Merge pull request #208 from stanleyondrus/patch-2

Update compatible-controllers.md - LedBox V3

Author: blazoncek

docs/basics/compatible-controllers.md

@@ -59,7 +59,7 @@ In the following some third-party controllers are listed. Please use a decent an
 [Laterna](https://github.com/Planet-Laterna/Laterna) | Based on an ESP32 for digital LED and RBG/RGBW LED strips with support for 5V, 12V and 24V LED strips. (Up to 4 channels)
 [Laterna Mini V3](https://github.com/Planet-Laterna/Laterna-mini-V3) | Small ESP32 based controller with optional digital microphone integrated for digital 5V LED strips.
 [Laterna Stick](https://github.com/Planet-Laterna/Laterna_Stick) | USB Stick like ESP32 based controller for digital 5V LED strips.
-[LedBox V2](https://stanleyprojects.com/projects/ledbox_v2/) | LedBox V2 by StanleyProjects is a fully contained, sound reactive, ESP32 based module for controlling 5-12V addressable LED strips (WS2812, SK6812, etc.), supporting both 3-(VDD,DAT,GND) and 4-(VDD,DAT,CLK,GND) pin configuration. It includes a digital MEMS microphone, button and IR control, and a safety resettable fuse, all in a compact 3D printable case. The board comes all setup, flashed with <a href=https://github.com/atuline/WLED>sound reactive WLED fork</a>, and can be purchased [here](https://www.tindie.com/products/stanleyprojects/ledbox-v2/).
+[LedBox V3](https://stanleyprojects.com/projects/ledbox_v3/) | LedBox V3 by StanleyProjects is the ultimate sound-reactive addressable LED controller powered by ESP32-S3. It is compatible with 5-12V addressable LED strips (WS281x, SK6812, etc.), supporting both 3(data) and 4(data,clock) wire signal protocols. It has a digital MEMS microphone, MOSFET, logic-level converter, button, IR demodulator, variable imedance-matching resistor, USB-C port, and a safety resettable fuse, all in a compact 3D printable case. The board can be purchased [here](https://www.tindie.com/products/stanleyprojects/ledbox-v3/) and comes flashed with [WLED-MM](https://github.com/MoonModules/WLED).
 [Luminxa v2.2.2](https://luminxa.com/product/luminxa-2-2-2/) | ESP32 | ESP32 Based board with 12 WS2812 LEDs Onboard (6 on each side) + Gyro Sensor (Business project)
 [My Baby's Got LED](https://tindie.com/products/mcqn_ltd/my-babys-got-led/)| [Certified open hardware](https://certification.oshwa.org/uk000030.html). Easy plug-and-play WLED board for those that don't want to figure out the hardware - you won't even need a screwdriver to get started. PC power supply ([ATX](https://en.wikipedia.org/wiki/ATX#:~:text=An%20ATX%20power%20supply%20provides,the%20original%2020-pin%20version.)) powers three 5V injection points on 8A fuses. For sale now on [Tindie](https://tindie.com/products/mcqn_ltd/my-babys-got-led/)! Full details on [the github repo](https://github.com/mcqn/my-babys-got-led) and [maker's website](https://mcqn.com/ibal223/).
 ![Gold Member](../assets/images/content/akemi_gold.png)<br/> [QuinLED Dig2go](https://quinled.info/quinled-dig2go/) | Designed to be the quickest and easiest 5v addressable LEDs controller available! Powered simply by using a USB-C input (just like your phone!) for a true plug and play experience. Recommended for small projects up to 15W and very complete with built-in "power cut" circuit when the LEDs are off to minimize idle power consumption, LED data level-shifter, built in protection circuits (including fuses), IR receiver, high quality digital microphone with audio reactive effects and even has some easy to use expansion ports for extra buttons or for instance an I2C screen! All of this is housed in a high-quality custom plastic case (not 3D printed) and small enough to fit in the palm of your hand! Comes ready to go, pre-flashed with WLED and even combined with power supply and/or LED strip in different bundles! [Buy here!](https://dig2go.info/dig2go-buying-page/)