Doc update

Author: Gissio

docs/devices/FNIRSI GC-01/install.md

@@ -70,7 +70,7 @@ The keys are mapped as follows:
 
 ### FNIRSI GC-01 with a CH32F103R8 (WCH) microprocessor
 
-On the FNIRSI GC-01 with a CH32F103R8 microprocessor, you must enable “Data mode” in the Settings to establish a USB data connection. To save power, disable “Data mode” when you are finished.
+On the FNIRSI GC-01 with a CH32F103R8 microprocessor, you must enable “Data mode” in the settings to establish a USB data connection. To save power, disable “Data mode” when you are finished.
 
 Data logging can store up to 7091 data points. At normal radiation levels (20 cpm), this allows for 147 days of data at 60-minute intervals, 24 days at 10-minute intervals, 4 days at 1-minute intervals, 19 hours at 10-second intervals and almost 2 hours at 1-second intervals.
 

docs/users.md

@@ -86,6 +86,8 @@ Rad Pro lets you log cumulative dose count, from which both rate and dose can be
 
 To start logging, ensure that the time zone, date and time of your device are correctly set, and enable data logging in the settings. Data is automatically logged in the background. When the memory becomes full, older data is overwritten.
 
+To establish a USB data connection, some devices require enabling “Data mode” in the settings. To save power, disable “Data mode” when you are finished.
+
 To download the data logs or log data live to a computer, use the [GeigerLog](https://github.com/Gissio/geigerlog-radpro) data logging software. “CPS” data is the low-level counts per second value. To average the data, use the “MvAvg” function.
 
 Please note that data is not logged during the download process.