Skip to content

Latest commit

 

History

History
166 lines (124 loc) · 5.48 KB

README.rst

File metadata and controls

166 lines (124 loc) · 5.48 KB
https://img.shields.io/pypi/v/xopen.svg?branch=master

xopen

This small Python module provides an xopen function that works like the built-in open function, but can also deal with compressed files. Supported compression formats are gzip, bzip2 and xz. They are automatically recognized by their file extensions .gz, .bz2 or .xz.

The focus is on being as efficient as possible on all supported Python versions. For example, xopen uses pigz, which is a parallel version of gzip, to open .gz files, which is faster than using the built-in gzip.open function. pigz can use multiple threads when compressing, but is also faster when reading .gz files, so it is used both for reading and writing if it is available. For gzip compression levels 1 to 3, igzip is used for an even greater speedup.

For use cases where using only the main thread is desired xopen can be used with threads=0. This will use python-isal (which binds isa-l) if python-isal is installed (automatic on Linux systems, as it is a requirement). For installation instructions for python-isal please checkout the python-isal homepage. If python-isal is not available gzip.open is used.

This module has originally been developed as part of the Cutadapt tool that is used in bioinformatics to manipulate sequencing data. It has been in successful use within that software for a few years.

xopen is compatible with Python versions 3.6 and later.

Usage

Open a file for reading:

from xopen import xopen

with xopen('file.txt.xz') as f:
    content = f.read()

Or without context manager:

from xopen import xopen

f = xopen('file.txt.xz')
content = f.read()
f.close()

Open a file in binary mode for writing:

from xopen import xopen

with xopen('file.txt.gz', mode='wb') as f:
    f.write(b'Hello')

Credits

The name xopen was taken from the C function of the same name in the utils.h file which is part of BWA.

Kyle Beauchamp <https://github.com/kyleabeauchamp/> has contributed support for appending to files.

Ruben Vorderman <https://github.com/rhpvorderman/> contributed improvements to make reading and writing gzipped files faster.

Benjamin Vaisvil <https://github.com/bvaisvil> contributed support for format detection from content.

Some ideas were taken from the canopener project. If you also want to open S3 files, you may want to use that module instead.

Changes

v1.1.0

  • Python 3.5 support is dropped.
  • On Linux systems, python-isal is now added as a requirement. This will speed up the reading of gzip files significantly when no external processes are used.

v1.0.0

  • If installed, the igzip program (part of Intel ISA-L) is now used for reading and writing gzip-compressed files at compression levels 1-3, which results in a significant speedup.

v0.9.0

  • When the file name extension of a file to be opened for reading is not available, the content is inspected (if possible) and used to determine which compression format applies.
  • This release drops Python 2.7 and 3.4 support. Python 3.5 or later is now required.

v0.8.4

  • When reading gzipped files, force pigz to use only a single process. pigz cannot use multiple cores anyway when decompressing. By default, it would use extra I/O processes, which slightly reduces wall-clock time, but increases CPU time. Single-core decompression with pigz is still about twice as fast as regular gzip.
  • Allow threads=0 for specifying that no external pigz/gzip process should be used (then regular gzip.open() is used instead).

v0.8.3

  • When reading gzipped files, let pigz use at most four threads by default. This limit previously only applied when writing to a file.
  • Support Python 3.8

v0.8.0

  • Speed improvements when iterating over gzipped files.

v0.6.0

  • For reading from gzipped files, xopen will now use a pigz subprocess. This is faster than using gzip.open.
  • Python 2 support will be dropped in one of the next releases.

v0.5.0

  • By default, pigz is now only allowed to use at most four threads. This hopefully reduces problems some users had with too many threads when opening many files at the same time.
  • xopen now accepts pathlib.Path objects.

Contributors

Links