sdkconfig.defaults

CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
CONFIG_ESPTOOLPY_FLASHFREQ="80m"
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
CONFIG_ESPTOOLPY_FLASHSIZE="16MB"

CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=240

CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_OFFSET=0xC000
CONFIG_PARTITION_TABLE_MD5=y

CONFIG_SPIRAM=y
CONFIG_SPIRAM_MODE_QUAD=n
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_SPIRAM_SPEED=80

# TinyUSB needs to be initialized and run from one core
# that's why we pin the task to CPU0 and init tusb in the task
# on dual core devices (ESP32S3)
CONFIG_TINYUSB_TASK_AFFINITY_CPU0=y
CONFIG_TINYUSB_INIT_IN_DEFAULT_TASK=y

CONFIG_TINYUSB_NET_MODE_NONE=n
CONFIG_TINYUSB_NET_MODE_NCM=y
CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="BoundBox"
CONFIG_TINYUSB_DESC_PRODUCT_STRING="Ethernet"
CONFIG_TINYUSB_DESC_SERIAL_STRING="31337"

CONFIG_LWIP_LOCAL_HOSTNAME="BoundBox"
CONFIG_ETH_SPI_ETHERNET_W5500=y

CONFIG_ESP_MAIN_TASK_STACK_SIZE=7168

CONFIG_LV_CONF_SKIP=n
CONFIG_LV_SPRINTF_USE_FLOAT=y

CONFIG_ESP_CONSOLE_UART_DEFAULT=n
CONFIG_ESP_CONSOLE_UART_CUSTOM=y
CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_0=n
CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_1=y
CONFIG_ESP_CONSOLE_UART_NUM=1
CONFIG_ESP_CONSOLE_UART_TX_GPIO=43
CONFIG_ESP_CONSOLE_UART_RX_GPIO=44
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200