AWS-LC is a fork of BoringSSL, which is a derivative of OpenSSL. AWS-LC aims to be API compatible with the OPENSSL_VERSION_NUMBER defined in openssl/base.h (currently OpenSSL 1.1.1). Version checks against the macro should ideally work as-is with AWS-LC. AWS-LC defines the corresponding OPENSSL_NO_* feature macros corresponding to removed features.
There may be missing APIs or macros and subtle behavioral differences when migrating to AWS-LC from OpenSSL. OpenSSL may have underlying behavioral conventions that aren't standardized and there's no guarantee that these will be consistent within AWS-LC. In general, see if the AWS-LC compiles and runs against the tests with your application, consult the documentation available in the header files, and check if problematic features can be removed if possible. If not, feel free to contact us about adding new features or missing symbols, we will typically add compatibility for convenience.
In rarer instances, AWS-LC-specific code may be necessary. The OPENSSL_IS_AWSLC preprocessor macro can be used in #ifdefs and configure scripts to distinguish OpenSSL from AWS-LC. Please do not use the presence or absence of particular symbols to detect AWS-LC. AWS-LC is commited to having a stable API, but is not ABI stable. Systems cannot directly swap out OpenSSL with AWS-LC without recompiling. This makes it not suitable as a system library in a traditional Linux distribution.
Despite supporting certain OpenSSL APIs, AWS-LC will not behave exactly the same in regards to non-standardized lower level details. Function signatures and parameters generally remain the same across both libraries. AWS-LC attempts to make cryptography and ssl less configurable and hard to misuse. AWS-LC has diverged since the initial fork off of OpenSSL 1.0.2 and does not implement every feature OpenSSL has today. This porting guide compiles a list of known differences and fall into 4 main categories. More details on each difference and the justifications will be outlined in each section.
- Preexisting BoringSSL Changes
- No-op Symbols and Configurations
- Differences in Configuration Defaults
- Functional Differences (WIP)
The following callouts are remnants of BoringSSL's original porting guide.
Some APIs have been converted to use size_t for consistency and to avoid
integer overflows at the API boundary. (Existing logic uses a mismash of int,
long, and unsigned.) For the most part, implicit casts mean that existing
code continues to compile. In some cases, this may require BoringSSL-specific
code, particularly to avoid compiler warnings.
Most notably, the STACK_OF(T) types have all been converted to use size_t
instead of int for indices and lengths.
Some external consumers increment reference counts directly by calling
CRYPTO_add with the corresponding CRYPTO_LOCK_* value. These APIs no longer
exist in BoringSSL. Instead, code which increments reference counts should call
the corresponding FOO_up_ref function, such as EVP_PKEY_up_ref.
BoringSSL also hides some structs which were previously exposed in OpenSSL 1.0.2, particularly in libssl. Use the relevant accessors instead.
Note that some of these APIs were added in OpenSSL 1.1.0, so projects which do
not yet support 1.1.0 may need additional #ifdefs. Projects supporting OpenSSL
1.1.0 should not require modification.
OpenSSL's errors are extremely specific, leaking internals of the library,
including even a function code for the function which emitted the error! As some
logic in BoringSSL has been rewritten, code which conditions on the error may
break (grep for ERR_GET_REASON and ERR_GET_FUNC). This danger also exists
when upgrading OpenSSL versions.
Where possible, avoid conditioning on the exact error reason. Otherwise, a
BoringSSL #ifdef may be necessary. Exactly how best to resolve this issue is
still being determined. It's possible some new APIs will be added in the future.
Function codes have been completely removed. Remove code which conditions on these as it will break with the slightest change in the library, OpenSSL or BoringSSL.
Some OpenSSL APIs are implemented with ioctl-style functions such as
SSL_ctrl and EVP_PKEY_CTX_ctrl, combined with convenience macros, such as
# define SSL_CTX_set_mode(ctx,op) \
SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL)
In BoringSSL, these macros have been replaced with proper functions. The
underlying _ctrl functions have been removed.
For convenience, SSL_CTRL_* values are retained as macros to doesnt_exist so
existing code which uses them (or the wrapper macros) in #ifdef expressions
will continue to function. However, the macros themselves will not work.
Switch any *_ctrl callers to the macro/function versions. This works in both
OpenSSL and BoringSSL. Note that BoringSSL's function versions will be
type-checked and may require more care with types. See the end of this
document for a table of functions to use.
EVP_PKEY_HMAC is deprecated and preserved with minimal functionality. Use the
HMAC_* functions in hmac.h instead.
EVP_PKEY_DSA is deprecated. It is currently still possible to parse DER into a
DSA EVP_PKEY, but signing or verifying with those objects will not work.
The DES_cblock type has been switched from an array to a struct to avoid the
pitfalls around array types in C. Where features which require DES cannot be
disabled, BoringSSL-specific codepaths may be necessary.
OpenSSL enables TLS renegotiation by default and accepts renegotiation requests from the peer transparently. Renegotiation is an extremely problematic protocol feature, so BoringSSL rejects peer renegotiations by default.
To enable renegotiation, call SSL_set_renegotiate_mode and set it to
ssl_renegotiate_once or ssl_renegotiate_freely. Renegotiation is only
supported as a client in TLS and the HelloRequest must be received at a
quiet point in the application protocol. This is sufficient to support the
common use of requesting a new client certificate between an HTTP request and
response in (unpipelined) HTTP/1.1.
Things which do not work:
-
There is no support for renegotiation as a server. (Attempts by clients will result in a fatal alert so that ClientHello messages cannot be used to flood a server and escape higher-level limits.)
-
There is no support for renegotiation in DTLS.
-
There is no support for initiating renegotiation;
SSL_renegotiatealways fails andSSL_set_statedoes nothing. -
Interleaving application data with the new handshake is forbidden.
-
If a HelloRequest is received while
SSL_writehas unsent application data, the renegotiation is rejected. -
Renegotiation does not participate in session resumption. The client will not offer a session on renegotiation or resume any session established by a renegotiation handshake.
-
The server may not change its certificate in the renegotiation. This mitigates the triple handshake attack. Any new stapled OCSP response and SCT list will be ignored. As no authentication state may change, BoringSSL will not re-verify the certificate on a renegotiation. Callbacks such as
SSL_CTX_set_custom_verifywill only run on the initial handshake.
BoringSSL's BN_bn2hex function uses lowercase hexadecimal digits instead of
uppercase. Some code may require changes to avoid being sensitive to this
difference.
OpenSSL's ASN.1 stack uses d2i functions for parsing. They have the form:
RSA *d2i_RSAPrivateKey(RSA **out, const uint8_t **inp, long len);
In addition to returning the result, OpenSSL places it in *out if out is
not NULL. On input, if *out is not NULL, OpenSSL will usually (but not
always) reuse that object rather than allocating a new one. In BoringSSL, these
functions are compatibility wrappers over a newer ASN.1 stack. Even if *out
is not NULL, these wrappers will always allocate a new object and free the
previous one.
Ensure that callers do not rely on this object reuse behavior. It is
recommended to avoid the out parameter completely and always pass in NULL.
Note that less error-prone APIs are available for BoringSSL-specific code (see
below).
OpenSSL provides wrappers OPENSSL_malloc and OPENSSL_free over the standard
malloc and free. Memory allocated by OpenSSL should be released with
OPENSSL_free, not the standard free. However, by default, they are
implemented directly using malloc and free, so code which mixes them up
usually works.
In BoringSSL, OPENSSL_malloc and OPENSSL_free maintain additional book-keeping to zero memory
on OPENSSL_free. Allocated memory returned by this library must be freed using OPENSSL_free.
BoringSSL makes some changes to OpenSSL which simplify the API but remain compatible with OpenSSL consumers. In general, consult the BoringSSL documentation for any functions in new BoringSSL-only code.
Most OpenSSL APIs return 1 on success and either 0 or -1 on failure. BoringSSL
has narrowed most of these to 1 on success and 0 on failure. BoringSSL-specific
code may take advantage of the less error-prone APIs and use ! to check for
errors.
OpenSSL has a number of different initialization functions for setting up error strings and loading algorithms, etc. All of these functions still exist in BoringSSL for convenience, but they do nothing and are not necessary.
The one exception is CRYPTO_library_init. In BORINGSSL_NO_STATIC_INITIALIZER
builds, it must be called to query CPU capabilities before the rest of the
library. In the default configuration, this is done with a static initializer
and is also unnecessary.
OpenSSL provides a number of APIs to configure threading callbacks and set up locks. Without initializing these, the library is not thread-safe. Configuring these does nothing in BoringSSL. Instead, BoringSSL calls pthreads and the corresponding Windows APIs internally and is always thread-safe where the API guarantees it.
BoringSSL is in the process of deprecating OpenSSL's d2i and i2d in favor of
new functions using the much less error-prone CBS and CBB types.
BoringSSL-only code should use those functions where available.
When porting code which uses SSL_CTX_ctrl or SSL_ctrl, use the replacement
functions below. If a function has both SSL_CTX and SSL variants, only the
SSL_CTX version is listed.
Note some values correspond to multiple functions depending on the larg
parameter.
CTRL value |
Replacement function(s) |
|---|---|
DTLS_CTRL_GET_TIMEOUT |
DTLSv1_get_timeout |
DTLS_CTRL_HANDLE_TIMEOUT |
DTLSv1_handle_timeout |
SSL_CTRL_CHAIN |
SSL_CTX_set0_chain or SSL_CTX_set1_chain |
SSL_CTRL_CHAIN_CERT |
SSL_add0_chain_cert or SSL_add1_chain_cert |
SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS |
SSL_CTX_clear_extra_chain_certs |
SSL_CTRL_CLEAR_MODE |
SSL_CTX_clear_mode |
SSL_CTRL_CLEAR_OPTIONS |
SSL_CTX_clear_options |
SSL_CTRL_EXTRA_CHAIN_CERT |
SSL_CTX_add_extra_chain_cert |
SSL_CTRL_GET_CHAIN_CERTS |
SSL_CTX_get0_chain_certs |
SSL_CTRL_GET_CLIENT_CERT_TYPES |
SSL_get0_certificate_types |
SSL_CTRL_GET_EXTRA_CHAIN_CERTS |
SSL_CTX_get_extra_chain_certs or SSL_CTX_get_extra_chain_certs_only |
SSL_CTRL_GET_MAX_CERT_LIST |
SSL_CTX_get_max_cert_list |
SSL_CTRL_GET_NUM_RENEGOTIATIONS |
SSL_num_renegotiations |
SSL_CTRL_GET_READ_AHEAD |
SSL_CTX_get_read_ahead |
SSL_CTRL_GET_RI_SUPPORT |
SSL_get_secure_renegotiation_support |
SSL_CTRL_GET_SESSION_REUSED |
SSL_session_reused |
SSL_CTRL_GET_SESS_CACHE_MODE |
SSL_CTX_get_session_cache_mode |
SSL_CTRL_GET_SESS_CACHE_SIZE |
SSL_CTX_sess_get_cache_size |
SSL_CTRL_GET_TLSEXT_TICKET_KEYS |
SSL_CTX_get_tlsext_ticket_keys |
SSL_CTRL_GET_TOTAL_RENEGOTIATIONS |
SSL_total_renegotiations |
SSL_CTRL_MODE |
SSL_CTX_get_mode or SSL_CTX_set_mode |
SSL_CTRL_NEED_TMP_RSA |
SSL_CTX_need_tmp_RSA is equivalent, but do not use this function. (It is a no-op in BoringSSL.) |
SSL_CTRL_OPTIONS |
SSL_CTX_get_options or SSL_CTX_set_options |
SSL_CTRL_SESS_NUMBER |
SSL_CTX_sess_number |
SSL_CTRL_SET_CURVES |
SSL_CTX_set1_curves |
SSL_CTRL_SET_ECDH_AUTO |
SSL_CTX_set_ecdh_auto |
SSL_CTRL_SET_MAX_CERT_LIST |
SSL_CTX_set_max_cert_list |
SSL_CTRL_SET_MAX_SEND_FRAGMENT |
SSL_CTX_set_max_send_fragment |
SSL_CTRL_SET_MSG_CALLBACK |
SSL_set_msg_callback |
SSL_CTRL_SET_MSG_CALLBACK_ARG |
SSL_set_msg_callback_arg |
SSL_CTRL_SET_MTU |
SSL_set_mtu |
SSL_CTRL_SET_READ_AHEAD |
SSL_CTX_set_read_ahead |
SSL_CTRL_SET_SESS_CACHE_MODE |
SSL_CTX_set_session_cache_mode |
SSL_CTRL_SET_SESS_CACHE_SIZE |
SSL_CTX_sess_set_cache_size |
SSL_CTRL_SET_TLSEXT_HOSTNAME |
SSL_set_tlsext_host_name |
SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG |
SSL_CTX_set_tlsext_servername_arg |
SSL_CTRL_SET_TLSEXT_SERVERNAME_CB |
SSL_CTX_set_tlsext_servername_callback |
SSL_CTRL_SET_TLSEXT_TICKET_KEYS |
SSL_CTX_set_tlsext_ticket_keys |
SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB |
SSL_CTX_set_tlsext_ticket_key_cb |
SSL_CTRL_SET_TMP_DH |
SSL_CTX_set_tmp_dh |
SSL_CTRL_SET_TMP_DH_CB |
SSL_CTX_set_tmp_dh_callback |
SSL_CTRL_SET_TMP_ECDH |
SSL_CTX_set_tmp_ecdh |
SSL_CTRL_SET_TMP_ECDH_CB |
SSL_CTX_set_tmp_ecdh_callback |
SSL_CTRL_SET_TMP_RSA |
SSL_CTX_set_tmp_rsa is equivalent, but do not use this function. (It is a no-op in BoringSSL.) |
SSL_CTRL_SET_TMP_RSA_CB |
SSL_CTX_set_tmp_rsa_callback is equivalent, but do not use this function. (It is a no-op in BoringSSL.) |
In some places, BoringSSL has added significant APIs. Use of these APIs goes beyound “porting” and means giving up on OpenSSL compatibility.
One example of this has already been mentioned: the CBS and CBB functions should be used whenever parsing or serialising data.
With the standard OpenSSL APIs, when making many TLS connections, the certificate data for each connection is retained in memory in an expensive X509 structure. Additionally, common certificates often appear in the chains for multiple connections and are needlessly duplicated in memory.
A CRYPTO_BUFFER is just an opaque byte string. A CRYPTO_BUFFER_POOL is an intern table for these buffers, i.e. it ensures that only a single copy of any given byte string is kept for each pool.
The function TLS_with_buffers_method returns an SSL_METHOD that avoids creating X509 objects for certificates. Additionally, SSL_CTX_set0_buffer_pool can be used to install a pool on an SSL_CTX so that certificates can be deduplicated across connections and across SSL_CTXs.
When using these functions, the application also needs to ensure that it doesn't call other functions that deal with X509 or X509_NAME objects. For example, SSL_get_peer_certificate or SSL_get_peer_cert_chain. Doing so will trigger an assert in debug mode and will result in NULLs in release mode. Instead, call the buffer-based alternatives such as SSL_get0_peer_certificates. (See ssl.h for functions taking or returning CRYPTO_BUFFER.) The buffer-based alternative functions will work even when not using TLS_with_buffers_method, thus application code can transition gradually.
In order to use buffers, the application code also needs to implement its own certificate verification using SSL_[CTX_]set_custom_verify. Otherwise all connections will fail with a verification error. Auto-chaining is also disabled when using buffers, whereas Auto-chaining behavior had been enabled as default in OpenSSL. Services should restructure their certificate chains to not use the default auto-chaining behavior from OpenSSL.
Once those changes have been completed, the whole of the OpenSSL X.509 and ASN.1 code should be eliminated by the linker if BoringSSL is linked statically.
Using CRYPTO_BUFFER instead of X509 or X509_NAME can also have some side effects, leading to a difference in behavior from OpenSSL. For example, when calling SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list), OpenSSL stores a reference to |name_list|, transferring ownership while leaving the passed-in parameter untouched. In contrast, AWS-LC stores |name_list| as a stack of type CRYPTO_BUFFER, which results in creating a copy and freeing the passed-in list. This can lead to errors in applications that expect access to the passed-in list after calling such functions.
OpenSSL offers the ENGINE API for implementing opaque private keys (i.e. private keys where software only has oracle access because the secrets are held in special hardware or on another machine). While the ENGINE API has been mostly removed from BoringSSL, it is still possible to support opaque keys in this way. However, when using such keys with TLS and BoringSSL, you should strongly prefer using SSL_PRIVATE_KEY_METHOD via SSL[_CTX]_set_private_key_method. This allows a handshake to be suspended while the private operation is in progress. It also supports more forms of opaque key as it exposes higher-level information about the operation to be performed.