A MQTT to BACnet relay. Translating IoT data into virtual sensors on a bacnet network.
Running bacprop on a local network will allow IoT devices to send MQTT data representing sensor data to
bacprop where the sensor will be represented as a BACnet object on the same network.
The sensor must send a JSON MQTT message on the channel sensor/<sensorId>. The JSON object keys
will be translated to the properties of the BACnet Object, with the sensorId as the ID of the object.
A sensor message might look like:
{
"sensorId": 2,
"temp": 5.3,
"co2": 502
}bacprop will mark faultly any sensor object which it has no received data from
after 10 minutes, as specified in the bacprop/service.py definition.
bacprop is developed using pipenv
pipenv install --dev will install all requirements for development to take place.
bacprop is 100% unit tested, and all changes should continue this.
pipenv run python -m bacprop can be used to test changes
pipenv run test will run all tests
pipenv install will install all requirements for running
pipenv run python -m bacprop
Docker images have been provided for bacprop. Both an armv6 image and a x86 image exist.
MIT