (*) - All Files (*) + All Files (*) @@ -9340,203 +9414,237 @@ Click Ok to start the auto-tuning process. Log Replay - Log Replay + Log Replay You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. Select Telemetery Log - Select Telemetery Log + Select Telemetery Log Telemetry Logs (*.%1) - Telemetry Logs (*.%1) + Telemetry Logs (*.%1) All Files (*) - All Files (*) + All Files (*) - + Pause - Pause + Pause - + Play - Play + Play - + Load Telemetry Log - Load Telemetry Log + Load Telemetry Log - + Close - Close + Close + + + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. MAVLink SYS_STATUS_SENSOR value - + Gyro - Gyro + Gyro - + Accelerometer - Accelerometer + Accelerometer - + Magnetometer - Magnetometer + Magnetometer - + Absolute pressure - Absolute pressure + Absolute pressure - + Differential pressure - Differential pressure + Differential pressure - + GPS - GPS + GPS - + Optical flow - Optical flow + Optical flow - + Computer vision position - Computer vision position + Computer vision position - + Laser based position - Laser based position + Laser based position - + External ground truth - External ground truth + External ground truth - + Angular rate control - Angular rate control + Angular rate control - + Attitude stabilization - Attitude stabilization + Attitude stabilization - + Yaw position - Yaw position + Yaw position - + Z/altitude control - Z/altitude control + Z/altitude control - + X/Y position control - X/Y position control + X/Y position control - + Motor outputs / control - Motor outputs / control + Motor outputs / control - + RC receiver - RC receiver + RC receiver - + Gyro 2 - Gyro 2 + Gyro 2 - + Accelerometer 2 - Accelerometer 2 + Accelerometer 2 - + Magnetometer 2 - Magnetometer 2 + Magnetometer 2 - + GeoFence - GeoFence + GeoFence - + AHRS - AHRS + AHRS - + Terrain - Terrain + Terrain - + Motors reversed - Motors reversed + Motors reversed - + Logging - Logging + Logging - + Battery - Battery + Battery - + Proximity - Proximity + Proximity - + Satellite Communication - Satellite Communication + Satellite Communication - + Pre-Arm Check - Pre-Arm Check + Pre-Arm Check - + Avoidance/collision prevention - Avoidance/collision prevention + Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,9 +9652,9 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor - Unknown sensor + Unknown sensor @@ -9554,28 +9662,28 @@ Click Ok to start the auto-tuning process. Scale: - Scale: + Scale: Range: - Range: + Range: MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,81 +9691,81 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec - 5 Sec + 5 Sec - + 10 Sec - 10 Sec + 10 Sec - + 30 Sec - 30 Sec + 30 Sec - + 60 Sec - 60 Sec + 60 Sec - + Auto - Auto + Auto - + 10,000 - 10,000 + 10,000 - + 1,000 - 1,000 + 1,000 - + 100 - 100 + 100 - + 10 - 10 + 10 - + 1 - 1 + 1 - + 0.1 - 0.1 + 0.1 - + 0.01 - 0.01 + 0.01 - + 0.001 - 0.001 + 0.001 - + 0.0001 - 0.0001 + 0.0001 - - - + + + System %1 - System %1 + System %1 @@ -9665,22 +9773,22 @@ Click Ok to start the auto-tuning process. Inspect real time MAVLink messages. - Inspect real time MAVLink messages. + Inspect real time MAVLink messages. Message: - Message: + Message: Component: - Component: + Component: Count: - Count: + Count: @@ -9775,141 +9883,128 @@ Click Ok to start the auto-tuning process. Name - Name + Name Value - Value + Value Type - Type + Type Plot 1 - Plot 1 + Plot 1 Plot 2 - Plot 2 + Plot 2 MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? - There are still active connections to vehicles. Are you sure you want to exit? + There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools - Analyze Tools + Analyze Tools - - + + Vehicle Setup - Vehicle Setup + Vehicle Setup - - + + Application Settings - Application Settings + Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version - %1 Version + %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode - Advanced Mode + Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back - Back + Back @@ -9917,52 +10012,52 @@ Click Ok to start the auto-tuning process. Communication Lost - Communication Lost + Communication Lost Ready To Fly - Ready To Fly + Ready To Fly Not Ready - Not Ready + Not Ready Armed - Armed + Armed Flying - Flying + Flying Landing - Landing + Landing FW(vtol) - FW(vtol) + FW(vtol) MR(vtol) - MR(vtol) + MR(vtol) Sensor Status - Sensor Status + Sensor Status Disarm - Disarm + Disarm @@ -9972,12 +10067,12 @@ Click Ok to start the auto-tuning process. Force Arm - Force Arm + Force Arm Arm - Arm + Arm @@ -10013,12 +10108,12 @@ Click Ok to start the auto-tuning process. Transition to Multi-Rotor - Transition to Multi-Rotor + Transition to Multi-Rotor Transition to Fixed Wing - Transition to Fixed Wing + Transition to Fixed Wing @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10099,203 +10189,203 @@ Click Ok to start the auto-tuning process. km - km + km m - m + m mile - mile + mile miles - miles + miles ft - ft - - - - T - T + ft - + + - + + + - + - - - + - MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10305,7 +10395,7 @@ Click Ok to start the auto-tuning process. No Messages - No Messages + No Messages @@ -10323,15 +10413,15 @@ Click Ok to start the auto-tuning process. Category: - Category: + Category: MissionCommandTree - + All commands - All commands + All commands @@ -10339,39 +10429,39 @@ Click Ok to start the auto-tuning process. Mission item %1 is not an object - Mission item %1 is not an object + Mission item %1 is not an object Unsupported complex item type: %1 - Unsupported complex item type: %1 + Unsupported complex item type: %1 Unknown item type: %1 - Unknown item type: %1 + Unknown item type: %1 Could not find doJumpId: %1 - Could not find doJumpId: %1 + Could not find doJumpId: %1 The mission file is corrupted. - The mission file is corrupted. + The mission file is corrupted. The mission file is not compatible with this version of %1. - The mission file is not compatible with this version of %1. + The mission file is not compatible with this version of %1. Mission: %1 - Mission: %1 + Mission: %1 @@ -10379,61 +10469,61 @@ Click Ok to start the auto-tuning process. Type found: %1 must be: %2 - Type found: %1 must be: %2 + Type found: %1 must be: %2 %1 key must contains 7 values - %1 key must contains 7 values + %1 key must contains 7 values Param %1 incorrect type %2, must be double or null - Param %1 incorrect type %2, must be double or null + Param %1 incorrect type %2, must be double or null MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send - ? + ? - + Move to vehicle position - Move to vehicle position + Move to vehicle position - + Move to previous item position - Move to previous item position + Move to previous item position - + Edit position... - Edit position... + Edit position... - + Show all values - Show all values + Show all values - + Mission Edit - Mission Edit + Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode - You have made changes to the mission item which cannot be shown in Simple Mode + You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 - Item #%1 + Item #%1 @@ -10441,15 +10531,15 @@ Click Ok to start the auto-tuning process. Terrain Altitude - Terrain Altitude + Terrain Altitude MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. - Unable to generate resume mission due to MAV_CMD_DO_JUMP command. + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10457,72 +10547,72 @@ Click Ok to start the auto-tuning process. Firmware - Firmware + Firmware Vehicle - Vehicle + Vehicle Flight speed - Flight speed + Flight speed Above camera commands will take affect immediately upon mission start. - Above camera commands will take affect immediately upon mission start. + Above camera commands will take affect immediately upon mission start. Launch Position - Launch Position + Launch Position Set To Map Center - Set To Map Center + Set To Map Center Vehicle Info - Vehicle Info + Vehicle Info All Altitudes - All Altitudes + All Altitudes Initial Waypoint Alt - Initial Waypoint Alt + Initial Waypoint Alt The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission. - The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission. + The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission. Cruise speed - Cruise speed + Cruise speed Hover speed - Hover speed + Hover speed Altitude - Altitude + Altitude Actual position set by vehicle at flight time. - Actual position set by vehicle at flight time. + Actual position set by vehicle at flight time. @@ -10530,12 +10620,12 @@ Click Ok to start the auto-tuning process. L - L + L Launch - Launch + Launch @@ -10595,20 +10685,7 @@ Click Ok to start the auto-tuning process. Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + Mock Link Settings @@ -10670,37 +10747,37 @@ Do you wish to proceed? Warning: Unable to determine motor count - Warning: Unable to determine motor count + Warning: Unable to determine motor count All - All + All Moving the sliders will causes the motors to spin. Make sure you remove all props. - Moving the sliders will causes the motors to spin. Make sure you remove all props. + Moving the sliders will causes the motors to spin. Make sure you remove all props. Propellers are removed - Enable motor sliders - Propellers are removed - Enable motor sliders + Propellers are removed - Enable motor sliders Careful: Motor sliders are enabled - Careful: Motor sliders are enabled + Careful: Motor sliders are enabled Motors - Motors + Motors Motors Setup is used to manually test motor control and direction. - Motors Setup is used to manually test motor control and direction. + Motors Setup is used to manually test motor control and direction. @@ -10708,77 +10785,77 @@ Do you wish to proceed? Multirotor Initial Checks - Multirotor Initial Checks + Multirotor Initial Checks Hardware - Hardware + Hardware Props mounted and secured? - Props mounted and secured? + Props mounted and secured? Please arm the vehicle here - Please arm the vehicle here + Please arm the vehicle here Motors - Motors + Motors Propellers free? Then throttle up gently. Working properly? - Propellers free? Then throttle up gently. Working properly? + Propellers free? Then throttle up gently. Working properly? Mission - Mission + Mission Please confirm mission is valid (waypoints valid, no terrain collision). - Please confirm mission is valid (waypoints valid, no terrain collision). + Please confirm mission is valid (waypoints valid, no terrain collision). Last preparations before launch - Last preparations before launch + Last preparations before launch Payload - Payload + Payload Configured and started? Payload lid closed? - Configured and started? Payload lid closed? + Configured and started? Payload lid closed? Wind & weather - Wind & weather + Wind & weather OK for your platform? - OK for your platform? + OK for your platform? Flight area - Flight area + Flight area Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? @@ -10786,7 +10863,7 @@ Do you wish to proceed? The following commands will be applied to all vehicles - The following commands will be applied to all vehicles + The following commands will be applied to all vehicles @@ -10803,12 +10880,12 @@ Do you wish to proceed? Armed - Armed + Armed Disarmed - Disarmed + Disarmed @@ -10829,347 +10906,22 @@ Do you wish to proceed? MultiVehicleManager - + Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels - - - - Est Size: - Est Size: - - - - Too many tiles - Too many tiles - - - - Download - Download - - - - - Import - Import - - - - - Export - Export - - - - Options - Options - - - - Offline Maps Options - Offline Maps Options - - - - Select Tile Sets to Export - Select Tile Sets to Export - - - - Select All - Select All - - - - Select None - Select None - - - - Export Tile Set - Export Tile Set - - - - Tile Set Export Progress - Tile Set Export Progress - - - - Tile Set Export Completed - Tile Set Export Completed - - - - Map Tile Set Import - Map Tile Set Import + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11343,22 +11095,30 @@ Is this really what you want? Vehicle Information - Vehicle Information + Vehicle Information Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is. - Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is. + Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is. Firmware - Firmware + Firmware Vehicle - Vehicle + Vehicle + + + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera @@ -11366,27 +11126,27 @@ Is this really what you want? Select Tuning: - Select Tuning: + Select Tuning: Clipboard Values: - Clipboard Values: + Clipboard Values: Save To Clipboard - Save To Clipboard + Save To Clipboard Restore From Clipboard - Restore From Clipboard + Restore From Clipboard Clear - Clear + Clear @@ -11396,27 +11156,27 @@ Is this really what you want? Stop - Stop + Stop Start - Start + Start Automatic Flight Mode Switching - Automatic Flight Mode Switching + Automatic Flight Mode Switching Switches to 'Stabilized' when you click Start. - Switches to 'Stabilized' when you click Start. + Switches to 'Stabilized' when you click Start. Switches to '%1' when you click Stop. - Switches to '%1' when you click Stop. + Switches to '%1' when you click Stop. @@ -11434,173 +11194,178 @@ Is this really what you want? Warning: Hardware In The Loop (HITL) simulation is enabled for this vehicle. - Warning: Hardware In The Loop (HITL) simulation is enabled for this vehicle. + Warning: Hardware In The Loop (HITL) simulation is enabled for this vehicle. PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin Manual - Manual + Manual Acro - Acro + Acro Stabilized - Stabilized + Stabilized Rattitude - Rattitude + Rattitude Altitude - Altitude + Altitude Position - Position + Position Offboard - Offboard + Offboard Ready - Ready + Ready Takeoff - Takeoff + Takeoff Hold - Hold + Hold Mission - Mission + Mission Return - Return + Return Land - Land + Land Precision Land - Precision Land + Precision Land Return to Groundstation - Return to Groundstation + Return to Groundstation Follow Me - Follow Me + Follow Me Simple - Simple + Simple Orbit - Orbit + Orbit - + Unknown %1:%2 - Unknown %1:%2 + Unknown %1:%2 - + Unable to takeoff, vehicle position not known. - Unable to takeoff, vehicle position not known. + Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. - Unable to go to location, vehicle position not known. + Unable to go to location, vehicle position not known. - + Unable to pause vehicle. - Unable to pause vehicle. + Unable to pause vehicle. - + Unable to change altitude, home position unknown. - Unable to change altitude, home position unknown. + Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. - Unable to change altitude, home position altitude unknown. + Unable to change altitude, home position altitude unknown. + + + + Vehicle does not support guided rotate + Vehicle does not support guided rotate - + Unable to start mission: Vehicle rejected arming. - Unable to start mission: Vehicle rejected arming. + Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. - Unable to start mission: Vehicle not changing to %1 flight mode. + Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. - QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11608,32 +11373,32 @@ Is this really what you want? Programming new version... - Programming new version... + Programming new version... Verifying program... - Verifying program... + Verifying program... Verify complete - Verify complete + Verify complete Rebooting board - Rebooting board + Rebooting board Erasing previous program... - Erasing previous program... + Erasing previous program... Erase complete - Erase complete + Erase complete @@ -11641,12 +11406,12 @@ Is this really what you want? Flight Behavior - Flight Behavior + Flight Behavior Flight Behavior is used to configure flight characteristics. - Flight Behavior is used to configure flight characteristics. + Flight Behavior is used to configure flight characteristics. @@ -11655,19 +11420,19 @@ Is this really what you want? Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set) - Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set) + Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set) Responsiveness - Responsiveness + Responsiveness A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. + A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. @@ -11679,25 +11444,25 @@ Is this really what you want? Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set) - Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set) + Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set) Horizontal velocity (m/s) - Horizontal velocity (m/s) + Horizontal velocity (m/s) Limit the horizonal velocity (applies to all modes). - Limit the horizonal velocity (applies to all modes). + Limit the horizonal velocity (applies to all modes). Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set) - Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set) + Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set) @@ -11709,287 +11474,259 @@ Is this really what you want? Limit the vertical velocity (applies to all modes). - Limit the vertical velocity (applies to all modes). + Limit the vertical velocity (applies to all modes). Mission Turning Radius - Mission Turning Radius + Mission Turning Radius Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12017,12 +11754,12 @@ Is this really what you want? Enabled - Enabled + Enabled Disabled - Disabled + Disabled @@ -12030,12 +11767,12 @@ Is this really what you want? Radio - Radio + Radio Radio Setup is used to calibrate your transmitter. It also assign channels for Roll, Pitch, Yaw and Throttle vehicle control as well as determining whether they are reversed. - Radio Setup is used to calibrate your transmitter. It also assign channels for Roll, Pitch, Yaw and Throttle vehicle control as well as determining whether they are reversed. + Radio Setup is used to calibrate your transmitter. It also assign channels for Roll, Pitch, Yaw and Throttle vehicle control as well as determining whether they are reversed. @@ -12044,7 +11781,7 @@ Is this really what you want? Roll - Roll + Roll @@ -12056,31 +11793,31 @@ Is this really what you want? Setup required - Setup required + Setup required Pitch - Pitch + Pitch Yaw - Yaw + Yaw Throttle - Throttle + Throttle Flaps - Flaps + Flaps @@ -12090,19 +11827,19 @@ Is this really what you want? Disabled - Disabled + Disabled Aux1 - Aux1 + Aux1 Aux2 - Aux2 + Aux2 @@ -12111,25 +11848,25 @@ Is this really what you want? Flight Mode Settings - Flight Mode Settings + Flight Mode Settings Mode Channel - Mode Channel + Mode Channel Flight Mode %1 - Flight Mode %1 + Flight Mode %1 Switch Settings - Switch Settings + Switch Settings @@ -12137,12 +11874,12 @@ Is this really what you want? PID Tuning - PID Tuning + PID Tuning Tuning Setup is used to tune the flight controllers. - Tuning Setup is used to tune the flight controllers. + Tuning Setup is used to tune the flight controllers. @@ -12151,25 +11888,25 @@ Is this really what you want? Rate Controller - Rate Controller + Rate Controller Attitude Controller - Attitude Controller + Attitude Controller Velocity Controller - Velocity Controller + Velocity Controller Position Controller - Position Controller + Position Controller @@ -12178,13 +11915,13 @@ Is this really what you want? Roll - Roll + Roll Proportional Gain (MC_ROLL_P) - Proportional Gain (MC_ROLL_P) + Proportional Gain (MC_ROLL_P) @@ -12192,37 +11929,37 @@ Is this really what you want? Increase for more responsiveness, reduce if the attitude overshoots. - Increase for more responsiveness, reduce if the attitude overshoots. + Increase for more responsiveness, reduce if the attitude overshoots. Pitch - Pitch + Pitch Proportional Gain (MC_PITCH_P) - Proportional Gain (MC_PITCH_P) + Proportional Gain (MC_PITCH_P) Yaw - Yaw + Yaw Proportional Gain (MC_YAW_P) - Proportional Gain (MC_YAW_P) + Proportional Gain (MC_YAW_P) Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick). - Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick). + Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick). @@ -12231,25 +11968,25 @@ Is this really what you want? Position control mode (set this to 'simple' during tuning): - Position control mode (set this to 'simple' during tuning): + Position control mode (set this to 'simple' during tuning): Horizontal - Horizontal + Horizontal Horizontal (Y direction, sidewards) - Horizontal (Y direction, sidewards) + Horizontal (Y direction, sidewards) Proportional gain (MPC_XY_P) - Proportional gain (MPC_XY_P) + Proportional gain (MPC_XY_P) @@ -12257,19 +11994,19 @@ Is this really what you want? Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick). - Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick). + Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick). Vertical - Vertical + Vertical Proportional gain (MPC_Z_P) - Proportional gain (MPC_Z_P) + Proportional gain (MPC_Z_P) @@ -12302,13 +12039,13 @@ Is this really what you want? Roll - Roll + Roll Overall Multiplier (MC_ROLLRATE_K) - Overall Multiplier (MC_ROLLRATE_K) + Overall Multiplier (MC_ROLLRATE_K) @@ -12318,13 +12055,13 @@ Is this really what you want? Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help). - Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help). + Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help). Differential Gain (MC_ROLLRATE_D) - Differential Gain (MC_ROLLRATE_D) + Differential Gain (MC_ROLLRATE_D) @@ -12332,13 +12069,13 @@ Is this really what you want? Damping: increase to reduce overshoots and oscillations, but not higher than really needed. - Damping: increase to reduce overshoots and oscillations, but not higher than really needed. + Damping: increase to reduce overshoots and oscillations, but not higher than really needed. Integral Gain (MC_ROLLRATE_I) - Integral Gain (MC_ROLLRATE_I) + Integral Gain (MC_ROLLRATE_I) @@ -12348,49 +12085,49 @@ Is this really what you want? Generally does not need much adjustment, reduce this when seeing slow oscillations. - Generally does not need much adjustment, reduce this when seeing slow oscillations. + Generally does not need much adjustment, reduce this when seeing slow oscillations. Pitch - Pitch + Pitch Overall Multiplier (MC_PITCHRATE_K) - Overall Multiplier (MC_PITCHRATE_K) + Overall Multiplier (MC_PITCHRATE_K) Differential Gain (MC_PITCHRATE_D) - Differential Gain (MC_PITCHRATE_D) + Differential Gain (MC_PITCHRATE_D) Integral Gain (MC_PITCHRATE_I) - Integral Gain (MC_PITCHRATE_I) + Integral Gain (MC_PITCHRATE_I) Yaw - Yaw + Yaw Overall Multiplier (MC_YAWRATE_K) - Overall Multiplier (MC_YAWRATE_K) + Overall Multiplier (MC_YAWRATE_K) Integral Gain (MC_YAWRATE_I) - Integral Gain (MC_YAWRATE_I) + Integral Gain (MC_YAWRATE_I) @@ -12399,25 +12136,25 @@ Is this really what you want? Position control mode (set this to 'simple' during tuning): - Position control mode (set this to 'simple' during tuning): + Position control mode (set this to 'simple' during tuning): Horizontal - Horizontal + Horizontal Horizontal (Y direction, sidewards) - Horizontal (Y direction, sidewards) + Horizontal (Y direction, sidewards) Proportional gain (MPC_XY_VEL_P_ACC) - Proportional gain (MPC_XY_VEL_P_ACC) + Proportional gain (MPC_XY_VEL_P_ACC) @@ -12425,25 +12162,25 @@ Is this really what you want? Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help). - Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help). + Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help). Integral gain (MPC_XY_VEL_I_ACC) - Integral gain (MPC_XY_VEL_I_ACC) + Integral gain (MPC_XY_VEL_I_ACC) Increase to reduce steady-state error (e.g. wind) - Increase to reduce steady-state error (e.g. wind) + Increase to reduce steady-state error (e.g. wind) Differential gain (MPC_XY_VEL_D_ACC) - Differential gain (MPC_XY_VEL_D_ACC) + Differential gain (MPC_XY_VEL_D_ACC) @@ -12451,37 +12188,37 @@ Is this really what you want? Damping: increase to reduce overshoots and oscillations, but not higher than really needed. - Damping: increase to reduce overshoots and oscillations, but not higher than really needed. + Damping: increase to reduce overshoots and oscillations, but not higher than really needed. Vertical - Vertical + Vertical Proportional gain (MPC_Z_VEL_P_ACC) - Proportional gain (MPC_Z_VEL_P_ACC) + Proportional gain (MPC_Z_VEL_P_ACC) Integral gain (MPC_Z_VEL_I_ACC) - Integral gain (MPC_Z_VEL_I_ACC) + Integral gain (MPC_Z_VEL_I_ACC) Increase to reduce steady-state error - Increase to reduce steady-state error + Increase to reduce steady-state error Differential gain (MPC_Z_VEL_D_ACC) - Differential gain (MPC_Z_VEL_D_ACC) + Differential gain (MPC_Z_VEL_D_ACC) @@ -12689,19 +12426,19 @@ Is this really what you want? Altitude & Airspeed - Altitude & Airspeed + Altitude & Airspeed Height rate feed forward (FW_T_HRATE_FF) - Height rate feed forward (FW_T_HRATE_FF) + Height rate feed forward (FW_T_HRATE_FF) TODO - TODO + TODO @@ -12710,7 +12447,7 @@ Is this really what you want? Multirotor - Multirotor + Multirotor @@ -12718,272 +12455,267 @@ Is this really what you want? Load Parameters - Load Parameters + Load Parameters The following parameters from the loaded file differ from what is currently set on the Vehicle. Click 'Ok' to update them on the Vehicle. - The following parameters from the loaded file differ from what is currently set on the Vehicle. Click 'Ok' to update them on the Vehicle. + The following parameters from the loaded file differ from what is currently set on the Vehicle. Click 'Ok' to update them on the Vehicle. There are no differences between the file loaded and the current settings on the Vehicle. - There are no differences between the file loaded and the current settings on the Vehicle. + There are no differences between the file loaded and the current settings on the Vehicle. Comp ID - Comp ID + Comp ID Name - Name + Name File - File + File Vehicle - Vehicle + Vehicle N/A - N/A + N/A ParameterEditor - - Search: - Search: - - - + Clear - Clear + Clear - + Show modified only - Show modified only + Show modified only - + Tools - Tools + Tools - + Refresh - Refresh + Refresh - + Reset all to firmware's defaults - Reset all to firmware's defaults + Reset all to firmware's defaults - - + + Reset All - Reset All + Reset All - + Reset to vehicle's configuration defaults - Reset to vehicle's configuration defaults + Reset to vehicle's configuration defaults - + Load from file... - Load from file... + Load from file... - + Load Parameters - Load Parameters + Load Parameters - + Save to file... - Save to file... + Save to file... - + Save Parameters - Save Parameters + Save Parameters - + Clear all RC to Param - Clear all RC to Param + Clear all RC to Param - + All Files (*) - All Files (*) + All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - Select Reset to reset all parameters to their defaults. + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle - Reboot Vehicle + Reboot Vehicle - + Parameter Files (*.%1) - Parameter Files (*.%1) + Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. - Select Reset to reset all parameters to the vehicle's configuration defaults. + Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. - Select Ok to reboot vehicle. + Select Ok to reboot vehicle. ParameterEditorController - + Unable to create file: %1 - Unable to create file: %1 + Unable to create file: %1 - + Unable to open file: %1 - Unable to open file: %1 + Unable to open file: %1 ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: - Min: + Min: - + Max: - Max: + Max: - + Default: - Default: + Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! - Make sure you know what you are doing and double-check your values before Save! + Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) - Force save (dangerous!) + Force save (dangerous!) - + Advanced settings - Advanced settings + Advanced settings - + Manual Entry - Manual Entry + Manual Entry - + Set RC to Param - Set RC to Param + Set RC to Param ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 - Parameter write failed: veh:%1 comp:%2 param:%3 + Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 - Parameter read failed: veh:%1 comp:%2 param:%3 + Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed - Parameter cache CRC match failed + Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 - Parameters not loaded since they are not currently on the vehicle: %1 + Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 - Parameters not loaded due to type mismatch: %1 + Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. - Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -12996,7 +12728,7 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Free Space: - Free Space: + Free Space: @@ -13006,301 +12738,301 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Battery: - Battery: + Battery: Settings - Settings + Settings Camera - Camera + Camera Video Stream - Video Stream + Video Stream Thermal View Mode - Thermal View Mode + Thermal View Mode Blend Opacity - Blend Opacity + Blend Opacity Photo Mode - Photo Mode + Photo Mode Photo Interval (seconds) - Photo Interval (seconds) + Photo Interval (seconds) Video Grid Lines - Video Grid Lines + Video Grid Lines Video Screen Fit - Video Screen Fit + Video Screen Fit Reset Camera Defaults - Reset Camera Defaults + Reset Camera Defaults Storage - Storage + Storage Off - Off + Off Blend - Blend + Blend Full - Full + Full Picture In Picture - Picture In Picture + Picture In Picture Single - Single + Single Time Lapse - Time Lapse + Time Lapse Reset - Reset + Reset Reset Camera to Factory Settings - Reset Camera to Factory Settings + Reset Camera to Factory Settings Confirm resetting all settings? - Confirm resetting all settings? + Confirm resetting all settings? Format - Format + Format Format Camera Storage - Format Camera Storage + Format Camera Storage Confirm erasing all files? - Confirm erasing all files? + Confirm erasing all files? PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. - Mission request list failed, maximum retries exceeded. + Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count - Retrying %1 REQUEST_LIST retry Count + Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. - Mission read failed, maximum retries exceeded. + Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count - Retrying %1 MISSION_REQUEST retry Count + Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. - Mission write failed, vehicle failed to send final ack. + Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. - Mission write mission count failed, maximum retries exceeded. + Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 - Vehicle did not request all items from ground station: %1 + Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. - Mission remove all, maximum retries exceeded. + Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count - Retrying %1 MISSION_CLEAR_ALL retry Count + Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 - Vehicle did not respond to mission item communication: %1 + Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 - Vehicle remove all failed. Error: %1 + Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 - Item #%1 Command: %2 + Item #%1 Command: %2 - + Frame: %1 - Frame: %1 + Frame: %1 - - - - - - - + + + + + + + Value: %1 - Value: %1 + Value: %1 - + Mission accepted. - Mission accepted. + Mission accepted. - + Unspecified error. - Unspecified error. + Unspecified error. - + Coordinate frame is not supported. - Coordinate frame is not supported. + Coordinate frame is not supported. - + Command is not supported. - Command is not supported. + Command is not supported. - + Mission item exceeds storage space. - Mission item exceeds storage space. + Mission item exceeds storage space. - + One of the parameters has an invalid value. - One of the parameters has an invalid value. + One of the parameters has an invalid value. - + Param 1 invalid value. - Param 1 invalid value. + Param 1 invalid value. - + Param 2 invalid value. - Param 2 invalid value. + Param 2 invalid value. - + Param 3 invalid value. - Param 3 invalid value. + Param 3 invalid value. - + Param 4 invalid value. - Param 4 invalid value. + Param 4 invalid value. - + Param 5 invalid value. - Param 5 invalid value. + Param 5 invalid value. - + Param 6 invalid value. - Param 6 invalid value. + Param 6 invalid value. - + Param 7 invalid value. - Param 7 invalid value. + Param 7 invalid value. - + Received mission item out of sequence. - Received mission item out of sequence. + Received mission item out of sequence. - + Not accepting any mission commands. - Not accepting any mission commands. + Not accepting any mission commands. - + Unknown error: %1. - Unknown error: %1. + Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. - Vehicle returned error: %1. %2Vehicle did not accept guided item. + Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13308,71 +13040,71 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Download not supported on high latency links. - Download not supported on high latency links. + Download not supported on high latency links. Upload not supported on high latency links. - Upload not supported on high latency links. + Upload not supported on high latency links. Error loading Plan file (%1). %2 - Error loading Plan file (%1). %2 + Error loading Plan file (%1). %2 Plan save error %1 : %2 - Plan save error %1 : %2 + Plan save error %1 : %2 KML save error %1 : %2 - KML save error %1 : %2 + KML save error %1 : %2 Supported types (*.%1 *.%2 *.%3 *.%4) - Supported types (*.%1 *.%2 *.%3 *.%4) + Supported types (*.%1 *.%2 *.%3 *.%4) All Files (*) - All Files (*) + All Files (*) Plan Files (*.%1) - Plan Files (*.%1) + Plan Files (*.%1) PlanToolBarIndicators - + Selected Waypoint - Selected Waypoint + Selected Waypoint - + Alt diff: - Alt diff: + Alt diff: - + Azimuth: - Azimuth: + Azimuth: - + Distance: - Distance: + Distance: - + Gradient: - Gradient: + Gradient: @@ -13386,49 +13118,49 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: - Heading: + Heading: - + Total Mission - Total Mission + Total Mission - + Max telem dist: - Max telem dist: + Max telem dist: - + Time: - Time: + Time: - + Battery - Battery + Battery - + Batteries required: - Batteries required: + Batteries required: - + Upload Required - Upload Required + Upload Required - + Upload - Upload + Upload @@ -13436,320 +13168,310 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - Vehicle is currently armed. Do you want to upload the mission to the vehicle? + Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. - You need at least one item to create a KML. + You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. - Plan is waiting on terrain data from server for correct altitude values. + Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload - Plan Upload + Plan Upload - + Select Plan File - Select Plan File + Select Plan File - + Save Plan - Save Plan + Save Plan - + Save KML - Save KML + Save KML - + File - File + File - + Waypoint - Waypoint + Waypoint - + ROI - ROI + ROI - + Pattern - Pattern + Pattern - + Center - Center + Center - + Plan - Plan + Plan - + Apply new altitude - Apply new altitude + Apply new altitude - + Plan View - Vehicle Disconnected - Plan View - Vehicle Disconnected + Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed - Plan View - Vehicle Changed + Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes - Discard Unsaved Changes + Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle - Discard Unsaved Changes, Load New Plan From Vehicle + Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle - Load New Plan From Vehicle + Load New Plan From Vehicle - + Keep Current Plan - Keep Current Plan + Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle - Keep Current Plan, Don't Update From Vehicle + Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. - This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle - Send To Vehicle + Send To Vehicle - + Current mission must be paused prior to uploading a new Plan - Current mission must be paused prior to uploading a new Plan + Current mission must be paused prior to uploading a new Plan - + Fly - Fly + Fly - + Takeoff - Takeoff + Takeoff - + Rally Point - Rally Point + Rally Point - + Cancel ROI - Cancel ROI + Cancel ROI - + Return - Return + Return - + Land - Land + Land - - + + Mission - Mission + Mission - + Fence - Fence + Fence - - + + Rally - Rally + Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - - - Status - Status - - - - Status Error - Status Error + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear - Clear + Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? - Are you sure you want to remove all mission items and clear the mission from the vehicle? + Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: - Create complex pattern: + Create complex pattern: - + You have unsaved changes. - You have unsaved changes. + You have unsaved changes. - + Open... - Open... + Open... - - - + + + Save - Save + Save - - + + Unable to %1 - Unable to %1 + Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. - Plan has incomplete items. Complete all items and %1 again. + Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? - Are you sure you want to remove current plan and create a new plan? + Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. - You have unsaved changes. You should upload to your vehicle, or save to a file. + You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan - Create Plan + Create Plan - + Storage - Storage + Storage - + Save As... - Save As... + Save As... - + Save Mission Waypoints As KML... - Save Mission Waypoints As KML... + Save Mission Waypoints As KML... - + KML - KML + KML - - - + + + Upload - Upload + Upload - + Vehicle - Vehicle + Vehicle - + Download - Download + Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -13831,67 +13525,67 @@ Click 'Ok' to upload the Plan anyway. ESC Calibration - ESC Calibration + ESC Calibration %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade to a newer firmware. - %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade to a newer firmware. + %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade to a newer firmware. %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade %1. - %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade %1. + %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade %1. Performing calibration. This will take a few seconds.. - Performing calibration. This will take a few seconds.. + Performing calibration. This will take a few seconds.. ESC Calibration failed - ESC Calibration failed + ESC Calibration failed ESC Calibration failed. - ESC Calibration failed. + ESC Calibration failed. Calibration complete. You can disconnect your battery now if you like. - Calibration complete. You can disconnect your battery now if you like. + Calibration complete. You can disconnect your battery now if you like. WARNING: Props must be removed from vehicle prior to performing ESC calibration. - WARNING: Props must be removed from vehicle prior to performing ESC calibration. + WARNING: Props must be removed from vehicle prior to performing ESC calibration. Connect the battery now and calibration will begin. - Connect the battery now and calibration will begin. + Connect the battery now and calibration will begin. You must disconnect the battery prior to performing ESC Calibration. Disconnect your battery and try again. - You must disconnect the battery prior to performing ESC Calibration. Disconnect your battery and try again. + You must disconnect the battery prior to performing ESC Calibration. Disconnect your battery and try again. Battery - Battery + Battery @@ -13899,55 +13593,55 @@ Click 'Ok' to upload the Plan anyway. Source - Source + Source Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier. - Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier. + Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier. Measured voltage: - Measured voltage: + Measured voltage: Vehicle voltage: - Vehicle voltage: + Vehicle voltage: Voltage divider: - Voltage divider: + Voltage divider: Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value. - Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value. + Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value. Measured current: - Measured current: + Measured current: Vehicle current: - Vehicle current: + Vehicle current: Amps per volt: - Amps per volt: + Amps per volt: @@ -13959,55 +13653,55 @@ Click 'Ok' to upload the Plan anyway. Calculate - Calculate + Calculate Number of Cells (in Series) - Number of Cells (in Series) + Number of Cells (in Series) Full Voltage (per cell) - Full Voltage (per cell) + Full Voltage (per cell) Battery Max: - Battery Max: + Battery Max: Empty Voltage (per cell) - Empty Voltage (per cell) + Empty Voltage (per cell) Battery Min: - Battery Min: + Battery Min: Voltage divider - Voltage divider + Voltage divider Calculate Voltage Divider - Calculate Voltage Divider + Calculate Voltage Divider If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. - If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. + If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. @@ -14015,155 +13709,155 @@ Click 'Ok' to upload the Plan anyway. Click the Calculate button for help with calculating a new value. - Click the Calculate button for help with calculating a new value. + Click the Calculate button for help with calculating a new value. Amps per volt - Amps per volt + Amps per volt Calculate Amps per Volt - Calculate Amps per Volt + Calculate Amps per Volt If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. - If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. + If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. ESC PWM Minimum and Maximum Calibration - ESC PWM Minimum and Maximum Calibration + ESC PWM Minimum and Maximum Calibration WARNING: Propellers must be removed from vehicle prior to performing ESC calibration. - WARNING: Propellers must be removed from vehicle prior to performing ESC calibration. + WARNING: Propellers must be removed from vehicle prior to performing ESC calibration. You must use USB connection for this operation. - You must use USB connection for this operation. + You must use USB connection for this operation. Calibrate - Calibrate + Calibrate Show UAVCAN Settings - Show UAVCAN Settings + Show UAVCAN Settings UAVCAN Bus Configuration - UAVCAN Bus Configuration + UAVCAN Bus Configuration Change required restart - Change required restart + Change required restart UAVCAN Motor Index and Direction Assignment - UAVCAN Motor Index and Direction Assignment + UAVCAN Motor Index and Direction Assignment WARNING: Propellers must be removed from vehicle prior to performing UAVCAN ESC configuration. - WARNING: Propellers must be removed from vehicle prior to performing UAVCAN ESC configuration. + WARNING: Propellers must be removed from vehicle prior to performing UAVCAN ESC configuration. ESC parameters will only be accessible in the editor after assignment. - ESC parameters will only be accessible in the editor after assignment. + ESC parameters will only be accessible in the editor after assignment. Start the process, then turn each motor into its turn direction, in the order of their motor indices. - Start the process, then turn each motor into its turn direction, in the order of their motor indices. + Start the process, then turn each motor into its turn direction, in the order of their motor indices. Start Assignment - Start Assignment + Start Assignment Stop Assignment - Stop Assignment + Stop Assignment Show Advanced Settings - Show Advanced Settings + Show Advanced Settings Voltage Drop on Full Load (per cell) - Voltage Drop on Full Load (per cell) + Voltage Drop on Full Load (per cell) Batteries show less voltage at high throttle. Enter the difference in Volts between idle throttle and full - Batteries show less voltage at high throttle. Enter the difference in Volts between idle throttle and full + Batteries show less voltage at high throttle. Enter the difference in Volts between idle throttle and full throttle, divided by the number of battery cells. Leave at the default if unsure. - throttle, divided by the number of battery cells. Leave at the default if unsure. + throttle, divided by the number of battery cells. Leave at the default if unsure. If this value is set too high, the battery might be deep discharged and damaged. - If this value is set too high, the battery might be deep discharged and damaged. + If this value is set too high, the battery might be deep discharged and damaged. Compensated Minimum Voltage: - Compensated Minimum Voltage: + Compensated Minimum Voltage: V - V + V Power - Power + Power Power Setup is used to setup battery parameters as well as advanced settings for propellers. - Power Setup is used to setup battery parameters as well as advanced settings for propellers. + Power Setup is used to setup battery parameters as well as advanced settings for propellers. @@ -14172,19 +13866,19 @@ Click 'Ok' to upload the Plan anyway. Battery Full - Battery Full + Battery Full Battery Empty - Battery Empty + Battery Empty Number of Cells - Number of Cells + Number of Cells @@ -14192,22 +13886,22 @@ Click 'Ok' to upload the Plan anyway. Battery - Battery + Battery Battery connector firmly plugged? - Battery connector firmly plugged? + Battery connector firmly plugged? Warning - Battery charge below %1%. - Warning - Battery charge below %1%. + Warning - Battery charge below %1%. Battery charge below %1%. Please recharge. - Battery charge below %1%. Please recharge. + Battery charge below %1%. Please recharge. @@ -14215,7 +13909,7 @@ Click 'Ok' to upload the Plan anyway. Passed - Passed + Passed @@ -14223,7 +13917,7 @@ Click 'Ok' to upload the Plan anyway. (passed) - (passed) + (passed) @@ -14231,27 +13925,27 @@ Click 'Ok' to upload the Plan anyway. Pre-Flight Checklist %1 - Pre-Flight Checklist %1 + Pre-Flight Checklist %1 (passed) - (passed) + (passed) Reset the checklist (e.g. after a vehicle reboot) - Reset the checklist (e.g. after a vehicle reboot) + Reset the checklist (e.g. after a vehicle reboot) (Passed) - (Passed) + (Passed) In Progress - In Progress + In Progress @@ -14259,7 +13953,7 @@ Click 'Ok' to upload the Plan anyway. Checklist - Checklist + Checklist @@ -14267,22 +13961,22 @@ Click 'Ok' to upload the Plan anyway. GPS - GPS + GPS Waiting for 3D lock. - Waiting for 3D lock. + Waiting for 3D lock. Warning - Sat count below %1. - Warning - Sat count below %1. + Warning - Sat count below %1. Waiting for sat count above %1. - Waiting for sat count above %1. + Waiting for sat count above %1. @@ -14290,17 +13984,17 @@ Click 'Ok' to upload the Plan anyway. Radio Control - Radio Control + Radio Control Receiving signal. Perform range test & confirm. - Receiving signal. Perform range test & confirm. + Receiving signal. Perform range test & confirm. No signal or invalid autopilot-RC config. Check RC and console. - No signal or invalid autopilot-RC config. Check RC and console. + No signal or invalid autopilot-RC config. Check RC and console. @@ -14308,42 +14002,42 @@ Click 'Ok' to upload the Plan anyway. Sensors - Sensors + Sensors Failure. Magnetometer issues. Check console. - Failure. Magnetometer issues. Check console. + Failure. Magnetometer issues. Check console. Failure. Accelerometer issues. Check console. - Failure. Accelerometer issues. Check console. + Failure. Accelerometer issues. Check console. Failure. Gyroscope issues. Check console. - Failure. Gyroscope issues. Check console. + Failure. Gyroscope issues. Check console. Failure. Barometer issues. Check console. - Failure. Barometer issues. Check console. + Failure. Barometer issues. Check console. Failure. Airspeed sensor issues. Check console. - Failure. Airspeed sensor issues. Check console. + Failure. Airspeed sensor issues. Check console. Failure. AHRS issues. Check console. - Failure. AHRS issues. Check console. + Failure. AHRS issues. Check console. Failure. GPS issues. Check console. - Failure. GPS issues. Check console. + Failure. GPS issues. Check console. @@ -14351,17 +14045,17 @@ Click 'Ok' to upload the Plan anyway. Sound output - Sound output + Sound output QGC audio output enabled. System audio output enabled, too? - QGC audio output enabled. System audio output enabled, too? + QGC audio output enabled. System audio output enabled, too? QGC audio output is disabled. Please enable it under application settings->general to hear audio warnings! - QGC audio output is disabled. Please enable it under application settings->general to hear audio warnings! + QGC audio output is disabled. Please enable it under application settings->general to hear audio warnings! @@ -14369,50 +14063,43 @@ Click 'Ok' to upload the Plan anyway. --.-- - --.-- + --.-- QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. - There is a newer version of %1 available. You can download it from %2. + There is a newer version of %1 available. You can download it from %2. - + New Version Available - New Version Available - - - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. + New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,34 +14113,34 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration - Vibration + Vibration - + Log Download - Log Download + Log Download - + GeoTag Images - GeoTag Images + GeoTag Images - + MAVLink Console - MAVLink Console + MAVLink Console - + MAVLink Inspector - MAVLink Inspector + MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? - WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14461,7 +14148,7 @@ Click 'Ok' to upload the Plan anyway. GeoFence Circle only supports version %1 - GeoFence Circle only supports version %1 + GeoFence Circle only supports version %1 @@ -14469,7 +14156,7 @@ Click 'Ok' to upload the Plan anyway. GeoFence Polygon only supports version %1 - GeoFence Polygon only supports version %1 + GeoFence Polygon only supports version %1 @@ -14477,210 +14164,202 @@ Click 'Ok' to upload the Plan anyway. Path: %1 - Path: %1 + Path: %1 Delete - Delete + Delete No files - No files + No files New file name: - New file name: + New file name: The file %1 exists. Click Save again to replace it. - The file %1 exists. Click Save again to replace it. + The file %1 exists. Click Save again to replace it. Save to existing file: - Save to existing file: + Save to existing file: QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. - Unabled to find writable download location. Tried downloads and temp directory. + Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 - Could not save downloaded file to %1. Error: %2 + Could not save downloaded file to %1. Error: %2 - + Download cancelled - Download cancelled + Download cancelled - + Error: File Not Found - Error: File Not Found + Error: File Not Found - + Error during download. Error: %1 - Error during download. Error: %1 - - - - QGCLogEntry - - - Pending - Pending + Error during download. Error: %1 QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,22 +14367,14 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All - Comp All + Comp All - + Comp %1 - Comp %1 - - - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + Comp %1 @@ -14711,68 +14382,68 @@ Click 'Ok' to upload the Plan anyway. Select Polygon File - Select Polygon File + Select Polygon File Remove vertex - Remove vertex + Remove vertex Polygon Tools - Polygon Tools + Polygon Tools Click in the map to add vertices. Click 'Done Tracing' when finished. - Click in the map to add vertices. Click 'Done Tracing' when finished. + Click in the map to add vertices. Click 'Done Tracing' when finished. Set radius... - Set radius... + Set radius... Edit position... - Edit position... + Edit position... Edit Center Position - Edit Center Position + Edit Center Position Edit Vertex Position - Edit Vertex Position + Edit Vertex Position Basic - Basic + Basic Circular - Circular + Circular Done Tracing - Done Tracing + Done Tracing Trace - Trace + Trace Load KML/SHP... - Load KML/SHP... + Load KML/SHP... @@ -14780,47 +14451,47 @@ Click 'Ok' to upload the Plan anyway. Polyline Tools - Polyline Tools + Polyline Tools Click in the map to add vertices. Click 'Done Tracing' when finished. - Click in the map to add vertices. Click 'Done Tracing' when finished. + Click in the map to add vertices. Click 'Done Tracing' when finished. Select KML File - Select KML File + Select KML File Remove vertex - Remove vertex + Remove vertex Edit position... - Edit position... + Edit position... Basic - Basic + Basic Done Tracing - Done Tracing + Done Tracing Trace - Trace + Trace Load KML... - Load KML... + Load KML... @@ -14828,89 +14499,89 @@ Click 'Ok' to upload the Plan anyway. Options - Options + Options QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,167 +14589,188 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? - ? + ? - QGroundControlQmlGlobal + QGeoFileTileCacheQGC - - 32 bit - 32 bit + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + QGeoTiledMapReplyQGC - - 64 bit - 64 bit + + Unexpected Error + Unexpected Error - - (AMSL) - (AMSL) + + Empty Reply + Empty Reply - - (CalcT) - (CalcT) + + Image is Empty + Image is Empty - - AMSL - AMSL + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level - - Calc Above Terrain - Calc Above Terrain + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile - - Mixed Modes - Mixed Modes + + Unknown Format + Unknown Format - - (TerrF) - (TerrF) + + Invalid Reply + Invalid Reply - - Relative To Launch - Relative To Launch + + Invalid Cache Tile + Invalid Cache Tile - - Terrain Frame - Terrain Frame + + Network Not Available + Network Not Available - QObject + QGroundControlQmlGlobal - - Unknown - Unknown + + 32 bit + 32 bit - - Pixhawk - Pixhawk + + 64 bit + 64 bit - - SiK Radio - SiK Radio + + (AMSL) + (AMSL) + + + + (CalcT) + (CalcT) - - PX4 Flow - PX4 Flow + + AMSL + AMSL - - OpenPilot - OpenPilot + + Calc Above Terrain + Calc Above Terrain - - RTK GPS - RTK GPS + + Mixed Modes + Mixed Modes - - - Guided mode not supported by Vehicle. - Guided mode not supported by Vehicle. + + (TerrF) + (TerrF) - - Follow Me - Follow Me + + Relative To Launch + Relative To Launch + + + + Terrain Frame + Terrain Frame + + + + QObject + + + + Guided mode not supported by Vehicle. + Guided mode not supported by Vehicle. The following required keys are missing: %1 - The following required keys are missing: %1 + The following required keys are missing: %1 value for coordinate is not array - value for coordinate is not array + value for coordinate is not array Coordinate array must contain %1 values - Coordinate array must contain %1 values + Coordinate array must contain %1 values Coordinate array may only contain double values, found: %1 - Coordinate array may only contain double values, found: %1 + Coordinate array may only contain double values, found: %1 Incorrect value type - key:type:expected %1:%2:%3 - Incorrect value type - key:type:expected %1:%2:%3 + Incorrect value type - key:type:expected %1:%2:%3 Incorrect file type key expected:%1 actual:%2 - Incorrect file type key expected:%1 actual:%2 + Incorrect file type key expected:%1 actual:%2 File version %1 is no longer supported - File version %1 is no longer supported + File version %1 is no longer supported File version %1 is newer than current supported version %2 - File version %1 is newer than current supported version %2 + File version %1 is newer than current supported version %2 value for coordinate array is not array - value for coordinate array is not array + value for coordinate array is not array Unknown type: %1 - Unknown type: %1 + Unknown type: %1 Error - Error + Error A second instance of %1 is already running. Please close the other instance and try again. - A second instance of %1 is already running. Please close the other instance and try again. + A second instance of %1 is already running. Please close the other instance and try again. @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status - RC RSSI Status - - - - RC RSSI Data Unavailable - RC RSSI Data Unavailable + RC RSSI Status - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15128,52 +14809,52 @@ Click 'Ok' to upload the Plan anyway. RC To Param - RC To Param + RC To Param Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page. - Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page. + Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page. Waiting on parameter update from Vehicle. - Waiting on parameter update from Vehicle. + Waiting on parameter update from Vehicle. Parameter - Parameter + Parameter Tuning ID - Tuning ID + Tuning ID Scale - Scale + Scale Center Value - Center Value + Center Value Min Value - Min Value + Min Value Max Value - Max Value + Max Value Double check that all values are correct prior to confirming dialog. - Double check that all values are correct prior to confirming dialog. + Double check that all values are correct prior to confirming dialog. @@ -15181,22 +14862,22 @@ Click 'Ok' to upload the Plan anyway. Reboot required - Reboot required + Reboot required Your stick mappings have changed, you must reboot the vehicle for correct operation. - Your stick mappings have changed, you must reboot the vehicle for correct operation. + Your stick mappings have changed, you must reboot the vehicle for correct operation. Throttle channel reversed - Throttle channel reversed + Throttle channel reversed Calibration failed. The throttle channel on your transmitter is reversed. You must correct this on your transmitter in order to complete calibration. - Calibration failed. The throttle channel on your transmitter is reversed. You must correct this on your transmitter in order to complete calibration. + Calibration failed. The throttle channel on your transmitter is reversed. You must correct this on your transmitter in order to complete calibration. @@ -15208,95 +14889,106 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. - Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Before calibrating you should zero all your trims and subtrims. Click Ok to start Calibration. %1 - Before calibrating you should zero all your trims and subtrims. Click Ok to start Calibration. + Before calibrating you should zero all your trims and subtrims. Click Ok to start Calibration. %1 Please ensure all motor power is disconnected AND all props are removed from the vehicle. - Please ensure all motor power is disconnected AND all props are removed from the vehicle. + Please ensure all motor power is disconnected AND all props are removed from the vehicle. Please turn on transmitter. - Please turn on transmitter. + Please turn on transmitter. %1 channels or more are needed to fly. - %1 channels or more are needed to fly. + %1 channels or more are needed to fly. DSM2 Mode - DSM2 Mode + DSM2 Mode DSMX (7 channels or less) - DSMX (7 channels or less) + DSMX (7 channels or less) DSMX (8 channels or more) - DSMX (8 channels or more) + DSMX (8 channels or more) Not Mapped - Not Mapped + Not Mapped Attitude Controls - Attitude Controls + Attitude Controls Roll - Roll + Roll Pitch - Pitch + Pitch Yaw - Yaw + Yaw Throttle - Throttle + Throttle Skip - Skip + Skip Cancel - Cancel + Cancel Calibrate - Calibrate + Calibrate @@ -15316,29 +15008,29 @@ Click 'Ok' to upload the Plan anyway. Additional Radio setup: - Additional Radio setup: + Additional Radio setup: Spektrum Bind - Spektrum Bind + Spektrum Bind - - + + Copy Trims - Copy Trims + Copy Trims - + Mode 1 - Mode 1 + Mode 1 - + Mode 2 - Mode 2 + Mode 2 @@ -15350,7 +15042,7 @@ Click 'Ok' to upload the Plan anyway. It is recommended to disconnect all motors for additional safety, however, the system is designed to not arm during the calibration. Click Next to continue - Lower the Throttle stick all the way down as shown in diagram. + Lower the Throttle stick all the way down as shown in diagram. It is recommended to disconnect all motors for additional safety, however, the system is designed to not arm during the calibration. @@ -15364,7 +15056,7 @@ Reset all transmitter trims to center. Please ensure all motor power is disconnected AND all props are removed from the vehicle. Click Next to continue - Lower the Throttle stick all the way down as shown in diagram. + Lower the Throttle stick all the way down as shown in diagram. Reset all transmitter trims to center. Please ensure all motor power is disconnected AND all props are removed from the vehicle. @@ -15374,57 +15066,57 @@ Click Next to continue Move the Throttle stick all the way up and hold it there... - Move the Throttle stick all the way up and hold it there... + Move the Throttle stick all the way up and hold it there... Move the Throttle stick all the way down and leave it there... - Move the Throttle stick all the way down and leave it there... + Move the Throttle stick all the way down and leave it there... Move the Yaw stick all the way to the left and hold it there... - Move the Yaw stick all the way to the left and hold it there... + Move the Yaw stick all the way to the left and hold it there... Move the Yaw stick all the way to the right and hold it there... - Move the Yaw stick all the way to the right and hold it there... + Move the Yaw stick all the way to the right and hold it there... Move the Roll stick all the way to the left and hold it there... - Move the Roll stick all the way to the left and hold it there... + Move the Roll stick all the way to the left and hold it there... Move the Roll stick all the way to the right and hold it there... - Move the Roll stick all the way to the right and hold it there... + Move the Roll stick all the way to the right and hold it there... Move the Pitch stick all the way down and hold it there... - Move the Pitch stick all the way down and hold it there... + Move the Pitch stick all the way down and hold it there... Move the Pitch stick all the way up and hold it there... - Move the Pitch stick all the way up and hold it there... + Move the Pitch stick all the way up and hold it there... Allow the Pitch stick to move back to center... - Allow the Pitch stick to move back to center... + Allow the Pitch stick to move back to center... Move all the transmitter switches and/or dials back and forth to their extreme positions. - Move all the transmitter switches and/or dials back and forth to their extreme positions. + Move all the transmitter switches and/or dials back and forth to their extreme positions. All settings have been captured. Click Next to write the new parameters to your board. - All settings have been captured. Click Next to write the new parameters to your board. + All settings have been captured. Click Next to write the new parameters to your board. @@ -15434,7 +15126,7 @@ Reset all transmitter trims to center. Please ensure all motor power is disconnected from the vehicle. Click Next to continue - Center the Throttle stick as shown in diagram. + Center the Throttle stick as shown in diagram. Reset all transmitter trims to center. Please ensure all motor power is disconnected from the vehicle. @@ -15442,21 +15134,21 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next - Next + Next - + Calibrate - Calibrate + Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. - The current calibration settings are now displayed for each channel on screen. + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,14 +15156,14 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 - Rally: %1 + Rally: %1 - + Rally Points supports version %1 - Rally Points supports version %1 + Rally Points supports version %1 @@ -15479,12 +15171,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Rally Points - Rally Points + Rally Points Rally Points provide alternate landing points when performing a Return to Launch (RTL). - Rally Points provide alternate landing points when performing a Return to Launch (RTL). + Rally Points provide alternate landing points when performing a Return to Launch (RTL). @@ -15492,12 +15184,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Rally Point - Rally Point + Rally Point Delete - Delete + Delete @@ -15506,198 +15198,219 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap R rally point map item label - R + R RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS - - - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Arm Status Error + Arm Status Error - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + Basic ID + Basic ID - - Altitude Fixed - Altitude Fixed + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Latitude - Latitude + + + Broadcast + Broadcast - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) + + + + Invalid Operator ID + Invalid Operator ID - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Self ID + Self ID @@ -15705,67 +15418,67 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Rover Initial Checks - Rover Initial Checks + Rover Initial Checks Hardware - Hardware + Hardware Battery mounted and secured? - Battery mounted and secured? + Battery mounted and secured? Please arm the vehicle here - Please arm the vehicle here + Please arm the vehicle here Mission - Mission + Mission Please confirm mission is valid (waypoints valid, no terrain collision). - Please confirm mission is valid (waypoints valid, no terrain collision). + Please confirm mission is valid (waypoints valid, no terrain collision). Last preparations before launch - Last preparations before launch + Last preparations before launch Payload - Payload + Payload Configured and started? Payload lid closed? - Configured and started? Payload lid closed? + Configured and started? Payload lid closed? Wind & weather - Wind & weather + Wind & weather OK for your platform? - OK for your platform? + OK for your platform? Mission area - Mission area + Mission area Mission area and path free of obstacles/people? - Mission area and path free of obstacles/people? + Mission area and path free of obstacles/people? @@ -15773,57 +15486,57 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap SHP file load failed. %1 - SHP file load failed. %1 + SHP file load failed. %1 UTM projection is not in supported format. Must be PROJCS["WGS_1984_UTM_Zone_##N/S - UTM projection is not in supported format. Must be PROJCS["WGS_1984_UTM_Zone_##N/S + UTM projection is not in supported format. Must be PROJCS["WGS_1984_UTM_Zone_##N/S Only WGS84 or UTM projections are supported. - Only WGS84 or UTM projections are supported. + Only WGS84 or UTM projections are supported. PRJ file open failed: %1 - PRJ file open failed: %1 + PRJ file open failed: %1 File not found: %1 - File not found: %1 + File not found: %1 File is not a .shp file: %1 - File is not a .shp file: %1 + File is not a .shp file: %1 SHPOpen failed. - SHPOpen failed. + SHPOpen failed. More than one entity found. - More than one entity found. + More than one entity found. No supported types found. - No supported types found. + No supported types found. File does not contain a polygon. - File does not contain a polygon. + File does not contain a polygon. Only single part polygons are supported. - Only single part polygons are supported. + Only single part polygons are supported. @@ -15832,7 +15545,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Low Battery Failsafe Trigger - Low Battery Failsafe Trigger + Low Battery Failsafe Trigger @@ -15842,37 +15555,37 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Failsafe Action: - Failsafe Action: + Failsafe Action: Battery Warn Level: - Battery Warn Level: + Battery Warn Level: Battery Failsafe Level: - Battery Failsafe Level: + Battery Failsafe Level: Battery Emergency Level: - Battery Emergency Level: + Battery Emergency Level: Object Detection - Object Detection + Object Detection Collision Prevention: - Collision Prevention: + Collision Prevention: @@ -15882,7 +15595,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Disabled - Disabled + Disabled @@ -15892,168 +15605,168 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Enabled - Enabled + Enabled Obstacle Avoidance: - Obstacle Avoidance: + Obstacle Avoidance: Minimum Distance: ( - Minimum Distance: ( + Minimum Distance: ( Show obstacle distance overlay - Show obstacle distance overlay + Show obstacle distance overlay RC Loss Failsafe Trigger - RC Loss Failsafe Trigger + RC Loss Failsafe Trigger RC Loss Timeout: - RC Loss Timeout: + RC Loss Timeout: Data Link Loss Failsafe Trigger - Data Link Loss Failsafe Trigger + Data Link Loss Failsafe Trigger Data Link Loss Timeout: - Data Link Loss Timeout: + Data Link Loss Timeout: Geofence Failsafe Trigger - Geofence Failsafe Trigger + Geofence Failsafe Trigger Action on breach: - Action on breach: + Action on breach: Max Radius: - Max Radius: + Max Radius: Max Altitude: - Max Altitude: + Max Altitude: Return To Launch Settings - Return To Launch Settings + Return To Launch Settings Return to launch, then: - Return to launch, then: + Return to launch, then: Telemetry logging to vehicle storage: - Telemetry logging to vehicle storage: + Telemetry logging to vehicle storage: Climb to altitude of: - Climb to altitude of: + Climb to altitude of: Land immediately - Land immediately + Land immediately Loiter and do not land - Loiter and do not land + Loiter and do not land Loiter and land after specified time - Loiter and land after specified time + Loiter and land after specified time Loiter Time - Loiter Time + Loiter Time Loiter Altitude - Loiter Altitude + Loiter Altitude Land Mode Settings - Land Mode Settings + Land Mode Settings Landing Descent Rate: - Landing Descent Rate: + Landing Descent Rate: Disarm After: - Disarm After: + Disarm After: Vehicle Telemetry Logging - Vehicle Telemetry Logging + Vehicle Telemetry Logging Hardware in the Loop Simulation - Hardware in the Loop Simulation + Hardware in the Loop Simulation HITL Enabled: - HITL Enabled: + HITL Enabled: Safety - Safety + Safety @@ -16062,67 +15775,67 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Low Battery Failsafe - Low Battery Failsafe + Low Battery Failsafe RC Loss Failsafe - RC Loss Failsafe + RC Loss Failsafe RC Loss Timeout - RC Loss Timeout + RC Loss Timeout Data Link Loss Failsafe - Data Link Loss Failsafe + Data Link Loss Failsafe RTL Climb To - RTL Climb To + RTL Climb To RTL, Then - RTL, Then + RTL, Then Land immediately - Land immediately + Land immediately Loiter and do not land - Loiter and do not land + Loiter and do not land Loiter and land after specified time - Loiter and land after specified time + Loiter and land after specified time Loiter Alt - Loiter Alt + Loiter Alt Land Delay - Land Delay + Land Delay @@ -16138,12 +15851,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Sensors - Sensors + Sensors Sensors Setup is used to calibrate the sensors within your vehicle. - Sensors Setup is used to calibrate the sensors within your vehicle. + Sensors Setup is used to calibrate the sensors within your vehicle. @@ -16151,52 +15864,52 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Calibration complete - Calibration complete + Calibration complete Calibration failed. Calibration log will be displayed. - Calibration failed. Calibration log will be displayed. + Calibration failed. Calibration log will be displayed. Unsupported calibration firmware version, using log - Unsupported calibration firmware version, using log + Unsupported calibration firmware version, using log Place your vehicle into one of the Incomplete orientations shown below and hold it still - Place your vehicle into one of the Incomplete orientations shown below and hold it still + Place your vehicle into one of the Incomplete orientations shown below and hold it still Rotate the vehicle continuously as shown in the diagram until marked as Completed - Rotate the vehicle continuously as shown in the diagram until marked as Completed + Rotate the vehicle continuously as shown in the diagram until marked as Completed Hold still in the current orientation - Hold still in the current orientation + Hold still in the current orientation Place you vehicle into one of the orientations shown below and hold it still - Place you vehicle into one of the orientations shown below and hold it still + Place you vehicle into one of the orientations shown below and hold it still Orientation already completed, place you vehicle into one of the incomplete orientations shown below and hold it still - Orientation already completed, place you vehicle into one of the incomplete orientations shown below and hold it still + Orientation already completed, place you vehicle into one of the incomplete orientations shown below and hold it still Reset successful - Reset successful + Reset successful Reset failed - Reset failed + Reset failed @@ -16205,7 +15918,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Compass 0 - Compass 0 + Compass 0 @@ -16215,7 +15928,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Setup required - Setup required + Setup required @@ -16229,31 +15942,31 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Ready - Ready + Ready Compass 1 - Compass 1 + Compass 1 Compass 2 - Compass 2 + Compass 2 Gyro - Gyro + Gyro Accelerometer - Accelerometer + Accelerometer @@ -16262,7 +15975,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Compass: - Compass: + Compass: @@ -16274,7 +15987,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Setup required - Setup required + Setup required @@ -16286,25 +15999,25 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Ready - Ready + Ready Gyro: - Gyro: + Gyro: Accelerometer: - Accelerometer: + Accelerometer: Airspeed: - Airspeed: + Airspeed: @@ -16315,85 +16028,85 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap If the orientation is in the direction of flight, select ROTATION_NONE. - If the orientation is in the direction of flight, select ROTATION_NONE. + If the orientation is in the direction of flight, select ROTATION_NONE. For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor. Do not touch the sensor or obstruct any holes during the calibration. - For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor. Do not touch the sensor or obstruct any holes during the calibration. + For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor. Do not touch the sensor or obstruct any holes during the calibration. Start the individual calibration steps by clicking one of the buttons to the left. - Start the individual calibration steps by clicking one of the buttons to the left. + Start the individual calibration steps by clicking one of the buttons to the left. Compass Calibration Complete - Compass Calibration Complete + Compass Calibration Complete Calibration Cancel - Calibration Cancel + Calibration Cancel Sensor Calibration - Sensor Calibration + Sensor Calibration Performing sensor calibration over a WiFi connection is known to be unreliable. You should disconnect and perform calibration using a direct USB connection instead. - Performing sensor calibration over a WiFi connection is known to be unreliable. You should disconnect and perform calibration using a direct USB connection instead. + Performing sensor calibration over a WiFi connection is known to be unreliable. You should disconnect and perform calibration using a direct USB connection instead. Waiting for Vehicle to response to Cancel. This may take a few seconds. - Waiting for Vehicle to response to Cancel. This may take a few seconds. + Waiting for Vehicle to response to Cancel. This may take a few seconds. Set autopilot orientation before calibrating. - Set autopilot orientation before calibrating. + Set autopilot orientation before calibrating. Reboot Vehicle - Reboot Vehicle + Reboot Vehicle For Compass calibration you will need to rotate your vehicle through a number of positions. - For Compass calibration you will need to rotate your vehicle through a number of positions. + For Compass calibration you will need to rotate your vehicle through a number of positions. For Gyroscope calibration you will need to place your vehicle on a surface and leave it still. - For Gyroscope calibration you will need to place your vehicle on a surface and leave it still. + For Gyroscope calibration you will need to place your vehicle on a surface and leave it still. For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds. - For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds. + For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds. To level the horizon you need to place the vehicle in its level flight position and leave still. - To level the horizon you need to place the vehicle in its level flight position and leave still. + To level the horizon you need to place the vehicle in its level flight position and leave still. @@ -16401,25 +16114,25 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Autopilot Orientation - Autopilot Orientation + Autopilot Orientation ROTATION_NONE indicates component points in direction of flight. - ROTATION_NONE indicates component points in direction of flight. + ROTATION_NONE indicates component points in direction of flight. Click Ok to start calibration. - Click Ok to start calibration. + Click Ok to start calibration. Reboot the vehicle prior to flight. - Reboot the vehicle prior to flight. + Reboot the vehicle prior to flight. @@ -16427,7 +16140,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap Adjust orientations as needed. ROTATION_NONE indicates component points in direction of flight. - Adjust orientations as needed. + Adjust orientations as needed. ROTATION_NONE indicates component points in direction of flight. @@ -16435,43 +16148,43 @@ ROTATION_NONE indicates component points in direction of flight. Mag %1 Orientation - Mag %1 Orientation + Mag %1 Orientation Compass - Compass + Compass Calibrate Compass - Calibrate Compass + Calibrate Compass Gyroscope - Gyroscope + Gyroscope Calibrate Gyro - Calibrate Gyro + Calibrate Gyro Accelerometer - Accelerometer + Accelerometer Calibrate Accelerometer - Calibrate Accelerometer + Calibrate Accelerometer @@ -16479,43 +16192,43 @@ ROTATION_NONE indicates component points in direction of flight. Level Horizon - Level Horizon + Level Horizon Airspeed - Airspeed + Airspeed Calibrate Airspeed - Calibrate Airspeed + Calibrate Airspeed Cancel - Cancel + Cancel Next - Next + Next Orientations - Orientations + Orientations Set Orientations - Set Orientations + Set Orientations @@ -16531,7 +16244,7 @@ ROTATION_NONE indicates component points in direction of flight. Rotate - Rotate + Rotate @@ -16547,44 +16260,34 @@ ROTATION_NONE indicates component points in direction of flight. Hold Still - Hold Still + Hold Still Factory reset - Factory reset + Factory reset SerialConfiguration - + Serial Link Settings - Serial Link Settings + Serial Link Settings SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16592,62 +16295,100 @@ ROTATION_NONE indicates component points in direction of flight. Baud rate name not in combo box - Baud rate name not in combo box + Baud rate name not in combo box Enable Flow Control - Enable Flow Control + Enable Flow Control Serial Port - Serial Port + Serial Port None Available - None Available + None Available Baud Rate - Baud Rate + Baud Rate Advanced Settings - Advanced Settings + Advanced Settings Parity - Parity + Parity None - None + None Even - Even + Even Odd - Odd + Odd Data Bits - Data Bits + Data Bits Stop Bits - Stop Bits + Stop Bits + + + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -16733,27 +16474,27 @@ ROTATION_NONE indicates component points in direction of flight. armed - armed + armed flying - flying + flying %1 Setup - %1 Setup + %1 Setup Advanced - Advanced + Advanced (Disabled while the vehicle is %1) - (Disabled while the vehicle is %1) + (Disabled while the vehicle is %1) @@ -16761,67 +16502,67 @@ ROTATION_NONE indicates component points in direction of flight. This operation cannot be performed while the vehicle is armed. - This operation cannot be performed while the vehicle is armed. + This operation cannot be performed while the vehicle is armed. missing message panel text - missing message panel text + missing message panel text - + %1 setup must be completed prior to %2 setup. - %1 setup must be completed prior to %2 setup. + %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. - %1 does not currently support setup of your vehicle type. + %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. - Vehicle settings and info will display after connecting your vehicle. + Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. - You are currently connected to a vehicle but it did not return the full parameter list. + You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. - As a result, the full set of vehicle setup options are not available. + As a result, the full set of vehicle setup options are not available. - + Summary - Summary + Summary - + Firmware - Firmware + Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick - Joystick + Joystick - + Buttons Buttons - + Parameters - Parameters + Parameters @@ -16829,27 +16570,27 @@ ROTATION_NONE indicates component points in direction of flight. Shape file load failed. %1 - Shape file load failed. %1 + Shape file load failed. %1 Unsupported file type. Only .%1 and .%2 are supported. - Unsupported file type. Only .%1 and .%2 are supported. + Unsupported file type. Only .%1 and .%2 are supported. Polyline not support from SHP files. - Polyline not support from SHP files. + Polyline not support from SHP files. KML Files (*.%1) - KML Files (*.%1) + KML Files (*.%1) KML/SHP Files (*.%1 *.%2) - KML/SHP Files (*.%1 *.%2) + KML/SHP Files (*.%1 *.%2) @@ -16857,130 +16598,130 @@ ROTATION_NONE indicates component points in direction of flight. Move '%1' %2 to the %3 location. %4 - Move '%1' %2 to the %3 location. %4 + Move '%1' %2 to the %3 location. %4 Altitude - Altitude + Altitude Internal Error - Internal Error + Internal Error Provides advanced access to all commands/parameters. Be very careful! - Provides advanced access to all commands/parameters. Be very careful! + Provides advanced access to all commands/parameters. Be very careful! T - T + T Transition Direction - Transition Direction + Transition Direction Takeoff - Takeoff + Takeoff desired - desired + desired climbout - climbout + climbout Ensure distance from launch to transition direction is far enough to complete transition. - Ensure distance from launch to transition direction is far enough to complete transition. + Ensure distance from launch to transition direction is far enough to complete transition. Ensure clear of obstacles and into the wind. - Ensure clear of obstacles and into the wind. + Ensure clear of obstacles and into the wind. Done - Done + Done Click in map to set planned Takeoff location. - Click in map to set planned Takeoff location. + Click in map to set planned Takeoff location. Click in map to set planned Launch location. - Click in map to set planned Launch location. + Click in map to set planned Launch location. Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location. - Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location. + Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location. Actual AMSL alt sent: %1 %2 - Actual AMSL alt sent: %1 %2 + Actual AMSL alt sent: %1 %2 Flight Speed - Flight Speed + Flight Speed SimpleMissionItem - + Unknown: %1 - Unknown: %1 + Unknown: %1 - + L - L + L - + Takeoff - Takeoff + Takeoff - + Land - Land + Land - + Transition Direction - Transition Direction + Transition Direction - + VTOL Land - VTOL Land + VTOL Land - + ROI - ROI + ROI - + Loiter - Loiter + Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17053,19 +16794,19 @@ ROTATION_NONE indicates component points in direction of flight. %1 does not support loading this complex mission item type: %2:%3 - %1 does not support loading this complex mission item type: %2:%3 + %1 does not support loading this complex mission item type: %2:%3 %1 version %2 not supported - %1 version %2 not supported + %1 version %2 not supported Structure Scan - Structure Scan + Structure Scan @@ -17073,119 +16814,119 @@ ROTATION_NONE indicates component points in direction of flight. Use the Polygon Tools to create the polygon which outlines the structure. - Use the Polygon Tools to create the polygon which outlines the structure. + Use the Polygon Tools to create the polygon which outlines the structure. Grid - Grid + Grid Camera - Camera + Camera Note: Polygon respresents structure surface not vehicle flight path. - Note: Polygon respresents structure surface not vehicle flight path. + Note: Polygon respresents structure surface not vehicle flight path. WARNING: Photo interval is below minimum interval (%1 secs) supported by camera. - WARNING: Photo interval is below minimum interval (%1 secs) supported by camera. + WARNING: Photo interval is below minimum interval (%1 secs) supported by camera. Scan Distance - Scan Distance + Scan Distance Layer Height - Layer Height + Layer Height Trigger Distance - Trigger Distance + Trigger Distance Scan - Scan + Scan Start Scan From Bottom - Start Scan From Bottom + Start Scan From Bottom Start Scan From Top - Start Scan From Top + Start Scan From Top Structure Height - Structure Height + Structure Height Scan Bottom Alt - Scan Bottom Alt + Scan Bottom Alt Entrance/Exit Alt - Entrance/Exit Alt + Entrance/Exit Alt Gimbal Pitch - Gimbal Pitch + Gimbal Pitch Rotate entry point - Rotate entry point + Rotate entry point Statistics - Statistics + Statistics Layers - Layers + Layers Top Layer Alt - Top Layer Alt + Top Layer Alt Bottom Layer Alt - Bottom Layer Alt + Bottom Layer Alt Photo Count - Photo Count + Photo Count Photo Interval - Photo Interval + Photo Interval secs - secs + secs @@ -17193,67 +16934,67 @@ ROTATION_NONE indicates component points in direction of flight. Submarine Initial checks - Submarine Initial checks + Submarine Initial checks Hardware - Hardware + Hardware All seals in place? - All seals in place? + All seals in place? Please arm the vehicle here - Please arm the vehicle here + Please arm the vehicle here Actuators - Actuators + Actuators Move all control surfaces. Did they work properly? - Move all control surfaces. Did they work properly? + Move all control surfaces. Did they work properly? Motors - Motors + Motors Propellers free? Then throttle up gently. Working properly? - Propellers free? Then throttle up gently. Working properly? + Propellers free? Then throttle up gently. Working properly? Mission - Mission + Mission Please confirm mission is valid (waypoints valid, no terrain collision). - Please confirm mission is valid (waypoints valid, no terrain collision). + Please confirm mission is valid (waypoints valid, no terrain collision). Last preparations before launch - Last preparations before launch + Last preparations before launch Payload - Payload + Payload Configured and started? Payload lid closed? - Configured and started? Payload lid closed? + Configured and started? Payload lid closed? @@ -17261,30 +17002,30 @@ ROTATION_NONE indicates component points in direction of flight. Survey items do not support version %1 - Survey items do not support version %1 + Survey items do not support version %1 %1 does not support loading this complex mission item type: %2:%3 - %1 does not support loading this complex mission item type: %2:%3 + %1 does not support loading this complex mission item type: %2:%3 %1 but %2 object is missing - %1 but %2 object is missing + %1 but %2 object is missing Survey - Survey + Survey S - S + S @@ -17292,47 +17033,47 @@ ROTATION_NONE indicates component points in direction of flight. Use the Polygon Tools to create the polygon which outlines your survey area. - Use the Polygon Tools to create the polygon which outlines your survey area. + Use the Polygon Tools to create the polygon which outlines your survey area. Transects - Transects + Transects Angle - Angle + Angle Turnaround dist - Turnaround dist + Turnaround dist Hover and capture image - Hover and capture image + Hover and capture image Refly at 90 deg offset - Refly at 90 deg offset + Refly at 90 deg offset Images in turnarounds - Images in turnarounds + Images in turnarounds Fly alternate transects - Fly alternate transects + Fly alternate transects Select Polygon File - Select Polygon File + Select Polygon File @@ -17340,17 +17081,17 @@ ROTATION_NONE indicates component points in direction of flight. Error - Error + Error Normal - Normal + Normal Disabled - Disabled + Disabled @@ -17358,17 +17099,17 @@ ROTATION_NONE indicates component points in direction of flight. Radio Settings - Radio Settings + Radio Settings Channel - Channel + Channel Address - Address + Address @@ -17378,7 +17119,7 @@ ROTATION_NONE indicates component points in direction of flight. Data Rate - Data Rate + Data Rate @@ -17388,39 +17129,61 @@ ROTATION_NONE indicates component points in direction of flight. Syslink - Syslink + Syslink The Syslink Component is used to setup the radio connection on Crazyflies. - The Syslink Component is used to setup the radio connection on Crazyflies. + The Syslink Component is used to setup the radio connection on Crazyflies. TCPConfiguration - + TCP Link Settings - TCP Link Settings + TCP Link Settings TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17436,7 +17199,7 @@ ROTATION_NONE indicates component points in direction of flight. Launch - Launch + Launch @@ -17444,61 +17207,61 @@ ROTATION_NONE indicates component points in direction of flight. Server Address - Server Address + Server Address Port - Port + Port TelemetryRSSIIndicator - + Telemetry RSSI Status - Telemetry RSSI Status + Telemetry RSSI Status - + Local RSSI: - Local RSSI: + Local RSSI: - - + + dBm dBm - + Remote RSSI: - Remote RSSI: + Remote RSSI: - + RX Errors: - RX Errors: + RX Errors: - + Errors Fixed: - Errors Fixed: + Errors Fixed: - + TX Buffer: - TX Buffer: + TX Buffer: - + Local Noise: - Local Noise: + Local Noise: - + Remote Noise: - Remote Noise: + Remote Noise: @@ -17669,12 +17432,12 @@ ROTATION_NONE indicates component points in direction of flight. Terrain Load Progress - Terrain Load Progress + Terrain Load Progress Done - Done + Done @@ -17682,13 +17445,13 @@ ROTATION_NONE indicates component points in direction of flight. Height AMSL (%1) - Height AMSL (%1) + Height AMSL (%1) ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17698,18 +17461,18 @@ ROTATION_NONE indicates component points in direction of flight. TransectStyleComplexItem version %2 not supported - TransectStyleComplexItem version %2 not supported + TransectStyleComplexItem version %2 not supported Transect - Transect + Transect T - T + T @@ -17717,94 +17480,94 @@ ROTATION_NONE indicates component points in direction of flight. Done - Done + Done WARNING: Photo interval is below minimum interval (%1 secs) supported by camera. - WARNING: Photo interval is below minimum interval (%1 secs) supported by camera. + WARNING: Photo interval is below minimum interval (%1 secs) supported by camera. Altitude - Altitude + Altitude Trigger Dist - Trigger Dist + Trigger Dist Spacing - Spacing + Spacing Rotate Entry Point - Rotate Entry Point + Rotate Entry Point Statistics - Statistics + Statistics Presets - Presets + Presets Apply Preset - Apply Preset + Apply Preset Delete Preset - Delete Preset + Delete Preset Are you sure you want to delete '%1' preset? - Are you sure you want to delete '%1' preset? + Are you sure you want to delete '%1' preset? Save Settings As New Preset - Save Settings As New Preset + Save Settings As New Preset Save Preset - Save Preset + Save Preset Save the current settings as a named preset. - Save the current settings as a named preset. + Save the current settings as a named preset. Preset Name - Preset Name + Preset Name Enter preset name - Enter preset name + Enter preset name Preset name cannot be blank. - Preset name cannot be blank. + Preset name cannot be blank. Preset name cannot include the "/" character. - Preset name cannot include the "/" character. + Preset name cannot include the "/" character. @@ -17812,27 +17575,27 @@ ROTATION_NONE indicates component points in direction of flight. Survey Area - Survey Area + Survey Area Photo Count - Photo Count + Photo Count Photo Interval - Photo Interval + Photo Interval secs - secs + secs Trigger Distance - Trigger Distance + Trigger Distance @@ -17840,147 +17603,184 @@ ROTATION_NONE indicates component points in direction of flight. Tolerance - Tolerance + Tolerance Max Climb Rate - Max Climb Rate + Max Climb Rate Max Descent Rate - Max Descent Rate + Max Descent Rate UDPConfiguration - + UDP Link Settings - UDP Link Settings + UDP Link Settings UDPLink - - + UDP Link Error - UDP Link Error + UDP Link Error + + + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! + + + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Invalid sockfd + Invalid sockfd - - Error registering Zeroconf - Error registering Zeroconf + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18039,32 +17839,32 @@ ROTATION_NONE indicates component points in direction of flight. Note: For best perfomance, please disable AutoConnect to UDP devices on the General page. - Note: For best perfomance, please disable AutoConnect to UDP devices on the General page. + Note: For best perfomance, please disable AutoConnect to UDP devices on the General page. Port - Port + Port Server Addresses (optional) - Server Addresses (optional) + Server Addresses (optional) Remove - Remove + Remove Example: 127.0.0.1:14550 - Example: 127.0.0.1:14550 + Example: 127.0.0.1:14550 Add Server - Add Server + Add Server @@ -18072,52 +17872,52 @@ ROTATION_NONE indicates component points in direction of flight. Measurement Units - Measurement Units + Measurement Units Horizontal Distance - Horizontal Distance + Horizontal Distance Vertical Distance - Vertical Distance + Vertical Distance Area - Area + Area Speed - Speed + Speed Temperature - Temperature + Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. - Choose the measurement units you want to use. You can also change it later in General Settings. + Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units - System of units + System of units - + Metric System - Metric System + Metric System - + Imperial System - Imperial System + Imperial System @@ -18235,82 +18035,82 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Initial Checks - VTOL Initial Checks + VTOL Initial Checks Hardware - Hardware + Hardware Props mounted? Wings secured? Tail secured? - Props mounted? Wings secured? Tail secured? + Props mounted? Wings secured? Tail secured? Please arm the vehicle here - Please arm the vehicle here + Please arm the vehicle here Actuators - Actuators + Actuators Move all control surfaces. Did they work properly? - Move all control surfaces. Did they work properly? + Move all control surfaces. Did they work properly? Motors - Motors + Motors Propellers free? Then throttle up gently. Working properly? - Propellers free? Then throttle up gently. Working properly? + Propellers free? Then throttle up gently. Working properly? Mission - Mission + Mission Please confirm mission is valid (waypoints valid, no terrain collision). - Please confirm mission is valid (waypoints valid, no terrain collision). + Please confirm mission is valid (waypoints valid, no terrain collision). Last preparations before launch - Last preparations before launch + Last preparations before launch Payload - Payload + Payload Configured and started? Payload lid closed? - Configured and started? Payload lid closed? + Configured and started? Payload lid closed? OK for your platform? Lauching into the wind? - OK for your platform? Lauching into the wind? + OK for your platform? Lauching into the wind? Flight area - Flight area + Flight area Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? @@ -18318,12 +18118,12 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - VTOL Landing + VTOL Landing - + %1 complex item version %2 not supported - %1 complex item version %2 not supported + %1 complex item version %2 not supported @@ -18331,375 +18131,357 @@ ROTATION_NONE indicates component points in direction of flight. Set to vehicle heading - Set to vehicle heading + Set to vehicle heading Set to vehicle location - Set to vehicle location + Set to vehicle location Final approach - Final approach + Final approach Use loiter to altitude - Use loiter to altitude + Use loiter to altitude - - + + Altitude - Altitude + Altitude - + Radius - Radius + Radius - + Loiter clockwise - Loiter clockwise + Loiter clockwise - + Landing point - Landing point + Landing point - + Heading - Heading + Heading - + Landing Dist - Landing Dist + Landing Dist - + Altitudes relative to launch - Altitudes relative to launch + Altitudes relative to launch - + Camera - Camera + Camera - + * Actual flight path will vary. - * Actual flight path will vary. + * Actual flight path will vary. - + * Avoid tailwind on approach to land. - * Avoid tailwind on approach to land. + * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. - * Ensure landing distance is enough to complete transition. + * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. - Click in map to set landing point. + Click in map to set landing point. - + - or - - - or - + - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done - Done + Done VTOLLandingPatternMapVisual - + Loiter - Loiter + Loiter - + Approach - Approach + Approach - + Land - Land - - - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor + Land Vehicle - + Mission transfer failed. Error: %1 - Mission transfer failed. Error: %1 + Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 - GeoFence transfer failed. Error: %1 + GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 - Rally Point transfer failed. Error: %1 + Rally Point transfer failed. Error: %1 - + battery %1 level low - battery %1 level low + battery %1 level low - + battery %1 level is critical - battery %1 level is critical + battery %1 level is critical - + battery %1 level emergency - battery %1 level emergency + battery %1 level emergency - + battery %1 failed - battery %1 failed + battery %1 failed - + battery %1 unhealthy - battery %1 unhealthy + battery %1 unhealthy - + warning - warning + warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 - Vehicle %1 + Vehicle %1 - + Vehicle reboot failed. - Vehicle reboot failed. + Vehicle reboot failed. - + %1 %2 flight mode - %1 %2 flight mode + %1 %2 flight mode - + armed - armed + armed - + disarmed - disarmed + disarmed + + + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. - + Unable to send command: %1. - Unable to send command: %1. + Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported - Internal error - MAV_COMP_ID_ALL not supported + Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. - Waiting on previous response to same command. + Waiting on previous response to same command. - + Vehicle did not respond to command: %1 - Vehicle did not respond to command: %1 + Vehicle did not respond to command: %1 - + Bootloader flash succeeded - Bootloader flash succeeded + Bootloader flash succeeded - + %1 command temporarily rejected - %1 command temporarily rejected + %1 command temporarily rejected - + %1 command denied - %1 command denied + %1 command denied - + %1 command not supported - %1 command not supported + %1 command not supported - + %1 command failed - %1 command failed + %1 command failed Vehicle Class - + Airship - Airship + Airship - + Fixed Wing - Fixed Wing + Fixed Wing - + Rover-Boat - Rover-Boat + Rover-Boat - + Sub - Sub + Sub - + Multi-Rotor - Multi-Rotor + Multi-Rotor - + VTOL - VTOL + VTOL - + Generic - Generic + Generic - + Unknown - Unknown + Unknown VehicleLinkManager - + %1Communication regained on %2 link - %1Communication regained on %2 link + %1Communication regained on %2 link - - + + primary - primary + primary - - + + secondary - secondary + secondary - + %1Communication regained - %1Communication regained + %1Communication regained - + %1Switching communication to new primary link - %1Switching communication to new primary link + %1Switching communication to new primary link - + %1Communication lost on %2 link. - %1Communication lost on %2 link. + %1Communication lost on %2 link. - + %1Switching communication to secondary link. - %1Switching communication to secondary link. + %1Switching communication to secondary link. - + %1Communication lost - %1Communication lost + %1Communication lost - + Comm Lost - Comm Lost + Comm Lost @@ -18707,7 +18489,7 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle %1 - Vehicle %1 + Vehicle %1 @@ -18715,17 +18497,17 @@ ROTATION_NONE indicates component points in direction of flight. Hold Still - Hold Still + Hold Still Completed - Completed + Completed Incomplete - Incomplete + Incomplete @@ -18733,12 +18515,12 @@ ROTATION_NONE indicates component points in direction of flight. Below you will find a summary of the settings for your vehicle. To the left are the setup menus for each component. - Below you will find a summary of the settings for your vehicle. To the left are the setup menus for each component. + Below you will find a summary of the settings for your vehicle. To the left are the setup menus for each component. WARNING: Your vehicle requires setup prior to flight. Please resolve the items marked in red using the menu on the left. - WARNING: Your vehicle requires setup prior to flight. Please resolve the items marked in red using the menu on the left. + WARNING: Your vehicle requires setup prior to flight. Please resolve the items marked in red using the menu on the left. @@ -18746,12 +18528,12 @@ ROTATION_NONE indicates component points in direction of flight. No GPS Lock for Vehicle - No GPS Lock for Vehicle + No GPS Lock for Vehicle The vehicle has failed a pre-arm check. In order to arm the vehicle, resolve the failure. - The vehicle has failed a pre-arm check. In order to arm the vehicle, resolve the failure. + The vehicle has failed a pre-arm check. In order to arm the vehicle, resolve the failure. @@ -18759,7 +18541,7 @@ ROTATION_NONE indicates component points in direction of flight. Analyze vibration associated with your vehicle. - Analyze vibration associated with your vehicle. + Analyze vibration associated with your vehicle. @@ -18794,33 +18576,28 @@ ROTATION_NONE indicates component points in direction of flight. Clip count - Clip count + Clip count Not Available - Not Available + Not Available VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. - Invalid video format defined. + Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. - Unabled to record video. Video save path must be specified in Settings. + Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available - No Video Available + No Video Available - + Video Stream Disabled - Video Stream Disabled + Video Stream Disabled - + RTSP Video Stream - RTSP Video Stream + RTSP Video Stream - + UDP h.264 Video Stream - UDP h.264 Video Stream + UDP h.264 Video Stream - + UDP h.265 Video Stream - UDP h.265 Video Stream + UDP h.265 Video Stream - + TCP-MPEG2 Video Stream - TCP-MPEG2 Video Stream + TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream - MPEG-TS (h.264) Video Stream + MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) - 3DR Solo (requires restart) + 3DR Solo (requires restart) - + Parrot Discovery - Parrot Discovery + Parrot Discovery - + Yuneec Mantis G - Yuneec Mantis G + Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_uk_UA.ts b/translations/qgc_source_uk_UA.ts index 235f77c0fae..c040f831cbc 100644 --- a/translations/qgc_source_uk_UA.ts +++ b/translations/qgc_source_uk_UA.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_zh_CN.ts b/translations/qgc_source_zh_CN.ts index f7653dd6f91..d0fbc05fc33 100644 --- a/translations/qgc_source_zh_CN.ts +++ b/translations/qgc_source_zh_CN.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB 服务器错误： %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 警告！您正在使用的飞控板有一个紧急的不建议飞行的警告，详情请见： https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Solo视频链路设置时出错：%1 - + Unable to change altitude, vehicle altitude not known. 无法改变高度，飞行器的高度未知。 - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff 飞行器不支持引导模式下起飞 - + Unable to takeoff, vehicle position not known. 无法起飞，飞行器位置未知。 - + Unable to takeoff: Vehicle failed to change to Guided mode. 无法起飞：飞行器无法进入引导模式。 - + Unable to takeoff: Vehicle failed to arm. 无法起飞：飞行器解锁失败。 - - + + Unable to start mission: Vehicle failed to change to Auto mode. 无法开始任务：飞行器进入自动模式失败。 - + Unable to start mission: Vehicle failed to change to Guided mode. 无法开始任务：飞行器进入引导模式失败。 - + Unable to start mission: Vehicle failed to arm. 无法开始任务：飞行器解锁失败。 - - - Follow failed: Home position not set. - 跟随失败：未设置起始点。 - - - - Follow failed: Ground station cannot provide required position information. - 跟随失败：地面站无法提供所需位置信息。 - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - 跟随模式 + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - 跟随模式设定提供载具跟随地面站的位置的详细配置 + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - 电池1监控器 + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - 电池1电量 + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - 电池2监控器 + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - 电池2电量 + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1857,25 +1889,25 @@ - + - + Return to Launch 返航 - + - + Return at current altitude 维持当前高度返航 - + - + Return at specified altitude: 爬升到特定高度返航 @@ -1898,14 +1930,14 @@ 最终降落阶段下降速度 - - + + Arming Checks 解锁检查 - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. 警告：关闭解锁检查有可能导致飞机失控 @@ -2080,42 +2112,42 @@ APMSafetyComponentPlane - + Failsafe Triggers 故障保护触发器 - + Throttle PWM threshold: 油门PWM阈值： - + Voltage threshold: 电压阈值： - + MAH threshold: 电量阈值： - + GCS failsafe 地面站故障保护 - + Return to Launch 返航 - + Return at current altitude 维持当前高度返航 - + Return at specified altitude: 爬升到特定高度返航 @@ -2510,34 +2542,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: 油门故障保护： - - - + + + Disabled 失效 - + Voltage failsafe: 电压故障保护： - + mAh failsafe: 电能故障保护： - + RTL min alt: 返航最小高度： - + current 电流 @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4061,14 +4101,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th 自定义固件. 版本. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4138,7 +4170,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 打开控制台日志输出文件失败 %1 : %2 @@ -4156,17 +4188,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: 搜索： - + Clear 清除 - + Clear All 清除全部 @@ -4244,342 +4276,706 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - 已解锁 + + Stabilize + Stabilize - - Disarmed - 未解锁 + + Acro + Acro - - Arm - 电机解锁 + + Altitude Hold + Altitude Hold - - Disarm - 电机上锁 + + Auto + Auto - - - AudioOutput - - negative - 负数 + + Guided + Guided - - point - 点 + + Loiter + Loiter - - meters - 米 + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - 一个或多个飞机组件需要在飞行前设置。 + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - 未抓取 + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - 充电状态 + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - 电压 + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - 温度 + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings - 蓝牙连接设置 + + Manual + Manual - - Bluetooth Not Available - 蓝牙不可用 + + Acro + Acro - - - BluetoothLink - - Bluetooth Link Error - 蓝牙连接错误 + + Learning + Learning - - - BluetoothSettings - - Device + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + 已解锁 + + + + Disarmed + 未解锁 + + + + Arm + 电机解锁 + + + + Disarm + 电机上锁 + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + 一个或多个飞机组件需要在飞行前设置。 + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + 未抓取 + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + 充电状态 + + + + + Remaining + Remaining + + + + Voltage + 电压 + + + + Consumed + Consumed + + + + Temperature + 温度 + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings + 蓝牙连接设置 + + + + Bluetooth Not Available + 蓝牙不可用 + + + + BluetoothLink + + + Bluetooth Link Error + 蓝牙连接错误 + + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + + + + BluetoothSettings + + + Device Device @@ -4603,6 +4999,34 @@ Click Ok to start the auto-tuning process. 停止 + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4783,27 +5207,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width 宽 - + Height 高 - + Sensor 传感器 - + Image 图像 - + Focal length 焦距 @@ -4811,27 +5235,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap 航向重叠 - + Side Lap 侧向重叠 - + Overlap 重叠度 - + Select one: 选择一项 - + Grnd Res 地面分辨率 @@ -5093,7 +5517,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5101,13 +5525,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. 该模式不支持预设 - + '%1' is a built-in preset which cannot be deleted. ‘%1’ 是一个内置预设，不能删除。 @@ -5176,18 +5600,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5557,14 +5981,6 @@ Click Ok to start the auto-tuning process. 军事格网参考系 - - ExitWithErrorWindow - - - Close - 关闭 - - FTPManager @@ -5618,53 +6034,58 @@ Click Ok to start the auto-tuning process. 设置为飞机位置 - - + + Altitude 高度 - + + Flight Speed + Flight Speed + + + Radius 半径 - + Loiter clockwise 顺时针盘旋 - + Landing point 着陆点 - + Heading 航向 - + Glide Slope 滑行坡度 - + Altitudes relative to launch 相对发射高度 - + Drag the loiter point to adjust landing direction for wind and obstacles. 拖动留待点以抵抗风向和障碍物以此调整着陆方向 - + Done 完成 - + Camera 相机 @@ -5679,32 +6100,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. 斜坡的大概高度 - + * Actual flight path will vary. * 实际飞行路径将有所不同。 - + * Avoid tailwind on landing. * 在着陆时避免尾风。 - + Click in map to set landing point. 点击地图以设置着陆点。 - + - or - -或者- @@ -5712,22 +6133,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter 悬停模式 - + Approach Approach - + Landing Area 着陆区 - + Glide Slope 滑行坡度 @@ -5795,23 +6216,10 @@ Click Ok to start the auto-tuning process. 无效数字 - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - 无效值 - - - + Value Details 详细信息 @@ -5868,22 +6276,22 @@ Click Ok to start the auto-tuning process. Firmware Class - + PX4 Pro PX4 Pro - + ArduPilot ArduPilot - + Generic Generic - + Unknown 未知 @@ -5993,376 +6401,8 @@ Click Ok to start the auto-tuning process. FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - 佳能 S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - 佳能 EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - 佳能 G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - 佳能 SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - 理光 GR II - - - - - - - Sentera - Sentera - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera 双4K 传感器 - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI 单传感器 - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - 索尼 a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 - - - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 - - - - a7r III 35mm - a7r III 35mm - - - - a7r IV 35mm - a7r IV 35mm - - - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 - - - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 - - - - DSC-RX0 - DSC-RX0 - - - - Sony DSC-RX0 - 索尼 DSC-RX0 - - - - DSC-RX1R II 35mm - DSC-RX1R II 35mm - - - - ILCE-QX1 - ILCE-QX1 - - - - Sony ILCE-QX1 - 索尼 ILCE-QX1 - - - - NEX-5R 20mm - NEX-5R 20mm - - - - Sony NEX-5R 20mm - 索尼 NEX-5R 20mm - - - - RX100 II 28mm - RX100 II 28mm - - - - Sony RX100 II 28mm - 索尼 RX100 II 28mm - - - - - - - Yuneec - Yuneec - - - - CGOET - CGOET - - - - Yuneec CGOET - Yuneec CGOET - - - - E10T - E10T - - - - Yuneec E10T - Yuneec E10T - - - - E50 - E50 - - - - Yuneec E50 - Yuneec E50 - - - - E90 - E90 - - - - Yuneec E90 - Yuneec E90 - - - - - Flir - Flir - - - - Duo R - Duo R - - - - Flir Duo R - Flir Duo R - - - - Duo Pro R - Duo Pro R - - - - - Workswell - Workswell - - - - - Wiris Security - Wiris Security - - - Vehicle is not running latest stable firmware! Running %1, latest stable is %2. 模型没有运行最新的稳定固件！运行 %1，最新稳定是 %2。 @@ -6380,11 +6420,6 @@ Click Ok to start the auto-tuning process. Firmware Setup 固件设置 - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 可以升级 Pixhawk 设备、SiK数传和 PX4 光流传感器上的固件。 - Update the autopilot firmware to the latest version @@ -6396,7 +6431,7 @@ Click Ok to start the auto-tuning process. 所有与飞机的 %1 连接都必须 - + Upgrade cancelled 升级已取消 @@ -6405,6 +6440,11 @@ Click Ok to start the auto-tuning process. Select Firmware File 选择固件文件 + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6491,162 +6531,144 @@ Click Ok to start the auto-tuning process. 发现设备 - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) 标准版（stable） - + Beta Testing (beta) Beta测试（beta） - + Developer Build (master) 开发者编译（master） - - - + + Custom firmware file... 自定义固件文件... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version 标准版 - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - 检测到 PX4 Flow 光流板。在 PX4 Flow 上使用的固件必须与你飞机上使用的飞控固件类型相匹配： - - - + Detected Pixhawk board. You can select from the following flight stacks: 检测到 Pixhawk 飞控板。您可以从以下飞行栈中进行选择： - + Press Ok to upgrade your vehicle. 按“确定”升级您的飞机。 - + Downloading list of available firmwares... 正在下载可用固件列表... - + No Firmware Available 没有可用的固件 - + Advanced settings 高级设置 - + Select the standard version or one from the file system (previously downloaded): 选择标准版本或者从（之前下载好的）文件系统中选择一个： - - Select which version of the firmware you would like to install: - 请选择要安装的固件版本: - - - + Select which version of the above flight stack you would like to install: 请在上方选择要安装的飞行栈版本: - + WARNING: BETA FIRMWARE. 警告：BETA 固件。 - + This firmware version is ONLY intended for beta testers. 此固件版本仅适用于 beta 测试人员！ - + Although it has received FLIGHT TESTING, it represents actively changed code. 尽管接受了飞行测试，但代码仍然变动非常活跃。 - + Do NOT use for normal operation. 不可用于一般操作！ - + WARNING: CONTINUOUS BUILD FIRMWARE. 警告：连续编译固件。 - + This firmware has NOT BEEN FLIGHT TESTED. 这个固件“未经飞行测试”！ - + It is only intended for DEVELOPERS. 它只针对开发人员！ - + Run bench tests without props first. 首先请不要安装桨，进行台架试验。 - + Do NOT fly this without additional safety precautions. 不要在没有额外安全措施的情况下飞行。 - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader 刷写 ChibiOS Bootloader @@ -6654,87 +6676,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. 固件升级时不充许连接。 - + Connected to bootloader: 已连接上启动加载器： - + Version: %1 版本： %1 - + Board ID: %1 飞控板ID：%1 - + Flash size: %1 闪存大小： %1 - + Custom firmware selected but no filename given. 自定义固件已选，但没有给出文件名。 - + Unable to find specified firmware for board type 无法找到板块类型指定的固件 - + No firmware file selected 没有选中固件文件 - + Downloading firmware... 正在下载固件... - + From: %1 来自： %1 - + Download complete 下载完成 - + Image load failed 镜像载入失败 - + Bootloader not found 找不到 Bootloader - + Image size of %1 is too large for board flash size %2 镜像体积 %1 太大，无法装到 %2 的飞控板的闪存上 - + Upgrade complete 升级完成 - + Upgrade cancelled 升级已取消 - + Choose board type 选择板块类型 @@ -6835,7 +6857,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported 版本 %2 不支持 %1 复杂项目 @@ -6843,12 +6865,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO 等待视频中 - + VIDEO DISABLED 视频已禁用 @@ -6861,15 +6883,6 @@ Click Ok to start the auto-tuning process. 指定位置 - - FlightModeDropdown - - - N/A - No data to display - 无 - - FlightModeIndicator @@ -7024,26 +7037,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7097,153 +7115,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7314,113 +7332,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7428,7 +7464,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units 单位 @@ -7443,39 +7479,39 @@ Click Ok to start the auto-tuning process. 配色方案 - + Stream GCS Position 流动地面站位置 - + Mute all audio output 使所有音频输出静音 - + Clear all settings on next start 下次使用前清除所有数据 - + Application Load/Save Path 应用程序加载/保存路径 - - - + + + Browse 浏览 - + Choose the location to save/load files 选择保存/加载文件的位置 - + UI Scaling 界面缩放 @@ -7485,43 +7521,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image 品牌图像 - + Indoor Image 室内图像 - - + + Choose custom brand image file 选择自定义品牌图像文件 - + Outdoor Image 室外图像 - + Reset Images Reset Images - + Reset Reset @@ -7529,17 +7565,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 地理围栏支持版本 %1 - + GeoFence polygon not stored as object 多边形围栏没有作为对象存储 - + GeoFence circle not stored as object 圆形围栏没有作为对象存储 @@ -7677,27 +7713,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - 图像已标记。现有图像将被删除。 + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. 保存文件夹已经包含图像。 - + Cannot find the image directory. 找不到图像存储目录 - + Couldn't replace the previously tagged images 无法替换以前标记的图像 - + Cannot find the save directory. 找不到存诸目录 @@ -7705,39 +7759,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file 选择日志文件 - + ULog file (*.ulg) 日志文件(*.ulg) - + PX4 log file (*.px4log) PX4 日志文件 (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory 选择镜像目录 - + (Optionally) Select save directory （可选）选择保存目录 @@ -7747,22 +7801,22 @@ Click Ok to start the auto-tuning process. 选择存诸目录 - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging 取消标记 - + Start Tagging 开始标记 @@ -7770,192 +7824,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format 图像目录并没有包含图像，请确保你的图像是 JPG 格式 - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. 地理标注失败。无法打开图像。 - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled 标记已取消 - + Geotagging failed. Couldn't open log file. 地理标注失败。无法打开日志文件。 - - %1 - tagging cancelled - %1 - 标记已取消 - - - + Log parsing failed 日志解析失败 - - Geotagging failed in trigger filtering - 地理标注在触发过滤时失败 - - - + Geotagging failed. Requesting image #%1, but only %2 images present. 地理标签失败。正在请求图像文件 %1，但仅有 %2 图片文件。 - - - Geotagging failed. Couldn't write to image. - 地理标注失败。无法写入图像。 - - - - Geotagging failed. Couldn't write to an image. - 地理标注失败。无法写入图像。 - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8069,7 +8130,7 @@ Click Ok to start the auto-tuning process. 前往位置 - + Return to the launch position of the vehicle. 让飞机回到起飞点。 @@ -8124,162 +8185,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. 解锁飞机 - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle 飞机加锁 - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. 警告：这将使所有电机停转！如果飞行器当前正在空中将会导致坠毁！ - + Takeoff from ground and hold position. 从地面起飞并保持位置。 - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. 从地面起飞并开始当前任务。 - + Continue the mission from the current waypoint. 从当前航点继续任务。 - + Upload of resume mission failed. Confirm to retry upload 上传恢复任务失败。点确认重试上传 - + Land the vehicle at the current position. 将飞机降落在当前位置。 - + Change the altitude of the vehicle up or down. 将飞机的高度升高或降低。 - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. 将飞机移动到指定位置。 - + Adjust current waypoint to %1. 将当前航点调整为 %1。 - + Orbit the vehicle around the specified location. 使飞机绕着指定位置盘旋。 - + Abort the landing sequence. 中止着陆过程。 - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. 将飞机停在它的当前位置，根据需要上下调整高度。 - + Pause all vehicles at their current position. 在当前位置暂停所有飞机。 - + Transition VTOL to fixed wing flight. VTOL切换到固定翼飞行模式。 - + Transition VTOL to multi-rotor flight. VTOL切换到多旋翼飞行模式。 - + Make the specified location a Region Of Interest. 使指定位置成为感兴趣的区域。 - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL 智能 RTL - + Internal error: unknown actionCode 内部错误：未知的动作代码 @@ -8319,13 +8390,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8333,99 +8404,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None 无 - + Color 颜色 - + Opacity 不透明度 - + Icon 图标 InstrumentValueEditDialog - - - Value Display - 数值显示 - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon 图标 - + Text 文本 - + + + Label 标签 - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size 大小 - + Show Units 显示单位 - - Range - 范围 + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - 指定您想要根据值范围应用的颜色。 如果可用，颜色将应用于图标，否则将应用于值本身。 + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + 指定您想要根据值范围应用的颜色。 如果可用，颜色将应用于图标，否则将应用于值本身。 - - - + + + Add Row 添加行 - + Specify the icon you want to display based on value ranges. 根据值范围指定要显示的图标。 - + Specify the icon opacity you want based on value ranges. 根据值范围指定要显示的图标。 - + Select Icon 选择图标 @@ -8441,153 +8532,153 @@ Click Ok to start the auto-tuning process. Joystick - + No Action 无操作 - + Arm 解锁 - + Disarm 加锁 - + Toggle Arm 切换锁定 - + VTOL: Fixed Wing VTOL：固定翼 - + VTOL: Multi-Rotor VTOL：多旋翼 - + Continuous Zoom In 连续缩放 - + Continuous Zoom Out 连续缩放 - + Step Zoom In 步骤缩放 - + Step Zoom Out 逐步缩小 - + Trigger Camera 触发相机 - + Start Recording Video 开始录制视频 - + Stop Recording Video 停止录制视频 - + Toggle Recording Video 切换录制视频 - + Gimbal Down 云台向下 - + Gimbal Up 云台向上 - + Gimbal Left 云台向左 - + Gimbal Right 云台向右 - + Gimbal Center 云台居中 - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop 紧急停止 - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream 下一个视频流 - + Previous Video Stream 上一个视频流 - + Next Camera 下一个相机 - + Previous Camera 上一个相机 @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. 检测到 %1 轴游戏手柄。要操作 PX4，至少需要 %2 轴。 @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status 游戏手柄状态 - + Connected: 已连接： - - + + Yes Yes - - + + No No - + Enabled: 已启用： @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 不允许连接：%1 - - - - + + + %1 on %2 (AutoConnect) %2上的%1（自动连接） - + Shutdown 关机 - + Serial 串口 - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link 模拟链接 - + AirLink AirLink - - + + Log Replay 日志回放 @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add 添加 - + Connect 连接 @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect 断开连接 - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start 开始时自动连接 - + High Latency 高延迟 - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available 可用 - - + Canceled 已取消 - - - + + Error 错误 - + Downloaded 已下载 - - Timed Out - 已超时 - - - + Waiting 等待中 - - - UnknownDate - 未知日期 - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. 日志下载功能，可以让你从飞机上下载二进制日志文件。点击刷新查看可用日志列表。 - + Id ID - + Date 日期 - + Date Unknown 日期未知 - + Size 大小 - + Status 状态 - + Refresh 刷新 - + Log Refresh 日志刷新 - + You must be connected to a vehicle in order to download logs. 您必须先连接飞机才能下载日志。 - + Download 下载 - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory 选择存诸目录 - + Erase All 擦除全部 - + Delete All Log Files 删除所有日志文件 - + All log files will be erased permanently. Is this really what you want? 所有日志文件将被永久擦除。您确定要继续执行吗？ - + Cancel 取消 - LogReplayLink - - - Log Replay Error - 日志回放错误 - - - - You must close all connections prior to replaying a log. - 回放日志前必须关闭所有连接。 - - - - Attempt to load new log while log being played - 尝试在回放日志时加载新日志 - - - - Unable to open log file: '%1', error: %2 - 无法打开日志文件：“%1”，错误：%2 - - - - The log file '%1' is corrupt or empty. - 日志文件 ’%1‘ 已损坏或为空。 - - - - Connect not allowed during Flight Data replay. - 在飞行数据回放期间不允许连接。 - - - - - Unable to seek to new position - 无法找到新位置 - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings - 日志回放连接设置 + Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2米：%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse 浏览 - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. 所有文件 (*) - + Pause 暂停 - + Play 播放 - + Load Telemetry Log 加载数传日志文件 - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 秒 - + 10 Sec 10 秒 - + 30 Sec 30 秒 - + 60 Sec 60 秒 - + Auto 自动 - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9802,114 +9910,101 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLINK 协议 - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink 日志记录失败。无法写入文件%1，已禁用日志记录。 - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - 在启用了 MAVLink v2.0 的连接上，检测到数传仍在使用 MAVLink v1.0。请升级数传固件。 + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink 协议 + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - 打开用于写入的飞行数据文件失败。无法写入 %1。请选择其他文件位置。 + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? 仍存在与飞机的有效连接。确实要退出吗？ - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? 您正在进行任务编辑，但尚未保存/发送。 如果您关闭，将失去当前修改。 确定要关闭吗？ - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? 模型更新参数里存在待定值。如果你关闭将丢失更改。你确定要关闭吗？ - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10061,37 +10156,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10124,17 +10214,12 @@ Click Ok to start the auto-tuning process. 英尺 - - T - T - - - + + + - + - - @@ -10142,162 +10227,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10331,7 +10421,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands 所有命令 @@ -10397,43 +10487,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position 移动到飞机位置 - + Move to previous item position 移动到上一个项目位置 - + Edit position... 编辑位置... - + Show all values 显示所有值 - + Mission Edit 任务编辑 - + You have made changes to the mission item which cannot be shown in Simple Mode 您已经对某些任务项目进行了修改，它们无法在简单模式下显示。 - + Item #%1 项目 1 @@ -10449,7 +10539,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. 由于 MAV_CMD_DO_JUMP 命令，无法生成恢复任务。 @@ -10600,19 +10690,6 @@ Click Ok to start the auto-tuning process. 模拟连接设置 - - ModeSwitchDisplay - - - Monitor: - 监视器： - - - - Threshold: - 阈值： - - MotorAssignment @@ -10738,440 +10815,115 @@ Do you wish to proceed? 螺旋桨周围是否有足够的空间？轻推油门，观察是否一切正常？ - - Mission - 任务 - - - - Please confirm mission is valid (waypoints valid, no terrain collision). - 请确认飞行任务是否可用（航点有效，没有地形障碍）。 - - - - Last preparations before launch - 起飞前的最后准备工作 - - - - Payload - 有效荷载 - - - - Configured and started? Payload lid closed? - 已配置并已启动？载荷舱盖是否已关闭？ - - - - Wind & weather - 风力和天气信息 - - - - OK for your platform? - 确定您的平台？ - - - - Flight area - 飞行区域 - - - - Launch area and path free of obstacles/people? - 起飞场地和飞行路径上有没有人或障碍物？ - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - 以下命令将应用于所有飞机 - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - 已解锁 - - - - Disarmed - 未解锁 - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - 警告：已经有一架飞机用了同样的系统ID %1：%2 - - - - Connected to Vehicle %1 - 已连接到载具 %1 - - - - MultiVehicleSelector - - - Vehicle - 飞机 - - - - OfflineMap - - - Error Message - 错误信息 - - - - Max Cache Disk Size (MB): - 最大硬盘缓存大小（MB）： - - - - Max Cache Memory Size (MB): - 最大缓存大小（MB）： - - - - Memory cache changes require a restart to take effect. - 缓存更改后需要重启生效。 - - - - Mapbox Access Token - Mapbox 访问 Token - - - - To enable Mapbox maps, enter your access token. - 要启用 Mapbox 地图，请输入您的访问口令。 - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri 访问 Token - - - - To enable Esri maps, enter your access token. - 要启用 Esri 地图，请输入您的访问口令。 - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - 这将删除所有图块，这包含你自己创建的那些图块集。 - -你确定要这么做吗？ - - - - Delete %1 and all its tiles. - -Is this really what you want? - 删除%1和所有相关图块。 - -你确定要这么做吗？ - - - - System Wide Tile Cache - 系统图块缓存 - - - - Zoom Levels: - 缩放级别： - - - - Total: - 总计： - - - - Unique: - 唯一： - - - - Downloaded: - 已下载： - - - - Error Count: - 错误计数： - - - - Size: - 占用空间： - - - - - Tile Count: - 图块数量： - - - - Resume Download - 恢复下载 - - - - Cancel Download - 取消下载 - - - - Delete - 删除 - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - 确认删除 - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - 确定 - - - - - - Close - 关闭 - - - - - - - Cancel - 取消 - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - 最小缩放：%1 - - - - Max Zoom: %1 - 最大缩放：%1 - - - - - Add New Set - 增加新设置 - - - - Name: - 名称： + + Mission + 任务 - - Map type: - 地图类型： + + Please confirm mission is valid (waypoints valid, no terrain collision). + 请确认飞行任务是否可用（航点有效，没有地形障碍）。 - - Fetch elevation data - 获取高程数据 + + Last preparations before launch + 起飞前的最后准备工作 - - Min/Max Zoom Levels - 最小/最大缩放级别 + + Payload + 有效荷载 - - Est Size: - 占用空间： + + Configured and started? Payload lid closed? + 已配置并已启动？载荷舱盖是否已关闭？ - - Too many tiles - 图块过多 + + Wind & weather + 风力和天气信息 - - Download - 下载 + + OK for your platform? + 确定您的平台？ - - - Import - 导入 + + Flight area + 飞行区域 - - - Export - 导出 + + Launch area and path free of obstacles/people? + 起飞场地和飞行路径上有没有人或障碍物？ + + + MultiVehicleList - - Options - 选项 + + The following commands will be applied to all vehicles + 以下命令将应用于所有飞机 - - Offline Maps Options - 离线地图选项 + + + Pause + Pause - - Select Tile Sets to Export - 选择要导出的图块集 + + + Start Mission + Start Mission - - Select All - 全部选择 + + Armed + 已解锁 - - Select None - 全部不选 + + Disarmed + 未解锁 - - Export Tile Set - 导出图块集 + + Arm + Arm - - Tile Set Export Progress - 图块集导出进度 + + RTL + RTL - - Tile Set Export Completed - 图块集导出完成 + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - 地图图块集导入 + + Warning: A vehicle is using the same system id as %1: %2 + 警告：已经有一架飞机用了同样的系统ID %1：%2 - - Append to existing set - 添加到当前集 + + Connected to Vehicle %1 + 已连接到载具 %1 + + + MultiVehicleSelector - - Replace existing set - 替换当前集 + + Vehicle + 飞机 @@ -11363,6 +11115,14 @@ Is this really what you want? 飞机 + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11443,29 +11203,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11560,47 +11320,52 @@ Is this really what you want? 轨道 - + Unknown %1:%2 未知 %1:%2 - + Unable to takeoff, vehicle position not known. 无法起飞，飞行器位置未知。 - + Unable to go to location, vehicle position not known. 无法到达指定位置，飞机位置未知。 - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. 无法改变高度，Home点未知。 - + Unable to change altitude, home position altitude unknown. 无法改变高度，Home点的高度未知。 - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. 无法开始任务：飞机拒绝解锁。 - + Unable to start mission: Vehicle not changing to %1 flight mode. 无法启动飞行任务：航模没有更改为 %1 飞行模式。 - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl 支持 PX4 Pro 固件 %1.%2.%3 及以上版本。您正使用之前的版本，这将导致不可预知的结果。请升级固件。 @@ -11729,269 +11494,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow 光流摄像头 + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -12000,18 +11737,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12761,78 +12498,78 @@ Is this really what you want? ParameterEditor - - Search: - 搜索： - - - + Clear 清除 - + Show modified only 只显示修改 - + Tools 工具 - + Refresh 刷新 - + Reset all to firmware's defaults 全部重置为固件's 默认值 - - + + Reset All 全部重置 - + Reset to vehicle's configuration defaults 重置为载具'的配置默认值 - + Load from file... 加载文件...... - + Load Parameters 加载参数 - + Save to file... 保存到文件...... - + Save Parameters 保存参数 - + Clear all RC to Param 清除遥控调整参数 - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12841,23 +12578,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle 重启飞行器 - + Parameter Files (*.%1) 参数文件 (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. 选择重置以将所有参数重置为载具's 配置默认值。 - + Select Ok to reboot vehicle. 点击“确定”重新启动飞机。 @@ -12865,12 +12602,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 无法创建文件：%1 - + Unable to open file: %1 无法打开文件：%1 @@ -12878,72 +12615,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: 最小： - + Max: 最大： - + Default: 默认： - - Parameter name: - 参数名称： + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. 警告：在飞机飞行时修改值可能导致飞机不稳定，也可能造成飞机飞丢。 - + Make sure you know what you are doing and double-check your values before Save! 确保你知道你在做什么，并在保存之前仔细检查你设置的值！ - + Force save (dangerous!) 强制保存（危险！） - + Advanced settings 高级设置 - + Manual Entry 手动输入 - + Set RC to Param 将遥控设到参数... @@ -12951,39 +12683,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 参数写入失败：飞机：%1 组件：%2 参数：%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 参数读取失败：飞机：%1 组件：%2 参数：%3 - + Parameter cache CRC match failed 参数缓存 CRC 匹配失败 - + Parameters not loaded since they are not currently on the vehicle: %1 参数未加载，因为它们目前不在模型上： %1 - + Parameters not loaded due to type mismatch: %1 由于类型不匹配而未加载参数： %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 无法从飞机%2检索完整的参数集。这将导致%1无法显示其完整的用户界面。如果使用的是修改后的固件，则可能需要解决所有飞机启动错误以解决此问题。如果使用的是标准固件，则可能需要升级到较新的版本来解决此问题。 - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. 飞机%1未响应对参数的请求。这将导致 %2 无法显示其完整的用户界面。 @@ -13129,178 +12861,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone 任务项通信期间发生内部错误：_ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. 任务请求列表失败，超过了最大重试次数。 - + Retrying %1 REQUEST_LIST retry Count 正在重试 %1 REQUEST_LIST 重试计数 - + Mission read failed, maximum retries exceeded. 任务读取失败，超过了最大重试次数。 - + Retrying %1 MISSION_REQUEST retry Count 正在重试 %1 MISSION_REQUEST 重试计数 - + Mission write failed, vehicle failed to send final ack. 任务写入失败，飞机发送最终确认信息失败。 - + Mission write mission count failed, maximum retries exceeded. 任务写任务计数失败，超过了最大重试次数。 - + Vehicle did not request all items from ground station: %1 飞机未从地面站请求所有项目：%1 - + Mission remove all, maximum retries exceeded. 任务全部删除，超过最大重试次数。 - + Retrying %1 MISSION_CLEAR_ALL retry Count 正在重试 %1 MISSION_CLEAR_ALL 重试计数 - + Vehicle did not respond to mission item communication: %1 飞机未响应任务项目通信：%1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read 内部错误：呼叫车辆_requestNextMission项目没有更多要阅读的索引 - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. 飞机请求的项目超出范围，计数：请求 %1:%2。发送到飞机失败。 - + Vehicle remove all failed. Error: %1 车辆移除所有失败。错误： %1 - + Item #%1 Command: %2 项目 #%1 命令: %2 - + Frame: %1 框架1 - - - - - - - + + + + + + + Value: %1 值: %1% - + Mission accepted. 任務已接 - + Unspecified error. 未知错误。 - + Coordinate frame is not supported. 不支持坐标系。 - + Command is not supported. 不支持该命令 - + Mission item exceeds storage space. 任务项超出存储空间。 - + One of the parameters has an invalid value. 其中一个参数有一个无效值。 - + Param 1 invalid value. 参数 1 无效值。 - + Param 2 invalid value. 参数 2 无效值。 - + Param 3 invalid value. 参数 3 无效值。 - + Param 4 invalid value. 参数 4 无效值。 - + Param 5 invalid value. 参数 5 值无效。 - + Param 6 invalid value. 参数6无效值。 - + Param 7 invalid value. 参数7 无效值。 - + Received mission item out of sequence. 收到序列以外的任务项目。 - + Not accepting any mission commands. 不接受任何任务命令。 - + Unknown error: %1. 未知的错误：%1 - + Vehicle returned error: %1. %2Vehicle did not accept guided item. 飞机返回错误：%1。%2飞机未接受引导项目。 @@ -13352,27 +13084,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint 选定的航点 - + Alt diff: 高度差： - + Azimuth: 方位： - + Distance: 距离： - + Gradient: 倾斜度： @@ -13388,47 +13120,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: 航向 - + Total Mission 全局任务 - + Max telem dist: 最远数传距离： - + Time: 时间： - + Battery 电池 - + Batteries required: 电池需求数量： - + Upload Required 上传任务 - + Upload 上传 @@ -13441,122 +13173,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al 飞机当前已解锁。您确认想上传任务到飞机吗？ - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? 您已经更改了任务项的默认高度。希望应用新的高度设置到当前任务的所有航点吗？ - + You need at least one item to create a KML. 您需要至少一个项目来创建KML。 - + Plan is waiting on terrain data from server for correct altitude values. 规划正在等待来自服务器的地形数据，已得到正确的高度值。 - + Plan Upload 任务计划上传 - + Select Plan File 选择任务计划文件 - + Save Plan 保存计划 - + Save KML 保存KML - + File 文件 - + Waypoint 航点 - + ROI 兴趣区域 - + Pattern 图案 - + Center 中心 - + Plan 规划 - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13565,191 +13297,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff 起飞 - + Rally Point 集结点 - + Cancel ROI 取消ROI - + Return 返航|返回 - + Land 着陆 - - + + Mission 任务 - + Fence 围栏 - - + + Rally 集结 - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? 您有未保存/未发送的更改。从飞机进行加载操作将会失去这些变更。确定要从飞机上加载吗？ - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? 您有未保存/未发送的更改。从文件进行加载操作将会失去这些变更。确定要从文件中加载吗？ - - + + Clear 清除 - + Are you sure you want to remove all mission items and clear the mission from the vehicle? 是否确认要删除所有任务项目并清除该飞机上的任务？ - + Create complex pattern: 创建复杂图案： - + You have unsaved changes. 您有未保存的更改。 - + Open... 打开... - - - + + + Save 保存​​ - - + + Unable to %1 无法 %1 - + Plan has incomplete items. Complete all items and %1 again. 计划有不完整的项目。重新完成所有项目和 %1。 - + Are you sure you want to remove current plan and create a new plan? 您确定要删除当前计划并创建一个新计划吗？ - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. 您有未保存的更改，应该将其上传到飞机或保存到一个文件中： - - + + Create Plan 创建计划 - + Storage 存储 - + Save As... 另存为... - + Save Mission Waypoints As KML... 保存路径点为 KML格式 - + KML KML - - - + + + Upload 上传 - + Vehicle 飞机 - + Download 下载 @@ -13795,34 +13517,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - 点击以添加点%1 - - - - - Right Click to end polygon - - 点击右键结束多边形绘制 - - - - Click to add point - 单击此处添加点 - - - - Click to add point - Right Click to end polygon - 点击以添加点 - 右键单击结束多边形绘制 - - - - Adjust polygon by dragging corners - 通过拖动角点来调整多边形 - - PowerComponent @@ -14377,7 +14071,7 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> 当前用户没有访问串行设备的正确权限。您还应该删除调制解调器管理器，因为它也会干扰。 如果您正在使用 Ubuntu， 执行以下命令来解决这些问题： @@ -14385,39 +14079,32 @@ sudo usermod -a -G dialout $USER sudo apt-get 移除调制解调器管理器 - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. %1的格式已被更改。您之前保存的设置已经被重置。 - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - 无法保存遥测日志。复制遥测到”%1“：”%2“时出错。 - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 从固件中缺少参数。 您可能正在运行一个不完全支持的固件版本，或者您的固件里有一个错误。 缺少参数： %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - 无法保存遥测日志。应用程序保存目录未设置。 - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - 无法保存遥测日志。遥测保存目录“%1”不存在。 + + Database Not Initialized + Database Not Initialized @@ -14431,32 +14118,32 @@ sudo apt-get 移除调制解调器管理器 QGCCorePlugin - + Vibration 振动 - + Log Download 日志下载 - + GeoTag Images 地理标记图像 - + MAVLink Console Mavlink 控制台 - + MAVLink Inspector MAVLink 检测 - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? 警告：您即将进入高级模式。如果使用不当，这可能导致您的飞机故障，从而使您的保修作废。只有在客户支持的指导下才能这样做。是否确实要启用高级模式？ @@ -14514,178 +14201,170 @@ sudo apt-get 移除调制解调器管理器 QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 未能保存下载的文件到 %1。错误：%2 - + Download cancelled 下载已取消 - + Error: File Not Found 错误：无法找到文件 - + Error during download. Error: %1 下载过程中出错。错误：%1 - - QGCLogEntry - - - Pending - 挂起 - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14693,24 +14372,16 @@ sudo apt-get 移除调制解调器管理器 QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14839,83 +14510,83 @@ sudo apt-get 移除调制解调器管理器 QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14923,60 +14594,116 @@ sudo apt-get 移除调制解调器管理器 QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 位 - + 64 bit 64 位 - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14984,46 +14711,11 @@ sudo apt-get 移除调制解调器管理器 QObject - - Unknown - 未知 - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK电台 - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. 飞机不支持引导模式。 - - - Follow Me - 跟随Follow Me - The following required keys are missing: %1 @@ -15107,25 +14799,14 @@ sudo apt-get 移除调制解调器管理器 RCRSSIIndicator - + RC RSSI Status 遥控器RSSI状态 - - RC RSSI Data Unavailable - 遥控器RSSI数据无效 - - - - N/A - No data available - 不可用 - - - - RSSI: - 接收信号强度（RSSI）： + + RSSI + RSSI @@ -15213,8 +14894,19 @@ sudo apt-get 移除调制解调器管理器 Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. 将遥控器摇杆居中并将油门放到最低位置，然后按确定开始复制微调量。 按“确定”后，将遥控器上的微调设为0。 @@ -15330,18 +15022,18 @@ sudo apt-get 移除调制解调器管理器 Spektrum 对频 - - + + Copy Trims 复制微调量 - + Mode 1 模式1（日本手） - + Mode 2 模式2（美国手） @@ -15447,17 +15139,17 @@ Click Next to continue 单击“下一步”继续 - + Next 下一步 - + Calibrate 校准 - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15469,12 +15161,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 集结：%1 - + Rally Points supports version %1 集结点支持版本%1 @@ -15517,192 +15209,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region + + Arm Status Error + Arm Status Error - - GPS GCS - GPS GCS + + Basic ID + Basic ID - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + + Broadcast + Broadcast - - Altitude Fixed - Altitude Fixed + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - Latitude - Latitude - - - - Longitude - Longitude - - - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) + + + + Invalid Operator ID + Invalid Operator ID - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Self ID + Self ID @@ -16564,7 +16277,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings 串口连接设置 @@ -16572,24 +16285,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - 无法发送数据 - 链接 %1 已断开连接！ - - - - Error connecting: Could not create port. %1 - 连接错误：无法创建端口。 %1 - - - - Could not read data - link %1 is disconnected! - 无法读取数据 - 链接 %1 已断开连接！ + + Serial Link Error + Serial Link Error - - Link Error - 链接错误 + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16655,6 +16358,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16774,57 +16515,57 @@ ROTATION_NONE indicates component points in direction of flight. 缺少消息面板文本 - + %1 setup must be completed prior to %2 setup. %1 设置必须在 %2 设置之前完成。 - + %1 does not currently support setup of your vehicle type. %1 当前不支持您的飞机类型的设定。 - + Vehicle settings and info will display after connecting your vehicle. 飞机设置和信息将在连接飞机后显示。 - + You are currently connected to a vehicle but it did not return the full parameter list. 您当前已连接到飞机，但未返回完整参数列表。 - + As a result, the full set of vehicle setup options are not available. 因此，整套飞行器设置选项不可用。 - + Summary 概况 - + Firmware 固件 - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick 游戏手柄 - + Buttons Buttons - + Parameters 参数 @@ -16948,42 +16689,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 未知：%1 - + L L - + Takeoff 起飞 - + Land 着陆 - + Transition Direction Transition Direction - + VTOL Land VTOL着陆 - + ROI 兴趣区域 - + Loiter Loiter @@ -16999,7 +16740,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17007,47 +16748,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17404,7 +17145,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP连接设置 @@ -17412,20 +17153,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - 连接错误 + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected - - Error on link %1. Connection failed - 连接 %1 出错。连接失败 + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 - - Error on link %1. Error on socket: %2. - 连接 %1 出错。socket上的错误：%2。 + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17460,48 +17223,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status 数传接收信号强度（RSSI）状态 - + Local RSSI: 本地 RSSI： - - + + dBm dBm - + Remote RSSI: 远程 RSSI： - + RX Errors: 接收错误： - + Errors Fixed: 错误已修正： - + TX Buffer: 发射缓冲区： - + Local Noise: 本地噪音： - + Remote Noise: 远程噪音： @@ -17693,7 +17456,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17861,7 +17624,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP连接设置 @@ -17869,123 +17632,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP连接错误 - - Error binding UDP port: %1 - 绑定 UDP 端口时出错：%1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! + + + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd - - Error registering Zeroconf - 注册 Zeroconf 时出错 + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18105,22 +17905,22 @@ ROTATION_NONE indicates component points in direction of flight. 温度 - + Choose the measurement units you want to use. You can also change it later in General Settings. 选择您想要使用的测量单位。您也可以稍后在常规设置中更改它。 - + System of units 单位制 - + Metric System 公制 - + Imperial System 英制 @@ -18326,7 +18126,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported 版本 %2 不支持 %1 复杂项目 @@ -18354,78 +18154,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude 高度 - + Radius 半径 - + Loiter clockwise 顺时针盘旋 - + Landing point 着陆点 - + Heading 航向 - + Landing Dist 着陆距离 - + Altitudes relative to launch 相对发射高度 - + Camera 相机 - + * Actual flight path will vary. * 实际飞行路径将有所不同。 - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. 点击地图以设置着陆点。 - + - or - -或者- - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. 拖动悬停点来根据风向和障碍物以及到着陆点的距离调整着陆方向。 - + Done 完成 @@ -18433,184 +18233,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter 悬停模式 - + Approach Approach - + Land 降落 - - VTOLModeIndicator - - - VTOL: FW - 垂直起降：FW - - - - VTOL: MR - 垂直起降：MR - - - - VTOL: Fixed Wing - VTOL：固定翼 - - - - VTOL: Multi-Rotor - VTOL：多旋翼 - - - Vehicle - + Mission transfer failed. Error: %1 任务传输失败。错误： %1 - + GeoFence transfer failed. Error: %1 GeoFence（地理栅栏） 传输失败。错误： %1 - + Rally Point transfer failed. Error: %1 集结点转移失败。错误：%1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2飞行模式 - + armed 已解锁 - + disarmed 未解锁 - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 飞机未响应命令：%1 - + Bootloader flash succeeded Bootloader 刷写成功 - + %1 command temporarily rejected %1 命令暂时拒绝 - + %1 command denied %1 命令被拒绝 - + %1 command not supported %1 命令不支持 - + %1 command failed %1 命令执行失败 @@ -18618,42 +18399,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18661,49 +18442,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18811,22 +18592,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - 视频接收器尚未就绪。 - - - + Invalid video format defined. 无效的视频格式定义。 - + Unabled to record video. Video save path must be specified in Settings. 无法录制视频。必须在设置中指定视频保存路径。 - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18834,142 +18610,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage diff --git a/translations/qgc_source_zh_TW.ts b/translations/qgc_source_zh_TW.ts index 35e8e7b409f..0a2902e7f9e 100644 --- a/translations/qgc_source_zh_TW.ts +++ b/translations/qgc_source_zh_TW.ts @@ -1,14 +1,6 @@ - - ADSBVehicleManager - - - ADSB Server Error: %1 - ADSB Server Error: %1 - - APMAirframeComponent @@ -108,7 +100,7 @@ APMAutoPilotPlugin - + WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406 @@ -116,30 +108,35 @@ APMBatteryIndicator - + + - disabled + - disabled + + + Low Voltage Failsafe Low Voltage Failsafe - - + + Action Action - - + + Voltage Trigger Voltage Trigger - - + + mAh Trigger mAh Trigger - + Critical Voltage Failsafe Critical Voltage Failsafe @@ -486,66 +483,81 @@ APMFirmwarePlugin - + + Guided + Guided + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Auto + Auto + + + Error during Solo video link setup: %1 Error during Solo video link setup: %1 - + Unable to change altitude, vehicle altitude not known. Unable to change altitude, vehicle altitude not known. - + Unable to pause vehicle. Unable to pause vehicle. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Vehicle does not support guided takeoff Vehicle does not support guided takeoff - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to takeoff: Vehicle failed to change to Guided mode. Unable to takeoff: Vehicle failed to change to Guided mode. - + Unable to takeoff: Vehicle failed to arm. Unable to takeoff: Vehicle failed to arm. - - + + Unable to start mission: Vehicle failed to change to Auto mode. Unable to start mission: Vehicle failed to change to Auto mode. - + Unable to start mission: Vehicle failed to change to Guided mode. Unable to start mission: Vehicle failed to change to Guided mode. - + Unable to start mission: Vehicle failed to arm. Unable to start mission: Vehicle failed to arm. - - - Follow failed: Home position not set. - Follow failed: Home position not set. - - - - Follow failed: Ground station cannot provide required position information. - Follow failed: Ground station cannot provide required position information. - APMFlightModeIndicator @@ -857,42 +869,62 @@ L L + + + APMFollowComponentSummary - - Follow Me - Follow Me + + + Follow Enabled + Follow Enabled - - Follow Me Setup is used to configure support for the vehicle following the ground station location. - Follow Me Setup is used to configure support for the vehicle following the ground station location. + + + Follow System ID + Follow System ID - - - APMFollowComponentSummary - - - Batt1 monitor - Batt1 monitor + + + Follow Max Distance + Follow Max Distance - - - Batt1 capacity - Batt1 capacity + + + Follow Offset X + Follow Offset X - - - Batt2 monitor - Batt2 monitor + + + Follow Offset Y + Follow Offset Y - - - Batt2 capacity - Batt2 capacity + + + Follow Offset Z + Follow Offset Z + + + + + Follow Offset Type + Follow Offset Type + + + + + Follow Altitude Type + Follow Altitude Type + + + + + Follow Yaw Behavior + Follow Yaw Behavior @@ -1173,8 +1205,8 @@ APMMainStatusIndicatorContentItem - GCS Failsafe - GCS Failsafe + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe @@ -1182,12 +1214,12 @@ Action - - Timeout - Timeout + + Loss Timeout + Loss Timeout - + Failsafe Options Failsafe Options @@ -1856,25 +1888,25 @@ - + - + Return to Launch Return to Launch - + - + Return at current altitude Return at current altitude - + - + Return at specified altitude: Return at specified altitude: @@ -1897,14 +1929,14 @@ Final land stage descent speed: - - + + Arming Checks Arming Checks - - + + Warning: Turning off arming checks can lead to loss of Vehicle control. Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -2079,42 +2111,42 @@ APMSafetyComponentPlane - + Failsafe Triggers Failsafe Triggers - + Throttle PWM threshold: Throttle PWM threshold: - + Voltage threshold: Voltage threshold: - + MAH threshold: MAH threshold: - + GCS failsafe GCS failsafe - + Return to Launch Return to Launch - + Return at current altitude Return at current altitude - + Return at specified altitude: Return at specified altitude: @@ -2509,34 +2541,34 @@ APMSafetyComponentSummaryPlane - + Throttle failsafe: Throttle failsafe: - - - + + + Disabled Disabled - + Voltage failsafe: Voltage failsafe: - + mAh failsafe: mAh failsafe: - + RTL min alt: RTL min alt: - + current current @@ -3469,12 +3501,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th APMSupportForwardingIndicator - + Mavlink traffic is being forwarded to a support server Mavlink traffic is being forwarded to a support server - + Server name: Server name: @@ -3896,40 +3928,48 @@ Please place your vehicle in water, click the button, and wait. Note that the th Actuator test command failed + + AirLinkConfiguration + + + AirLink Link Settings + AirLink Link Settings + + AirLinkSettings - + Login: Login: - + Password: Password: - + Don't have an account? Don't have an account? - + Register Register - + List of available devices List of available devices - + Refresh Refresh - + Click "Refresh" to authorize Click "Refresh" to authorize @@ -4062,14 +4102,6 @@ Please place your vehicle in water, click the button, and wait. Note that the th Custom Fw. Ver. - - AirlinkConfiguration - - - Airlink Link Settings - Airlink Link Settings - - AirmapSettings @@ -4139,7 +4171,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th AppLogModel - + Open console log output file failed %1 : %2 Open console log output file failed %1 : %2 @@ -4157,17 +4189,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th Logging categories - + Search: Search: - + Clear Clear - + Clear All Clear All @@ -4245,325 +4277,684 @@ Please place your vehicle in water, click the button, and wait. Note that the th CustomActions - + Save to SD card specified for application data. But no SD card present. Using internal storage. Save to SD card specified for application data. But no SD card present. Using internal storage. - + Save to SD card specified for application data. But SD card is write protected. Using internal storage. Save to SD card specified for application data. But SD card is write protected. Using internal storage. - + (Partial) (Partial) - + (Test Only) (Test Only) - ArmedIndicator + ArduCopterFirmwarePlugin - - Armed - Armed + + Stabilize + Stabilize - - Disarmed - Disarmed + + Acro + Acro - - Arm - Arm + + Altitude Hold + Altitude Hold - - Disarm - Disarm + + Auto + Auto - - - AudioOutput - - negative - negative + + Guided + Guided - - point - point + + Loiter + Loiter - - meters - meters + + RTL + RTL - - - AutoPilotPlugin - - One or more vehicle components require setup prior to flight. - One or more vehicle components require setup prior to flight. + + Circle + Circle - - - Autotune - - Autotune: In progress - Autotune: In progress + + Land + Land - - Autotune: initializing - Autotune: initializing + + Drift + Drift - - Autotune: roll - Autotune: roll + + Sport + Sport - - Autotune: pitch - Autotune: pitch + + Flip + Flip - - Autotune: yaw - Autotune: yaw + + Autotune + Autotune - - Wait for disarm - Wait for disarm + + Position Hold + Position Hold - - Land and disarm the vehicle in order to apply the parameters. - Land and disarm the vehicle in order to apply the parameters. + + Brake + Brake - - Autotune: in progress - Autotune: in progress + + Throw + Throw - - Autotune: Success - Autotune: Success + + Avoid ADSB + Avoid ADSB - - Autotune successful. - Autotune successful. + + Guided No GPS + Guided No GPS - - Autotune: Unknown error - Autotune: Unknown error + + Smart RTL + Smart RTL - - Autotune: Failed - Autotune: Failed + + Flow Hold + Flow Hold - - Autotune: Ack error %1 - Autotune: Ack error %1 + + Follow + Follow - - Autotune: Not performed - Autotune: Not performed + + ZigZag + ZigZag - - - AutotuneUI - - Start AutoTune - Start AutoTune + + SystemID + SystemID - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - - WARNING! - -The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! - -Before starting the auto-tuning process, make sure that: -1. You have read the auto-tuning guide and have followed the preliminary steps -2. The current control gains are good enough to stabilize the drone in presence of medium disturbances -3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. - -Click Ok to start the auto-tuning process. - + + AutoRotate + AutoRotate - - - AxisMonitor - - Not Mapped - Not Mapped + + AutoRTL + AutoRTL + + + + Turtle + Turtle - BatteryIndicator + ArduPlaneFirmwarePlugin - - 100% - 100% + + Manual + Manual - - - n/a - n/a + + Circle + Circle - - Battery %1 - Battery %1 + + Stabilize + Stabilize - - Status - Status + + Training + Training - - Charge State - Charge State + + Acro + Acro - - - Remaining - Remaining + + FBW A + FBW A - - Voltage - Voltage + + FBW B + FBW B - - Consumed - Consumed + + Cruise + Cruise - - Temperature - Temperature + + Autotune + Autotune - - Function - Function + + Auto + Auto - - Battery Display - Battery Display + + RTL + RTL - - Vehicle Power - Vehicle Power + + Loiter + Loiter - - Configure - Configure + + Takeoff + Takeoff - - Power - Power + + Avoid ADSB + Avoid ADSB - - - BatteryIndicatorContentItem - - Battery Status - Battery Status + + Guided + Guided - - Battery %1 - Battery %1 + + Initializing + Initializing - - Charge State - Charge State + + QuadPlane Stabilize + QuadPlane Stabilize - - - Remaining - Remaining + + QuadPlane Hover + QuadPlane Hover - - Voltage - Voltage + + QuadPlane Loiter + QuadPlane Loiter - - Consumed - Consumed + + QuadPlane Land + QuadPlane Land - - Temperature - Temperature + + QuadPlane RTL + QuadPlane RTL - - Function - Function + + QuadPlane AutoTune + QuadPlane AutoTune - - - BlankPlanCreator - - Empty Plan - Empty Plan + + QuadPlane Acro + QuadPlane Acro + + + + Thermal + Thermal - BluetoothConfiguration + ArduRoverFirmwarePlugin - - Bluetooth Link Settings + + Manual + Manual + + + + Acro + Acro + + + + Learning + Learning + + + + Steering + Steering + + + + Hold + Hold + + + + Loiter + Loiter + + + + Follow + Follow + + + + Simple + Simple + + + + Dock + Dock + + + + Circle + Circle + + + + Auto + Auto + + + + RTL + RTL + + + + Smart RTL + Smart RTL + + + + Guided + Guided + + + + Initializing + Initializing + + + + ArduSubFirmwarePlugin + + + Manual + Manual + + + + Stabilize + Stabilize + + + + Acro + Acro + + + + Depth Hold + Depth Hold + + + + Auto + Auto + + + + Guided + Guided + + + + Circle + Circle + + + + Surface + Surface + + + + Position Hold + Position Hold + + + + Motor Detection + Motor Detection + + + + Surftrak + Surftrak + + + + ArmedIndicator + + + Armed + Armed + + + + Disarmed + Disarmed + + + + Arm + Arm + + + + Disarm + Disarm + + + + AudioOutput + + + %1 + %1 + + + + AutoPilotPlugin + + + One or more vehicle components require setup prior to flight. + One or more vehicle components require setup prior to flight. + + + + Autotune + + + Autotune: In progress + Autotune: In progress + + + + Autotune: initializing + Autotune: initializing + + + + Autotune: roll + Autotune: roll + + + + Autotune: pitch + Autotune: pitch + + + + Autotune: yaw + Autotune: yaw + + + + Wait for disarm + Wait for disarm + + + + Land and disarm the vehicle in order to apply the parameters. + Land and disarm the vehicle in order to apply the parameters. + + + + Autotune: in progress + Autotune: in progress + + + + Autotune: Success + Autotune: Success + + + + Autotune successful. + Autotune successful. + + + + Autotune: Unknown error + Autotune: Unknown error + + + + Autotune: Failed + Autotune: Failed + + + + Autotune: Ack error %1 + Autotune: Ack error %1 + + + + Autotune: Not performed + Autotune: Not performed + + + + AutotuneUI + + + Start AutoTune + Start AutoTune + + + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + WARNING! + +The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure! + +Before starting the auto-tuning process, make sure that: +1. You have read the auto-tuning guide and have followed the preliminary steps +2. The current control gains are good enough to stabilize the drone in presence of medium disturbances +3. You are ready to abort the auto-tuning sequence by moving the RC sticks, if anything unexpected happens. + +Click Ok to start the auto-tuning process. + + + + + AxisMonitor + + + Not Mapped + Not Mapped + + + + BatteryIndicator + + + + 100% + 100% + + + + + n/a + n/a + + + + Battery %1 + Battery %1 + + + + Status + Status + + + + Charge State + Charge State + + + + + Remaining + Remaining + + + + Voltage + Voltage + + + + Consumed + Consumed + + + + Temperature + Temperature + + + + Function + Function + + + + Battery Display + Battery Display + + + + Value + Value + + + + Coloring + Coloring + + + + Low + Low + + + + Critical + Critical + + + + Vehicle Power + Vehicle Power + + + + Configure + Configure + + + + Power + Power + + + + BlankPlanCreator + + + Empty Plan + Empty Plan + + + + BluetoothConfiguration + + + Bluetooth Link Settings Bluetooth Link Settings - + Bluetooth Not Available Bluetooth Not Available @@ -4571,10 +4962,15 @@ Click Ok to start the auto-tuning process. BluetoothLink - + Bluetooth Link Error Bluetooth Link Error + + + Link %1: (Device: %2) %3 + Link %1: (Device: %2) %3 + BluetoothSettings @@ -4604,6 +5000,34 @@ Click Ok to start the auto-tuning process. Stop + + BluetoothWorker + + + Data to Send is Empty + Data to Send is Empty + + + + Socket is not connected + Socket is not connected + + + + Socket is not Writable + Socket is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + Bootloader @@ -4784,27 +5208,27 @@ Click Ok to start the auto-tuning process. CameraCalcCamera - + Width Width - + Height Height - + Sensor Sensor - + Image Image - + Focal length Focal length @@ -4812,27 +5236,27 @@ Click Ok to start the auto-tuning process. CameraCalcGrid - + Front Lap Front Lap - + Side Lap Side Lap - + Overlap Overlap - + Select one: Select one: - + Grnd Res Grnd Res @@ -5094,7 +5518,7 @@ Click Ok to start the auto-tuning process. Component %1 - + Internal Error: Parameter MetaData major must be 1 Internal Error: Parameter MetaData major must be 1 @@ -5102,13 +5526,13 @@ Click Ok to start the auto-tuning process. ComplexMissionItem - - + + This Pattern does not support Presets. This Pattern does not support Presets. - + '%1' is a built-in preset which cannot be deleted. '%1' is a built-in preset which cannot be deleted. @@ -5177,18 +5601,18 @@ Click Ok to start the auto-tuning process. CustomActionManager - + Failed to load custom actions file: `%1` error: `%2` Failed to load custom actions file: `%1` error: `%2` - - + + Custom actions file - incorrect format: %1 Custom actions file - incorrect format: %1 - + Custom actions file - incorrect format: JsonValue not an object Custom actions file - incorrect format: JsonValue not an object @@ -5558,14 +5982,6 @@ Click Ok to start the auto-tuning process. MGRS - - ExitWithErrorWindow - - - Close - Close - - FTPManager @@ -5619,53 +6035,58 @@ Click Ok to start the auto-tuning process. Set to vehicle location - - + + Altitude Altitude - + + Flight Speed + Flight Speed + + + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Glide Slope Glide Slope - + Altitudes relative to launch Altitudes relative to launch - + Drag the loiter point to adjust landing direction for wind and obstacles. Drag the loiter point to adjust landing direction for wind and obstacles. - + Done Done - + Camera Camera @@ -5680,32 +6101,32 @@ Click Ok to start the auto-tuning process. Use loiter to altitude - + Distance Distance - + * Approximate glide slope altitudes. * Approximate glide slope altitudes. - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on landing. * Avoid tailwind on landing. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - @@ -5713,22 +6134,22 @@ Click Ok to start the auto-tuning process. FWLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Landing Area Landing Area - + Glide Slope Glide Slope @@ -5796,23 +6217,10 @@ Click Ok to start the auto-tuning process. Invalid number - - FactSlider - - - N/A - N/A - - FactTextField - - Invalid Value - Invalid Value - - - + Value Details Value Details @@ -5833,537 +6241,169 @@ Click Ok to start the auto-tuning process. Default - - Small - Small - - - - Medium - Medium - - - - Large - Large - - - - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - - - Load Settings - Load Settings - - - - FactValueSlider - - - Value Details - Value Details - - - - Firmware Class - - - PX4 Pro - PX4 Pro - - - - ArduPilot - ArduPilot - - - - Generic - Generic - - - - Unknown - Unknown - - - - FirmwareImage - - - Incorrectly formatted line in .ihx file, line too short - Incorrectly formatted line in .ihx file, line too short - - - - Unsupported record type in file: %1 - Unsupported record type in file: %1 - - - - Unable to open firmware file %1, error: %2 - Unable to open firmware file %1, error: %2 - - - - Supplied file is not a valid JSON document - Supplied file is not a valid JSON document - - - - Firmware file missing required key: %1 - Firmware file missing required key: %1 - - - - Firmware file has invalid key: %1 - Firmware file has invalid key: %1 - - - - Downloaded firmware board id does not match hardware board id: %1 != %2 - Downloaded firmware board id does not match hardware board id: %1 != %2 - - - - Write failed for parameter meta data file, error: %1 - Write failed for parameter meta data file, error: %1 - - - - Unable to open parameter meta data file %1 for writing, error: %2 - Unable to open parameter meta data file %1 for writing, error: %2 - - - - Write failed for airframe meta data file, error: %1 - Write failed for airframe meta data file, error: %1 - - - - Unable to open airframe meta data file %1 for writing, error: %2 - Unable to open airframe meta data file %1 for writing, error: %2 - - - - Unable to open decompressed file %1 for writing, error: %2 - Unable to open decompressed file %1 for writing, error: %2 - - - - Write failed for decompressed image file, error: %1 - Write failed for decompressed image file, error: %1 - - - - Firmware file has invalid decompressed size for %1 - Firmware file has invalid decompressed size for %1 - - - - Could not find compressed bytes for %1 in Firmware file - Could not find compressed bytes for %1 in Firmware file - - - - Incorrectly formed compressed bytes section for %1 in Firmware file - Incorrectly formed compressed bytes section for %1 in Firmware file - - - - Firmware file has 0 length %1 - Firmware file has 0 length %1 - - - - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - - Successfully decompressed %1 - Successfully decompressed %1 - - - - Unabled to open firmware file %1, %2 - Unabled to open firmware file %1, %2 - - - - FirmwarePlugin - - - - - - Canon - Canon - - - - S100 PowerShot - S100 PowerShot - - - - Canon S100 PowerShot - Canon S100 PowerShot - - - - EOS-M 22mm - EOS-M 22mm - - - - Canon EOS-M 22mm - Canon EOS-M 22mm - - - - G9 X PowerShot - G9 X PowerShot - - - - Canon G9 X PowerShot - Canon G9 X PowerShot - - - - SX260 HS PowerShot - SX260 HS PowerShot - - - - Canon SX260 HS PowerShot - Canon SX260 HS PowerShot - - - - GoPro - GoPro - - - - Hero 4 - Hero 4 - - - - GoPro Hero 4 - GoPro Hero 4 - - - - - Parrot - Parrot - - - - Sequioa RGB - Sequioa RGB - - - - Parrot Sequioa RGB - Parrot Sequioa RGB - - - - Sequioa Monochrome - Sequioa Monochrome - - - - Parrot Sequioa Monochrome - Parrot Sequioa Monochrome - - - - - - RedEdge - RedEdge - - - - Ricoh - Ricoh - - - - GR II - GR II - - - - Ricoh GR II - Ricoh GR II - - - - - - - Sentera - Sentera - - - - Double 4K Sensor - Double 4K Sensor - - - - Sentera Double 4K Sensor - Sentera Double 4K Sensor - - - - NDVI Single Sensor - NDVI Single Sensor - - - - Sentera NDVI Single Sensor - Sentera NDVI Single Sensor - - - - 6X Sensor - 6X Sensor - - - - 65R Sensor - 65R Sensor - - - - - - - - - - - - - - - - - Sony - Sony - - - - a6000 16mm - a6000 16mm - - - - Sony a6000 16mm - Sony a6000 16mm - - - - a6000 35mm - a6000 35mm - - - - a6300 Zeiss 21mm f/2.8 - a6300 Zeiss 21mm f/2.8 - - - - Sony a6300 Zeiss 21mm f/2.8 - Sony a6300 Zeiss 21mm f/2.8 - - - - a6300 Sony 28mm f/2.0 - a6300 Sony 28mm f/2.0 - - - - Sony a6300 Sony 28mm f/2.0 - Sony a6300 Sony 28mm f/2.0 - - - - a7R II Zeiss 21mm f/2.8 - a7R II Zeiss 21mm f/2.8 - - - - Sony a7R II Zeiss 21mm f/2.8 - Sony a7R II Zeiss 21mm f/2.8 - - - - a7R II Sony 28mm f/2.0 - a7R II Sony 28mm f/2.0 + + Small + Small - - Sony a7R II Sony 28mm f/2.0 - Sony a7R II Sony 28mm f/2.0 + + Medium + Medium - - a7r III 35mm - a7r III 35mm + + Large + Large - - a7r IV 35mm - a7r IV 35mm + + Settings version %1 for %2 is not supported. Setup will be reset to defaults. + Settings version %1 for %2 is not supported. Setup will be reset to defaults. - - DSC-QX30U @ 4.3mm f/3.5 - DSC-QX30U @ 4.3mm f/3.5 + + Load Settings + Load Settings + + + FactValueSlider - - Sony DSC-QX30U @ 4.3mm f/3.5 - Sony DSC-QX30U @ 4.3mm f/3.5 + + Value Details + Value Details + + + Firmware Class - - DSC-RX0 - DSC-RX0 + + PX4 Pro + PX4 Pro - - Sony DSC-RX0 - Sony DSC-RX0 + + ArduPilot + ArduPilot - - DSC-RX1R II 35mm - DSC-RX1R II 35mm + + Generic + Generic - - ILCE-QX1 - ILCE-QX1 + + Unknown + Unknown + + + FirmwareImage - - Sony ILCE-QX1 - Sony ILCE-QX1 + + Incorrectly formatted line in .ihx file, line too short + Incorrectly formatted line in .ihx file, line too short - - NEX-5R 20mm - NEX-5R 20mm + + Unsupported record type in file: %1 + Unsupported record type in file: %1 - - Sony NEX-5R 20mm - Sony NEX-5R 20mm + + Unable to open firmware file %1, error: %2 + Unable to open firmware file %1, error: %2 - - RX100 II 28mm - RX100 II 28mm + + Supplied file is not a valid JSON document + Supplied file is not a valid JSON document - - Sony RX100 II 28mm - Sony RX100 II 28mm + + Firmware file missing required key: %1 + Firmware file missing required key: %1 - - - - - Yuneec - Yuneec + + Firmware file has invalid key: %1 + Firmware file has invalid key: %1 - - CGOET - CGOET + + Downloaded firmware board id does not match hardware board id: %1 != %2 + Downloaded firmware board id does not match hardware board id: %1 != %2 - - Yuneec CGOET - Yuneec CGOET + + Write failed for parameter meta data file, error: %1 + Write failed for parameter meta data file, error: %1 - - E10T - E10T + + Unable to open parameter meta data file %1 for writing, error: %2 + Unable to open parameter meta data file %1 for writing, error: %2 - - Yuneec E10T - Yuneec E10T + + Write failed for airframe meta data file, error: %1 + Write failed for airframe meta data file, error: %1 - - E50 - E50 + + Unable to open airframe meta data file %1 for writing, error: %2 + Unable to open airframe meta data file %1 for writing, error: %2 - - Yuneec E50 - Yuneec E50 + + Unable to open decompressed file %1 for writing, error: %2 + Unable to open decompressed file %1 for writing, error: %2 - - E90 - E90 + + Write failed for decompressed image file, error: %1 + Write failed for decompressed image file, error: %1 - - Yuneec E90 - Yuneec E90 + + Firmware file has invalid decompressed size for %1 + Firmware file has invalid decompressed size for %1 - - - Flir - Flir + + Could not find compressed bytes for %1 in Firmware file + Could not find compressed bytes for %1 in Firmware file - - Duo R - Duo R + + Incorrectly formed compressed bytes section for %1 in Firmware file + Incorrectly formed compressed bytes section for %1 in Firmware file - - Flir Duo R - Flir Duo R + + Firmware file has 0 length %1 + Firmware file has 0 length %1 - - Duo Pro R - Duo Pro R + + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) + Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2) - - - Workswell - Workswell + + Successfully decompressed %1 + Successfully decompressed %1 - - - Wiris Security - Wiris Security + + Unabled to open firmware file %1, %2 + Unabled to open firmware file %1, %2 + + + FirmwarePlugin - + Vehicle is not running latest stable firmware! Running %1, latest stable is %2. Vehicle is not running latest stable firmware! Running %1, latest stable is %2. @@ -6381,11 +6421,6 @@ Click Ok to start the auto-tuning process. Firmware Setup Firmware Setup - - - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras. - Update the autopilot firmware to the latest version @@ -6397,7 +6432,7 @@ Click Ok to start the auto-tuning process. All %1 connections to vehicles must be - + Upgrade cancelled Upgrade cancelled @@ -6406,6 +6441,11 @@ Click Ok to start the auto-tuning process. Select Firmware File Select Firmware File + + + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + %1 can upgrade the firmware on Pixhawk devices and SiK Radios. + Plug in your device @@ -6492,162 +6532,144 @@ Click Ok to start the auto-tuning process. Found device - - + + PX4 Pro PX4 Pro - + Either firmware list is still downloading, or no firmware is available for current selection. Either firmware list is still downloading, or no firmware is available for current selection. - + You must choose a board type. You must choose a board type. - + No firmware was found for the current selection. No firmware was found for the current selection. - - + Standard Version (stable) Standard Version (stable) - + Beta Testing (beta) Beta Testing (beta) - + Developer Build (master) Developer Build (master) - - - + + Custom firmware file... Custom firmware file... - - PX4 Pro - PX4 Pro - - - - + ArduPilot ArduPilot - + Standard Version Standard Version - - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle: - - - + Detected Pixhawk board. You can select from the following flight stacks: Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. Press Ok to upgrade your vehicle. - + Downloading list of available firmwares... Downloading list of available firmwares... - + No Firmware Available No Firmware Available - + Advanced settings Advanced settings - + Select the standard version or one from the file system (previously downloaded): Select the standard version or one from the file system (previously downloaded): - - Select which version of the firmware you would like to install: - Select which version of the firmware you would like to install: - - - + Select which version of the above flight stack you would like to install: Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. It is only intended for DEVELOPERS. - + Run bench tests without props first. Run bench tests without props first. - + Do NOT fly this without additional safety precautions. Do NOT fly this without additional safety precautions. - + Follow the forums actively when using it. Follow the forums actively when using it. - + Flash ChibiOS Bootloader Flash ChibiOS Bootloader @@ -6655,87 +6677,87 @@ Click Ok to start the auto-tuning process. FirmwareUpgradeController - + Connect not allowed during Firmware Upgrade. Connect not allowed during Firmware Upgrade. - + Connected to bootloader: Connected to bootloader: - + Version: %1 Version: %1 - + Board ID: %1 Board ID: %1 - + Flash size: %1 Flash size: %1 - + Custom firmware selected but no filename given. Custom firmware selected but no filename given. - + Unable to find specified firmware for board type Unable to find specified firmware for board type - + No firmware file selected No firmware file selected - + Downloading firmware... Downloading firmware... - + From: %1 From: %1 - + Download complete Download complete - + Image load failed Image load failed - + Bootloader not found Bootloader not found - + Image size of %1 is too large for board flash size %2 Image size of %1 is too large for board flash size %2 - + Upgrade complete Upgrade complete - + Upgrade cancelled Upgrade cancelled - + Choose board type Choose board type @@ -6836,7 +6858,7 @@ Click Ok to start the auto-tuning process. Fixed Wing Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -6844,12 +6866,12 @@ Click Ok to start the auto-tuning process. FlightDisplayViewVideo - + WAITING FOR VIDEO WAITING FOR VIDEO - + VIDEO DISABLED VIDEO DISABLED @@ -6862,15 +6884,6 @@ Click Ok to start the auto-tuning process. Specify Position - - FlightModeDropdown - - - N/A - No data to display - N/A - - FlightModeIndicator @@ -7025,26 +7038,31 @@ Click Ok to start the auto-tuning process. + Set Heading + Set Heading + + + Lat: %1 Lat: %1 - + Lon: %1 Lon: %1 - + Edit ROI Position Edit ROI Position - + Cancel ROI Cancel ROI - + Edit Position Edit Position @@ -7098,153 +7116,153 @@ Click Ok to start the auto-tuning process. FlyViewSettings - + <None> <None> - + General General - + Use Preflight Checklist Use Preflight Checklist - + Enforce Preflight Checklist Enforce Preflight Checklist - + Keep Map Centered On Vehicle Keep Map Centered On Vehicle - + Show Telemetry Log Replay Status Bar Show Telemetry Log Replay Status Bar - + Show simple camera controls (DIGICAM_CONTROL) Show simple camera controls (DIGICAM_CONTROL) - + Update return to home position based on device location. Update return to home position based on device location. - + Guided Commands Guided Commands - + Minimum Altitude Minimum Altitude - + Maximum Altitude Maximum Altitude - + Go To Location Max Distance Go To Location Max Distance - + Custom MAVLink Actions Custom MAVLink Actions - + Custom action JSON files should be created in the '%1' folder. Custom action JSON files should be created in the '%1' folder. - + Fly View Custom Actions Fly View Custom Actions - + Joystick Custom Actions Joystick Custom Actions - + Virtual Joystick Virtual Joystick - - + + Enabled Enabled - + Auto-Center Throttle Auto-Center Throttle - + Instrument Panel Instrument Panel - + Show additional heading indicators on Compass Show additional heading indicators on Compass - + Lock Compass Nose-Up Lock Compass Nose-Up - + 3D View 3D View - + 3D Map File: 3D Map File: - + Clear Clear - + Select File Select File - + OpenStreetMap files (*.osm) OpenStreetMap files (*.osm) - + Select map file Select map file - + Average Building Level Height Average Building Level Height - + Vehicles Altitude Bias Vehicles Altitude Bias @@ -7315,113 +7333,131 @@ Click Ok to start the auto-tuning process. Double-click to exit full screen + + GPSIndicator + + + RTK + RTK + + GPSIndicatorPage - + N/A No data to display N/A - + --.-- No data to display --.-- - + Vehicle GPS Status Vehicle GPS Status - - + + Satellites Satellites - + GPS Lock GPS Lock - + HDOP HDOP - + VDOP VDOP - + Course Over Ground Course Over Ground - + RTK GPS Status RTK GPS Status - + Survey-in Active Survey-in Active - + RTK Streaming RTK Streaming - + Duration Duration - + Accuracy Accuracy - + Current Accuracy Current Accuracy - + RTK GPS Settings RTK GPS Settings - + AutoConnect AutoConnect - - Perform Survey-In - Perform Survey-In + + Survey-In + Survey-In + + + + Specify position + Specify position + + + + Accuracy (u-blox only) + Accuracy (u-blox only) - - Use Specified Base Position - Use Specified Base Position + + Min Duration + Min Duration - + Current Base Position Current Base Position - + Save Save - + Not Yet Valid Not Yet Valid @@ -7429,7 +7465,7 @@ Click Ok to start the auto-tuning process. GeneralSettings - + Units Units @@ -7444,39 +7480,39 @@ Click Ok to start the auto-tuning process. Color Scheme - + Stream GCS Position Stream GCS Position - + Mute all audio output Mute all audio output - + Clear all settings on next start Clear all settings on next start - + Application Load/Save Path Application Load/Save Path - - - + + + Browse Browse - + Choose the location to save/load files Choose the location to save/load files - + UI Scaling UI Scaling @@ -7486,43 +7522,43 @@ Click Ok to start the auto-tuning process. General - + Save application data to SD Card Save application data to SD Card - + <default location> <default location> - + Brand Image Brand Image - + Indoor Image Indoor Image - - + + Choose custom brand image file Choose custom brand image file - + Outdoor Image Outdoor Image - + Reset Images Reset Images - + Reset Reset @@ -7530,17 +7566,17 @@ Click Ok to start the auto-tuning process. GeoFenceController - + GeoFence supports version %1 GeoFence supports version %1 - + GeoFence polygon not stored as object GeoFence polygon not stored as object - + GeoFence circle not stored as object GeoFence circle not stored as object @@ -7678,27 +7714,45 @@ Click Ok to start the auto-tuning process. GeoTagController - - Images have alreay been tagged. Existing images will be removed. - Images have alreay been tagged. Existing images will be removed. + + Empty Filename. + Empty Filename. + + + + Invalid Filename. + Invalid Filename. + + + + + + + Invalid Directory. + Invalid Directory. + + + + Images have already been tagged. Existing images will be removed. + Images have already been tagged. Existing images will be removed. - + The save folder already contains images. The save folder already contains images. - + Cannot find the image directory. Cannot find the image directory. - + Couldn't replace the previously tagged images Couldn't replace the previously tagged images - + Cannot find the save directory. Cannot find the save directory. @@ -7706,39 +7760,39 @@ Click Ok to start the auto-tuning process. GeoTagPage - + Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag. - - + + Select log file Select log file - + ULog file (*.ulg) ULog file (*.ulg) - + PX4 log file (*.px4log) PX4 log file (*.px4log) - + All Files (*) All Files (*) - - + + Select image directory Select image directory - + (Optionally) Select save directory (Optionally) Select save directory @@ -7748,22 +7802,22 @@ Click Ok to start the auto-tuning process. Select save directory - + /TAGGED folder in your image folder /TAGGED folder in your image folder - + /TAGGED /TAGGED - + Cancel Tagging Cancel Tagging - + Start Tagging Start Tagging @@ -7771,192 +7825,199 @@ Click Ok to start the auto-tuning process. GeoTagWorker - + The image directory doesn't contain images, make sure your images are of the JPG format The image directory doesn't contain images, make sure your images are of the JPG format - - + + Geotagging failed. Couldn't open image: %1 + Geotagging failed. Couldn't open image: %1 + + + + Geotagging failed. Couldn't extract time from image: %1 + Geotagging failed. Couldn't extract time from image: %1 + + + + Calibration failed: No triggers or images available. + Calibration failed: No triggers or images available. + + + + Calibration failed: No matching triggers found for images. + Calibration failed: No matching triggers found for images. + + + Geotagging failed. Couldn't open an image. Geotagging failed. Couldn't open an image. - - - - - - + + + Geotagging failed. Couldn't write to image: %1 + Geotagging failed. Couldn't write to image: %1 + + + + + Tagging cancelled Tagging cancelled - + Geotagging failed. Couldn't open log file. Geotagging failed. Couldn't open log file. - - %1 - tagging cancelled - %1 - tagging cancelled - - - + Log parsing failed Log parsing failed - - Geotagging failed in trigger filtering - Geotagging failed in trigger filtering - - - + Geotagging failed. Requesting image #%1, but only %2 images present. Geotagging failed. Requesting image #%1, but only %2 images present. - - - Geotagging failed. Couldn't write to image. - Geotagging failed. Couldn't write to image. - - - - Geotagging failed. Couldn't write to an image. - Geotagging failed. Couldn't write to an image. - GimbalIndicator - - + + Gimbal Gimbal - + <br> Controls <br> Controls - + Yaw <br> Follow Yaw <br> Follow - + Yaw <br> Lock Yaw <br> Lock - + Center Center - + Tilt 90 Tilt 90 - + Point <br> Home Point <br> Home - + Retract Retract - + Release <br> Control Release <br> Control - + Acquire <br> Control Acquire <br> Control - + Active <br> Gimbal: Active <br> Gimbal: - + Select <br> Gimbal Select <br> Gimbal - + Settings Settings - + Control type: Control type: - + Horizontal FOV Horizontal FOV - + Vertical FOV Vertical FOV - + Max speed: Max speed: - + + Joystick buttons speed: + Joystick buttons speed: + + + Show gimbal Azimuth indicator in map Show gimbal Azimuth indicator in map - + Use Azimuth instead of local yaw on top toolbar indicator Use Azimuth instead of local yaw on top toolbar indicator - + Show Acquire/Release control button Show Acquire/Release control button - + Retracted Retracted - + Yaw locked Yaw locked - + Yaw follow Yaw follow - + P: P: - + Az: Az: - + Y: Y: @@ -8070,7 +8131,7 @@ Click Ok to start the auto-tuning process. Go To Location - + Return to the launch position of the vehicle. Return to the launch position of the vehicle. @@ -8125,162 +8186,172 @@ Click Ok to start the auto-tuning process. Set Flight Mode - + + Change Heading + Change Heading + + + Arm the vehicle. Arm the vehicle. - + WARNING: This will force arming of the vehicle bypassing any safety checks. WARNING: This will force arming of the vehicle bypassing any safety checks. - + Disarm the vehicle Disarm the vehicle - + WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH. - + Takeoff from ground and hold position. Takeoff from ground and hold position. - + Grab or Release the cargo Grab or Release the cargo - + Takeoff from ground and start the current mission. Takeoff from ground and start the current mission. - + Continue the mission from the current waypoint. Continue the mission from the current waypoint. - + Upload of resume mission failed. Confirm to retry upload Upload of resume mission failed. Confirm to retry upload - + Land the vehicle at the current position. Land the vehicle at the current position. - + Change the altitude of the vehicle up or down. Change the altitude of the vehicle up or down. - + Change the maximum horizontal cruise speed. Change the maximum horizontal cruise speed. - + Change the equivalent airspeed setpoint Change the equivalent airspeed setpoint - + Move the vehicle to the specified location. Move the vehicle to the specified location. - + Adjust current waypoint to %1. Adjust current waypoint to %1. - + Orbit the vehicle around the specified location. Orbit the vehicle around the specified location. - + Abort the landing sequence. Abort the landing sequence. - + Pause the vehicle at it's current position, adjusting altitude up or down as needed. Pause the vehicle at it's current position, adjusting altitude up or down as needed. - + Pause all vehicles at their current position. Pause all vehicles at their current position. - + Transition VTOL to fixed wing flight. Transition VTOL to fixed wing flight. - + Transition VTOL to multi-rotor flight. Transition VTOL to multi-rotor flight. - + Make the specified location a Region Of Interest. Make the specified location a Region Of Interest. - + Set vehicle home as the specified location. This will affect Return to Home position Set vehicle home as the specified location. This will affect Return to Home position - + Make the specified location the estimator origin. Make the specified location the estimator origin. - + Set the vehicle flight mode to %1 Set the vehicle flight mode to %1 - + + Set the vehicle heading towards the specified location. + Set the vehicle heading towards the specified location. + + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15) - + Height (rel) Height (rel) - + Airspeed Airspeed - + Speed Speed - + Alt (rel) Alt (rel) - + Smart RTL Smart RTL - + Internal error: unknown actionCode Internal error: unknown actionCode @@ -8320,13 +8391,13 @@ Click Ok to start the auto-tuning process. HorizontalFactValueGrid - + + + - - + + - - @@ -8334,99 +8405,119 @@ Click Ok to start the auto-tuning process. InstrumentValue - + None None - + Color Color - + Opacity Opacity - + Icon Icon InstrumentValueEditDialog - - - Value Display - Value Display - Valuec requires a connected vehicle for setup. Valuec requires a connected vehicle for setup. - + Icon Icon - + Text Text - + + + Label Label - + + Telemetry Display + Telemetry Display + + + + Telemetry + Telemetry + + + + Group + Group + + + + Value + Value + + + + Change + Change + + + Size Size - + Show Units Show Units - - Range - Range + + Value range + Value range - - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + + Type + Type - - - - - - - + + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. + Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself. - - - + + + Add Row Add Row - + Specify the icon you want to display based on value ranges. Specify the icon you want to display based on value ranges. - + Specify the icon opacity you want based on value ranges. Specify the icon opacity you want based on value ranges. - + Select Icon Select Icon @@ -8442,152 +8533,152 @@ Click Ok to start the auto-tuning process. Joystick - + No Action No Action - + Arm Arm - + Disarm Disarm - + Toggle Arm Toggle Arm - + VTOL: Fixed Wing VTOL: Fixed Wing - + VTOL: Multi-Rotor VTOL: Multi-Rotor - + Continuous Zoom In Continuous Zoom In - + Continuous Zoom Out Continuous Zoom Out - + Step Zoom In Step Zoom In - + Step Zoom Out Step Zoom Out - + Trigger Camera Trigger Camera - + Start Recording Video Start Recording Video - + Stop Recording Video Stop Recording Video - + Toggle Recording Video Toggle Recording Video - + Gimbal Down Gimbal Down - + Gimbal Up Gimbal Up - + Gimbal Left Gimbal Left - + Gimbal Right Gimbal Right - + Gimbal Center Gimbal Center - + Gimbal Yaw Lock Gimbal Yaw Lock - + Gimbal Yaw Follow Gimbal Yaw Follow - + Emergency Stop Emergency Stop - + Gripper Close Gripper Close - + Gripper Open Gripper Open - + Landing gear deploy Landing gear deploy - + Landing gear retract Landing gear retract - + Next Video Stream Next Video Stream - + Previous Video Stream Previous Video Stream - + Next Camera Next Camera - + Previous Camera Previous Camera @@ -8758,7 +8849,7 @@ Click Ok to start the auto-tuning process. JoystickConfigController - + Detected %1 joystick axes. To operate PX4, you need at least %2 axes. Detected %1 joystick axes. To operate PX4, you need at least %2 axes. @@ -8824,29 +8915,29 @@ Click Ok to start the auto-tuning process. JoystickIndicator - + Joystick Status Joystick Status - + Connected: Connected: - - + + Yes Yes - - + + No No - + Enabled: Enabled: @@ -8934,12 +9025,12 @@ Click Ok to start the auto-tuning process. LandingComplexItem - + %1 does not support loading this complex mission item type: %2:%3 %1 does not support loading this complex mission item type: %2:%3 - + Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight. @@ -8947,12 +9038,12 @@ Click Ok to start the auto-tuning process. LinkInterface - + Signing Failure Signing Failure - + Signing signature mismatch Signing signature mismatch @@ -8960,51 +9051,55 @@ Click Ok to start the auto-tuning process. LinkManager - + Connect not allowed: %1 Connect not allowed: %1 - - - - + + + %1 on %2 (AutoConnect) %1 on %2 (AutoConnect) - + Shutdown Shutdown - + Serial Serial - + UDP UDP - + TCP TCP - + + Bluetooth + Bluetooth + + + Mock Link Mock Link - + AirLink AirLink - - + + Log Replay Log Replay @@ -9012,12 +9107,12 @@ Click Ok to start the auto-tuning process. LinkSettings - + Add Add - + Connect Connect @@ -9027,93 +9122,123 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK - + + NMEA GPS + NMEA GPS + + + + Device + Device + + + + Disabled + Disabled + + + + UDP Port + UDP Port + + + + Serial <none available> + Serial <none available> + + + + Baudrate + Baudrate + + + + NMEA stream UDP port + NMEA stream UDP port + + + Links Links - + Delete Link Delete Link - + Are you sure you want to delete '%1'? Are you sure you want to delete '%1'? - + Disconnect Disconnect - - + + Add New Link Add New Link - + Edit Link Edit Link - + Name Name - + Enter name Enter name - + Automatically Connect on Start Automatically Connect on Start - + High Latency High Latency - + Type Type @@ -9121,216 +9246,165 @@ Click Ok to start the auto-tuning process. LogDownloadController - + Available Available - - + Canceled Canceled - - - + + Error Error - + Downloaded Downloaded - - Timed Out - Timed Out - - - + Waiting Waiting - - - UnknownDate - UnknownDate - LogDownloadPage - + Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs. - + Id Id - + Date Date - + Date Unknown Date Unknown - + Size Size - + Status Status - + Refresh Refresh - + Log Refresh Log Refresh - + You must be connected to a vehicle in order to download logs. You must be connected to a vehicle in order to download logs. - + Download Download - + Log Download Log Download - + You must select at least one log file to download. You must select at least one log file to download. - + Select save directory Select save directory - + Erase All Erase All - + Delete All Log Files Delete All Log Files - + All log files will be erased permanently. Is this really what you want? All log files will be erased permanently. Is this really what you want? - + Cancel Cancel - LogReplayLink - - - Log Replay Error - Log Replay Error - - - - You must close all connections prior to replaying a log. - You must close all connections prior to replaying a log. - - - - Attempt to load new log while log being played - Attempt to load new log while log being played - - - - Unable to open log file: '%1', error: %2 - Unable to open log file: '%1', error: %2 - - - - The log file '%1' is corrupt or empty. - The log file '%1' is corrupt or empty. - - - - Connect not allowed during Flight Data replay. - Connect not allowed during Flight Data replay. - - - - - Unable to seek to new position - Unable to seek to new position - - - - LogReplayLinkConfiguration + LogReplayConfiguration - + Log Replay Link Settings Log Replay Link Settings - LogReplayLinkController + LogReplayLink - - %2m:%3s - %2m:%3s + + Log Replay Link Error + Log Replay Link Error - - %1h:%2m:%3s - %1h:%2m:%3s + + Link: %1, %2. + Link: %1, %2. LogReplaySettings - + Log File Log File - + Browse Browse - + Select Telemetery Log Select Telemetery Log - + Telemetry Logs (*.%1) Telemetry Logs (*.%1) - + All Files (*) All Files (*) @@ -9363,180 +9437,214 @@ Click Ok to start the auto-tuning process. All Files (*) - + Pause Pause - + Play Play - + Load Telemetry Log Load Telemetry Log - + Close Close + + LogReplayWorker + + + You must close all connections prior to replaying a log. + You must close all connections prior to replaying a log. + + + + Connect not allowed during Flight Data replay. + Connect not allowed during Flight Data replay. + + + + + Unable to seek to new position + Unable to seek to new position + + + + Attempt to load new log while log being played + Attempt to load new log while log being played + + + + Unable to open log file: '%1', error: %2 + Unable to open log file: '%1', error: %2 + + + + The log file '%1' is corrupt or empty. + The log file '%1' is corrupt or empty. + + MAVLink SYS_STATUS_SENSOR value - + Gyro Gyro - + Accelerometer Accelerometer - + Magnetometer Magnetometer - + Absolute pressure Absolute pressure - + Differential pressure Differential pressure - + GPS GPS - + Optical flow Optical flow - + Computer vision position Computer vision position - + Laser based position Laser based position - + External ground truth External ground truth - + Angular rate control Angular rate control - + Attitude stabilization Attitude stabilization - + Yaw position Yaw position - + Z/altitude control Z/altitude control - + X/Y position control X/Y position control - + Motor outputs / control Motor outputs / control - + RC receiver RC receiver - + Gyro 2 Gyro 2 - + Accelerometer 2 Accelerometer 2 - + Magnetometer 2 Magnetometer 2 - + GeoFence GeoFence - + AHRS AHRS - + Terrain Terrain - + Motors reversed Motors reversed - + Logging Logging - + Battery Battery - + Proximity Proximity - + Satellite Communication Satellite Communication - + Pre-Arm Check Pre-Arm Check - + Avoidance/collision prevention Avoidance/collision prevention - + Propulsion Propulsion @@ -9544,7 +9652,7 @@ Click Ok to start the auto-tuning process. MAVLink unknown SYS_STATUS_SENSOR value - + Unknown sensor Unknown sensor @@ -9565,17 +9673,17 @@ Click Ok to start the auto-tuning process. MAVLinkConsolePage - + Provides a connection to the vehicle's system shell. Provides a connection to the vehicle's system shell. - + Enter Commands here... Enter Commands here... - + Send Send @@ -9583,79 +9691,79 @@ Click Ok to start the auto-tuning process. MAVLinkInspectorController - + 5 Sec 5 Sec - + 10 Sec 10 Sec - + 30 Sec 30 Sec - + 60 Sec 60 Sec - + Auto Auto - + 10,000 10,000 - + 1,000 1,000 - + 100 100 - + 10 10 - + 1 1 - + 0.1 0.1 - + 0.01 0.01 - + 0.001 0.001 - + 0.0001 0.0001 - - - + + + System %1 System %1 @@ -9801,113 +9909,100 @@ Click Ok to start the auto-tuning process. MAVLinkProtocol - - - - - MAVLink Protocol - MAVLink Protocol - - - - - MAVLink Logging failed. Could not write to file %1, logging disabled. - MAVLink Logging failed. Could not write to file %1, logging disabled. - - - - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. - Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware. + + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - MAVLink protocol - MAVLink protocol + + Unable to save telemetry log. Application save directory is not set. + Unable to save telemetry log. Application save directory is not set. - - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. - Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. + + Unable to save telemetry log. Telemetry save directory "%1" does not exist. + Unable to save telemetry log. Telemetry save directory "%1" does not exist. MainRootWindow - + There are still active connections to vehicles. Are you sure you want to exit? There are still active connections to vehicles. Are you sure you want to exit? - + You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close? - - + + Analyze Tools Analyze Tools - - + + Vehicle Setup Vehicle Setup - - + + Application Settings Application Settings - + + Close %1 Close %1 - + You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close? - + Vehicle Error Vehicle Error - + Additional errors received Additional errors received - + %1 Version %1 Version - + Debug Touch Areas Debug Touch Areas - + Touch Area display toggled Touch Area display toggled - - + + Advanced Mode Advanced Mode - + Turn off Advanced Mode? Turn off Advanced Mode? - + Back Back @@ -10059,37 +10154,32 @@ Click Ok to start the auto-tuning process. AutoConnect - + Pixhawk Pixhawk - + SiK Radio SiK Radio - - PX4 Flow - PX4 Flow - - - + LibrePilot LibrePilot - + UDP UDP - + Zero-Conf Zero-Conf - + RTK RTK @@ -10122,17 +10212,12 @@ Click Ok to start the auto-tuning process. ft - - T - T - - - + + + - + - - @@ -10140,162 +10225,167 @@ Click Ok to start the auto-tuning process. MapSettings - + Provider Provider - + Type Type - + + Elevation Provider + Elevation Provider + + + Offline Maps Offline Maps - + Download map tiles for use when offline Download map tiles for use when offline - + Add New Set Add New Set - + Add Add - + Import Map Tiles Import Map Tiles - + Import Import - + Export Map Tiles Export Map Tiles - + Export Export - + Exporting Exporting - + Importing Importing - + Tokens Tokens - + Allows access to additional providers Allows access to additional providers - + Mapbox Mapbox - + Esri Esri - + VWorld VWorld - + Mapbox Login Mapbox Login - + Account Account - + Map Style Map Style - + Custom Map URL Custom Map URL - + URL with {x} {y} {z} or {zoom} substitutions URL with {x} {y} {z} or {zoom} substitutions - + Server URL Server URL - + Tile Cache Tile Cache - + Tile Sets (*.%1) Tile Sets (*.%1) - + Export Selected Tile Sets Export Selected Tile Sets - + Export Tiles Export Tiles - + Import TileSets Import TileSets - + Import Tiles Import Tiles - + Append to existing sets Append to existing sets - + Replace existing sets Replace existing sets - + Error Message Error Message @@ -10329,7 +10419,7 @@ Click Ok to start the auto-tuning process. MissionCommandTree - + All commands All commands @@ -10395,43 +10485,43 @@ Click Ok to start the auto-tuning process. MissionItemEditor - + ? Indicator in Plan view to show mission item is not ready for save/send ? - + Move to vehicle position Move to vehicle position - + Move to previous item position Move to previous item position - + Edit position... Edit position... - + Show all values Show all values - + Mission Edit Mission Edit - + You have made changes to the mission item which cannot be shown in Simple Mode You have made changes to the mission item which cannot be shown in Simple Mode - + Item #%1 Item #%1 @@ -10447,7 +10537,7 @@ Click Ok to start the auto-tuning process. MissionManager - + Unable to generate resume mission due to MAV_CMD_DO_JUMP command. Unable to generate resume mission due to MAV_CMD_DO_JUMP command. @@ -10593,22 +10683,9 @@ Click Ok to start the auto-tuning process. MockConfiguration - - Mock Link Settings - Mock Link Settings - - - - ModeSwitchDisplay - - - Monitor: - Monitor: - - - - Threshold: - Threshold: + + Mock Link Settings + Mock Link Settings @@ -10750,426 +10827,101 @@ Do you wish to proceed? Last preparations before launch Last preparations before launch - - - Payload - Payload - - - - Configured and started? Payload lid closed? - Configured and started? Payload lid closed? - - - - Wind & weather - Wind & weather - - - - OK for your platform? - OK for your platform? - - - - Flight area - Flight area - - - - Launch area and path free of obstacles/people? - Launch area and path free of obstacles/people? - - - - MultiVehicleList - - - The following commands will be applied to all vehicles - The following commands will be applied to all vehicles - - - - - Pause - Pause - - - - - Start Mission - Start Mission - - - - Armed - Armed - - - - Disarmed - Disarmed - - - - Arm - Arm - - - - RTL - RTL - - - - Take control - Take control - - - - MultiVehicleManager - - - Warning: A vehicle is using the same system id as %1: %2 - Warning: A vehicle is using the same system id as %1: %2 - - - - Connected to Vehicle %1 - Connected to Vehicle %1 - - - - MultiVehicleSelector - - - Vehicle - Vehicle - - - - OfflineMap - - - Error Message - Error Message - - - - Max Cache Disk Size (MB): - Max Cache Disk Size (MB): - - - - Max Cache Memory Size (MB): - Max Cache Memory Size (MB): - - - - Memory cache changes require a restart to take effect. - Memory cache changes require a restart to take effect. - - - - Mapbox Access Token - Mapbox Access Token - - - - To enable Mapbox maps, enter your access token. - To enable Mapbox maps, enter your access token. - - - - Mapbox User Name - Mapbox User Name - - - - To enable custom Mapbox styles, enter your account name. - To enable custom Mapbox styles, enter your account name. - - - - Mapbox Style ID - Mapbox Style ID - - - - To enable custom Mapbox styles, enter your style ID. - To enable custom Mapbox styles, enter your style ID. - - - - Esri Access Token - Esri Access Token - - - - To enable Esri maps, enter your access token. - To enable Esri maps, enter your access token. - - - - VWorld Access Token - VWorld Access Token - - - - To enable VWorld maps, enter your access token. - To enable VWorld maps, enter your access token. - - - - Custom Map URL - Custom Map URL - - - - URL with {x} {y} {z} or {zoom} substitutions - URL with {x} {y} {z} or {zoom} substitutions - - - - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - This will delete all tiles INCLUDING the tile sets you have created yourself. - -Is this really what you want? - - - - Delete %1 and all its tiles. - -Is this really what you want? - Delete %1 and all its tiles. - -Is this really what you want? - - - - System Wide Tile Cache - System Wide Tile Cache - - - - Zoom Levels: - Zoom Levels: - - - - Total: - Total: - - - - Unique: - Unique: - - - - Downloaded: - Downloaded: - - - - Error Count: - Error Count: - - - - Size: - Size: - - - - - Tile Count: - Tile Count: - - - - Resume Download - Resume Download - - - - Cancel Download - Cancel Download - - - - Delete - Delete - - - - Map Tile Set import Progress - Map Tile Set import Progress - - - - Map Tile Set import Completed - Map Tile Set import Completed - - - - import Tile - import Tile - - - - Confirm Delete - Confirm Delete - - - - Tile Sets (*.%1) - Tile Sets (*.%1) - - - - Ok - Ok - - - - - - Close - Close - - - - - - - Cancel - Cancel - - - - Show zoom previews - Show zoom previews - - - - Min Zoom: %1 - Min Zoom: %1 - - - - Max Zoom: %1 - Max Zoom: %1 - - - - - Add New Set - Add New Set - - - - Name: - Name: - - - - Map type: - Map type: - - - - Fetch elevation data - Fetch elevation data - - - - Min/Max Zoom Levels - Min/Max Zoom Levels + + + Payload + Payload - - Est Size: - Est Size: + + Configured and started? Payload lid closed? + Configured and started? Payload lid closed? - - Too many tiles - Too many tiles + + Wind & weather + Wind & weather - - Download - Download + + OK for your platform? + OK for your platform? - - - Import - Import + + Flight area + Flight area - - - Export - Export + + Launch area and path free of obstacles/people? + Launch area and path free of obstacles/people? + + + MultiVehicleList - - Options - Options + + The following commands will be applied to all vehicles + The following commands will be applied to all vehicles - - Offline Maps Options - Offline Maps Options + + + Pause + Pause - - Select Tile Sets to Export - Select Tile Sets to Export + + + Start Mission + Start Mission - - Select All - Select All + + Armed + Armed - - Select None - Select None + + Disarmed + Disarmed - - Export Tile Set - Export Tile Set + + Arm + Arm - - Tile Set Export Progress - Tile Set Export Progress + + RTL + RTL - - Tile Set Export Completed - Tile Set Export Completed + + Take control + Take control + + + MultiVehicleManager - - Map Tile Set Import - Map Tile Set Import + + Warning: A vehicle is using the same system id as %1: %2 + Warning: A vehicle is using the same system id as %1: %2 - - Append to existing set - Append to existing set + + Connected to Vehicle %1 + Connected to Vehicle %1 + + + MultiVehicleSelector - - Replace existing set - Replace existing set + + Vehicle + Vehicle @@ -11361,6 +11113,14 @@ Is this really what you want? Vehicle + + OpticalFlowSensor + + + Optical Flow Camera + Optical Flow Camera + + PIDTuning @@ -11441,29 +11201,29 @@ Is this really what you want? PX4BatteryIndicator - Low Battery - Low Battery + Low Battery Failsafe + Low Battery Failsafe + + + + Action + Action - + Warning Level Warning Level - - Failsafe Level - Failsafe Level + + Critical Level + Critical Level - + Emergency Level Emergency Level - - - Failsafe Action - Failsafe Action - PX4FirmwarePlugin @@ -11558,47 +11318,52 @@ Is this really what you want? Orbit - + Unknown %1:%2 Unknown %1:%2 - + Unable to takeoff, vehicle position not known. Unable to takeoff, vehicle position not known. - + Unable to go to location, vehicle position not known. Unable to go to location, vehicle position not known. - + Unable to pause vehicle. Unable to pause vehicle. - + Unable to change altitude, home position unknown. Unable to change altitude, home position unknown. - + Unable to change altitude, home position altitude unknown. Unable to change altitude, home position altitude unknown. - + + Vehicle does not support guided rotate + Vehicle does not support guided rotate + + + Unable to start mission: Vehicle rejected arming. Unable to start mission: Vehicle rejected arming. - + Unable to start mission: Vehicle not changing to %1 flight mode. Unable to start mission: Vehicle not changing to %1 flight mode. - + QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware. @@ -11727,269 +11492,241 @@ Is this really what you want? PX4FlightModeIndicator - + RTL Altitude RTL Altitude - + Land Descent Rate Land Descent Rate - - Precision Landing - Precision Landing - - - - Overall Responsiveness - Overall Responsiveness - - - - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances. - - - - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - Warning: a high responsiveness requires a vehicle with large thrust-to-weight ratio. The vehicle might lose altitude otherwise. - - - - Overall Horizontal Velocity (m/s) - Overall Horizontal Velocity (m/s) - - - - Overall Vertical Velocity (m/s) - Overall Vertical Velocity (m/s) + + GeoFence + GeoFence - - Mission Turning Radius - Mission Turning Radius + + Breach Action + Breach Action - - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. - Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking. + + Max Distance + Max Distance - - - PX4FlowSensor - - PX4Flow Camera - PX4Flow Camera + + Max Altitude + Max Altitude PX4LogTransferSettings - + MAVLink Logging MAVLink Logging - + Please enter an email address before uploading MAVLink log files. Please enter an email address before uploading MAVLink log files. - + MAVLink 2.0 Logging (PX4 Pro Only) MAVLink 2.0 Logging (PX4 Pro Only) - + Manual Start/Stop: Manual Start/Stop: - + Start Logging Start Logging - + Stop Logging Stop Logging - + Enable automatic logging Enable automatic logging - + MAVLink 2.0 Log Uploads (PX4 Pro Only) MAVLink 2.0 Log Uploads (PX4 Pro Only) - + Email address for Log Upload: Email address for Log Upload: - + Default Description: Default Description: - + Default Upload URL Default Upload URL - + Video URL: Video URL: - + Wind Speed: Wind Speed: - - + + Please Select Please Select - + Calm Calm - + Breeze Breeze - + Gale Gale - + Storm Storm - + Flight Rating: Flight Rating: - + Crashed (Pilot Error) Crashed (Pilot Error) - + Crashed (Software or Hardware issue) Crashed (Software or Hardware issue) - + Unsatisfactory Unsatisfactory - + Good Good - + Great Great - + Additional Feedback: Additional Feedback: - + Make this log publicly available Make this log publicly available - + Enable automatic log uploads Enable automatic log uploads - + Delete log file after uploading Delete log file after uploading - + Saved Log Files Saved Log Files - + Uploaded Uploaded - + Check All Check All - + Check None Check None - + Delete Selected Delete Selected - + Delete Selected Log Files Delete Selected Log Files - + Confirm deleting selected log files? Confirm deleting selected log files? - + Upload Selected Upload Selected - + Upload Selected Log Files Upload Selected Log Files - + Confirm uploading selected log files? Confirm uploading selected log files? - + Cancel Cancel - + Cancel Upload Cancel Upload - + Confirm canceling the upload process? Confirm canceling the upload process? @@ -11998,18 +11735,18 @@ Is this really what you want? PX4MainStatusIndicatorContentItem - Ground Control Data Link Loss - Ground Control Data Link Loss + Ground Control Data Link Failsafe + Ground Control Data Link Failsafe - Failsafe Action - Failsafe Action + Action + Action - - Data Link Loss Timeout - Data Link Loss Timeout + + Loss Timeout + Loss Timeout @@ -12759,78 +12496,78 @@ Is this really what you want? ParameterEditor - - Search: - Search: - - - + Clear Clear - + Show modified only Show modified only - + Tools Tools - + Refresh Refresh - + Reset all to firmware's defaults Reset all to firmware's defaults - - + + Reset All Reset All - + Reset to vehicle's configuration defaults Reset to vehicle's configuration defaults - + Load from file... Load from file... - + Load Parameters Load Parameters - + Save to file... Save to file... - + Save Parameters Save Parameters - + Clear all RC to Param Clear all RC to Param - + All Files (*) All Files (*) - + + Search + Search + + + Select Reset to reset all parameters to their defaults. Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. @@ -12839,23 +12576,23 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations. - - + + Reboot Vehicle Reboot Vehicle - + Parameter Files (*.%1) Parameter Files (*.%1) - + Select Reset to reset all parameters to the vehicle's configuration defaults. Select Reset to reset all parameters to the vehicle's configuration defaults. - + Select Ok to reboot vehicle. Select Ok to reboot vehicle. @@ -12863,12 +12600,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorController - + Unable to create file: %1 Unable to create file: %1 - + Unable to open file: %1 Unable to open file: %1 @@ -12876,72 +12613,67 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterEditorDialog - - Parameter Editor - Parameter Editor - - - + Reset To Default Reset To Default - + Min: Min: - + Max: Max: - + Default: Default: - - Parameter name: - Parameter name: + + Value Editor + Value Editor - + Vehicle reboot required after change Vehicle reboot required after change - + Application restart required after change Application restart required after change - + Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. - + Make sure you know what you are doing and double-check your values before Save! Make sure you know what you are doing and double-check your values before Save! - + Force save (dangerous!) Force save (dangerous!) - + Advanced settings Advanced settings - + Manual Entry Manual Entry - + Set RC to Param Set RC to Param @@ -12949,39 +12681,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 Parameter read failed: veh:%1 comp:%2 param:%3 - + Parameter cache CRC match failed Parameter cache CRC match failed - + Parameters not loaded since they are not currently on the vehicle: %1 Parameters not loaded since they are not currently on the vehicle: %1 - + Parameters not loaded due to type mismatch: %1 Parameters not loaded due to type mismatch: %1 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. @@ -13127,178 +12859,178 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanManager - + Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone - + Mission request list failed, maximum retries exceeded. Mission request list failed, maximum retries exceeded. - + Retrying %1 REQUEST_LIST retry Count Retrying %1 REQUEST_LIST retry Count - + Mission read failed, maximum retries exceeded. Mission read failed, maximum retries exceeded. - + Retrying %1 MISSION_REQUEST retry Count Retrying %1 MISSION_REQUEST retry Count - + Mission write failed, vehicle failed to send final ack. Mission write failed, vehicle failed to send final ack. - + Mission write mission count failed, maximum retries exceeded. Mission write mission count failed, maximum retries exceeded. - + Vehicle did not request all items from ground station: %1 Vehicle did not request all items from ground station: %1 - + Mission remove all, maximum retries exceeded. Mission remove all, maximum retries exceeded. - + Retrying %1 MISSION_CLEAR_ALL retry Count Retrying %1 MISSION_CLEAR_ALL retry Count - + Vehicle did not respond to mission item communication: %1 Vehicle did not respond to mission item communication: %1 - + Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read - + Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed. - + Vehicle remove all failed. Error: %1 Vehicle remove all failed. Error: %1 - + Item #%1 Command: %2 Item #%1 Command: %2 - + Frame: %1 Frame: %1 - - - - - - - + + + + + + + Value: %1 Value: %1 - + Mission accepted. Mission accepted. - + Unspecified error. Unspecified error. - + Coordinate frame is not supported. Coordinate frame is not supported. - + Command is not supported. Command is not supported. - + Mission item exceeds storage space. Mission item exceeds storage space. - + One of the parameters has an invalid value. One of the parameters has an invalid value. - + Param 1 invalid value. Param 1 invalid value. - + Param 2 invalid value. Param 2 invalid value. - + Param 3 invalid value. Param 3 invalid value. - + Param 4 invalid value. Param 4 invalid value. - + Param 5 invalid value. Param 5 invalid value. - + Param 6 invalid value. Param 6 invalid value. - + Param 7 invalid value. Param 7 invalid value. - + Received mission item out of sequence. Received mission item out of sequence. - + Not accepting any mission commands. Not accepting any mission commands. - + Unknown error: %1. Unknown error: %1. - + Vehicle returned error: %1. %2Vehicle did not accept guided item. Vehicle returned error: %1. %2Vehicle did not accept guided item. @@ -13350,27 +13082,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al PlanToolBarIndicators - + Selected Waypoint Selected Waypoint - + Alt diff: Alt diff: - + Azimuth: Azimuth: - + Distance: Distance: - + Gradient: Gradient: @@ -13386,47 +13118,47 @@ Note that this will also completely reset everything, including UAVCAN nodes, al N/A - + Dist prev WP: Dist prev WP: - + Heading: Heading: - + Total Mission Total Mission - + Max telem dist: Max telem dist: - + Time: Time: - + Battery Battery - + Batteries required: Batteries required: - + Upload Required Upload Required - + Upload Upload @@ -13439,122 +13171,122 @@ Note that this will also completely reset everything, including UAVCAN nodes, al Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + You need at least one item to create a KML. You need at least one item to create a KML. - + Plan is waiting on terrain data from server for correct altitude values. Plan is waiting on terrain data from server for correct altitude values. - + Plan Upload Plan Upload - + Select Plan File Select Plan File - + Save Plan Save Plan - + Save KML Save KML - + File File - + Waypoint Waypoint - + ROI ROI - + Pattern Pattern - + Center Center - + Plan Plan - + Apply new altitude Apply new altitude - + Plan View - Vehicle Disconnected Plan View - Vehicle Disconnected - + Plan View - Vehicle Changed Plan View - Vehicle Changed - + The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan? - + The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan? - + Discard Unsaved Changes Discard Unsaved Changes - + Discard Unsaved Changes, Load New Plan From Vehicle Discard Unsaved Changes, Load New Plan From Vehicle - + Load New Plan From Vehicle Load New Plan From Vehicle - + Keep Current Plan Keep Current Plan - + Keep Current Plan, Don't Update From Vehicle Keep Current Plan, Don't Update From Vehicle - + This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type. Click 'Ok' to upload the Plan anyway. @@ -13563,191 +13295,181 @@ Click 'Ok' to upload the Plan anyway. Click 'Ok' to upload the Plan anyway. - + Send To Vehicle Send To Vehicle - + Current mission must be paused prior to uploading a new Plan Current mission must be paused prior to uploading a new Plan - + Fly Fly - + Takeoff Takeoff - + Rally Point Rally Point - + Cancel ROI Cancel ROI - + Return Return - + Land Land - - + + Mission Mission - + Fence Fence - - + + Rally Rally - + UTM-Adapter UTM-Adapter - + Powered by %1 Powered by %1 - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - - Status - Status - - - - Status Error - Status Error - - - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - - + + Clear Clear - + Are you sure you want to remove all mission items and clear the mission from the vehicle? Are you sure you want to remove all mission items and clear the mission from the vehicle? - + Create complex pattern: Create complex pattern: - + You have unsaved changes. You have unsaved changes. - + Open... Open... - - - + + + Save Save - - + + Unable to %1 Unable to %1 - + Plan has incomplete items. Complete all items and %1 again. Plan has incomplete items. Complete all items and %1 again. - + Are you sure you want to remove current plan and create a new plan? Are you sure you want to remove current plan and create a new plan? - + Plan overwrite Plan overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file. You have unsaved changes. You should upload to your vehicle, or save to a file. - - + + Create Plan Create Plan - + Storage Storage - + Save As... Save As... - + Save Mission Waypoints As KML... Save Mission Waypoints As KML... - + KML KML - - - + + + Upload Upload - + Vehicle Vehicle - + Download Download @@ -13793,34 +13515,6 @@ Click 'Ok' to upload the Plan anyway. Click anywhere to hide - - PolygonEditor - - - Click to add point %1 - Click to add point %1 - - - - - Right Click to end polygon - - Right Click to end polygon - - - - Click to add point - Click to add point - - - - Click to add point - Right Click to end polygon - Click to add point - Right Click to end polygon - - - - Adjust polygon by dragging corners - Adjust polygon by dragging corners - - PowerComponent @@ -14375,44 +14069,37 @@ Click 'Ok' to upload the Plan anyway. QGCApplication - + The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre> - + The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. The format for %1 saved settings has been modified. Your saved settings have been reset to defaults. - - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - - - + Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1 - + There is a newer version of %1 available. You can download it from %2. There is a newer version of %1 available. You can download it from %2. - + New Version Available New Version Available + + + QGCCacheWorker - - Unable to save telemetry log. Application save directory is not set. - Unable to save telemetry log. Application save directory is not set. - - - - Unable to save telemetry log. Telemetry save directory "%1" does not exist. - Unable to save telemetry log. Telemetry save directory "%1" does not exist. + + Database Not Initialized + Database Not Initialized @@ -14426,32 +14113,32 @@ Click 'Ok' to upload the Plan anyway. QGCCorePlugin - + Vibration Vibration - + Log Download Log Download - + GeoTag Images GeoTag Images - + MAVLink Console MAVLink Console - + MAVLink Inspector MAVLink Inspector - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -14509,178 +14196,170 @@ Click 'Ok' to upload the Plan anyway. QGCFileDownload - + Unabled to find writable download location. Tried downloads and temp directory. Unabled to find writable download location. Tried downloads and temp directory. - + Could not save downloaded file to %1. Error: %2 Could not save downloaded file to %1. Error: %2 - + Download cancelled Download cancelled - + Error: File Not Found Error: File Not Found - + Error during download. Error: %1 Error during download. Error: %1 - - QGCLogEntry - - - Pending - Pending - - QGCMAVLink - + Generic micro air vehicle Generic micro air vehicle - + Fixed wing aircraft Fixed wing aircraft - + Quadrotor Quadrotor - + Coaxial helicopter Coaxial helicopter - + Normal helicopter with tail rotor. Normal helicopter with tail rotor. - + Ground installation Ground installation - + Operator control unit / ground control station Operator control unit / ground control station - + Airship, controlled Airship, controlled - + Free balloon, uncontrolled Free balloon, uncontrolled - + Rocket Rocket - + Ground rover Ground rover - + Surface vessel, boat, ship Surface vessel, boat, ship - + Submarine Submarine - + Hexarotor Hexarotor - + Octorotor Octorotor - + trirotor trirotor - + Flapping wing Flapping wing - + Kite Kite - + Onboard companion controller Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL Tiltrotor VTOL - + VTOL Fixedrotor VTOL Fixedrotor - + VTOL Tailsitter VTOL Tailsitter - + VTOL Tiltwing VTOL Tiltwing - + VTOL reserved 5 VTOL reserved 5 - + Onboard gimbal Onboard gimbal - + Onboard ADSB peripheral Onboard ADSB peripheral @@ -14688,24 +14367,16 @@ Click 'Ok' to upload the Plan anyway. QGCMAVLinkSystem - + Comp All Comp All - + Comp %1 Comp %1 - - QGCMapEngine - - - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. - - QGCMapPolygonVisuals @@ -14834,83 +14505,83 @@ Click 'Ok' to upload the Plan anyway. QGCPopupDialog - + Ok Ok - - + + Open Open - + Save Save - + Apply Apply - + Save All Save All - + Yes Yes - + Yes to All Yes to All - + Retry Retry - + Reset Reset - + Restore to Defaults Restore to Defaults - + Ignore Ignore - + Cancel Cancel - + Close Close - + No No - + No to All No to All - + Abort Abort @@ -14918,60 +14589,116 @@ Click 'Ok' to upload the Plan anyway. QGCTextField - + ? ? + + QGeoFileTileCacheQGC + + + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + The Offline Map Cache database has been upgraded. Your old map cache sets have been reset. + + + + QGeoTiledMapReplyQGC + + + Unexpected Error + Unexpected Error + + + + Empty Reply + Empty Reply + + + + Image is Empty + Image is Empty + + + + Bing Tile Above Zoom Level + Bing Tile Above Zoom Level + + + + Failed to Serialize Terrain Tile + Failed to Serialize Terrain Tile + + + + Unknown Format + Unknown Format + + + + Invalid Reply + Invalid Reply + + + + Invalid Cache Tile + Invalid Cache Tile + + + + Network Not Available + Network Not Available + + QGroundControlQmlGlobal - + 32 bit 32 bit - + 64 bit 64 bit - + (AMSL) (AMSL) - + (CalcT) (CalcT) - + AMSL AMSL - + Calc Above Terrain Calc Above Terrain - + Mixed Modes Mixed Modes - + (TerrF) (TerrF) - + Relative To Launch Relative To Launch - + Terrain Frame Terrain Frame @@ -14979,46 +14706,11 @@ Click 'Ok' to upload the Plan anyway. QObject - - Unknown - Unknown - - - - Pixhawk - Pixhawk - - - - SiK Radio - SiK Radio - - - - PX4 Flow - PX4 Flow - - - - OpenPilot - OpenPilot - - - - RTK GPS - RTK GPS - - - - + + Guided mode not supported by Vehicle. Guided mode not supported by Vehicle. - - - Follow Me - Follow Me - The following required keys are missing: %1 @@ -15102,25 +14794,14 @@ Click 'Ok' to upload the Plan anyway. RCRSSIIndicator - + RC RSSI Status RC RSSI Status - - RC RSSI Data Unavailable - RC RSSI Data Unavailable - - - - N/A - No data available - N/A - - - - RSSI: - RSSI: + + RSSI + RSSI @@ -15208,8 +14889,19 @@ Click 'Ok' to upload the Plan anyway. Select the specific receiver type below: Select the specific receiver type below: + + + + CRSF Bind + CRSF Bind + + Click Ok to place your CRSF receiver in the bind mode. + Click Ok to place your CRSF receiver in the bind mode. + + + Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero. @@ -15325,18 +15017,18 @@ Click 'Ok' to upload the Plan anyway. Spektrum Bind - - + + Copy Trims Copy Trims - + Mode 1 Mode 1 - + Mode 2 Mode 2 @@ -15442,17 +15134,17 @@ Please ensure all motor power is disconnected from the vehicle. Click Next to continue - + Next Next - + Calibrate Calibrate - + The current calibration settings are now displayed for each channel on screen. Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values. @@ -15464,12 +15156,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RallyPointController - + Rally: %1 Rally: %1 - + Rally Points supports version %1 Rally Points supports version %1 @@ -15512,192 +15204,213 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap RemoteIDIndicatorPage - + RemoteID Status RemoteID Status - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - + EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel EMERGENCY HAS BEEN DECLARED, Press and Hold for 3 seconds to cancel - + Press and Hold below button to declare emergency Press and Hold below button to declare emergency - + Clear Emergency Clear Emergency - + EMERGENCY EMERGENCY + + + Arm Status Error + Arm Status Error + + + + Self ID + Self ID + + + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + + + + Broadcast + Broadcast + + + + Broadcast Message + Broadcast Message + + + + Remote ID + Remote ID + + + + Configure + Configure + RemoteIDSettings - - + ARM STATUS ARM STATUS - + RID COMMS RID COMMS - + NOT CONNECTED NOT CONNECTED - + GCS GPS GCS GPS - - + BASIC ID BASIC ID - + OPERATOR ID OPERATOR ID - - Arm status error: - Arm status error: - - - - Region - Region - - - - GPS GCS - GPS GCS + + Arm Status Error + Arm Status Error - - Latitude Fixed(-90 to 90) - Latitude Fixed(-90 to 90) + + Basic ID + Basic ID - - Longitude Fixed(-180 to 180) - Longitude Fixed(-180 to 180) + + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 + If Basic ID is already set on the RID device, this will be registered as Basic ID 2 - - Altitude Fixed - Altitude Fixed + + + Broadcast + Broadcast - - Latitude - Latitude - - - - Longitude - Longitude + + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. + If an emergency is declared, Emergency Text will be broadcast even if Broadcast setting is not enabled. - - - Altitude - Altitude + + Broadcast Message + Broadcast Message - - - - (Mandatory) - (Mandatory) + + GroundStation Location + GroundStation Location - - Heading - Heading + + EU Vehicle Info + EU Vehicle Info - - Hor. Accuracy - Hor. Accuracy + + Provide Information + Provide Information - + NMEA External GPS Device NMEA External GPS Device - + NMEA GPS Baudrate NMEA GPS Baudrate - + NMEA stream UDP port NMEA stream UDP port - - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - Note: This parameter is optional if Basic ID is already set on RID device. On that case, this one will be registered as Basic ID 2 - - - + Operator ID Operator ID - - Self ID - Self ID + + Broadcast%1 + Broadcast%1 + + + + (%1) + (%1) - - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent - Note: Even if this box is unset, QGroundControl will send self ID message if an emergency is set, or after it has been cleared. The message for each kind of selfID is saved and preserves reboots. Select each type on the Self ID type dropdown to configure the message to be sent + + Invalid Operator ID + Invalid Operator ID + + + + Self ID + Self ID @@ -16559,7 +16272,7 @@ ROTATION_NONE indicates component points in direction of flight. SerialConfiguration - + Serial Link Settings Serial Link Settings @@ -16567,24 +16280,14 @@ ROTATION_NONE indicates component points in direction of flight. SerialLink - - Could not send data - link %1 is disconnected! - Could not send data - link %1 is disconnected! - - - - Error connecting: Could not create port. %1 - Error connecting: Could not create port. %1 - - - - Could not read data - link %1 is disconnected! - Could not read data - link %1 is disconnected! + + Serial Link Error + Serial Link Error - - Link Error - Link Error + + Link %1: (Port: %2) %3 + Link %1: (Port: %2) %3 @@ -16650,6 +16353,44 @@ ROTATION_NONE indicates component points in direction of flight. Stop Bits + + SerialWorker + + + Not connecting to a bootloader + Not connecting to a bootloader + + + + Could not open port: %1 + Could not open port: %1 + + + + Data to Send is Empty + Data to Send is Empty + + + + Port is not Connected + Port is not Connected + + + + Port is not Writable + Port is not Writable + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes + + SettingsPagesModel @@ -16769,57 +16510,57 @@ ROTATION_NONE indicates component points in direction of flight. missing message panel text - + %1 setup must be completed prior to %2 setup. %1 setup must be completed prior to %2 setup. - + %1 does not currently support setup of your vehicle type. %1 does not currently support setup of your vehicle type. - + Vehicle settings and info will display after connecting your vehicle. Vehicle settings and info will display after connecting your vehicle. - + You are currently connected to a vehicle but it did not return the full parameter list. You are currently connected to a vehicle but it did not return the full parameter list. - + As a result, the full set of vehicle setup options are not available. As a result, the full set of vehicle setup options are not available. - + Summary Summary - + Firmware Firmware - - PX4Flow - PX4Flow + + Optical Flow + Optical Flow - + Joystick Joystick - + Buttons Buttons - + Parameters Parameters @@ -16943,42 +16684,42 @@ ROTATION_NONE indicates component points in direction of flight. SimpleMissionItem - + Unknown: %1 Unknown: %1 - + L L - + Takeoff Takeoff - + Land Land - + Transition Direction Transition Direction - + VTOL Land VTOL Land - + ROI ROI - + Loiter Loiter @@ -16994,7 +16735,7 @@ ROTATION_NONE indicates component points in direction of flight. StandardModes - + Unknown %2 Unknown %2 @@ -17002,47 +16743,47 @@ ROTATION_NONE indicates component points in direction of flight. StatusTextHandler - + EMERGENCY EMERGENCY - + ALERT ALERT - + Critical Critical - + Error Error - + Warning Warning - + Notice Notice - + Info Info - + Debug Debug - + ... Indicates missing chunk from chunked STATUS_TEXT ... @@ -17399,7 +17140,7 @@ ROTATION_NONE indicates component points in direction of flight. TCPConfiguration - + TCP Link Settings TCP Link Settings @@ -17407,20 +17148,42 @@ ROTATION_NONE indicates component points in direction of flight. TCPLink - - - Link Error - Link Error + + TCP Link Error + TCP Link Error + + + + Link %1: (Host: %2 Port: %3) %4 + Link %1: (Host: %2 Port: %3) %4 + + + + TCPWorker + + + Connection Failed: %1 + Connection Failed: %1 - - Error on link %1. Connection failed - Error on link %1. Connection failed + + Data to Send is Empty + Data to Send is Empty - - Error on link %1. Error on socket: %2. - Error on link %1. Error on socket: %2. + + Socket is not connected + Socket is not connected + + + + Could Not Send Data - Write Failed: %1 + Could Not Send Data - Write Failed: %1 + + + + Could Not Send Data - Write Returned 0 Bytes + Could Not Send Data - Write Returned 0 Bytes @@ -17455,48 +17218,48 @@ ROTATION_NONE indicates component points in direction of flight. TelemetryRSSIIndicator - + Telemetry RSSI Status Telemetry RSSI Status - + Local RSSI: Local RSSI: - - + + dBm dBm - + Remote RSSI: Remote RSSI: - + RX Errors: RX Errors: - + Errors Fixed: Errors Fixed: - + TX Buffer: TX Buffer: - + Local Noise: Local Noise: - + Remote Noise: Remote Noise: @@ -17688,7 +17451,7 @@ ROTATION_NONE indicates component points in direction of flight. ToolIndicatorPage - + Waiting for parameters... Waiting for parameters... @@ -17856,7 +17619,7 @@ ROTATION_NONE indicates component points in direction of flight. UDPConfiguration - + UDP Link Settings UDP Link Settings @@ -17864,123 +17627,160 @@ ROTATION_NONE indicates component points in direction of flight. UDPLink - - + UDP Link Error UDP Link Error - - Error binding UDP port: %1 - Error binding UDP port: %1 + + Link %1: %2 + Link %1: %2 + + + + UDPWorker + + + Failed to bind UDP socket to port + Failed to bind UDP socket to port + + + + Could Not Send Data - Link is Disconnected! + Could Not Send Data - Link is Disconnected! - - Error registering Zeroconf - Error registering Zeroconf + + Could Not Read Data - Link is Disconnected! + Could Not Read Data - Link is Disconnected! + + + + Could Not Read Data - No Data Available! + Could Not Read Data - No Data Available! + + + + Zeroconf Register Error: %1 + Zeroconf Register Error: %1 + + + + Error Registering Zeroconf: %1 + Error Registering Zeroconf: %1 + + + + Invalid sockfd + Invalid sockfd + + + + DNSServiceProcessResult Error: %1 + DNSServiceProcessResult Error: %1 UTMSPAdapterEditor - + UTM Service Editor UTM Service Editor - - + + Enabled Enabled - - + + Disabled Disabled - + + Logout + Logout + + + User ID User ID - + Password: Password: - + Login Login - + Forgot Your Password? Forgot Your Password? - + New User? Register Now New User? Register Now - + Insert Geofence Insert Geofence - + Min Altitude Min Altitude - + Max Altitude Max Altitude - - Delete - Delete - - - + Date & Time Date & Time - + Date Date - + Time Time - + Start Time Start Time - + End Time End Time - + Mission Altitude Mission Altitude - + Register Flight Plan Register Flight Plan - + Remove Flight Plan Remove Flight Plan @@ -18100,22 +17900,22 @@ ROTATION_NONE indicates component points in direction of flight. Temperature - + Choose the measurement units you want to use. You can also change it later in General Settings. Choose the measurement units you want to use. You can also change it later in General Settings. - + System of units System of units - + Metric System Metric System - + Imperial System Imperial System @@ -18321,7 +18121,7 @@ ROTATION_NONE indicates component points in direction of flight. VTOL Landing - + %1 complex item version %2 not supported %1 complex item version %2 not supported @@ -18349,78 +18149,78 @@ ROTATION_NONE indicates component points in direction of flight. Use loiter to altitude - - + + Altitude Altitude - + Radius Radius - + Loiter clockwise Loiter clockwise - + Landing point Landing point - + Heading Heading - + Landing Dist Landing Dist - + Altitudes relative to launch Altitudes relative to launch - + Camera Camera - + * Actual flight path will vary. * Actual flight path will vary. - + * Avoid tailwind on approach to land. * Avoid tailwind on approach to land. - + * Ensure landing distance is enough to complete transition. * Ensure landing distance is enough to complete transition. - + Click in map to set landing point. Click in map to set landing point. - + - or - - or - - + Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point. - + Done Done @@ -18428,183 +18228,165 @@ ROTATION_NONE indicates component points in direction of flight. VTOLLandingPatternMapVisual - + Loiter Loiter - + Approach Approach - + Land Land - - VTOLModeIndicator - - - VTOL: FW - VTOL: FW - - - - VTOL: MR - VTOL: MR - - - - VTOL: Fixed Wing - VTOL: Fixed Wing - - - - VTOL: Multi-Rotor - VTOL: Multi-Rotor - - Vehicle - + Mission transfer failed. Error: %1 Mission transfer failed. Error: %1 - + GeoFence transfer failed. Error: %1 GeoFence transfer failed. Error: %1 - + Rally Point transfer failed. Error: %1 Rally Point transfer failed. Error: %1 - + battery %1 level low battery %1 level low - + battery %1 level is critical battery %1 level is critical - + battery %1 level emergency battery %1 level emergency - + battery %1 failed battery %1 failed - + battery %1 unhealthy battery %1 unhealthy - + warning warning - + Set Home failed, terrain data not available for selected coordinate Set Home failed, terrain data not available for selected coordinate - + minimum altitude minimum altitude - + maximum altitude maximum altitude - + boundary boundary - + fence breached fence breached - + Vehicle %1 Vehicle %1 - + Vehicle reboot failed. Vehicle reboot failed. - + %1 %2 flight mode %1 %2 flight mode - + armed armed - + disarmed disarmed - + + Change Heading not supported by Vehicle. + Change Heading not supported by Vehicle. + + + Unable to send command: %1. Unable to send command: %1. - + Internal error - MAV_COMP_ID_ALL not supported Internal error - MAV_COMP_ID_ALL not supported - + Waiting on previous response to same command. Waiting on previous response to same command. - + Vehicle did not respond to command: %1 Vehicle did not respond to command: %1 - + Bootloader flash succeeded Bootloader flash succeeded - + %1 command temporarily rejected %1 command temporarily rejected - + %1 command denied %1 command denied - + %1 command not supported %1 command not supported - + %1 command failed %1 command failed @@ -18612,42 +18394,42 @@ ROTATION_NONE indicates component points in direction of flight. Vehicle Class - + Airship Airship - + Fixed Wing Fixed Wing - + Rover-Boat Rover-Boat - + Sub Sub - + Multi-Rotor Multi-Rotor - + VTOL VTOL - + Generic Generic - + Unknown Unknown @@ -18655,49 +18437,49 @@ ROTATION_NONE indicates component points in direction of flight. VehicleLinkManager - + %1Communication regained on %2 link %1Communication regained on %2 link - - + + primary primary - - + + secondary secondary - + %1Communication regained %1Communication regained - + %1Switching communication to new primary link %1Switching communication to new primary link - + %1Communication lost on %2 link. %1Communication lost on %2 link. - + %1Switching communication to secondary link. %1Switching communication to secondary link. - + %1Communication lost %1Communication lost - + Comm Lost Comm Lost @@ -18805,22 +18587,17 @@ ROTATION_NONE indicates component points in direction of flight. VideoManager - - Video receiver is not ready. - Video receiver is not ready. - - - + Invalid video format defined. Invalid video format defined. - + Unabled to record video. Video save path must be specified in Settings. Unabled to record video. Video save path must be specified in Settings. - + Restart application for changes to take effect. Restart application for changes to take effect. @@ -18828,142 +18605,142 @@ ROTATION_NONE indicates component points in direction of flight. VideoSettings - + No Video Available No Video Available - + Video Stream Disabled Video Stream Disabled - + RTSP Video Stream RTSP Video Stream - + UDP h.264 Video Stream UDP h.264 Video Stream - + UDP h.265 Video Stream UDP h.265 Video Stream - + TCP-MPEG2 Video Stream TCP-MPEG2 Video Stream - + MPEG-TS (h.264) Video Stream MPEG-TS (h.264) Video Stream - + 3DR Solo (requires restart) 3DR Solo (requires restart) - + Parrot Discovery Parrot Discovery - + Yuneec Mantis G Yuneec Mantis G - + Herelink AirUnit Herelink AirUnit - + Herelink Hotspot Herelink Hotspot - + Video Source Video Source - + Mavlink camera stream is automatically configured Mavlink camera stream is automatically configured - + Source Source - + Connection Connection - + RTSP URL RTSP URL - + TCP URL TCP URL - + UDP Port UDP Port - + Settings Settings - + Aspect Ratio Aspect Ratio - + Stop recording when disarmed Stop recording when disarmed - + Low Latency Mode Low Latency Mode - + Video decode priority Video decode priority - + Local Video Storage Local Video Storage - + Record File Format Record File Format - + Auto-Delete Saved Recordings Auto-Delete Saved Recordings - + Max Storage Usage Max Storage Usage