steamcmd_commands.txt

ConVars:
@CSInterfaceProxyPassword = "" :
@CSInterfaceProxyUsername = "" :
@CustomBinaryRequestRetryTimes = "20" :
@DepotBuilderConfigRoot = "./depotscripts" :
@DepotBuilderContentRoot = "" :
@DepotBuilderDeltaMaxChunks = "20000" :
@DepotBuilderEnableVZd = "1" :
@DepotBuilderMaxParallelUploadChunks = "96" :
@DepotBuilderNoReslist = "0" :
@DepotBuilderNumHTTPSocketsToMDS = "48" :
@DepotBuilderOutputRoot = "" :
@DepotBuilderParallelUploadChunks = "6" :
@DepotBuilderProgressTimeout = "1000" :
@DepotBuilderVZdMinRatio = "0.4" :
@DepotBuilderXORMatchPercent = "95" :
@EnableUDPHistory = "0" :
@ForceContentServer = "" :
@ForceContentServerHTTPS = "0" :
@ForceContentServerType = "" :
@GCNameOverride = "" :
@LocalContentServer = "" :
@LogFileFolderName = "" : Use something other than 'logs' as the folder for log files
@MatchmakingCreatePingWaitTime = "0" :
@MatchmakingJoinPingWaitTime = "0" :
@MatchmakingSearchPingWaitTime = "0" :
@MatchmakingTotalPingWaitTime = "0" :
@MaxOutstandingSendThreadItem = "10000" :
@NetConnectionBufferMsgLimit = "1000" : Max # of message that will be buffered into a single zipped packet
@NetConnectionBufferThreaded = "1" :
@NoPromptForPassword = "0" :
@PeerContentClientMaxJobs = "1" : number of peer sources used at the same time
@PeerContentServerMaxClients = "8" : limit number of peers connected
@PeerContentServerPort = "27040" : If peer content server, will listen on this port for TCP connections from peers
@PeerContentServerRetryDelay = "60" : seconds before retrying peer content server
@ShutdownOnFailedCommand = "1" : Exit steamcmd immediately upon any failed console command
@StreamClientArgs = "" :
@WatchdogThreadPercentReport = "10" :
@bCSForceNoCache = "0" :
@bCallerDeadlineAbortJobDisableWhenHTTPReqStart = "1" :
@bClientDownloadUseHTTPS = "0" : Set this to use HTTPS on supported download servers
@bClientOpenCacheStickyRedirects = "1" :
@bClientTryRequestManifestWithoutCode = "0" : If set, client will try to get a manifest even without a manifest request code
@bCloudSyncFailDownloadIfGameOutOfDate = "0" :
@bContentManifestUseProtobufs = "1" :
@bDepotBuilderReadBufferSizeKB = "8192" :
@bDepotBuilderUnbufferedReads = "1" :
@bDisableDualStackDownloads = "0" :
@bDownloadThrottleDuringCloudSync = "0" :
@bEnableFrameFuncOverageWarnings = "0" : This turns on the spew in SPEW_MISC at level 4, still need to adjust spew levels to see it.
@bEnableHTTP2OnAllCHTTPClients = "0" : Enable HTTP/2 on all CHTTPClients automatically for SSL connections
@bEnableLogTearOff = "1" :
@bEnableNetworkJobsOwnStartList = "1" :
@bEnableOfflineLogonTicket = "1" : If true, an offline logon ticket will be requested during logon if none is cached
@bEnableSiteLicenseConnect = "1" :
@bEnableSiteLicenseConsoleLogging = "0" :
@bEnableSpewThrottle = "1" :
@bEnforceValidEmailDomains = "1" : Enable valid email domains in BIsValidEmailAddress
@bForceStreamUnsupportedApp = "0" :
@bHttpClientRecordHostnameDimension = "0" : Group HTTP metrics by hostname. Careful, the cardinality of your in-memory map might be large.
@bLANPeerConnectionTimeoutSec = "5" :
@bLogMessageToProtobufClass = "1" : We we first discover the protobuf class used for a particular EMsg, log it
@bMetricsEnabled = "1" : Enabling allows jobs to collect and report metrics through IMetricsReporters.
@bMsgErrorDump = "0" :
@bRefreshDownloadSourcesFrequently = "1" :
@bRequireOfflineLogonTicket = "1" : If true, a valid offline logon ticket is required when logging in in offline or no connection mode
@bScreenshotsLegacyCloudUpload = "0" : If set, use the legacy Steam Cloud upload path for screenshot uploads
@bShaderClientGetBucketManifestUseWebAPI = "1" :
@bSiteLicenseAllowCachedClientCredentials = "0" : Allow Steam clients that associate to this site to save username and auth credentials locally
@bSiteLicenseProxyCacheIsExternalProcess = "0" : If set, the caching content proxy will be handled by some process other than steamcmd. You probably also should set @sSiteLicenseProxyExplicitIP.
@bSiteLicenseProxyEnableIPv6 = "0" : If set, we will enable ipv6 communications to the Steam servers
@bSiteLicenseServer = "0" :
@bSiteLicenseServerGUI = "0" :
@cCSClientMaxNumSocketsPerHost = "8" :
@cCSClientMaxNumSocketsPerHostForCachingProxy = "32" :
@cDepotBuilderFileChunkingThreads = "4" :
@cMaxContentServersToRequest = "20" :
@cMaxInitialDownloadSources = "-1" :
@cMinimumJobTimeoutsToCheckPerFrame = "100" :
@cNetEncryptionHandshakeWorkMax_HighPri = "8000" :
@cNetEncryptionHandshakeWorkMax_LowPri = "2000" :
@cNetEncryptionHandshakeWorkMax_MedPri = "4000" :
@cSecUploadDownloadRates = "300" :
@cUDPSendRetries = "8" :
@cbPartnerUploadChunkSize = "1000000" : Chunk size to use for POSTing partner uploads
@cloud_testdynamicsyncapp = "0" :
@csecCSJobSuccessfulRequestTimeWindow = "60" :
@csecCSRequestProcessorTimeOut = "300" :
@csecDurationControlPeriod = "" : Override default duration-control / anti-indulgence time period. If nonzero, initial playtime threshold is this value in seconds
@csecDurationControlPeriodToday = "" : Override default duration-control / anti-indulgence time period. If nonzero, per-day playtime threshold is this value in seconds
@csecDurationControlSimulated = "" : Simulate having already played this many seconds of playtime.
@csecDurationControlSimulatedNonRecent = "" : Simulate having already played this many seconds of playtime today, but not recently.
@csecFavoriteGameAccountCacheTime = "86400" : Control how often we refresh the account IDs in the game server favorites list
@csecIncomingDataRatePeriod = "1" :
@csecSiteLicenseProxyStatsLog = "60" : Log proxy stats this often
@csecSiteLicenseProxyStatsUpdate = "1" : update proxy stats internally this often
@csecUpdateTargetNumConnectionsEpoch = "10" :
@durationControlNightCheck = "1" : Time of day check for duration-control feature. 1 = normal. 2 = force night-time. 0 = disable checks, only enabled for age verified accounts
@fDownloadRateImprovementToAddAnotherConnection = "1.2" :
@fMinDataRateToAttemptTwoConnectionsMbps = "1.5" :
@metricsDisabledCatalogs = "" : Comma separated list of metrics catalogs to disable. This is the last check.
@metricsDisabledOperations = "" : Comma separated list of metrics operations that are disabled. This setting has highest priority
@metricsEnabledOperations = "" : Comma separated list of metrics operations. Overrides disabled catalogs
@nBootReserveRetryPeriodSec = "30" : Number of seconds to wait before retrying after failing to create a boot reserve file. Should be a multiple of 10.
@nCSClientRateLimitKbps = "0" :
@nCSJob404ResponseLimit = "100" :
@nCSJob5xyResponseLimit = "10" :
@nCallerDeadlineHopLatencyMS = "10" : When we send a message expecting a reply from a job with a deadline, set the timeout on the message to [current time remaining in this job] - N ms. A negative value prevents propagating caller deadlines down the chain
@nClientCMDirectoryResultLoadPercentDither = "10" : Dither to apply to CM server loads received by CMDirectory query
@nClientCMUDPPingTimeGoodEnoughThresholdMS = "50" :
@nClientCMUDPPingTimeoutUseGoodEnoughMS = "250" :
@nClientCloudMaxMBParallelDownloads = "64" :
@nClientCloudMaxMBParallelUploads = "32" :
@nClientCloudMaxNumParallelDeletes = "10" :
@nClientCloudMaxNumParallelDownloads = "10" :
@nClientCloudMaxNumParallelUploads = "10" :
@nClientCloudMaxNumUploadsPerBatch = "100" :
@nClientDownloadEnableHTTP2PlatformLinux = "0" : Enable HTTP/2 connections on Linux clients
@nClientDownloadEnableHTTP2PlatformWindows = "1" : Enable HTTP/2 connections on Windows clients
@nClientDownloadEnableHTTP2RelBranch = "1" : Only enable HTTP/2 on enabled platforms on rel branch client if this is set
@nClientDownloadInitWindowSizeHTTP2Connection = "10000000" : Init per-connection window size for HTTP/2.
@nClientDownloadInitWindowSizeHTTP2Stream = "2000000" : Init per-stream window size for HTTP/2.
@nClientDownloadProbUseHTTP2IfAvailable = "90" : If http/2 is available for a given download source, use it w/ this probability [0,100]
@nClientEnableHTTP2PlatformLinux = "0" : Enable HTTP/2 connections on Linux clients
@nClientEnableHTTP2PlatformWindows = "0" : Enable HTTP/2 connections on Windows clients
@nClientEnableIPv6ForHTTPPlatformLinux = "0" : Enable IPv6 HTTP connections by default on Linux clients
@nClientEnableIPv6ForHTTPPlatformWindows = "0" : Enable IPv6 HTTP connections by default on Windows clients
@nClientQueryCMDirectoryBeforeConnect = "1" : Use CMDirectory webapi to get fresh CM list on connect - 0=disabled, 1=enabled, 2=main/dev/beta clients only
@nClientServiceMethodForDownloadListPercent = "100" :
@nContentDeltaChunkAppendChunksAfterProtobufSizeThresholdMB = "33" :
@nContentUpdateAutoVerifyCleanBytesThresholdMB = "2048" : How many clean MB must we verify before backing off on auto-verifies
@nContentUpdateAutoVerifyEnable = "1" : 0 = disabled; 1 = enabled all clients
@nContentUpdateAutoVerifyIntervalDays = "15" : Auto-verify game updates ever N days
@nDownloadLANChunkCacheSizeMB = "128" :
@nDownloadLANPeerGroup = "0" :
@nHTPPServerLogLevelAccessLine200 = "3" : Log level to use for one-line access-log-style for each http server request returning 200
@nHTPPServerLogLevelAccessLineNon200 = "2" : Log level to use for one-line access-log-style for each http server request that returns != 200
@nHTPPServerLogLevelDetails200 = "4" : Log level to use for full details of any http server request returning 200. This will probably fill up the log if you leave it on.
@nHTPPServerLogLevelDetailsNon200 = "4" : Log level to use for full details of any http server request returning != 200
@nHTTPServerMaxPipelinedReqsPerConnection = "8" : Max outstanding pipelined reqs per connection
@nHTTPServerYieldOn100ContinueSendSecs = "300" : Seconds to yield when sending a 100 continue for purposes of telling client to send body of request
@nIOCPThreadCount = "1" :
@nJobInteryieldMillisecondsAlertThreshold = "120" :
@nJobInteryieldMillisecondsLogThreshold = "80" :
@nJobInteryieldMillisecondsSpewThreshold = "500" :
@nJobNetSendsInsaneThreshold = "15000" :
@nLANPeerGroupRateLimitKbps = "0" :
@nLANPeerMaxConnections = "24" :
@nLANPeerRateLimitKbps = "0" :
@nLegalDictionaryUpdateRateInSeconds = "600" :
@nNetConnectionBufferZipLevel = "1" :
@nParentalSettingsLogLevel = "4" : Control the amount of spew written to the parental log file
@nProtobufArenaInitialBlockSize = "65536" : Default initial allocation size for PB arena
@nProtobufArenaMaxBlockSize = "524288" : Max block allocation size for PB arena
@nProtobufArenaNumberOfHeadersToShare = "128" : Number of Jobs to give a single protobuf Arena before we create a new one
@nProtobufArenaNumberOfJobsToShare = "128" : Number of Jobs to give a single protobuf Arena before we create a new one
@nRoamingConfigReconnectCloudSyncWindowSec = "7200" :
@nScreenshotSaveMaxWidth = "9999" :
@nServerRefreshRateLimitAdditional = "1" : Limits the burst number of calls per appid to refresh GMS game server lists
@nServerRefreshRateLimitBurst = "100" : Limits the burst number of calls per appid to refresh GMS game server lists
@nServerRefreshRateLimitInterval = "5" : Limits the burst number of calls per appid to refresh GMS game server lists
@nSiteLicenseProxyCacheMaxGB = "100" : If local content cache is enabled, use up to this much disk space
@nSiteLicenseProxyEnableP2P = "0" : If set, will have all connected clients join the same P2P download group
@nSiteLicenseProxyPort = "0" : Local content cache: set > 0 to enable, will listen on this port
@nSpewThrottleNagFrequencyMs = "5000" :
@nSpewThrottlePeriodMs = "1000" :
@nSpewThrottleResumeThreshold = "3" :
@nSpewThrottleTriggerThreshold = "10" :
@nSpewThrottleUnconditionalResumeMs = "5000" :
@nSpewThrottleUnconditionalTriggerCount = "50" :
@net_backlog_bytes_allowed = "18000000" :
@net_backlog_time_allowed_sec = "8" :
@net_loopback = "1" :
@sCSDSVirtualHostHeader = "" :
@sForceLocalContentCache = "" :
@sSiteLicenseProxyCacheDirectory = "appcache/slscache" : If local content cache is enabled, use this path for disk cache
@sSiteLicenseProxyExplicitIP = "" : Local content cache: if not blank, will instruct clients to go to this IP for the content cache.
@sStartupScript = "" : Exec contents of this convar as a script at startup
@sSteamCmdForcePlatformBitness = "" : Must be one of: [32 | 64]
@sSteamCmdForcePlatformType = "" : Must be one of: [windows | macos | linux | android]
@sTrustedLocalContentCacheName = "" : Set this to the machine name where a trusted local Steam download cache is hosted, and we'll use it if available.
@strCSNoCacheHeader = "no-cache" :
@test_bCloudForceSyncConflict = "0" : If @test_nCloudForceSyncFailureAppID is set, then set this so that the failure case is 'file conflict' instead of generic failure
@test_nCloudForceSyncFailureAppID = "0" : Set this to a non-zero App ID to test cloud sync failure. The next sync request will fail.
@uDownloadLANPeerPort = "27038" : If LAN p2p download enabled, will listen on this port for TCP connections from peers. Must be set consistently across all members of the group!
@uRemoteDiscoveryPortOverride = "0" : If non-zero, will listen on this port for broadcasts instead of k_nBroadcastPort
@uRemoteDiscoveryPortTransmit = "0" : If non-zero, will transmit outgoing broadcasts on this port instead of on the listen port
@voice_minabs = "0.15" :
@voice_minavg = "1.0" :
@voice_spew_activity_check = "0" :
AlwaysCustomizeOnBadExit = "0" :
AsyncFileIOAlternateReadWrite = "0" :
AsyncFileIODisableWrite = "0" :
AsyncFileIOExpectOutstandingIO = "6" :
AsyncFileIOForceGenericIO = "0" :
AsyncFileIOMaxPendingWin32 = "256" :
AsyncFileIOReadHandleCache = "64" :
AsyncFileIOWriteHandleCache = "64" :
ClientConnectTokenBucketEnable = "1" :
DepotDeltaPatches = "2" :
DepotDownloadProgressTimeout = "900" :
DepotMinWriteGapSizeMB = "64" :
DepotReconstructionBadChunk = "0" :
DepotReconstructionLowPrio = "1" :
DepotReconstructionNumIOThreads = "32" :
DepotUseAlternatingReadWrite = "1" :
DepotUseSparseFiles = "1" :
MergeCapReprocess_minutes = "480" :
UGCCDNReportPct = "0" :
app_force_preload = "0" : force this app into preload mode
app_info_http_min = "0" :
app_info_http_num_sockets = "8" :
appcloudsessions = "all" :
bBroadcastAlwaysUploadThumbnails = "1" :
bCheckUGCIntegrity = "1" :
bClientConvar601DEACE = "1" :
bClientPingCSesForCellID = "0" :
bCloudAcceptUnexpectedAutoCloudFileChanges = "0" :
bDelayGameUpdatesOnBeta = "0" : Should we do scheduling of updates on Steam Beta? If not, they'll all be ASAP
bDepotDeltaPatchUseAPI = "1" :
bDisableTenFootOverlay = "0" :
bEnableMHRCAsyncFileReadLog = "0" :
bEnableSubscribedFileListCache = "1" :
bFinishStagedDepotVersions = "1" :
bInstallscriptReports = "1" : send reports about broken install scripts
bPrefetchDownloadDetails = "1" : Prefetch download size before actual update happens
bShaderAllowReplay = "1" :
bShaderAllowReplayOnNVIDIA = "1" :
bShaderAlwaysProcessWhenRunningGame = "0" :
bShaderCacheDownloads = "1" : Allow to download shader cache depots
bShaderDepotNative = "1" :
bShaderEnableCacheManagement = "1" :
bShaderEnableFossilizeLayer = "1" :
bShaderEnableUpload = "1" :
bShaderFossilizeFastMerge = "1" :
bShaderPrecompiledCache = "1" :
bShaderVerboseLogs = "0" :
bSingleFileUpdateMode = "1" :
bSteam3LimitedUserEnable = "1" :
bSteamLoaderEnable = "1" :
bSubscribedFilesDecompressOnClient = "1" :
bSubscribedFilesPollForUpdates = "0" :
bSubscribedFilesUseRangeRequests = "0" :
bVerifyAllDownloads = "0" : Verify all files after downloading an update
batterycharging = "0" :
batterypercent = "-1" :
batterytime = "-1" :
broadcast_upload_drop_sec = "6" :
broadcast_upload_update_sec = "3" :
cAppUpdateWorkingSetMB = "256" :
cChunkValidationMaxLog = "100" :
cFileValidationMaxLog = "100" :
cMaxDecryptThreadsOverride = "0" :
cPreallocateMinimumSizeKB = "256" :
controller_base_rotation_angle = "0" :
controller_edge_cutoff = "0" :
controller_gyro_x_scale = "16000" :
controller_idle_poll_interval = "50000" : SteamInput Idle Polling interval in microseconds. Default 50,000us = 20hz
controller_min_activation_time = "0.0333" :
controller_momentum_min_vel = "0" :
controller_momentum_num_excluded_samples = "1" :
controller_momentum_num_included_samples = "5" :
controller_momentum_smooth = "0" :
controller_poll_state = "-1" :
controller_rate = "2000" : SteamInput Active Polling interval in microseconds. Default 2000us = 500hz
controller_spew_level = "3" :
countrycode = "" :
csecManifestDownloadTimeout = "120" :
deck_mouse_haptic_tick_dist = "9000" :
deck_mouse_leftside_filter = "30500" :
developer = "0" :
g_RumbleRepeatAfterDelaySeconds = "0.050" :
g_RumbleSustainTimeSeconds = "10" :
gyro_auto_detect_polling_rate = "0" : 0: Legacy Mode. Known to be buggy with Blitz 2 and 1000hz controllers. 1: If SDL sensor delta time is zero, or unexpected sensor timings are detected, fall back on packet-rate based estimation of polling rate (if outside a margin of error: gyro_sensor_margin_of_error_pct). 2: Exclusively use packet-rate based estimation of polling rate.
gyro_calibration_duration_automatic = "5.0" : Duration in seconds required to calibrate gyro drift outside of manual calibration. Warning: Short calibration times are more likely to result in false positive anti-drift solutions.
gyro_calibration_duration_manual = "5.0" : Duration in second of manual gyro drift calibration. Longer durations make for more accurate drift corrections.
gyro_calibration_duration_manual_timeout = "30.0" : Duration before manual gyro drift calibration times out, and returns to calibrating the noise tolerance.
gyro_calibration_duration_stationary = "5.0" : Duration in second of gyro noise tolerance calibration.
gyro_debug_sensor_timings = "0" :
gyro_drift_calibration_debug = "0" : Display which sensor readings (accelerometer or gyroscope) are restarting the drift calibration due to their noise being bigger than noise tolerance.
gyro_drift_correction_enabled = "1" : Turn on/off software gyro anti-drift correction.
gyro_filter_enabled = "1" : Enable (Pseudo) One Euro Filter to internal gyro quaternion. This reduces low level sensor noise and hand shake.
gyro_filter_max_speed = "16.0" : Above this gyro rotation speed (degrees/second) we apply min (zero) smoothing.
gyro_filter_min_speed = "2" : Below this gyro rotation speed (degrees/second) we apply max smoothing (low pass filter).
gyro_filter_smoothness = "75" : Smoothing amount for low pass filter. 1 is TOO smoothed (barely responding). 100 is barely smoothed.
gyro_force_sensor_rate = "0" : If zero, cull suspected bad sensor data (can result in a loss of natural sensitivity). If not zero, ignore IMU sensor timing and use fixed rate instead. Measured in HZ. Common values: 250hz (PS5), 250hz (PS4), 200hz (Nintendo Switch)
gyro_precision_speed = "0.75" :
gyro_precision_speed_enabled = "1" : Enable linear response multiplier to speeds below the value set in the "Gyro To..." modes. This applies itself to the remaining speed after the gyro speed deadzone has been applied.
gyro_prediction_correction_speed_max = "180.0" : Above this speed (degrees per second) there is full correction of the predicted quaternion toward the "ground truth" quaternion. Note this will still be gradual correction, and only in the shared direction of user rotation and the correction required.
gyro_prediction_correction_speed_min = "30.0" : Below this speed (degrees per second) there is no correction of the predicted quaternion toward the "ground truth" quaternion.
gyro_prediction_enabled = "1" : Enable extrapolation of rotation using the last known gyro speed. This is important to avoid staggered signals over blue tooth, but generally upgrades gyros that run lower than 500hz. The extrapolated quaternion will correct back toward the "ground truth" quaternion when the speed exceeds.
gyro_raw_deadzone = "6.0" : Legacy deadzoning for gyro signal. Only affects "As Mouse" and its derivative modes.
gyro_sensor_margin_of_error_pct = "25" : If gyro_auto_detect_polling_rate is set to mode 2, use this +/- X% value as the acceptable margin of error before falling back on packet-rate based estimation of polling rate.
gyro_speed_deadzone = "0.5" :
gyro_speed_deadzone_enabled = "1" : Enable the minimum speed required to update the gyroscope response.
gyro_stationary_calibration_debug = "0" : Display which sensor readings (accelerometer or gyroscope) are restarting the tolerance calibration due to their noise being too large.
haptic_click_gain_modifier = "0" :
haptic_intensity = "8000" :
haptic_intensity_old = "2500" :
haptic_new = "0" :
haptic_off_divisor = "5.0f" :
haptic_tick_gain_modifier = "0" :
log_files_always_flush = "0" :
log_matchmaking_callbacks = "0" :
mic_autogain = "16000" : automatic gain control level for microphone input
mic_inputfile = "" : causes voice data to be read from the specified file instead of from the microphone
mic_outputfile = "" : causes microphone data to be written out to the specified file
musiclogging = "0" :
nBroadcastSessionMaxDropFrames = "100" :
nClientBackgroundAutoUpdateLessRecentlyPlayedThresholdHours = "192" : If you've played the game more recently than this, we'll schedule the background update sooner.
nClientBackgroundAutoUpdateNotPlayedTimeSpreadDays = "14" : If the user hasn't played this game in a while, pick a morning up to this many days out to update.
nClientBackgroundAutoUpdateRecentlyPlayedThresholdHours = "72" : If you've played the game more recently than this, we'll schedule the background update sooner.
nClientBackgroundAutoUpdateTargetHour = "4" : Target hour, in local time, for auto-scheduled app updates. Will be spread around this point via the convar below.
nClientBackgroundAutoUpdateTimeSpreadMinutes = "360" : Spread of time around the above target hour - this is the +/- 2-sigma window, so half this on either side.
nCloudFileCompressionMinFileSizeKB = "16" :
nCloudFileCompressionMinFileSizeKBSharedFile = "128" :
nCloudFileCompressionPercentageMin = "10" :
nCloudFileCompressionPercentageMinSharedFile = "50" :
nCloudUploadMinIntervalSec = "1800" :
nCloudUploadNetworkTimeoutSeconds = "400" :
nContentDownloadsToOtherDrive = "1" : Allow to download updates to other drives then install folder is on
nContentStatsReportInterval = "72" : In Hours
nDepotSaveCorruptChunks = "0" :
nPeerContentDefaultMode = "1" : 0 = off, 1 = only me, 2 = only friends, 3 = anyone
nPrivateBetaBranches = "1" :
nProductInfoUpdateInterval = "900" :
nRichPresenceUploadThrottleSecs = "5" :
nSubscribedAutoDownloadMaxSimultaneous = "8" :
net_incomingcheck = "1" :
net_maxresendsperframe = "32" :
p2p_connecttimeout = "15" :
p2p_unusedtimeout = "120" :
rtime32EarliestSubscribedFileToDownload = "1354389910" :
spew_controller_loss = "0" :
testappcloudpaths = "0" :
ugc_query_default_cache_time = "600" :
ugc_query_max_get_details = "1000" :
unShaderBackgroundProcessingThreads = "0" :
unShaderHighPriorityProcessingThreads = "0" :
unShaderHitCacheGeneration = "4" :
unShaderMaxHeadersPerMessage = "1024" :
unShaderMaxUploadMessageSizeKb = "256" :
voice_api_optimalrate = "24000" :
voice_autogain = "0" :
voice_fakeloss = "0" :
voice_outputdevice = "0" : 0=>Miles 1=>XAudio2
voice_outputfile = "" : causes output from voice system to be written out to the specified file
voice_preprocess = "0" : enables voice cleanup on incoming microphone data
voice_quality = "6" :
voice_resample_quality = "1" :
voice_silk_bitrate = "30000" :
workshop_items_cache_days = "14" :
workshop_items_update_interval = "2700" :

Commands:
api_logging : api_logging <enabled> <verbose> : enable/disable verbose API logging in steamcmd
app_backup : <appid> <target folder> [max folder size MB]
app_build_all_depots : app_build_all_depots [-desc <text>] -depotconfigpath <folder> -contentroot <folder> -buildoutput <folder> <appid> : Build all depots for one app
app_delay_update : <appid> <seconds> force delay update
app_dlc_status : app_status <appId> <dlcId>
app_info_find : Find apps with a certain appinfo value set, eg 'common/type media'. * is any.
app_info_print : app_info_print <appid> [section] : print app info for appID
app_info_request : <AppID> - Issue an appinfo request for the given appid. Does not wait for results from the server.
app_info_update : [0|1] : trigger app info update, optionally for update all
app_install_script : <AppID> [uninstall:0|1]- Runs app install script.
app_launch : <appId> [LaunchOptionIndex] [Arguments]
app_license_request : <AppID> - Requests a free licenses for this app if not already owned.
app_run : <appId> [LaunchOptionIndex] [Arguments]
app_set_config : <AppID> <key> <value> - sets a config value for given app.
app_status : app_status <appId>
app_stop : <appid> [force:0|1] stop this running app
app_uninstall : <appId>
app_update : app_update <appid> [-validate] [-language <lang>] [-beta <betaname>] [-betapassword <pwd>] make sure a Steam application is up-to-date
app_update_cancel : <EAppUpdateError>
apps_installed :
apps_running : displays information about running games tracked by Steam
async_disconnect : async disconnect
build_installer : <project file> <target folder> [beta key] [beta pwd]
ceg_wrap : ceg_wrap <appid> <orig filename> <stripped filename> <strips filename> : upload executable to back end for CEG wrapping
cm_force_change : Change CM List
device_authorize_status : prints device authorization status
download_chunk : download_chunk <appid> <depotid> <sha>: download a single chunk from a depot
download_depot : download_depot <appid> <depotid> [<target manifestid>] [<delta manifestid>] [<depot flags filter>] [<destination folder>]: download a single depot
download_item : download_item <appid> <PublishedFileId> : download a workshop item directly
download_sources : Dumps list of download sources
drm_wrap : drm_wrap <appid> <input filename> <output filename> <toolname> <flags> [<destination>]: upload executable to back end for DRM wrapping
dump_box_ips : dump the list of detected local box IP addresses
dump_offline_playtime : Dumps recorded playtime sessions
dump_scheduled_functions : usage: "dump_scheduled_functions" Displays internal Steam function callback timers
exit : Stops Steam client console
find : find substrings in console commands
force_install_dir : force_install_dir <directory>
get_download_throttle :
help : Show help information
http_cache_clearall : Delete all data from internal HTTP client and CEF browser
http_test : <optional_url> test HTTP connectivity via specified URL
info : Dump various Steam info
library_folder_list : list all mounted Steam volumes
licenses_for_app : <appid> : shows active licenses for appid
licenses_print : display users's Steam3 licenses
log_callbacks : usage: "log_callbacks <first callbackID> [last callbackID]
log_ipc : usage: "log_ipc [counts|verbose|#maxcount] <filter>" Enables IPC logging. Specifying "counts" or "verbose" is optional, defaulting to counts.
login : <username> [<password>] [<Steam guard code>] - login to Steam
logoff : Disconnect from Steam
logon : see 'login'
logout : Disconnect from Steam
manifest_dump : <filename> [0|1: include chunks]
mem_stats : Dump memory stats
net_fake_state : {normal|NoLAN|CaptivePortal_Redirected|CaptivePortal_InPlace|NoInternet|NoSteam} Simulate network conditions
net_msgdump : Dumps list of sent net messages
net_msgspew : Spews sent and recv net messages
p2p_info : usage: "p2p_info" Displays the current state of the P2P networking subsystem.
package_info_print : Dumps package info for packageID
patch_dump : <filename> <depotid>
peer_content_server_status : Dumps status of peer content server
print_sdr_ping : print current sdr ping location string
profile : <seconds> profile for N seconds
quit : Stops Steam client console
remote_clients : dump remote client info
render_ipc_connections : usage: "render_ipc_connections
run_app_build : run_app_build [-preview] [-desc <text>] <appbuildfile> : run app depot build as specified in appbuildfile
run_app_build_http : run_app_build_http : alias for run_app_build
runscript : <scriptfile> - runs a console command script
set_app_beta_password : set_app_beta_password <appid> -betapassword <pwd> -- opt-in to the app beta with the given password
set_download_throttle : set_download_throttle <kbps> <bPersistent = false>
set_spew : <group> <level> <loglevel> set spew levels for the given group
set_spew_level : <SpewLevel LogLevel> Sets spew and log level for all groups
set_steam_guard_code : <code> - authorize this computer by adding the Steam Guard email code
set_var : <name> <value>- Set the value of a Cvar
shader_process : shader_process <appId> <bucketID> <optionalOverrideBasePath>
sign_install_script : sign_install_script <appid> <input filename> <output filename> : upload install script to back end for signing
swarm_get_bucket_manifest : <appid> <bucket_hw_id> <bucket_sw_id> - query Swarm bucket depot manifest, if depot built
swarm_shader_compile : <work_dir> <threadCount>
swarm_shader_download : <work_dir>
swarm_shader_prepopulate : <work_dir>
swarm_shader_upload : <work_dir>
swarm_tc_download : swarm_tc_download <src_bucket_hw_id> <src_bucketsw_id> <work_dir>
swarm_tc_upload : <src_bucket_hw_id> <src_bucketsw_id> <dst_bucket_hw_id> <dst_bucket_sw_id> <work_dir> <appid> <bucketid>
test_dropcon : Tests dropping a connection
test_failnextconnect : Tests failing the next connection
test_opus_voice_encode : test an opus voice encode
test_reconnect : Reconnect after using test_failnextconnect&test_dropcon
test_voice_encode : test a voice encode
timed_trial_add_playtime : timed_trial_add_playtime <appId> <seconds>: add trial app playtime (developer only)
timed_trial_reset_playtime : timed_trial_reset_playtime <appId> : reset trial app playtime (developer only)
timed_trial_status : timed_trial_status <appId> : show time trial app status
user_friends : Dumps list of friends
verify_chunk_store : verify_chunk_store <appid> <depotid> <datafile> : run app depot build as specified in appbuildfile
verify_vpk : verify_vpk <datafile> : verifies content of given VPK
voice_game_usage : displays information about the game's use of Steam voice
workshop_build_item : workshop_build_item <build config filename> : build a workshop item
workshop_create_legacy_item : workshop_create_legacy_item <appid> <workshop file> : build a legacy workshop item
workshop_download_item : workshop_download_item <appid> <PublishedFileId> : download an item using the workshop system
workshop_status : workshop_status <appId>