PineNote not booting after following flashing guide with rkdeveloptool on nixos

[Helmut-Becker]

Hello friends,

after flashing this firmware my PineNote not not booting (at least nothing is showing one the screen). Can anybody help with this?

Observed behaviour:

1. booting into rockusb mode with magnet and usb cable inserted
2. following flashing instructions
3. reboot the device manually (i.e. holding the power button ~20s) & removing the magnet & usb cable
4. boot the device by holding power button for ~4s
5. screen flashes indicating boot
6. screen flashes after ~1min (indicating reboot I guess)
7. screen stays white forever

Expected behaviour:

• boots into linux after flashing and rebooting

Thanks :)

[Helmut-Becker]

Well. Found the solution :) Needed to also flash the waveform partition. Shall I include this into the flashing instructions?
greetings

[Helmut-Becker]

Never mind... The issue reoccurs after reboot.