Async_HttpBasicAuth.ino

/****************************************************************************************************************************
  Async_HttpBasicAuth.ino

  For ENC28J60 Ethernet in ESP32 (ESP32 + ENC28J60)

  AsyncWebServer_ESP32_ENC is a library for the Ethernet ENC28J60 in ESSP32 to run AsyncWebServer

  Based on and modified from ESPAsyncWebServer (https://github.com/me-no-dev/ESPAsyncWebServer)
  Built by Khoi Hoang https://github.com/khoih-prog/AsyncWebServer_ESP32_ENC
  Licensed under GPLv3 license
 *****************************************************************************************************************************/

#if !( defined(ESP32) )
  #error This code is designed for (ESP32 + ENC28J60) to run on ESP32 platform! Please check your Tools->Board setting.
#endif

#include <Arduino.h>

#define _ASYNC_WEBSERVER_LOGLEVEL_       4

// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC      20

byte mac[][NUMBER_OF_MAC] =
{
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 },
};

// Select the IP address according to your local network
IPAddress myIP(192, 168, 2, 232);
IPAddress myGW(192, 168, 2, 1);
IPAddress mySN(255, 255, 255, 0);

// Google DNS Server IP
IPAddress myDNS(8, 8, 8, 8);

//////////////////////////////////////////////////////////

// Optional values to override default settings
//#define SPI_HOST            1
//#define SPI_CLOCK_MHZ       8

// Must connect INT to GPIOxx or not working
//#define INT_GPIO            4

//#define MISO_GPIO           19
//#define MOSI_GPIO           23
//#define SCK_GPIO            18
//#define CS_GPIO             5
// Optional values to override default settings

//////////////////////////////////////////////////////////

#include <AsyncWebServer_ESP32_ENC.h>

AsyncWebServer    server(80);

const char* www_username = "admin";
const char* www_password = "esp32_enc28j60";

void setup()
{
	Serial.begin(115200);

	while (!Serial && millis() < 5000);

	delay(200);

	Serial.print("\nStart Async_HTTPBasicAuth on ");
	Serial.print(ARDUINO_BOARD);
  Serial.print(" with ");
  Serial.println(SHIELD_TYPE);
  Serial.println(ASYNC_WEBSERVER_ESP32_ENC_VERSION);

  AWS_LOGWARN(F("Default SPI pinout:"));
  AWS_LOGWARN1(F("MOSI:"), MOSI_GPIO);
  AWS_LOGWARN1(F("MISO:"), MISO_GPIO);
  AWS_LOGWARN1(F("SCK:"),  SCK_GPIO);
  AWS_LOGWARN1(F("CS:"),   CS_GPIO);
  AWS_LOGWARN1(F("INT:"),  INT_GPIO);
  AWS_LOGWARN1(F("SPI Clock (MHz):"), SPI_CLOCK_MHZ);
  AWS_LOGWARN(F("========================="));

  ///////////////////////////////////

  // To be called before ETH.begin()
  ESP32_ENC_onEvent();

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  uint16_t index = millis() % NUMBER_OF_MAC;

  //bool begin(int MISO_GPIO, int MOSI_GPIO, int SCLK_GPIO, int CS_GPIO, int INT_GPIO, int SPI_CLOCK_MHZ,
  //           int SPI_HOST, uint8_t *ENC28J60_Mac = ENC28J60_Default_Mac);
  //ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, SPI_HOST );
  ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, SPI_HOST, mac[index] );

  // Static IP, leave without this line to get IP via DHCP
  //bool config(IPAddress local_ip, IPAddress gateway, IPAddress subnet, IPAddress dns1 = 0, IPAddress dns2 = 0);
  //ETH.config(myIP, myGW, mySN, myDNS);

  ESP32_ENC_waitForConnect();

  ///////////////////////////////////

	server.on("/", HTTP_GET, [](AsyncWebServerRequest * request)
	{
		if (!request->authenticate(www_username, www_password))
		{
			return request->requestAuthentication();
		}

		request->send(200, "text/plain", "Login OK");
	});

	server.begin();

	Serial.print(F("Async_HttpBasicAuth started @ IP : "));
	Serial.println(ETH.localIP());

	Serial.print(F("Open http://"));
	Serial.print(ETH.localIP());
	Serial.println(F("/ in your browser to see it working"));

	Serial.print(F("Login using username = "));
	Serial.print(www_username);
	Serial.print(F(" and password = "));
	Serial.println(www_password);
}

void heartBeatPrint()
{
	static int num = 1;

	Serial.print(F("."));

	if (num == 80)
	{
		Serial.println();
		num = 1;
	}
	else if (num++ % 10 == 0)
	{
		Serial.print(F(" "));
	}
}

void check_status()
{
	static unsigned long checkstatus_timeout = 0;

#define STATUS_CHECK_INTERVAL     10000L

	// Send status report every STATUS_REPORT_INTERVAL (60) seconds: we don't need to send updates frequently if there is no status change.
	if ((millis() > checkstatus_timeout) || (checkstatus_timeout == 0))
	{
		heartBeatPrint();
		checkstatus_timeout = millis() + STATUS_CHECK_INTERVAL;
	}
}

void loop()
{
	check_status();
}