From 1182bd6cd7a50d1280c4ba79c5c6086e2ebf1b78 Mon Sep 17 00:00:00 2001
From: martin2250 <martinp2250@gmail.com>
Date: Sat, 1 Sep 2018 11:40:54 +0200
Subject: [PATCH] added some tooltips to settings

---
 OpenCNCPilot/SettingsWindow.xaml | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/OpenCNCPilot/SettingsWindow.xaml b/OpenCNCPilot/SettingsWindow.xaml
index 008265a..48ea6fc 100644
--- a/OpenCNCPilot/SettingsWindow.xaml
+++ b/OpenCNCPilot/SettingsWindow.xaml
@@ -41,13 +41,13 @@
         <TabItem Header="Viewport">
             <Grid>
                 <TextBox Margin="10,10,0,0" Text="{util:SettingBinding ViewportArcSplit}"/>
-                <Label Content="preview arc segment length (mm)" HorizontalAlignment="Left" Margin="135,9,0,0" VerticalAlignment="Top"/>
+                <Label Content="preview arc segment length (mm)" HorizontalAlignment="Left" Margin="135,9,0,0" VerticalAlignment="Top" Height="26" Width="188"/>
 
                 <TextBox Margin="10,38,0,0" Text="{util:SettingBinding HeightMapOpacity}"/>
-                <Label Content="height map opacity (0.0 - 1.0)" HorizontalAlignment="Left" Margin="135,37,0,0" VerticalAlignment="Top"/>
+                <Label Content="height map opacity (0.0 - 1.0)" HorizontalAlignment="Left" Margin="135,37,0,0" VerticalAlignment="Top" Height="26" Width="165"/>
 
-                <CheckBox Content="Preview Toolpath" HorizontalAlignment="Left" Margin="116,80,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding EnableCodePreview}"/>
-                <CheckBox Content="Send Soft Reset on Escape Key press" HorizontalAlignment="Left" Margin="116,100,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding EnableEscapeSoftReset}"/>
+                <CheckBox Content="Preview Toolpath" HorizontalAlignment="Left" Margin="116,80,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding EnableCodePreview}" Height="15" Width="110"/>
+                <CheckBox Content="Send Soft Reset on Escape Key press" HorizontalAlignment="Left" Margin="116,100,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding EnableEscapeSoftReset}" Height="15" Width="213"/>
             </Grid>
         </TabItem>
 
@@ -68,17 +68,17 @@
                 <Label Content="Max Depth (mm)" HorizontalAlignment="Left" Margin="135,116,0,0" VerticalAlignment="Top"/>
 
                 <TextBox Margin="10,145,0,0" Text="{util:SettingBinding ProbeXAxisWeight}"/>
-                <Label Content="Probe X-Axis Weight" HorizontalAlignment="Left" Margin="135,144,0,0" VerticalAlignment="Top"/>
+                <Label Content="Probe X-Axis Weight" HorizontalAlignment="Left" Margin="135,144,0,0" VerticalAlignment="Top" ToolTip="Use this value to tell OpenCNCPilot to prefer to move X or Y preferably when probing. This is useful if one of both axes is lighter or faster than the other. Values smaller or greater than 1.0 change the preferred axis, 1.0 means no preferred axis."/>
 
-                <CheckBox Content="Auto-Backup HeightMap when complete" HorizontalAlignment="Left" Margin="116,175,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding BackupHeightMap}"/>
+                <CheckBox Content="Auto-Backup HeightMap when complete" HorizontalAlignment="Left" Margin="116,175,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding BackupHeightMap}" ToolTip="Backups are stored in the same folder as OpenCNCPilot.exe"/>
             </Grid>
         </TabItem>
 
         <TabItem Header="GCode">
             <Grid>
-                <CheckBox Content="Include Spindle 'S' Commands" HorizontalAlignment="Left" Margin="116,10,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding GCodeIncludeSpindle}"/>
-                <CheckBox Content="Include Dwell 'G4' Commands" HorizontalAlignment="Left" Margin="116,30,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding GCodeIncludeDwell}"/>
-                <CheckBox Content="Include Program End (M2, M30)" HorizontalAlignment="Left" Margin="116,50,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding GCodeIncludeMEnd}"/>
+                <CheckBox Content="Include Spindle 'S' Commands" HorizontalAlignment="Left" Margin="116,10,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding GCodeIncludeSpindle}" ToolTip="Strip S[XX] from file before sending to machine if not checked"/>
+                <CheckBox Content="Include Dwell 'G4' Commands" HorizontalAlignment="Left" Margin="116,30,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding GCodeIncludeDwell}" ToolTip="Strip G4 P[XX] from file before sending to machine if not checked"/>
+                <CheckBox Content="Include Program End (M2, M30)" HorizontalAlignment="Left" Margin="116,50,0,0" VerticalAlignment="Top" IsChecked="{util:SettingBinding GCodeIncludeMEnd}" ToolTip="Strip M2/M30 from file before sending to machine if not checked. Default is off since these commands reset offsets from G92."/>
             </Grid>
         </TabItem>
     </TabControl>